Skip to content

L
linux
Commit 16a5517c authored by Marc Zyngier's avatar Marc Zyngier Committed by Stephen Hemminger
Browse files
Options

[PATCH] depca update 

I finally found some time to hack the depca driver, in basically the
same way I did with the de4x5 driver. The patch is quite big (shuffles
a lot of code around, removes lots of global variables), mainly in
order to use the driver model on every bus supported by this driver.

I also removed the probing from Space.c, so the usual warning about
device renumbering applies.

Tested on alpha (DE422, EISA) and i386 (two DE201, ISA), built-in and
modular. The MCA part is completly untested, since I lack the hardware
(no, I do not own every single piece of junk hardware out
there... ;-).
parent 157e3d70
Show whitespace changes
Inline Side-by-side
Showing with 462 additions and 484 deletions
drivers/net/Space.c
View file @ 16a5517c
...@@ -58,7 +58,6 @@ extern int at1500_probe(struct net_device *); ...@@ -58,7 +58,6 @@ extern int at1500_probe(struct net_device *);
extern int at1700_probe(struct net_device *); extern int at1700_probe(struct net_device *);
extern int fmv18x_probe(struct net_device *); extern int fmv18x_probe(struct net_device *);
extern int eth16i_probe(struct net_device *); extern int eth16i_probe(struct net_device *);
extern int depca_probe(struct net_device *);
extern int i82596_probe(struct net_device *); extern int i82596_probe(struct net_device *);
extern int ewrk3_probe(struct net_device *); extern int ewrk3_probe(struct net_device *);
extern int el1_probe(struct net_device *); extern int el1_probe(struct net_device *);
...@@ -252,9 +251,6 @@ static struct devprobe isa_probes[] __initdata = { ...@@ -252,9 +251,6 @@ static struct devprobe isa_probes[] __initdata = {
#ifdef CONFIG_EEXPRESS_PRO /* Intel EtherExpress Pro/10 */ #ifdef CONFIG_EEXPRESS_PRO /* Intel EtherExpress Pro/10 */
{eepro_probe, 0}, {eepro_probe, 0},
#endif #endif
#ifdef CONFIG_DEPCA /* DEC DEPCA */
{depca_probe, 0},
#endif
#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */ #ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */
{ewrk3_probe, 0}, {ewrk3_probe, 0},
#endif #endif
......
drivers/net/depca.c
View file @ 16a5517c
...@@ -253,7 +253,8 @@ ...@@ -253,7 +253,8 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/unistd.h> #include <linux/unistd.h>
#include <linux/ctype.h> #include <linux/ctype.h>
#include <linux/mca-legacy.h> #include <linux/moduleparam.h>
#include <linux/device.h>
#include <asm/uaccess.h> #include <asm/uaccess.h>
#include <asm/bitops.h> #include <asm/bitops.h>
...@@ -265,7 +266,6 @@ ...@@ -265,7 +266,6 @@
#endif #endif
#ifdef CONFIG_EISA #ifdef CONFIG_EISA
#include <linux/device.h>
#include <linux/eisa.h> #include <linux/eisa.h>
#endif #endif
...@@ -305,21 +305,21 @@ static int depca_debug = 1; ...@@ -305,21 +305,21 @@ static int depca_debug = 1;
** EISA bus defines ** EISA bus defines
*/ */
#define DEPCA_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ #define DEPCA_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */
#define MAX_EISA_SLOTS 16
#define EISA_SLOT_INC 0x1000
/* /*
** ISA Bus defines ** ISA Bus defines
*/ */
#define DEPCA_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0xe0000,0x00000} #define DEPCA_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0xe0000,0x00000}
#define DEPCA_IO_PORTS {0x300, 0x200, 0}
#define DEPCA_TOTAL_SIZE 0x10 #define DEPCA_TOTAL_SIZE 0x10
static short mem_chkd;
/* static struct {
** Adapter ID for the MCA EtherWORKS DE210/212 adapter u_long iobase;
*/ struct platform_device *device;
#define DE212_ID 0x6def } depca_io_ports[] = {
{ 0x300, NULL },
{ 0x200, NULL },
{ 0 , NULL },
};
/* /*
** Name <-> Adapter mapping ** Name <-> Adapter mapping
...@@ -330,34 +330,86 @@ static short mem_chkd; ...@@ -330,34 +330,86 @@ static short mem_chkd;
"DE210","DE212",\ "DE210","DE212",\
"DE422",\ "DE422",\
""} ""}
static enum {
static char* __initdata depca_signature[] = DEPCA_SIGNATURE;
enum depca_type {
DEPCA, de100, de101, de200, de201, de202, de210, de212, de422, unknown DEPCA, de100, de101, de200, de201, de202, de210, de212, de422, unknown
} adapter; };
static char depca_string[] = "depca";
static int depca_device_remove (struct device *device);
#ifdef CONFIG_EISA #ifdef CONFIG_EISA
struct eisa_device_id depca_eisa_ids[] = { struct eisa_device_id depca_eisa_ids[] = {
{ "DEC4220" }, { "DEC4220", de422 },
{ "" } { "" }
}; };
static int depca_eisa_probe (struct device *device); static int depca_eisa_probe (struct device *device);
static int depca_eisa_remove (struct device *device);
struct eisa_driver depca_eisa_driver = { struct eisa_driver depca_eisa_driver = {
.id_table = depca_eisa_ids, .id_table = depca_eisa_ids,
.driver = { .driver = {
.name = "depca", .name = depca_string,
.probe = depca_eisa_probe, .probe = depca_eisa_probe,
.remove = __devexit_p (depca_eisa_remove) .remove = __devexit_p (depca_device_remove)
} }
}; };
#endif #endif
#ifdef CONFIG_MCA
/*
** Adapter ID for the MCA EtherWORKS DE210/212 adapter
*/
#define DE210_ID 0x628d
#define DE212_ID 0x6def
static short depca_mca_adapter_ids[] = {
DE210_ID,
DE212_ID,
0x0000
};
static char *depca_mca_adapter_name[] = {
"DEC EtherWORKS MC Adapter (DE210)",
"DEC EtherWORKS MC Adapter (DE212)",
NULL
};
static enum depca_type depca_mca_adapter_type[] = {
de210,
de212,
0
};
static int depca_mca_probe (struct device *);
static struct mca_driver depca_mca_driver = {
.id_table = depca_mca_adapter_ids,
.driver = {
.name = depca_string,
.bus = &mca_bus_type,
.probe = depca_mca_probe,
.remove = __devexit_p(depca_device_remove),
},
};
#endif
static int depca_isa_probe (struct device *);
static struct device_driver depca_isa_driver = {
.name = depca_string,
.bus = &platform_bus_type,
.probe = depca_isa_probe,
.remove = __devexit_p(depca_device_remove),
};
