Skip to content

L
linux
Commit 153755a7 authored by Al Viro's avatar Al Viro Committed by Mauro Carvalho Chehab
Browse files
Options

V4L/DVB (8135): WRITE_RPS1() converts to le32 itself 

... but two ancient drivers had not noticed.
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 9c169df8
Hide whitespace changes
Inline Side-by-side
Showing with 42 additions and 42 deletions
drivers/media/dvb/ttpci/av7110.c
View file @ 153755a7
......@@ -2402,18 +2402,18 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
saa7146_write(dev, MC1, MASK_29);
/* RPS1 timeout disable */
saa7146_write(dev, RPS_TOV1, 0);
WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
WRITE_RPS1(GPIO3_MSK);
WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
#if RPS_IRQ
/* issue RPS1 interrupt to increment counter */
WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
WRITE_RPS1(CMD_INTERRUPT);
#endif
WRITE_RPS1(cpu_to_le32(CMD_STOP));
WRITE_RPS1(CMD_STOP);
/* Jump to begin of RPS program as safety measure (p37) */
WRITE_RPS1(cpu_to_le32(CMD_JUMP));
WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
WRITE_RPS1(CMD_JUMP);
WRITE_RPS1(dev->d_rps1.dma_handle);
#if RPS_IRQ
/* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
......@@ -2526,28 +2526,28 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
count = 0;
/* Wait Source Line Counter Threshold (p36) */
WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
WRITE_RPS1(CMD_PAUSE | EVT_HS);
/* Set GPIO3=1 (p42) */
WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
WRITE_RPS1(GPIO3_MSK);
WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
#if RPS_IRQ
/* issue RPS1 interrupt */
WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
WRITE_RPS1(CMD_INTERRUPT);
#endif
/* Wait reset Source Line Counter Threshold (p36) */
WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
/* Set GPIO3=0 (p42) */
WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
WRITE_RPS1(GPIO3_MSK);
WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
#if RPS_IRQ
/* issue RPS1 interrupt */
WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
WRITE_RPS1(CMD_INTERRUPT);
#endif
/* Jump to begin of RPS program (p37) */
WRITE_RPS1(cpu_to_le32(CMD_JUMP));
WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
WRITE_RPS1(CMD_JUMP);
WRITE_RPS1(dev->d_rps1.dma_handle);
/* Fix VSYNC level */
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
......
drivers/media/dvb/ttpci/budget-patch.c
View file @ 153755a7
......@@ -431,22 +431,22 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
// in budget patch GPIO3 is connected to VSYNC_B
count = 0;
#if 0
WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
WRITE_RPS1(CMD_UPLOAD |
MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 );
#endif
WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
WRITE_RPS1(GPIO3_MSK);
WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
#if RPS_IRQ
// issue RPS1 interrupt to increment counter
WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
WRITE_RPS1(CMD_INTERRUPT);
// at least a NOP is neede between two interrupts
WRITE_RPS1(cpu_to_le32(CMD_NOP));
WRITE_RPS1(CMD_NOP);
// interrupt again
WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
WRITE_RPS1(CMD_INTERRUPT);
#endif
WRITE_RPS1(cpu_to_le32(CMD_STOP));
WRITE_RPS1(CMD_STOP);
#if RPS_IRQ
// set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
......@@ -558,28 +558,28 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
// Wait Source Line Counter Threshold (p36)
WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
WRITE_RPS1(CMD_PAUSE | EVT_HS);
// Set GPIO3=1 (p42)
WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
WRITE_RPS1(GPIO3_MSK);
WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
#if RPS_IRQ
// issue RPS1 interrupt
WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
WRITE_RPS1(CMD_INTERRUPT);
#endif
// Wait reset Source Line Counter Threshold (p36)
WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
// Set GPIO3=0 (p42)
WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
WRITE_RPS1(GPIO3_MSK);
WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
#if RPS_IRQ
// issue RPS1 interrupt
WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
WRITE_RPS1(CMD_INTERRUPT);
#endif
// Jump to begin of RPS program (p37)
WRITE_RPS1(cpu_to_le32(CMD_JUMP));
WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
WRITE_RPS1(CMD_JUMP);
WRITE_RPS1(dev->d_rps1.dma_handle);
// Fix VSYNC level
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7