Skip to content

L
linux
Commit 159b0104 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge bk://linuxusb.bkbits.net/pci_hp-2.5 

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
parents b6a3d01f 441a1393
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1580 additions and 762 deletions
drivers/hotplug/cpqphp.h
View file @ 159b0104
......@@ -292,16 +292,14 @@ struct controller {
struct pci_resource *io_head;
struct pci_resource *bus_head;
struct pci_dev *pci_dev;
struct pci_ops *pci_ops;
struct pci_bus *pci_bus;
struct proc_dir_entry* proc_entry;
struct proc_dir_entry* proc_entry2;
struct event_info event_queue[10];
struct slot *slot;
u8 next_event;
u8 interrupt;
u8 bus;
u8 device;
u8 function;
u8 bus; /* bus number for the pci hotplug controller */
u8 rev;
u8 slot_device_offset;
u8 first_slot;
......@@ -695,7 +693,8 @@ static inline int cpq_get_latch_status (struct controller *ctrl, struct slot *sl
return 1;
hp_slot = slot->device - ctrl->slot_device_offset;
dbg(__FUNCTION__": slot->device = %d, ctrl->slot_device_offset = %d \n", slot->device, ctrl->slot_device_offset);
dbg("%s: slot->device = %d, ctrl->slot_device_offset = %d \n",
__FUNCTION__, slot->device, ctrl->slot_device_offset);
status = (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot));
......@@ -733,7 +732,7 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl)
DECLARE_WAITQUEUE(wait, current);
int retval = 0;
dbg(__FUNCTION__" - start\n");
dbg("%s - start\n", __FUNCTION__);
add_wait_queue(&ctrl->queue, &wait);
set_current_state(TASK_INTERRUPTIBLE);
/* Sleep for up to 1 second to wait for the LED to change. */
......@@ -743,7 +742,7 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl)
if (signal_pending(current))
retval = -EINTR;
dbg(__FUNCTION__" - end\n");
dbg("%s - end\n", __FUNCTION__);
return retval;
}
......
drivers/hotplug/cpqphp_core.c
View file @ 159b0104
......@@ -314,7 +314,7 @@ static int ctrl_slot_setup (struct controller * ctrl, void *smbios_start, void *
void *slot_entry= NULL;
int result;
dbg(__FUNCTION__"\n");
dbg("%s\n", __FUNCTION__);
tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
......@@ -467,7 +467,7 @@ static int ctrl_slot_cleanup (struct controller * ctrl)
//
// Output: SUCCESS or FAILURE
//=============================================================================
static int get_slot_mapping (struct pci_ops *ops, u8 bus_num, u8 dev_num, u8 *slot)
static int get_slot_mapping (struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
{
struct irq_routing_table *PCIIRQRoutingInfoLength;
u32 work;
......@@ -476,7 +476,7 @@ static int get_slot_mapping (struct pci_ops *ops, u8 bus_num, u8 dev_num, u8 *sl
u8 tbus, tdevice, tslot, bridgeSlot;
dbg(__FUNCTION__" %p, %d, %d, %p\n", ops, bus_num, dev_num, slot);
dbg("%s: %p, %d, %d, %p\n", __FUNCTION__, bus, bus_num, dev_num, slot);
bridgeSlot = 0xFF;
......@@ -490,7 +490,6 @@ static int get_slot_mapping (struct pci_ops *ops, u8 bus_num, u8 dev_num, u8 *sl
return -1;
}
for (loop = 0; loop < len; ++loop) {
tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn >> 3;
......@@ -499,7 +498,8 @@ static int get_slot_mapping (struct pci_ops *ops, u8 bus_num, u8 dev_num, u8 *sl
if ((tbus == bus_num) && (tdevice == dev_num)) {
*slot = tslot;
if (PCIIRQRoutingInfoLength != NULL) kfree(PCIIRQRoutingInfoLength );
if (PCIIRQRoutingInfoLength != NULL)
kfree(PCIIRQRoutingInfoLength);
return 0;
} else {
// Didn't get a match on the target PCI device. Check if the
......@@ -508,10 +508,11 @@ static int get_slot_mapping (struct pci_ops *ops, u8 bus_num, u8 dev_num, u8 *sl
// device, I need to save the bridge's slot number. If I can't
// find an entry for the target device, I will have to assume it's
// on the other side of the bridge, and assign it the bridge's slot.
