Skip to content

L
linux
Commit 16eaaee4 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'renesas-boards3-for-v3.10' of... 

Merge tag 'renesas-boards3-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards2

Third round of  Renesas ARM SoC board updates for v3.10

Highlights:

* Add Lager board support
* Add ape6evm board support
* Add Bock-W board support
* Mackerel MMCIF/SDHI clean ups
* Add ethernet support to kzm9g-reference

This pull request is based on a merge of:

git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-pinmux2-for-v3.10
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-boards2-for-v3.10

The merge with renesas-pinmux2-for-v3.10 was made to provide
run-time dependencies for the following changes:

ARM: shmobile: APE6EVM LAN9220 support
ARM: shmobile: APE6EVM PFC support

* tag 'renesas-boards3-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (307 commits)
  ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection
  ARM: shmobile: mackerel: add interrupt names for SDHI0
  ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio
  ARM: shmobile: mackerel: remove OCR masks, where regulators are used
  ARM: shmobile: mackerel: SDHI resources do not have to be numbered
  ARM: shmobile: Initial r8a7790 Lager board support
  ARM: shmobile: APE6EVM LAN9220 support
  ARM: shmobile: APE6EVM PFC support
  ARM: shmobile: APE6EVM base support
  ARM: shmobile: kzm9g-reference: add ethernet support
  ARM: shmobile: add R-Car M1A Bock-W platform support
  sh-pfc: r8a73a4: Remove unused GPIO bias data
  ARM: shmobile: r8a73a4: Remove all GPIO enums
  sh-pfc: r8a73a4: Remove function GPIOs
  ARM: shmobile: r8a73a4: Remove IRQC function GPIOs
  ARM: shmobile: r8a73a4: Remove SCIF function GPIOs
  sh-pfc: r8a73a4: Remove IRQC function GPIOS
  sh-pfc: r8a73a4: Remove SCIF function GPIOS
  sh-pfc: r8a73a4: Add IRQC pin groups and functions
  sh-pfc: r8a73a4: Add SCIF pin groups and functions
  ...
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 8bb96604 00ae962f
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 16949 additions and 7576 deletions
Documentation/devicetree/bindings/gpio/gpio.txt
View file @ 16eaaee4
......@@ -98,7 +98,7 @@ announce the pinrange to the pin ctrl subsystem. For example,
compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
reg = <0x1460 0x18>;
gpio-controller;
gpio-ranges = <&pinctrl1 20 10>, <&pinctrl2 50 20>;
gpio-ranges = <&pinctrl1 0 20 10>, <&pinctrl2 10 50 20>;
}
......@@ -107,8 +107,8 @@ where,
Next values specify the base pin and number of pins for the range
handled by 'qe_pio_e' gpio. In the given example from base pin 20 to
pin 29 under pinctrl1 and pin 50 to pin 69 under pinctrl2 is handled
by this gpio controller.
pin 29 under pinctrl1 with gpio offset 0 and pin 50 to pin 69 under
pinctrl2 with gpio offset 10 is handled by this gpio controller.
The pinctrl node must have "#gpio-range-cells" property to show number of
arguments to pass with phandle from gpio controllers node.
Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
View file @ 16eaaee4
One-register-per-pin type device tree based pinctrl driver
Required properties:
- compatible : "pinctrl-single"
- compatible : "pinctrl-single" or "pinconf-single".
"pinctrl-single" means that pinconf isn't supported.
"pinconf-single" means that generic pinconf is supported.
- reg : offset and length of the register set for the mux registers
......@@ -14,9 +16,61 @@ Optional properties:
- pinctrl-single,function-off : function off mode for disabled state if
available and same for all registers; if not specified, disabling of
pin functions is ignored
- pinctrl-single,bit-per-mux : boolean to indicate that one register controls
more than one pin
- pinctrl-single,drive-strength : array of value that are used to configure
drive strength in the pinmux register. They're value of drive strength
current and drive strength mask.
/* drive strength current, mask */
pinctrl-single,power-source = <0x30 0xf0>;
- pinctrl-single,bias-pullup : array of value that are used to configure the
input bias pullup in the pinmux register.
/* input, enabled pullup bits, disabled pullup bits, mask */
pinctrl-single,bias-pullup = <0 1 0 1>;
- pinctrl-single,bias-pulldown : array of value that are used to configure the
input bias pulldown in the pinmux register.
/* input, enabled pulldown bits, disabled pulldown bits, mask */
pinctrl-single,bias-pulldown = <2 2 0 2>;
* Two bits to control input bias pullup and pulldown: User should use
pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means
pullup, and the other one bit means pulldown.
* Three bits to control input bias enable, pullup and pulldown. User should
use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias
enable bit should be included in pullup or pulldown bits.
* Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as
pinctrl-single,bias-disable. Because pinctrl single driver could implement
it by calling pulldown, pullup disabled.
- pinctrl-single,input-schmitt : array of value that are used to configure
input schmitt in the pinmux register. In some silicons, there're two input
schmitt value (rising-edge & falling-edge) in the pinmux register.
/* input schmitt value, mask */