/* /*
** Miscellaneous info... ** Miscellaneous info...
*/ */
#define DEPCA_STRLEN 16 #define DEPCA_STRLEN 16
#define MAX_NUM_DEPCAS 2
/* /*
** Memory Alignment. Each descriptor is 4 longwords long. To force a ** Memory Alignment. Each descriptor is 4 longwords long. To force a
...@@ -402,10 +454,13 @@ struct depca_init { ...@@ -402,10 +454,13 @@ struct depca_init {
#define DEPCA_PKT_BIN_SZ 128 /* Should be >=100 unless you #define DEPCA_PKT_BIN_SZ 128 /* Should be >=100 unless you
increase DEPCA_PKT_STAT_SZ */ increase DEPCA_PKT_STAT_SZ */
struct depca_private { struct depca_private {
char devname[DEPCA_STRLEN]; /* Device Product String */
char adapter_name[DEPCA_STRLEN]; /* /proc/ioports string */ char adapter_name[DEPCA_STRLEN]; /* /proc/ioports string */
char adapter; /* Adapter type */ enum depca_type adapter; /* Adapter type */
char mca_slot; /* MCA slot, if MCA else -1 */ enum {
DEPCA_BUS_MCA = 1,
DEPCA_BUS_ISA,
DEPCA_BUS_EISA,
} depca_bus; /* type of bus */
struct depca_init init_block; /* Shadow Initialization block */ struct depca_init init_block; /* Shadow Initialization block */
/* CPU address space fields */ /* CPU address space fields */
struct depca_rx_desc *rx_ring; /* Pointer to start of RX descriptor ring */ struct depca_rx_desc *rx_ring; /* Pointer to start of RX descriptor ring */
...@@ -467,45 +522,39 @@ static void set_multicast_list(struct net_device *dev); ...@@ -467,45 +522,39 @@ static void set_multicast_list(struct net_device *dev);
/* /*
** Private functions ** Private functions
*/ */
static int depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_slot);
static void depca_init_ring(struct net_device *dev); static void depca_init_ring(struct net_device *dev);
static int depca_rx(struct net_device *dev); static int depca_rx(struct net_device *dev);
static int depca_tx(struct net_device *dev); static int depca_tx(struct net_device *dev);
static void LoadCSRs(struct net_device *dev); static void LoadCSRs(struct net_device *dev);
static int InitRestartDepca(struct net_device *dev); static int InitRestartDepca(struct net_device *dev);
static void DepcaSignature(char *name, u_long paddr); static int DepcaSignature(char *name, u_long paddr);
static int DevicePresent(u_long ioaddr); static int DevicePresent(u_long ioaddr);
static int get_hw_addr(struct net_device *dev); static int get_hw_addr(struct net_device *dev);
static void SetMulticastFilter(struct net_device *dev); static void SetMulticastFilter(struct net_device *dev);
static void isa_probe(struct net_device *dev, u_long iobase);
#ifdef CONFIG_MCA
static void mca_probe(struct net_device *dev, u_long iobase);
#endif
static struct net_device *alloc_device(struct net_device *dev, u_long iobase);
static int depca_dev_index(char *s);
static struct net_device *insert_device(struct net_device *dev, u_long iobase, int (*init) (struct net_device *));
static int load_packet(struct net_device *dev, struct sk_buff *skb); static int load_packet(struct net_device *dev, struct sk_buff *skb);
static void depca_dbg_open(struct net_device *dev); static void depca_dbg_open(struct net_device *dev);
#ifdef MODULE
static int autoprobed = 1, loading_module = 1;
# else
static u_char de1xx_irq[] __initdata = { 2, 3, 4, 5, 7, 9, 0 }; static u_char de1xx_irq[] __initdata = { 2, 3, 4, 5, 7, 9, 0 };
static u_char de2xx_irq[] __initdata = { 5, 9, 10, 11, 15, 0 }; static u_char de2xx_irq[] __initdata = { 5, 9, 10, 11, 15, 0 };
static u_char de422_irq[] __initdata = { 5, 9, 10, 11, 0 }; static u_char de422_irq[] __initdata = { 5, 9, 10, 11, 0 };
static u_char *depca_irq; static u_char *depca_irq;
static int autoprobed, loading_module;
#endif /* MODULE */
static char name[DEPCA_STRLEN]; static int irq;
static int num_depcas, num_eth; static int io;
static char *adapter_name;
static int mem; /* For loadable module assignment static int mem; /* For loadable module assignment
use insmod mem=0x????? .... */ use insmod mem=0x????? .... */
static char *adapter_name; /* = '\0'; If no PROM when loadable module module_param (irq, int, 0);
use insmod adapter_name=DE??? ... module_param (io, int, 0);
bss initializes this to zero module_param (adapter_name, charp, 0);
*/ module_param (mem, int, 0);
MODULE_PARM_DESC(irq, "DEPCA IRQ number");
MODULE_PARM_DESC(io, "DEPCA I/O base address");
MODULE_PARM_DESC(adapter_name, "DEPCA adapter name");
MODULE_PARM_DESC(mem, "DEPCA shared memory address");
MODULE_LICENSE("GPL");
