[media] tm6000: Fix IR register names

IR registers 0xd9 to 0xdf were badly named, making harder to
check what's the register accessed at the RC code. Fix the
name convention.

No functional changes on this patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/tm6000/tm6000-core.c

@@ -536,16 +536,16 @@ static struct reg_init tm6010_init_tab[] = {
 
 	{ TM6010_REQ05_R18_IMASK7, 0x00 },
 
-	{ TM6010_REQ07_RD8_IR_LEADER1, 0xaa },
-	{ TM6010_REQ07_RD8_IR_LEADER0, 0x30 },
-	{ TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20 },
-	{ TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0 },
+	{ TM6010_REQ07_RDC_IR_LEADER1, 0xaa },
+	{ TM6010_REQ07_RDD_IR_LEADER0, 0x30 },
+	{ TM6010_REQ07_RDE_IR_PULSE_CNT1, 0x20 },
+	{ TM6010_REQ07_RDF_IR_PULSE_CNT0, 0xd0 },
 	{ REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 },
 	{ TM6010_REQ07_RD8_IR, 0x2f },
 
 	/* set remote wakeup key:any key wakeup */
 	{ TM6010_REQ07_RE5_REMOTE_WAKEUP,  0xfe },
-	{ TM6010_REQ07_RD8_IR_WAKEUP_SEL,  0xff },
+	{ TM6010_REQ07_RDA_IR_WAKEUP_SEL,  0xff },
 };
 
 int tm6000_init(struct tm6000_core *dev)

drivers/media/video/tm6000/tm6000-input.c

@@ -100,17 +100,17 @@ static int tm6000_ir_config(struct tm6000_IR *ir)
 	case RC_TYPE_NEC:
 		/* Setup IR decoder for NEC standard 12MHz system clock */
 		/* IR_LEADER_CNT = 0.9ms             */
-		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER1, 0xaa);
-		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER0, 0x30);
+		tm6000_set_reg(dev, TM6010_REQ07_RDC_IR_LEADER1, 0xaa);
+		tm6000_set_reg(dev, TM6010_REQ07_RDD_IR_LEADER0, 0x30);
 		/* IR_PULSE_CNT = 0.7ms              */
-		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20);
-		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0);
+		tm6000_set_reg(dev, TM6010_REQ07_RDE_IR_PULSE_CNT1, 0x20);
+		tm6000_set_reg(dev, TM6010_REQ07_RDF_IR_PULSE_CNT0, 0xd0);
 		/* Remote WAKEUP = enable */
 		tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
 		/* IR_WKUP_SEL = Low byte in decoded IR data */
-		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff);
+		tm6000_set_reg(dev, TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff);
 		/* IR_WKU_ADD code */
-		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_ADD, 0xff);
+		tm6000_set_reg(dev, TM6010_REQ07_RDB_IR_WAKEUP_ADD, 0xff);
 		tm6000_flash_led(dev, 0);
 		msleep(100);
 		tm6000_flash_led(dev, 1);

drivers/media/video/tm6000/tm6000-regs.h

@@ -284,19 +284,19 @@ enum {
 /* ONLY for TM6010 */
 #define TM6010_REQ07_RD8_IR				0x07, 0xd8
 /* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_BSIZE			0x07, 0xd9
+#define TM6010_REQ07_RD9_IR_BSIZE			0x07, 0xd9
 /* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_WAKEUP_SEL			0x07, 0xda
+#define TM6010_REQ07_RDA_IR_WAKEUP_SEL			0x07, 0xda
 /* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_WAKEUP_ADD			0x07, 0xdb
+#define TM6010_REQ07_RDB_IR_WAKEUP_ADD			0x07, 0xdb
 /* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_LEADER1			0x07, 0xdc
+#define TM6010_REQ07_RDC_IR_LEADER1			0x07, 0xdc
 /* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_LEADER0			0x07, 0xdd
+#define TM6010_REQ07_RDD_IR_LEADER0			0x07, 0xdd
 /* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_PULSE_CNT1			0x07, 0xde
+#define TM6010_REQ07_RDE_IR_PULSE_CNT1			0x07, 0xde
 /* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_PULSE_CNT0			0x07, 0xdf
+#define TM6010_REQ07_RDF_IR_PULSE_CNT0			0x07, 0xdf
 /* ONLY for TM6010 */
 #define TM6010_REQ07_RE0_DVIDEO_SOURCE			0x07, 0xe0
 /* ONLY for TM6010 */