pci_read_config_dword_nodev (ops, tbus, tdevice, 0, PCI_REVISION_ID, &work);
bus->number = tbus;
pci_bus_read_config_dword (bus, PCI_DEVFN(tdevice, 0), PCI_REVISION_ID, &work);
if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
pci_read_config_dword_nodev (ops, tbus, tdevice, 0, PCI_PRIMARY_BUS, &work);
pci_bus_read_config_dword (bus, PCI_DEVFN(tdevice, 0), PCI_PRIMARY_BUS, &work);
// See if bridge's secondary bus matches target bus.
if (((work >> 8) & 0x000000FF) == (long) bus_num) {
bridgeSlot = tslot;
......@@ -521,7 +522,6 @@ static int get_slot_mapping (struct pci_ops *ops, u8 bus_num, u8 dev_num, u8 *sl
}
// If we got here, we didn't find an entry in the IRQ mapping table
// for the target PCI device. If we did determine that the target
// device is on the other side of a PCI-to-PCI bridge, return the
......@@ -592,7 +592,7 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
......@@ -627,7 +627,7 @@ static int process_SI (struct hotplug_slot *hotplug_slot)
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
......@@ -667,7 +667,7 @@ static int process_SS (struct hotplug_slot *hotplug_slot)
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
......@@ -695,7 +695,7 @@ static int hardware_test (struct hotplug_slot *hotplug_slot, u32 value)
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;
dbg(__FUNCTION__"\n");
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
if (slot == NULL)
return -ENODEV;
......@@ -716,7 +716,7 @@ static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value)
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
......@@ -734,7 +734,7 @@ static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value)
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
......@@ -752,7 +752,7 @@ static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value)
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
......@@ -770,8 +770,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
......@@ -820,7 +820,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
if (rc) {
err(__FUNCTION__" : pci_read_config_word failed\n");
err("%s : pci_read_config_word failed\n", __FUNCTION__);
return rc;
}
dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
......@@ -831,14 +831,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL);
if (!ctrl) {
err(__FUNCTION__" : out of memory\n");
err("%s : out of memory\n", __FUNCTION__);
return -ENOMEM;
}
memset(ctrl, 0, sizeof(struct controller));
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
if (rc) {
err(__FUNCTION__" : pci_read_config_word failed\n");
err("%s : pci_read_config_word failed\n", __FUNCTION__);
goto err_free_ctrl;
}
......@@ -991,12 +991,20 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dbg (" pcix_support %s\n", ctrl->pcix_support == 0 ? "not supported" : "supported");
ctrl->pci_dev = pdev;
ctrl->pci_ops = pdev->bus->ops;
/* make our own copy of the pci bus structure, as we like tweaking it a lot */
ctrl->pci_bus = kmalloc (sizeof (*ctrl->pci_bus), GFP_KERNEL);
if (!ctrl->pci_bus) {
err("out of memory\n");
rc = -ENOMEM;
goto err_free_ctrl;
}
memcpy (ctrl->pci_bus, pdev->bus, sizeof (*ctrl->pci_bus));
ctrl->bus = pdev->bus->number;
ctrl->device = PCI_SLOT(pdev->devfn);
ctrl->function = PCI_FUNC(pdev->devfn);
ctrl->rev = rev;
dbg("bus device function rev: %d %d %d %d\n", ctrl->bus, ctrl->device, ctrl->function, ctrl->rev);
dbg("bus device function rev: %d %d %d %d\n", ctrl->bus,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), ctrl->rev);
init_MUTEX(&ctrl->crit_sect);
init_waitqueue_head(&ctrl->queue);
......@@ -1004,7 +1012,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* initialize our threads if they haven't already been started up */
rc = one_time_init();
if (rc) {
goto err_free_ctrl;
goto err_free_bus;
}
dbg("pdev = %p\n", pdev);
......@@ -1015,7 +1023,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_resource_len(pdev, 0), MY_NAME)) {
err("cannot reserve MMIO region\n");
rc = -ENOMEM;
goto err_free_ctrl;
goto err_free_bus;
}
ctrl->hpc_reg = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
......@@ -1043,7 +1051,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
// in this case it will always be called for the "base"
// bus/dev/func of a slot.