/* /*
** Miscellaneous defines... ** Miscellaneous defines...
*/ */
...@@ -513,51 +562,29 @@ static char *adapter_name; /* = '\0'; If no PROM when loadable module ...@@ -513,51 +562,29 @@ static char *adapter_name; /* = '\0'; If no PROM when loadable module
outw(CSR0, DEPCA_ADDR);\ outw(CSR0, DEPCA_ADDR);\
outw(STOP, DEPCA_DATA) outw(STOP, DEPCA_DATA)
int __init depca_probe(struct net_device *dev) static int __init depca_hw_init (struct net_device *dev, struct device *device)
{ {
int tmp = num_depcas, status = -ENODEV; struct depca_private *lp;
u_long iobase = dev->base_addr; int i, j, offset, netRAM, mem_len, status = 0;
s16 nicsr;
SET_MODULE_OWNER(dev); u_long ioaddr;
u_long mem_start;
if ((iobase == 0) && loading_module) {
printk("Autoprobing is not supported when loading a module based driver.\n");
status = -EIO;
} else {
#ifdef CONFIG_MCA
mca_probe(dev, iobase);
#endif
isa_probe(dev, iobase);
#ifdef CONFIG_EISA
eisa_driver_register (&depca_eisa_driver);
#endif
if ((tmp == num_depcas) && (iobase != 0) && loading_module) {
printk("%s: depca_probe() cannot find device at 0x%04lx.\n", dev->name, iobase);
}
/* /*
** Walk the device list to check that at least one device * We are now supposed to enter this function with the
** initialised OK * following fields filled with proper values :
*
* dev->base_addr
* lp->mem_start
* lp->depca_bus
* lp->adapter
*
* dev->irq can be set if known from device configuration (on
* MCA or EISA) or module option. Otherwise, it will be auto
* detected.
*/ */
for (; (dev->priv == NULL) && (dev->next != NULL); dev = dev->next);
if (dev->priv) ioaddr = dev->base_addr;
status = 0;
if (iobase == 0)
autoprobed = 1;
}
return status;
}
static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_slot)
{
struct depca_private *lp;
int i, j, offset, netRAM, mem_len, status = 0;
s16 nicsr;
u_long mem_start = 0, mem_base[] = DEPCA_RAM_BASE_ADDRESSES;
int is_eisa = ((ioaddr & 0x0fff) == DEPCA_EISA_IO_PORTS);
STOP_DEPCA; STOP_DEPCA;
...@@ -569,24 +596,34 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s ...@@ -569,24 +596,34 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s
return -ENXIO; return -ENXIO;
} }
do { lp = (struct depca_private *) dev->priv;
strcpy(name, (adapter_name ? adapter_name : "")); mem_start = lp->mem_start;
mem_start = (mem ? mem & 0xf0000 : mem_base[mem_chkd++]);
DepcaSignature(name, mem_start);
} while (!mem && mem_base[mem_chkd] && (adapter == unknown));
if ((adapter == unknown) || !mem_start) { /* DEPCA device not found */ if (!mem_start || lp->adapter < DEPCA || lp->adapter >=unknown)
return -ENXIO; return -ENXIO;
}
dev->base_addr = ioaddr; printk ("%s: %s at 0x%04lx",
device->bus_id, depca_signature[lp->adapter], ioaddr);
switch (lp->depca_bus) {
#ifdef CONFIG_MCA
case DEPCA_BUS_MCA:
printk(" (MCA slot %d)", to_mca_device(device)->slot + 1);
break;
#endif
#ifdef CONFIG_EISA
case DEPCA_BUS_EISA:
printk(" (EISA slot %d)", to_eisa_device(device)->slot);
break;
#endif
if (mca_slot != -1) { case DEPCA_BUS_ISA:
printk("%s: %s at 0x%04lx (MCA slot %d)", dev->name, name, ioaddr, mca_slot); break;
} else if (is_eisa) { /* EISA slot address */
printk("%s: %s at 0x%04lx (EISA slot %d)", dev->name, name, ioaddr, (int) ((ioaddr >> 12) & 0x0f)); default:
} else { /* ISA port address */ printk("Unknown DEPCA bus %d\n", lp->depca_bus);
printk("%s: %s at 0x%04lx", dev->name, name, ioaddr); return -ENXIO;
} }
printk(", h/w address "); printk(", h/w address ");
...@@ -601,18 +638,20 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s ...@@ -601,18 +638,20 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s
printk("%2.2x", dev->dev_addr[i]); printk("%2.2x", dev->dev_addr[i]);
/* Set up the maximum amount of network RAM(kB) */ /* Set up the maximum amount of network RAM(kB) */
netRAM = ((adapter != DEPCA) ? 64 : 48); netRAM = ((lp->adapter != DEPCA) ? 64 : 48);
if ((nicsr & _128KB) && (adapter == de422)) if ((nicsr & _128KB) && (lp->adapter == de422))
netRAM = 128; netRAM = 128;
offset = 0x0000;
/* Shared Memory Base Address */ /* Shared Memory Base Address */
if (nicsr & BUF) { if (nicsr & BUF) {
offset = 0x8000; /* 32kbyte RAM offset */
nicsr &= ~BS; /* DEPCA RAM in top 32k */ nicsr &= ~BS; /* DEPCA RAM in top 32k */
netRAM -= 32; netRAM -= 32;
/* Only EISA/ISA needs start address to be re-computed */
if (lp->depca_bus != DEPCA_BUS_MCA)
mem_start += 0x8000;
} }
mem_start += offset; /* (E)ISA start address */
if ((mem_len = (NUM_RX_DESC * (sizeof(struct depca_rx_desc) + RX_BUFF_SZ) + NUM_TX_DESC * (sizeof(struct depca_tx_desc) + TX_BUFF_SZ) + sizeof(struct depca_init))) if ((mem_len = (NUM_RX_DESC * (sizeof(struct depca_rx_desc) + RX_BUFF_SZ) + NUM_TX_DESC * (sizeof(struct depca_tx_desc) + TX_BUFF_SZ) + sizeof(struct depca_init)))
> (netRAM << 10)) { > (netRAM << 10)) {
printk(",\n requests %dkB RAM: only %dkB is available!\n", (mem_len >> 10), netRAM); printk(",\n requests %dkB RAM: only %dkB is available!\n", (mem_len >> 10), netRAM);
...@@ -622,23 +661,14 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s ...@@ -622,23 +661,14 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s
printk(",\n has %dkB RAM at 0x%.5lx", netRAM, mem_start); printk(",\n has %dkB RAM at 0x%.5lx", netRAM, mem_start);
/* Enable the shadow RAM. */ /* Enable the shadow RAM. */
if (adapter != DEPCA) { if (lp->adapter != DEPCA) {
nicsr |= SHE; nicsr |= SHE;
outb(nicsr, DEPCA_NICSR); outb(nicsr, DEPCA_NICSR);
} }
/* Define the device private memory */
if (!is_eisa) {
dev->priv = (void *) kmalloc(sizeof(struct depca_private), GFP_KERNEL);
if (dev->priv == NULL)
return -ENOMEM;
}
lp = (struct depca_private *) dev->priv;
memset((char *) dev->priv, 0, sizeof(struct depca_private));
lp->adapter = adapter;
lp->mca_slot = mca_slot;
lp->lock = SPIN_LOCK_UNLOCKED; lp->lock = SPIN_LOCK_UNLOCKED;
sprintf(lp->adapter_name, "%s (%s)", name, dev->name); sprintf(lp->adapter_name, "%s (%s)",
depca_signature[lp->adapter], device->bus_id);
status = -EBUSY; status = -EBUSY;
/* Initialisation Block */ /* Initialisation Block */
...@@ -702,7 +732,6 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s ...@@ -702,7 +732,6 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s
/* To auto-IRQ we enable the initialization-done and DMA err, /* To auto-IRQ we enable the initialization-done and DMA err,
interrupts. For now we will always get a DMA error. */ interrupts. For now we will always get a DMA error. */
if (dev->irq < 2) { if (dev->irq < 2) {
#ifndef MODULE
unsigned char irqnum; unsigned char irqnum;
unsigned long irq_mask, delay; unsigned long irq_mask, delay;
...@@ -725,6 +754,9 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s ...@@ -725,6 +754,9 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s
case de422: case de422:
depca_irq = de422_irq; depca_irq = de422_irq;
break; break;
default:
break; /* Not reached */
} }
/* Trigger an initialization just for the interrupt. */ /* Trigger an initialization just for the interrupt. */
...@@ -733,6 +765,7 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s ...@@ -733,6 +765,7 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s
delay = jiffies + HZ/50; delay = jiffies + HZ/50;
while (time_before(jiffies, delay)) while (time_before(jiffies, delay))
yield(); yield();
irqnum = probe_irq_off(irq_mask); irqnum = probe_irq_off(irq_mask);
status = -ENXIO; status = -ENXIO;
...@@ -746,13 +779,11 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s ...@@ -746,13 +779,11 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s
printk(" and uses IRQ%d.\n", dev->irq); printk(" and uses IRQ%d.\n", dev->irq);
} }
status = -ENXIO;
if (!dev->irq) { if (!dev->irq) {
printk(" but incorrect IRQ line detected.\n"); printk(" but incorrect IRQ line detected.\n");
goto out_priv; return -ENXIO;
} }
} }
#endif /* MODULE */
} else { } else {
printk(" and assigned IRQ%d.\n", dev->irq); printk(" and assigned IRQ%d.\n", dev->irq);
} }
...@@ -773,17 +804,14 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s ...@@ -773,17 +804,14 @@ static int __init depca_hw_init(struct net_device *dev, u_long ioaddr, int mca_s
dev->mem_start = 0; dev->mem_start = 0;
/* Fill in the generic field of the device structure. */ device->driver_data = dev;
if (!is_eisa) SET_NETDEV_DEV (dev, device);
ether_setup(dev);
register_netdev (dev);
return 0; return 0;
out_priv: out_priv:
if (!is_eisa) {
kfree(dev->priv);
dev->priv = NULL;
} else {
unregister_netdev (dev);
}
return status; return status;
} }
...@@ -1284,33 +1312,55 @@ static void SetMulticastFilter(struct net_device *dev) ...@@ -1284,33 +1312,55 @@ static void SetMulticastFilter(struct net_device *dev)
return; return;
} }
static int __init depca_common_init (u_long ioaddr, struct net_device **devp)
{
int status = 0;
if (!request_region (ioaddr, DEPCA_TOTAL_SIZE, depca_string)) {
status = -EBUSY;
goto out;
}
if (DevicePresent(ioaddr)) {
status = -ENODEV;
goto out_release;
}
if (!(*devp = alloc_etherdev (sizeof (struct depca_private)))) {
status = -ENOMEM;
goto out_release;
}
return 0;
out_release:
release_region (ioaddr, DEPCA_TOTAL_SIZE);
out:
return status;
}
#ifdef CONFIG_MCA #ifdef CONFIG_MCA
/* /*
** Microchannel bus I/O device probe ** Microchannel bus I/O device probe
*/ */
static void __init mca_probe(struct net_device *dev, u_long ioaddr) static int __init depca_mca_probe(struct device *device)
{ {
unsigned char pos[2]; unsigned char pos[2];
unsigned char where; unsigned char where;
unsigned long iobase; unsigned long iobase, mem_start;
int irq; int irq, err;
int slot = 0; struct mca_device *mdev = to_mca_device (device);
struct net_device *dev;
/* struct depca_private *lp;
