[PATCH] bring 2.5 arcnet into line with 2.4

Fixes a request region breakage
Fixes a size request error
Handles a new card type

drivers/net/arcnet/com20020-pci.c

 /*
- * Linux ARCnet driver - COM20020 PCI support (Contemporary Controls PCI20)
+ * Linux ARCnet driver - COM20020 PCI support
+ * Contemporary Controls PCI20 and SOHARD SH-ARC PCI
  * 
  * Written 1994-1999 by Avery Pennarun,
  *    based on an ISA version by David Woodhouse.
@@ -86,7 +87,21 @@ static int __devinit com20020pci_probe(struct pci_dev *pdev, const struct pci_de
 	memset(lp, 0, sizeof(struct arcnet_local));
 	pci_set_drvdata(pdev, dev);
 
-	ioaddr = pci_resource_start(pdev, 2);
+	// SOHARD needs PCI base addr 4
+	if (pdev->vendor==0x10B5) {
+		BUGMSG(D_NORMAL, "SOHARD\n");
+		ioaddr = pci_resource_start(pdev, 4);
+	}
+	else {
+		BUGMSG(D_NORMAL, "Contemporary Controls\n");
+		ioaddr = pci_resource_start(pdev, 2);
+	}
+
+	// Dummy access after Reset
+	// ARCNET controller needs this access to detect bustype
+	outb(0x00,ioaddr+1);
+	inb(ioaddr+1);
+
 	dev->base_addr = ioaddr;
 	dev->irq = pdev->irq;
 	dev->dev_addr[0] = node;
@@ -152,6 +167,7 @@ static struct pci_device_id com20020pci_id_table[] __devinitdata = {
 	{ 0x1571, 0xa204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x1571, 0xa205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x1571, 0xa206, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
+	{ 0x10B5, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{0,}
 };
 

drivers/net/arcnet/com20020.c

@@ -98,6 +98,10 @@ int __devinit com20020_check(struct net_device *dev)
 	lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
 	lp->setup2 = (lp->clockm << 4) | 8;
 
+	/* CHECK: should we do this for SOHARD cards ? */
+	/* Enable P1Mode for backplane mode */
+	lp->setup = lp->setup | P1MODE;
+
 	SET_SUBADR(SUB_SETUP1);
 	outb(lp->setup, _XREG);
 
@@ -202,7 +206,7 @@ int __devinit com20020_found(struct net_device *dev, int shared)
 		return -ENODEV;
 	}
 	/* reserve the I/O region */
-	if (request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) {
+	if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) {
 		free_irq(dev->irq, dev);
 		return -EBUSY;
 	}
@@ -300,8 +304,9 @@ static void com20020_openclose(struct net_device *dev, bool open)
 	struct arcnet_local *lp = (struct arcnet_local *) dev->priv;
 	int ioaddr = dev->base_addr;
 
-	if (open)
+	if (open) {
 		MOD_INC_USE_COUNT;
+	}
 	else {
 		/* disable transmitter */
 		lp->config &= ~TXENcfg;