// CS: this is leveraging the PCIIRQ routing code from the kernel (pci-pc.c: get_irq_routing_table)
rc = get_slot_mapping(ctrl->pci_ops, pdev->bus->number, (readb(ctrl->hpc_reg + SLOT_MASK) >> 4), &(ctrl->first_slot));
rc = get_slot_mapping(ctrl->pci_bus, pdev->bus->number, (readb(ctrl->hpc_reg + SLOT_MASK) >> 4), &(ctrl->first_slot));
dbg("get_slot_mapping: first_slot = %d, returned = %d\n", ctrl->first_slot, rc);
if (rc) {
err(msg_initialization_err, rc);
......@@ -1053,7 +1061,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
// Store PCI Config Space for all devices on this bus
rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
if (rc) {
err(__FUNCTION__": unable to save PCI configuration data, error %d\n", rc);
err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc);
goto err_iounmap;
}
......@@ -1080,7 +1088,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
rc = ctrl_slot_setup(ctrl, smbios_start, smbios_table);
if (rc) {
err(msg_initialization_err, 6);
err(__FUNCTION__": unable to save PCI configuration data, error %d\n", rc);
err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc);
goto err_iounmap;
}
......@@ -1188,6 +1196,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
iounmap(ctrl->hpc_reg);
err_free_mem_region:
release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
err_free_bus:
kfree(ctrl->pci_bus);
err_free_ctrl:
kfree(ctrl);
return rc;
......@@ -1328,6 +1338,8 @@ static void unload_cpqphpd(void)
kfree(tres);
}
kfree (ctrl->pci_bus);
tctrl = ctrl;
ctrl = ctrl->next;
kfree(tctrl);
......
drivers/hotplug/cpqphp_ctrl.c
View file @ 159b0104
This diff is collapsed.
drivers/hotplug/cpqphp_nvram.c
View file @ 159b0104
......@@ -161,7 +161,7 @@ static int check_for_compaq_ROM (void *rom_start)
(temp6 == 'Q')) {
result = 1;
}
dbg (__FUNCTION__" - returned %d\n", result);
dbg ("%s - returned %d\n", __FUNCTION__, result);
return result;
}
......@@ -286,12 +286,12 @@ static u32 store_HRT (void *rom_start)
return(rc);
// The device Number
rc = add_byte( &pFill, ctrl->device, &usedbytes, &available);
rc = add_byte( &pFill, PCI_SLOT(ctrl->pci_dev->devfn), &usedbytes, &available);
if (rc)
return(rc);
// The function Number
rc = add_byte( &pFill, ctrl->function, &usedbytes, &available);
rc = add_byte( &pFill, PCI_FUNC(ctrl->pci_dev->devfn), &usedbytes, &available);
if (rc)
return(rc);
......@@ -479,8 +479,9 @@ int compaq_nvram_load (void *rom_start, struct controller *ctrl)
device = p_ev_ctrl->device;
function = p_ev_ctrl->function;
while ((bus != ctrl->bus) || (device != ctrl->device)
|| (function != ctrl->function)) {
while ((bus != ctrl->bus) ||
(device != PCI_SLOT(ctrl->pci_dev->devfn)) ||
(function != PCI_FUNC(ctrl->pci_dev->devfn))) {
nummem = p_ev_ctrl->mem_avail;
numpmem = p_ev_ctrl->p_mem_avail;
numio = p_ev_ctrl->io_avail;
......
drivers/hotplug/cpqphp_pci.c
View file @ 159b0104
This diff is collapsed.
drivers/hotplug/cpqphp_proc.c
View file @ 159b0104
......@@ -53,8 +53,9 @@ static int read_ctrl (char *buf, char **start, off_t offset, int len, int *eof,
*eof = 1;
out += sprintf(out, "hot plug ctrl Info Page\n");
out += sprintf(out, "bus = %d, device = %d, function = %d\n",ctrl->bus,
ctrl->device, ctrl->function);
out += sprintf(out, "bus = %d, device = %d, function = %d\n",
ctrl->bus, PCI_SLOT(ctrl->pci_dev->devfn),
PCI_FUNC(ctrl->pci_dev->devfn));
out += sprintf(out, "Free resources: memory\n");
index = 11;
res = ctrl->mem_head;
......@@ -104,8 +105,9 @@ static int read_dev (char *buf, char **start, off_t offset, int len, int *eof, v
*eof = 1;
out += sprintf(out, "hot plug ctrl Info Page\n");
out += sprintf(out, "bus = %d, device = %d, function = %d\n",ctrl->bus,
ctrl->device, ctrl->function);
out += sprintf(out, "bus = %d, device = %d, function = %d\n",
ctrl->bus, PCI_SLOT(ctrl->pci_dev->devfn),
PCI_FUNC(ctrl->pci_dev->devfn));
slot=ctrl->slot;
......
drivers/hotplug/ibmphp.h
View file @ 159b0104
......@@ -39,7 +39,8 @@ extern int ibmphp_debug;
#else
#define MY_NAME THIS_MODULE->name
#endif
#define debug(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
#define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
#define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format , MY_NAME , ## arg)
......@@ -121,6 +122,7 @@ struct scal_detail {
u8 port1_port_connect;
u8 port2_node_connect;
u8 port2_port_connect;
u8 chassis_num;
// struct list_head scal_detail_list;
};
......@@ -139,9 +141,27 @@ struct rio_detail {
u8 port1_port_connect;
u8 first_slot_num;
u8 status;
// struct list_head rio_detail_list;
u8 wpindex;
u8 chassis_num;
struct list_head rio_detail_list;
};
struct opt_rio {
u8 rio_type;
u8 chassis_num;
u8 first_slot_num;
u8 middle_num;
struct list_head opt_rio_list;
};
struct opt_rio_lo {
u8 rio_type;
u8 chassis_num;
u8 first_slot_num;
u8 middle_num;
u8 pack_count;
struct list_head opt_rio_lo_list;
};
/****************************************************************
* HPC DESCRIPTOR NODE *
......@@ -153,7 +173,6 @@ struct ebda_hpc_list {
short phys_addr;
// struct list_head ebda_hpc_list;
};
/*****************************************************************
* IN HPC DATA STRUCTURE, THE ASSOCIATED SLOT AND BUS *
* STRUCTURE *
......@@ -195,6 +214,9 @@ struct wpeg_i2c_ctlr_access {
u8 i2c_addr;
};
#define HPC_DEVICE_ID 0x0246
#define HPC_SUBSYSTEM_ID 0x0247
#define HPC_PCI_OFFSET 0x40
/*************************************************************************
* RSTC DESCRIPTOR NODE *
*************************************************************************/
......@@ -215,8 +237,9 @@ struct ebda_pci_rsrc {
u8 rsrc_type;
u8 bus_num;
u8 dev_fun;
ulong start_addr;
ulong end_addr;
u32 start_addr;
u32 end_addr;
u8 marked; /* for NVRAM */
struct list_head ebda_pci_rsrc_list;
};
......@@ -248,7 +271,7 @@ struct bus_info {
***********************************************************/
extern struct list_head ibmphp_ebda_pci_rsrc_head;
extern struct list_head ibmphp_slot_head;
extern struct list_head ibmphp_res_head;
/***********************************************************
* FUNCTION PROTOTYPES *
***********************************************************/
......@@ -263,6 +286,7 @@ extern void ibmphp_free_ebda_pci_rsrc_queue (void);
extern struct bus_info *ibmphp_find_same_bus_num (u32);
extern int ibmphp_get_bus_index (u8);
extern u16 ibmphp_get_total_controllers (void);
extern int ibmphp_register_pci (void);
/* passed parameters */
#define MEM 0
......@@ -669,7 +693,7 @@ extern void ibmphp_hpc_stop_poll_thread (void);
#define PCIX66 0x05
#define PCI66 0x04
extern struct pci_ops *ibmphp_pci_root_ops;
extern struct pci_bus *ibmphp_pci_bus;
/* Variables */
......@@ -713,6 +737,7 @@ struct slot {
struct controller {
struct ebda_hpc_slot *slots;
struct ebda_hpc_bus *buses;
struct pci_dev *ctrl_dev; /* in case where controller is PCI */
u8 starting_slot_num; /* starting and ending slot #'s this ctrl controls*/
u8 ending_slot_num;
u8 revision;
......
