Commit 1586342e authored by Kevin Cheng's avatar Kevin Cheng Committed by Mauro Carvalho Chehab

[media] em28xx: support for Hauppauge WinTV-dualHD 01595 ATSC/QAM

Hauppauge WinTV-dualHD model 01595 is a USB 2.0 dual ATSC/QAM tuner with
the following components:

USB bridge: Empia em28274
Demodulator: 2x LG LGDT3306a at addresses 0xb2 and 0x1c
Tuner: 2x Silicon Labs si2157 at addresses 0xc0 and 0xc4

This patch enables only the first tuner.
Signed-off-by: default avatarKevin Cheng <kcheng@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 4f751890
...@@ -509,6 +509,7 @@ static struct em28xx_reg_seq plex_px_bcud[] = { ...@@ -509,6 +509,7 @@ static struct em28xx_reg_seq plex_px_bcud[] = {
/* /*
* 2040:0265 Hauppauge WinTV-dualHD DVB * 2040:0265 Hauppauge WinTV-dualHD DVB
* 2040:026d Hauppauge WinTV-dualHD ATSC/QAM
* reg 0x80/0x84: * reg 0x80/0x84:
* GPIO_0: Yellow LED tuner 1, 0=on, 1=off * GPIO_0: Yellow LED tuner 1, 0=on, 1=off
* GPIO_1: Green LED tuner 1, 0=on, 1=off * GPIO_1: Green LED tuner 1, 0=on, 1=off
...@@ -2389,6 +2390,21 @@ struct em28xx_board em28xx_boards[] = { ...@@ -2389,6 +2390,21 @@ struct em28xx_board em28xx_boards[] = {
.ir_codes = RC_MAP_HAUPPAUGE, .ir_codes = RC_MAP_HAUPPAUGE,
.leds = hauppauge_dualhd_leds, .leds = hauppauge_dualhd_leds,
}, },
/*
* 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM).
* Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157
*/
[EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = {
.name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM",
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = hauppauge_dualhd_dvb,
.has_dvb = 1,
.ir_codes = RC_MAP_HAUPPAUGE,
.leds = hauppauge_dualhd_leds,
},
}; };
EXPORT_SYMBOL_GPL(em28xx_boards); EXPORT_SYMBOL_GPL(em28xx_boards);
...@@ -2514,6 +2530,8 @@ struct usb_device_id em28xx_id_table[] = { ...@@ -2514,6 +2530,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
{ USB_DEVICE(0x2040, 0x0265), { USB_DEVICE(0x2040, 0x0265),
.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
{ USB_DEVICE(0x2040, 0x026d),
.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
{ USB_DEVICE(0x0438, 0xb002), { USB_DEVICE(0x0438, 0xb002),
.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
{ USB_DEVICE(0x2001, 0xf112), { USB_DEVICE(0x2001, 0xf112),
...@@ -2945,6 +2963,7 @@ static void em28xx_card_setup(struct em28xx *dev) ...@@ -2945,6 +2963,7 @@ static void em28xx_card_setup(struct em28xx *dev)
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595:
{ {
struct tveeprom tv; struct tveeprom tv;
......
...@@ -37,6 +37,7 @@ ...@@ -37,6 +37,7 @@
#include "lgdt330x.h" #include "lgdt330x.h"
#include "lgdt3305.h" #include "lgdt3305.h"
#include "lgdt3306a.h"
#include "zl10353.h" #include "zl10353.h"
#include "s5h1409.h" #include "s5h1409.h"
#include "mt2060.h" #include "mt2060.h"
...@@ -920,6 +921,17 @@ static struct tda18271_config pinnacle_80e_dvb_config = { ...@@ -920,6 +921,17 @@ static struct tda18271_config pinnacle_80e_dvb_config = {
.role = TDA18271_MASTER, .role = TDA18271_MASTER,
}; };
static struct lgdt3306a_config hauppauge_01595_lgdt3306a_config = {
.qam_if_khz = 4000,
.vsb_if_khz = 3250,
.spectral_inversion = 0,
.deny_i2c_rptr = 0,
.mpeg_mode = LGDT3306A_MPEG_SERIAL,
.tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
.tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
.xtalMHz = 25,
};
/* ------------------------------------------------------------------ */ /* ------------------------------------------------------------------ */
static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev) static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev)
...@@ -1950,6 +1962,68 @@ static int em28xx_dvb_init(struct em28xx *dev) ...@@ -1950,6 +1962,68 @@ static int em28xx_dvb_init(struct em28xx *dev)
} }
break; break;
case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595:
{
struct i2c_adapter *adapter;
struct i2c_client *client;
struct i2c_board_info info = {};
struct lgdt3306a_config lgdt3306a_config;
struct si2157_config si2157_config = {};
/* attach demod */
lgdt3306a_config = hauppauge_01595_lgdt3306a_config;
lgdt3306a_config.fe = &dvb->fe[0];
lgdt3306a_config.i2c_adapter = &adapter;
strlcpy(info.type, "lgdt3306a", sizeof(info.type));
info.addr = 0x59;
info.platform_data = &lgdt3306a_config;
request_module(info.type);
client = i2c_new_device(&dev->i2c_adap[dev->def_i2c_bus],
&info);
if (client == NULL || client->dev.driver == NULL) {
result = -ENODEV;
goto out_free;
}
if (!try_module_get(client->dev.driver->owner)) {
i2c_unregister_device(client);
result = -ENODEV;
goto out_free;
}
dvb->i2c_client_demod = client;
/* attach tuner */
si2157_config.fe = dvb->fe[0];
si2157_config.if_port = 1;
si2157_config.inversion = 1;
#ifdef CONFIG_MEDIA_CONTROLLER_DVB
si2157_config.mdev = dev->media_dev;
#endif
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "si2157", sizeof(info.type));
info.addr = 0x60;
info.platform_data = &si2157_config;
request_module(info.type);
client = i2c_new_device(adapter, &info);
if (client == NULL || client->dev.driver == NULL) {
module_put(dvb->i2c_client_demod->dev.driver->owner);
i2c_unregister_device(dvb->i2c_client_demod);
result = -ENODEV;
goto out_free;
}
if (!try_module_get(client->dev.driver->owner)) {
i2c_unregister_device(client);
module_put(dvb->i2c_client_demod->dev.driver->owner);
i2c_unregister_device(dvb->i2c_client_demod);
result = -ENODEV;
goto out_free;
}
dvb->i2c_client_tuner = client;
}
break;
default: default:
dev_err(&dev->intf->dev, dev_err(&dev->intf->dev,
"The frontend of your DVB/ATSC card isn't supported yet\n"); "The frontend of your DVB/ATSC card isn't supported yet\n");
......
...@@ -147,6 +147,7 @@ ...@@ -147,6 +147,7 @@
#define EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 97 #define EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 97
#define EM28178_BOARD_PLEX_PX_BCUD 98 #define EM28178_BOARD_PLEX_PX_BCUD 98
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB 99 #define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB 99
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 100
/* Limits minimum and default number of buffers */ /* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4 #define EM28XX_MIN_BUF 4
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment