Merge remote-tracking branches 'asoc/topic/wm8960', 'asoc/topic/wm8988' and...

Merge remote-tracking branches 'asoc/topic/wm8960', 'asoc/topic/wm8988' and 'asoc/topic/xtfpga' into asoc-next

Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt

+Bindings for I2S controller built into xtfpga Xtensa bitstreams.
+
+Required properties:
+- compatible: shall be "cdns,xtfpga-i2s".
+- reg: memory region (address and length) with device registers.
+- interrupts: interrupt for the device.
+- clocks: phandle to the clk used as master clock. I2S bus clock
+  is derived from it.
+
+Examples:
+
+	i2s0: xtfpga-i2s@0d080000 {
+		#sound-dai-cells = <0>;
+		compatible = "cdns,xtfpga-i2s";
+		reg = <0x0d080000 0x40>;
+		interrupts = <2 1>;
+		clocks = <&cdce706 4>;
+	};

MAINTAINERS

@@ -10669,6 +10669,7 @@ M:	Max Filippov <jcmvbkbc@gmail.com>
 L:	linux-xtensa@linux-xtensa.org
 S:	Maintained
 F:	drivers/spi/spi-xtensa-xtfpga.c
+F:	sound/soc/xtensa/xtfpga-i2s.c
 
 YAM DRIVER FOR AX.25
 M:	Jean-Paul Roubelat <jpr@f6fbb.org>

sound/soc/Kconfig

@@ -55,6 +55,7 @@ source "sound/soc/spear/Kconfig"
 source "sound/soc/tegra/Kconfig"
 source "sound/soc/txx9/Kconfig"
 source "sound/soc/ux500/Kconfig"
+source "sound/soc/xtensa/Kconfig"
 
 # Supported codecs
 source "sound/soc/codecs/Kconfig"

sound/soc/Makefile

@@ -36,3 +36,4 @@ obj-$(CONFIG_SND_SOC)	+= spear/
 obj-$(CONFIG_SND_SOC)	+= tegra/
 obj-$(CONFIG_SND_SOC)	+= txx9/
 obj-$(CONFIG_SND_SOC)	+= ux500/
+obj-$(CONFIG_SND_SOC)	+= xtensa/

sound/soc/codecs/wm8960.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
+#include <linux/clk.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <sound/core.h>
@@ -117,6 +118,7 @@ static bool wm8960_volatile(struct device *dev, unsigned int reg)
 }
 
 struct wm8960_priv {
+	struct clk *mclk;
 	struct regmap *regmap;
 	int (*set_bias_level)(struct snd_soc_codec *,
 			      enum snd_soc_bias_level level);
@@ -618,14 +620,38 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
 				      enum snd_soc_bias_level level)
 {
 	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+	int ret;
 
 	switch (level) {
 	case SND_SOC_BIAS_ON:
 		break;
 
 	case SND_SOC_BIAS_PREPARE:
-		/* Set VMID to 2x50k */
-		snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80);
+		switch (codec->dapm.bias_level) {
+		case SND_SOC_BIAS_STANDBY:
+			if (!IS_ERR(wm8960->mclk)) {
+				ret = clk_prepare_enable(wm8960->mclk);
+				if (ret) {
+					dev_err(codec->dev,
+						"Failed to enable MCLK: %d\n",
+						ret);
+					return ret;
+				}
+			}
+
+			/* Set VMID to 2x50k */
+			snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80);
+			break;
+
+		case SND_SOC_BIAS_ON:
+			if (!IS_ERR(wm8960->mclk))
+				clk_disable_unprepare(wm8960->mclk);
+			break;
+
+		default:
+			break;
+		}
+
 		break;
 
 	case SND_SOC_BIAS_STANDBY:
@@ -674,7 +700,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
 					 enum snd_soc_bias_level level)
 {
 	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
-	int reg;
+	int reg, ret;
 
 	switch (level) {
 	case SND_SOC_BIAS_ON:
@@ -715,9 +741,22 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
 					    WM8960_VREF, WM8960_VREF);
 
 			msleep(100);
+
+			if (!IS_ERR(wm8960->mclk)) {
+				ret = clk_prepare_enable(wm8960->mclk);
+				if (ret) {
+					dev_err(codec->dev,
+						"Failed to enable MCLK: %d\n",
+						ret);
+					return ret;
+				}
+			}
 			break;
 
 		case SND_SOC_BIAS_ON:
+			if (!IS_ERR(wm8960->mclk))
+				clk_disable_unprepare(wm8960->mclk);
+
 			/* Enable anti-pop mode */
 			snd_soc_update_bits(codec, WM8960_APOP1,
 					    WM8960_POBCTRL | WM8960_SOFT_ST |
@@ -1002,6 +1041,12 @@ static int wm8960_i2c_probe(struct i2c_client *i2c,
 	if (wm8960 == NULL)
 		return -ENOMEM;
 
+	wm8960->mclk = devm_clk_get(&i2c->dev, "mclk");
+	if (IS_ERR(wm8960->mclk)) {
+		if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+	}
+
 	wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap);
 	if (IS_ERR(wm8960->regmap))
 		return PTR_ERR(wm8960->regmap);

sound/soc/codecs/wm8988.c

@@ -813,7 +813,7 @@ static int wm8988_probe(struct snd_soc_codec *codec)
 	return 0;
 }
 
-static struct snd_soc_codec_driver soc_codec_dev_wm8988 = {
+static const struct snd_soc_codec_driver soc_codec_dev_wm8988 = {
 	.probe =	wm8988_probe,
 	.set_bias_level = wm8988_set_bias_level,
 	.suspend_bias_off = true,
@@ -826,7 +826,7 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8988 = {
 	.num_dapm_routes = ARRAY_SIZE(wm8988_dapm_routes),
 };
 
-static struct regmap_config wm8988_regmap = {
+static const struct regmap_config wm8988_regmap = {
 	.reg_bits = 7,
 	.val_bits = 9,
 

sound/soc/xtensa/Kconfig

+config SND_SOC_XTFPGA_I2S
+	tristate "XTFPGA I2S master"
+	select REGMAP_MMIO
+	help
+	  Say Y or M if you want to add support for codecs attached to the
+	  I2S interface on XTFPGA daughter board. You will also need to select
+	  the drivers for the rest of XTFPGA audio subsystem.

sound/soc/xtensa/Makefile

+snd-soc-xtfpga-i2s-objs := xtfpga-i2s.o
+
+obj-$(CONFIG_SND_SOC_XTFPGA_I2S) += snd-soc-xtfpga-i2s.o