drivers/hotplug/ibmphp_core.c
View file @ 159b0104
This diff is collapsed.
drivers/hotplug/ibmphp_ebda.c
View file @ 159b0104
This diff is collapsed.
drivers/hotplug/ibmphp_hpc.c
View file @ 159b0104
This diff is collapsed.
drivers/hotplug/ibmphp_pci.c
View file @ 159b0104
This diff is collapsed.
drivers/hotplug/ibmphp_res.c
View file @ 159b0104
This diff is collapsed.
drivers/hotplug/pci_hotplug.h
View file @ 159b0104
......@@ -141,20 +141,5 @@ extern int pci_visit_dev (struct pci_visit *fn,
struct pci_dev_wrapped *wrapped_dev,
struct pci_bus_wrapped *wrapped_parent);
extern int pci_read_config_byte_nodev (struct pci_ops *ops, u8 bus, u8 device,
u8 function, int where, u8 *val);
extern int pci_read_config_word_nodev (struct pci_ops *ops, u8 bus, u8 device,
u8 function, int where, u16 *val);
extern int pci_read_config_dword_nodev (struct pci_ops *ops, u8 bus, u8 device,
u8 function, int where, u32 *val);
extern int pci_write_config_byte_nodev (struct pci_ops *ops, u8 bus, u8 device,
u8 function, int where, u8 val);
extern int pci_write_config_word_nodev (struct pci_ops *ops, u8 bus, u8 device,
u8 function, int where, u16 val);
extern int pci_write_config_dword_nodev (struct pci_ops *ops, u8 bus, u8 device,
u8 function, int where, u32 val);
#endif
drivers/pci/Makefile
View file @ 159b0104
......@@ -6,10 +6,8 @@ export-objs := access.o hotplug.o pci-driver.o pci.o pool.o \
probe.o proc.o search.o compat.o
obj-y += access.o probe.o pci.o pool.o quirks.o \
compat.o names.o pci-driver.o search.o
compat.o names.o pci-driver.o search.o hotplug.o
obj-$(CONFIG_PM) += power.o
obj-$(CONFIG_HOTPLUG) += hotplug.o
obj-$(CONFIG_PROC_FS) += proc.o
ifndef CONFIG_SPARC64
......
drivers/pci/hotplug.c
View file @ 159b0104
......@@ -7,8 +7,8 @@
#define TRUE (!FALSE)
#endif
static void
run_sbin_hotplug(struct pci_dev *pdev, int insert)
#ifdef CONFIG_HOTPLUG
static void run_sbin_hotplug(struct pci_dev *pdev, int insert)
{
int i;
char *argv[3], *envp[8];
......@@ -45,13 +45,18 @@ run_sbin_hotplug(struct pci_dev *pdev, int insert)
call_usermodehelper (argv [0], argv, envp);
}
#else
static void run_sbin_hotplug(struct pci_dev *pdev, int insert) { }
#endif
/**
* pci_insert_device - insert a hotplug device
* pci_insert_device - insert a pci device
* @dev: the device to insert
* @bus: where to insert it
*
* Add a new device to the device lists and notify userspace (/sbin/hotplug).