** See if we've been here before.
*/
if ((!ioaddr && autoprobed) || (ioaddr && !loading_module))
return;
if (MCA_bus) {
/* /*
** Search for the adapter. If an address has been given, search ** Search for the adapter. If an address has been given, search
** specifically for the card at that address. Otherwise find the ** specifically for the card at that address. Otherwise find the
** first card in the system. ** first card in the system.
*/ */
while ((dev != NULL) && ((slot = mca_find_adapter(DE212_ID, slot)) != MCA_NOTFOUND)) {
pos[0] = mca_read_stored_pos(slot, 2); pos[0] = mca_device_read_stored_pos(mdev, 2);
pos[1] = mca_read_stored_pos(slot, 3); pos[1] = mca_device_read_stored_pos(mdev, 3);
/* /*
** IO of card is handled by bits 1 and 2 of pos0. ** IO of card is handled by bits 1 and 2 of pos0.
...@@ -1324,15 +1374,6 @@ static void __init mca_probe(struct net_device *dev, u_long ioaddr) ...@@ -1324,15 +1374,6 @@ static void __init mca_probe(struct net_device *dev, u_long ioaddr)
where = (pos[0] & 6) >> 1; where = (pos[0] & 6) >> 1;
iobase = 0x2c00 + (0x10 * where); iobase = 0x2c00 + (0x10 * where);
if ((ioaddr) && (ioaddr != iobase)) {
/*
** Card was found, but not at the right IO location. Continue
** scanning from the next MCA slot up for another card.
*/
slot++;
continue;
}
/* /*
** Found the adapter we were looking for. Now start setting it up. ** Found the adapter we were looking for. Now start setting it up.
** **
...@@ -1346,7 +1387,7 @@ static void __init mca_probe(struct net_device *dev, u_long ioaddr) ...@@ -1346,7 +1387,7 @@ static void __init mca_probe(struct net_device *dev, u_long ioaddr)
** 0 0 0 1 9 ** 0 0 0 1 9
** 0 1 0 0 10 ** 0 1 0 0 10
** 1 0 0 0 11 ** 1 0 0 0 11
* */ */
where = pos[1] & 0x0f; where = pos[1] & 0x0f;
switch (where) { switch (where) {
case 1: case 1:
...@@ -1363,7 +1404,7 @@ static void __init mca_probe(struct net_device *dev, u_long ioaddr) ...@@ -1363,7 +1404,7 @@ static void __init mca_probe(struct net_device *dev, u_long ioaddr)
break; break;
default: default:
printk("%s: mca_probe IRQ error. You should never get here (%d).\n", dev->name, where); printk("%s: mca_probe IRQ error. You should never get here (%d).\n", dev->name, where);
return; return -EINVAL;
} }
/* /*
...@@ -1380,119 +1421,156 @@ static void __init mca_probe(struct net_device *dev, u_long ioaddr) ...@@ -1380,119 +1421,156 @@ static void __init mca_probe(struct net_device *dev, u_long ioaddr)
** 1 1 0 E8000-EFFFF (32K) ** 1 1 0 E8000-EFFFF (32K)
*/ */
where = (pos[0] & 0x18) >> 3; where = (pos[0] & 0x18) >> 3;
mem = 0xc0000 + (where * 0x10000); mem_start = 0xc0000 + (where * 0x10000);
if (pos[0] & 0x20) { if (pos[0] & 0x20) {
mem += 0x8000; mem_start += 0x8000;
} }
/* claim the slot */
strncpy(mdev->name, depca_mca_adapter_name[mdev->index],
sizeof(mdev->name));
mca_device_set_claim(mdev, 1);
/* /*
** Get everything allocated and initialized... (almost just ** Get everything allocated and initialized... (almost just
** like the ISA and EISA probes) ** like the ISA and EISA probes)
*/ */
if (!request_region (iobase, DEPCA_TOTAL_SIZE, "depca")) { irq = mca_device_transform_irq(mdev, irq);
if (autoprobed) iobase = mca_device_transform_ioport(mdev, iobase);
printk(KERN_WARNING "%s: region already allocated at 0x%04lx.\n", dev->name, iobase);
goto next;
}
if (DevicePresent(iobase) != 0) {
/*
** If the MCA configuration says the card should be here,
** it really should be here.
*/
printk(KERN_ERR "%s: MCA reports card at 0x%lx but it is not responding.\n", dev->name, iobase);
goto release_next;
}
if (!(dev = alloc_device(dev, iobase))) if ((err = depca_common_init (iobase, &dev)))
goto release_next; goto out_unclaim;
num_eth++;
dev->irq = irq; dev->irq = irq;
if (depca_hw_init(dev, iobase, slot)) dev->base_addr = iobase;
goto release_next; lp = dev->priv;
lp->depca_bus = DEPCA_BUS_MCA;
/* lp->adapter = depca_mca_adapter_type[mdev->index];
