ARC: merge HAPS-HS with nSIM-HS configs

Starting from nSIM 2019.06 is possible to use DW UART
instead of ARC UART. That allows us to merge
"nsim_hs" with "haps_hs" and "nsim_hs_smp" with "haps_hs_smp"
with minor changes which were done in previous commits.

We eliminate nsim_hs_defconfig and nsim_hs_smp_defconfig
and leave haps_hs_defconfig and haps_hs_smp_defconfig
which can be used on HAPS / nSIM / ZEBU / QEMU platforms
without additional changes in Linux kernel.

For nSIM we should now use UART property values
"-prop=nsim_mem-dev=uart0,kind=dwuart,base=0xf0000000"
instead of previously used
"-prop=nsim_mem-dev=uart0,base=0xc0fc1000"
"use_connect" and "irq" values of UART property remains untouched.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

arch/arc/Makefile

@@ -3,7 +3,7 @@
 # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
 #
 
-KBUILD_DEFCONFIG := nsim_hs_defconfig
+KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
 CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)

arch/arc/boot/dts/nsim_hs.dts

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
- */
-/dts-v1/;
-
-/include/ "skeleton_hs.dtsi"
-
-/ {
-	model = "snps,nsim_hs";
-	compatible = "snps,nsim_hs";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&core_intc>;
-
-	memory {
-		device_type = "memory";
-		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
-		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MB low mem */
-		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
-	};
-
-	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
-	};
-
-	aliases {
-		serial0 = &arcuart0;
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* only perip space at end of low mem accessible
-			 bus addr,   parent bus addr, size */
-		ranges = <0x80000000 0x0 0x80000000 0x80000000>;
-
-		core_clk: core_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <80000000>;
-		};
-
-		core_intc: core-interrupt-controller {
-			compatible = "snps,archs-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		arcuart0: serial@c0fc1000 {
-			compatible = "snps,arc-uart";
-			reg = <0xc0fc1000 0x100>;
-			interrupts = <24>;
-			clock-frequency = <80000000>;
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		arcpct0: pct {
-			compatible = "snps,archs-pct";
-			#interrupt-cells = <1>;
-			interrupts = <20>;
-		};
-	};
-};

arch/arc/boot/dts/nsim_hs_idu.dts

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
- */
-/dts-v1/;
-
-/include/ "skeleton_hs_idu.dtsi"
-
-/ {
-	model = "snps,nsim_hs-smp";
-	compatible = "snps,nsim_hs";
-	interrupt-parent = <&core_intc>;
-
-	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
-	};
-
-	aliases {
-		serial0 = &arcuart0;
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* child and parent address space 1:1 mapped */
-		ranges;
-
-		core_clk: core_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <80000000>;
-		};
-
-		core_intc: core-interrupt-controller {
-			compatible = "snps,archs-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		idu_intc: idu-interrupt-controller {
-			compatible = "snps,archs-idu-intc";
-			interrupt-controller;
-			interrupt-parent = <&core_intc>;
-			#interrupt-cells = <1>;
-		};
-
-		arcuart0: serial@c0fc1000 {
-			compatible = "snps,arc-uart";
-			reg = <0xc0fc1000 0x100>;
-			interrupt-parent = <&idu_intc>;
-			interrupts = <0>;
-			clock-frequency = <80000000>;
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		arcpct0: pct {
-			compatible = "snps,archs-pct";
-			#interrupt-cells = <1>;
-			interrupts = <20>;
-		};
-	};
-};

arch/arc/configs/nsim_hs_defconfig

-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs"
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_COMPACTION is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_DEVTMPFS=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ARC=y
-CONFIG_SERIAL_ARC_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/nsim_hs_smp_defconfig

-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_COMPACTION is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_DEVTMPFS=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ARC=y
-CONFIG_SERIAL_ARC_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set

arch/arc/plat-sim/platform.c

@@ -21,7 +21,6 @@ static const char *simulation_compat[] __initconst = {
 	"snps,nsim",
 	"snps,nsimosci",
 #else
-	"snps,nsim_hs",
 	"snps,nsimosci_hs",
 	"snps,zebu_hs",
 #endif