* Link the device to both the global PCI device chain and the
* per-bus list of devices, add the /proc entry, and notify
* userspace (/sbin/hotplug).
*/
void
pci_insert_device(struct pci_dev *dev, struct pci_bus *bus)
......@@ -78,11 +83,11 @@ pci_free_resources(struct pci_dev *dev)
}
/**
* pci_remove_device - remove a hotplug device
* pci_remove_device - remove a pci device
* @dev: the device to remove
*
* Delete the device structure from the device lists and
* notify userspace (/sbin/hotplug).
* Delete the device structure from the device lists,
* remove the /proc entry, and notify userspace (/sbin/hotplug).
*/
void
pci_remove_device(struct pci_dev *dev)
......@@ -94,10 +99,11 @@ pci_remove_device(struct pci_dev *dev)
#ifdef CONFIG_PROC_FS
pci_proc_detach_device(dev);
#endif
/* notify userspace of hotplug device removal */
run_sbin_hotplug(dev, FALSE);
}
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pci_insert_device);
EXPORT_SYMBOL(pci_remove_device);
#endif
drivers/pci/probe.c
View file @ 159b0104
......@@ -479,10 +479,10 @@ struct pci_dev * __devinit pci_scan_slot(struct pci_dev *temp)
/*
* Link the device to both the global PCI device chain and
* the per-bus list of devices.
* the per-bus list of devices and call /sbin/hotplug if we
* should.
*/
list_add_tail(&dev->global_list, &pci_devices);
list_add_tail(&dev->bus_list, &bus->devices);
pci_insert_device (dev, bus);
/* Fix up broken headers */
pci_fixup_device(PCI_FIXUP_HEADER, dev);
......@@ -594,4 +594,5 @@ EXPORT_SYMBOL(pci_setup_device);
EXPORT_SYMBOL(pci_add_new_bus);
EXPORT_SYMBOL(pci_do_scan_bus);
EXPORT_SYMBOL(pci_scan_slot);
EXPORT_SYMBOL(pci_scan_bus);
#endif
drivers/pci/proc.c
View file @ 159b0104
......@@ -18,6 +18,8 @@
#define PCI_CFG_SPACE_SIZE 256
static int proc_initialized; /* = 0 */
static loff_t
proc_bus_pci_lseek(struct file *file, loff_t off, int whence)
{
......@@ -410,6 +412,9 @@ int pci_proc_attach_device(struct pci_dev *dev)
struct proc_dir_entry *de, *e;
char name[16];
if (!proc_initialized)
return -EACCES;
if (!(de = bus->procdir)) {
sprintf(name, "%02x", bus->number);
de = bus->procdir = proc_mkdir(name, proc_bus_pci_dir);
......@@ -446,6 +451,9 @@ int pci_proc_attach_bus(struct pci_bus* bus)
{
struct proc_dir_entry *de = bus->procdir;
if (!proc_initialized)
return -EACCES;
if (!de) {
char name[16];
sprintf(name, "%02x", bus->number);
......@@ -595,6 +603,7 @@ static int __init pci_proc_init(void)
entry = create_proc_entry("devices", 0, proc_bus_pci_dir);
if (entry)
entry->proc_fops = &proc_bus_pci_dev_operations;
proc_initialized = 1;
pci_for_each_dev(dev) {
pci_proc_attach_device(dev);
}
......
include/linux/pci.h
View file @ 159b0104
......@@ -634,7 +634,6 @@ void pci_insert_device(struct pci_dev *, struct pci_bus *);
void pci_remove_device(struct pci_dev *);
struct pci_driver *pci_dev_driver(const struct pci_dev *);
const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev);
void pci_announce_device_to_drivers(struct pci_dev *);
unsigned int pci_do_scan_bus(struct pci_bus *bus);
struct pci_bus * pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7