** Adapter initialized correctly: Name it in lp->mem_start = mem_start;
** /proc/mca.
*/
mca_set_adapter_name(slot, "DE210/212 Ethernet Adapter");
mca_mark_as_used(slot);
num_depcas++;
/* if ((err = depca_hw_init(dev, device)))
** If this is a probe by a module, return after setting up the goto out_free;
** given card.
*/
if (ioaddr)
return;
/* return 0;
** Set up to check the next slot and loop.
*/
slot++;
continue;
release_next: out_free:
free_netdev (dev);
release_region (iobase, DEPCA_TOTAL_SIZE); release_region (iobase, DEPCA_TOTAL_SIZE);
next: out_unclaim:
slot++; mca_device_set_claim(mdev, 0);
}
}
return; return err;;
} }
#endif #endif
/* /*
** ISA bus I/O device probe ** ISA bus I/O device probe
*/ */
static void __init isa_probe(struct net_device *dev, u_long ioaddr)
static void depca_platform_release (struct device *device)
{
struct platform_device *pldev;
/* free device */
pldev = to_platform_device (device);
kfree (pldev);
}
static void __init depca_platform_probe (void)
{ {
int i = num_depcas, maxSlots; int i;
s32 ports[] = DEPCA_IO_PORTS; struct platform_device *pldev;
if (!ioaddr && autoprobed) for (i = 0; depca_io_ports[i].iobase; i++) {
return; /* Been here before ! */ depca_io_ports[i].device = NULL;
if (ioaddr > 0x400)
return; /* EISA Address */ /* if an address has been specified on the command
if (i >= MAX_NUM_DEPCAS) * line, use it (if valid) */
return; /* Too many ISA adapters */ if (io && io != depca_io_ports[i].iobase)
if (ioaddr == 0) { /* Autoprobing */
maxSlots = MAX_NUM_DEPCAS;
} else { /* Probe a specific location */
ports[i] = ioaddr;
maxSlots = i + 1;
}
for (; (i < maxSlots) && (dev != NULL) && ports[i]; i++) {
if (!request_region (ports[i], DEPCA_TOTAL_SIZE, "depca")) {
if (autoprobed)
printk("%s: region already allocated at 0x%04x.\n", dev->name, ports[i]);
continue; continue;
}
if (DevicePresent(ports[i])) { if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL)))
release_region (ports[i], DEPCA_TOTAL_SIZE);
continue; continue;
}
if (!(dev = alloc_device(dev, ports[i]))) { memset (pldev, 0, sizeof (*pldev));
release_region (ports[i], DEPCA_TOTAL_SIZE); pldev->name = depca_string;
pldev->id = i;
pldev->dev.platform_data = (void *) depca_io_ports[i].iobase;
pldev->dev.release = depca_platform_release;
depca_io_ports[i].device = pldev;
if (platform_device_register (pldev)) {
kfree (pldev);
depca_io_ports[i].device = NULL;
continue; continue;
} }
num_eth++; if (!pldev->dev.driver) {
/* The driver was not bound to this device, there was
* no hardware at this address. Unregister it, as the
* release fuction will take care of freeing the
* allocated structure */
if (depca_hw_init(dev, ports[i], -1)) { depca_io_ports[i].device = NULL;
release_region (ports[i], DEPCA_TOTAL_SIZE); platform_device_unregister (pldev);
continue;
} }
}
}
static enum depca_type __init depca_shmem_probe (ulong *mem_start)
{
u_long mem_base[] = DEPCA_RAM_BASE_ADDRESSES;
enum depca_type adapter = unknown;
int i;
num_depcas++; for (i = 0; mem_base[i]; i++) {
*mem_start = mem ? mem : mem_base[i];
adapter = DepcaSignature (adapter_name, *mem_start);
if (adapter != unknown)
break;
} }
return; return adapter;
}
static int __init depca_isa_probe (struct device *device)
{
struct net_device *dev;
struct depca_private *lp;
u_long ioaddr, mem_start = 0;
enum depca_type adapter = unknown;
int status = 0;
ioaddr = (u_long) device->platform_data;
if ((status = depca_common_init (ioaddr, &dev)))
goto out;
adapter = depca_shmem_probe (&mem_start);
if (adapter == unknown) {
status = -ENODEV;
goto out_free;
}
dev->base_addr = ioaddr;
dev->irq = irq; /* Use whatever value the user gave
* us, and 0 if he didn't. */
lp = dev->priv;
lp->depca_bus = DEPCA_BUS_ISA;
lp->adapter = adapter;
lp->mem_start = mem_start;
if ((status = depca_hw_init(dev, device)))
goto out_free;
return 0;
out_free:
free_netdev (dev);
release_region (ioaddr, DEPCA_TOTAL_SIZE);
out:
return status;
} }
/* /*
...@@ -1504,202 +1582,120 @@ static int __init depca_eisa_probe (struct device *device) ...@@ -1504,202 +1582,120 @@ static int __init depca_eisa_probe (struct device *device)
{ {
struct eisa_device *edev; struct eisa_device *edev;
struct net_device *dev; struct net_device *dev;
u_long iobase; struct depca_private *lp;
u_long ioaddr, mem_start;
int status = 0; int status = 0;
edev = to_eisa_device (device); edev = to_eisa_device (device);
iobase = edev->base_addr + DEPCA_EISA_IO_PORTS; ioaddr = edev->base_addr + DEPCA_EISA_IO_PORTS;
if (!request_region (iobase, DEPCA_TOTAL_SIZE, "depca")) { if ((status = depca_common_init (ioaddr, &dev)))
status = -EBUSY;
goto out; goto out;
}
if (DevicePresent(iobase)) { /* It would have been nice to get card configuration from the
status = -ENODEV; * card. Unfortunately, this register is write-only (shares
goto out_release; * it's address with the ethernet prom)... As we don't parse
} * the EISA configuration structures (yet... :-), just rely on
* the ISA probing to sort it out... */
if (!(dev = init_etherdev (NULL, sizeof (struct depca_private)))) { depca_shmem_probe (&mem_start);
status = -ENOMEM;
goto out_release;
}
eisa_set_drvdata (edev, dev); dev->base_addr = ioaddr;
dev->irq = irq;
lp = dev->priv;
lp->depca_bus = DEPCA_BUS_EISA;
lp->adapter = edev->id.driver_data;
lp->mem_start = mem_start;
if ((status = depca_hw_init(dev, iobase, -1))) if ((status = depca_hw_init(dev, device)))
goto out_free; goto out_free;
num_depcas++;
return 0; return 0;
out_free: out_free:
kfree (dev); free_netdev (dev);
out_release: release_region (ioaddr, DEPCA_TOTAL_SIZE);
release_region (iobase, DEPCA_TOTAL_SIZE);
out: out:
return status; return status;
} }
#endif
static int __devexit depca_eisa_remove (struct device *device) static int __devexit depca_device_remove (struct device *device)
{ {
struct net_device *dev; struct net_device *dev;
struct eisa_device *edev;
struct depca_private *lp; struct depca_private *lp;
int bus;
edev = to_eisa_device (device); dev = device->driver_data;
dev = eisa_get_drvdata (edev);
lp = dev->priv; lp = dev->priv;
unregister_netdev (dev); unregister_netdev (dev);
iounmap (lp->sh_mem); iounmap (lp->sh_mem);
release_mem_region (lp->mem_start, lp->mem_len); release_mem_region (lp->mem_start, lp->mem_len);
release_region (dev->base_addr, DEPCA_TOTAL_SIZE); release_region (dev->base_addr, DEPCA_TOTAL_SIZE);
kfree (dev); bus = lp->depca_bus;
free_netdev (dev);
return 0; return 0;
} }
#endif
/*
** Search the entire 'eth' device list for a fixed probe. If a match isn't
** found then check for an autoprobe or unused device location. If they
** are not available then insert a new device structure at the end of
** the current list.
*/
static struct net_device *__init alloc_device(struct net_device *dev, u_long iobase)
{
struct net_device *adev = NULL;
int fixed = 0, new_dev = 0;
num_eth = depca_dev_index(dev->name);
if (loading_module)
return dev;
while (1) {
if (((dev->base_addr == DEPCA_NDA) || (dev->base_addr == 0)) && !adev) {
adev = dev;
} else if ((dev->priv == NULL) && (dev->base_addr == iobase)) {
fixed = 1;
} else {
if (dev->next == NULL) {
new_dev = 1;
} else if (strncmp(dev->next->name, "eth", 3) != 0) {
new_dev = 1;
}
}
if ((dev->next == NULL) || new_dev || fixed)
break;
dev = dev->next;
num_eth++;
}
if (adev && !fixed) {
dev = adev;
num_eth = depca_dev_index(dev->name);
new_dev = 0;
}
if (((dev->next == NULL) && ((dev->base_addr != DEPCA_NDA) && (dev->base_addr != 0)) && !fixed) || new_dev) {
num_eth++; /* New device */
dev = insert_device(dev, iobase, depca_probe);
}
return dev;
}
/*
** If at end of eth device list and can't use current entry, malloc
** one up. If memory could not be allocated, print an error message.
*/
static struct net_device *__init insert_device(struct net_device *dev, u_long iobase, int (*init) (struct net_device *))
{
struct net_device *new;
new = (struct net_device *) kmalloc(sizeof(struct net_device), GFP_KERNEL);
if (new == NULL) {
printk("eth%d: Device not initialised, insufficient memory\n", num_eth);
return NULL;
} else {
new->next = dev->next;
dev->next = new;
dev = dev->next; /* point to the new device */
if (num_eth > 9999) {
sprintf(dev->name, "eth????"); /* New device name */
} else {
sprintf(dev->name, "eth%d", num_eth); /* New device name */
}
dev->base_addr = iobase; /* assign the io address */
dev->init = init; /* initialisation routine */
}
return dev;
}
static int __init depca_dev_index(char *s)
{
int i = 0, j = 0;
for (; *s; s++) {
if (isdigit(*s)) {
j = 1;
i = (i * 10) + (*s - '0');
} else if (j)
break;
}
return i;
}
/* /*
** Look for a particular board name in the on-board Remote Diagnostics ** Look for a particular board name in the on-board Remote Diagnostics
** and Boot (readb) ROM. This will also give us a clue to the network RAM ** and Boot (readb) ROM. This will also give us a clue to the network RAM
** base address. ** base address.
*/ */
static void __init DepcaSignature(char *name, u_long paddr) static int __init DepcaSignature(char *name, u_long base_addr)
{ {
u_int i, j, k; u_int i, j, k;
const char *signatures[] = DEPCA_SIGNATURE;
void *ptr; void *ptr;
char tmpstr[16]; char tmpstr[16];
u_long prom_addr = base_addr + 0xc000;
u_long mem_addr = base_addr + 0x8000; /* 32KB */
/* Can't reserve the prom region, it is already marked as
* used, at least on x86. Instead, reserve a memory region a
* board would certainly use. If it works, go ahead. If not,
* run like hell... */
if (!request_mem_region (mem_addr, 16, depca_string))
return unknown;
/* Copy the first 16 bytes of ROM */ /* Copy the first 16 bytes of ROM */
ptr = ioremap(paddr + 0xc000, 16);
ptr = ioremap(prom_addr, 16);
if (ptr == NULL) { if (ptr == NULL) {
printk(KERN_ERR "depca: I/O remap failed at %lx\n", paddr + 0xc000); printk(KERN_ERR "depca: I/O remap failed at %lx\n", prom_addr);
adapter = unknown; return unknown;
return;
} }
for (i = 0; i < 16; i++) { for (i = 0; i < 16; i++) {
tmpstr[i] = readb(ptr + i); tmpstr[i] = readb(ptr + i);
} }
iounmap(ptr); iounmap(ptr);
release_mem_region (mem_addr, 16);
/* Check if PROM contains a valid string */ /* Check if PROM contains a valid string */
for (i = 0; *signatures[i] != '\0'; i++) { for (i = 0; *depca_signature[i] != '\0'; i++) {
for (j = 0, k = 0; j < 16 && k < strlen(signatures[i]); j++) { for (j = 0, k = 0; j < 16 && k < strlen(depca_signature[i]); j++) {
if (signatures[i][k] == tmpstr[j]) { /* track signature */ if (depca_signature[i][k] == tmpstr[j]) { /* track signature */
k++; k++;
} else { /* lost signature; begin search again */ } else { /* lost signature; begin search again */
k = 0; k = 0;
} }
} }
if (k == strlen(signatures[i])) if (k == strlen(depca_signature[i]))
break; break;
} }
/* Check if name string is valid, provided there's no PROM */ /* Check if name string is valid, provided there's no PROM */
if (*name && (i == unknown)) { if (name && *name && (i == unknown)) {
for (i = 0; *signatures[i] != '\0'; i++) { for (i = 0; *depca_signature[i] != '\0'; i++) {
if (strcmp(name, signatures[i]) == 0) if (strcmp(name, depca_signature[i]) == 0)
break; break;
} }
} }
/* Update search results */ return i;
strcpy(name, signatures[i]);
adapter = i;
return;
} }
/* /*
...@@ -1773,10 +1769,11 @@ static int __init DevicePresent(u_long ioaddr) ...@@ -1773,10 +1769,11 @@ static int __init DevicePresent(u_long ioaddr)
static int __init get_hw_addr(struct net_device *dev) static int __init get_hw_addr(struct net_device *dev)
{ {
u_long ioaddr = dev->base_addr; u_long ioaddr = dev->base_addr;
struct depca_private *lp = dev->priv;
int i, k, tmp, status = 0; int i, k, tmp, status = 0;
u_short j, x, chksum; u_short j, x, chksum;
x = (((adapter == de100) || (adapter == de101)) ? 1 : 0); x = (((lp->adapter == de100) || (lp->adapter == de101)) ? 1 : 0);
for (i = 0, k = 0, j = 0; j < 3; j++) { for (i = 0, k = 0, j = 0; j < 3; j++) {
k <<= 1; k <<= 1;
...@@ -2083,55 +2080,40 @@ static int depca_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ...@@ -2083,55 +2080,40 @@ static int depca_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
return status; return status;
} }
#ifdef MODULE static int __init depca_module_init (void)
static struct net_device thisDepca;
static int irq = 7; /* EDIT THESE LINE FOR YOUR CONFIGURATION */
static int io = 0x200; /* Or use the irq= io= options to insmod */
MODULE_PARM(irq, "i");
MODULE_PARM(io, "i");
MODULE_PARM_DESC(irq, "DEPCA IRQ number");
MODULE_PARM_DESC(io, "DEPCA I/O base address");
/* See depca_probe() for autoprobe messages when a module */
int init_module(void)
{ {
thisDepca.irq = irq; int err = 0;
thisDepca.base_addr = io;
thisDepca.init = depca_probe;
if (register_netdev(&thisDepca) != 0) #if CONFIG_MCA
return -EIO; err = mca_register_driver (&depca_mca_driver);
#endif
#ifdef CONFIG_EISA
err |= eisa_driver_register (&depca_eisa_driver);
#endif
err |= driver_register (&depca_isa_driver);
depca_platform_probe ();
return 0; return err;
} }
void cleanup_module(void) static void __exit depca_module_exit (void)
{ {
struct depca_private *lp = thisDepca.priv; int i;
#if CONFIG_MCA
unregister_netdev(&thisDepca); mca_unregister_driver (&depca_mca_driver);
if (lp) {
iounmap(lp->sh_mem);
release_mem_region (lp->mem_start, lp->mem_len);
#ifdef CONFIG_MCA
if (lp->mca_slot != -1)
mca_mark_as_unused(lp->mca_slot);
#endif #endif
kfree(lp); #ifdef CONFIG_EISA
thisDepca.priv = NULL; eisa_driver_unregister (&depca_eisa_driver);
} #endif
thisDepca.irq = 0; driver_unregister (&depca_isa_driver);
release_region(thisDepca.base_addr, DEPCA_TOTAL_SIZE); for (i = 0; depca_io_ports[i].iobase; i++) {
if (depca_io_ports[i].device) {
platform_device_unregister (depca_io_ports[i].device);
depca_io_ports[i].device = NULL;
}
}
} }
#endif /* MODULE */
MODULE_LICENSE("GPL");
/* module_init (depca_module_init);
* Local variables: module_exit (depca_module_exit);
* compile-command: "gcc -D__KERNEL__ -I/linux/include -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2 -O2 -m486 -c depca.c"
*
* compile-command: "gcc -D__KERNEL__ -DMODULE -I/linux/include -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2 -O2 -m486 -c depca.c"
* End:
*/
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7