pinctrl-single,input-schmitt = <0x30 0x70>;
- pinctrl-single,input-schmitt-enable : array of value that are used to
configure input schmitt enable or disable in the pinmux register.
/* input, enable bits, disable bits, mask */
pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>;
- pinctrl-single,gpio-range : list of value that are used to configure a GPIO
range. They're value of subnode phandle, pin base in pinctrl device, pin
number in this range, GPIO function value of this GPIO range.
The number of parameters is depend on #pinctrl-single,gpio-range-cells
property.
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>;
This driver assumes that there is only one register for each pin (unless the
pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
specified in the pinctrl-bindings.txt document in this directory.
......@@ -42,6 +96,20 @@ Where 0xdc is the offset from the pinctrl register base address for the
device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to
be used when applying this change to the register.
Optional sub-node: In case some pins could be configured as GPIO in the pinmux
register, those pins could be defined as a GPIO range. This sub-node is required
by pinctrl-single,gpio-range property.
Required properties in sub-node:
- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in
pinctrl-single,gpio-range property.
range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;
};
Example:
/* SoC common file */
......@@ -76,6 +144,29 @@ control_devconf0: pinmux@48002274 {
pinctrl-single,function-mask = <0x5F>;
};
/* third controller instance for pins in gpio domain */
pmx_gpio: pinmux@d401e000 {
compatible = "pinconf-single";
reg = <0xd401e000 0x0330>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <7>;
/* sparse GPIO range could be supported */
pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
&range 12 1 0 &range 13 29 1
&range 43 1 0 &range 44 49 1
&range 94 1 1 &range 96 2 1>;
range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;
};
};
/* board specific .dts file */
&pmx_core {
......@@ -96,6 +187,15 @@ control_devconf0: pinmux@48002274 {
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x208 0 /* UART0_RXD (IOCFG138) */
0x20c 0 /* UART0_TXD (IOCFG139) */
>;
pinctrl-single,bias-pulldown = <0 2 2>;
pinctrl-single,bias-pullup = <0 1 1>;
};
/* map uart2 pins */
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
......@@ -122,6 +222,11 @@ control_devconf0: pinmux@48002274 {
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
......
arch/arm/Kconfig
View file @ 16eaaee4
......@@ -723,7 +723,7 @@ config ARCH_SHMOBILE
select MULTI_IRQ_HANDLER
select NEED_MACH_MEMORY_H
select NO_IOPORT
select PINCTRL
select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB
select PM_GENERIC_DOMAINS if PM
select SPARSE_IRQ
help
......
arch/arm/boot/dts/Makefile
View file @ 16eaaee4
......@@ -136,7 +136,12 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
ccu9540.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7779-marzen-reference.dtb \
r8a7790-lager.dtb \
sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb \
r8a73a4-ape6evm.dtb \
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
socfpga_vt.dtb
......
arch/arm/boot/dts/r8a73a4-ape6evm.dts 0 → 100644
View file @ 16eaaee4
/*
* Device Tree Source for the APE6EVM board
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "r8a73a4.dtsi"
/ {
model = "APE6EVM";
compatible = "renesas,ape6evm", "renesas,r8a73a4";
chosen {
bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp";
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x40000000>;
};
ape6evm_fixed_3v3: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
lbsc {
#address-cells = <1>;
#size-cells = <1>;
ethernet@8000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <0x08000000 0x1000>;
interrupt-parent = <&irqc1>;
interrupts = <8 0x4>;
phy-mode = "mii";
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
vdd33a-supply = <&ape6evm_fixed_3v3>;
vddvario-supply = <&ape6evm_fixed_3v3>;
};
};
};
arch/arm/boot/dts/r8a73a4.dtsi 0 → 100644
View file @ 16eaaee4
/*
* Device Tree Source for the r8a73a4 SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/ {
compatible = "renesas,r8a73a4";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1500000000>;
};
};
gic: interrupt-controller@f1001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 0xf04>;
gic-cpuif@4 {
compatible = "arm,gic-cpuif";
cpuif-id = <4>;
cpu = <&cpu0>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>,
<0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>,
<0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>,
<0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>,
<0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>,
<0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>,
<0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>,
<0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>;
};
irqc1: interrupt-controller@e61c0200 {
compatible = "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0200 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>,
<0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>,
<0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>,
<0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>,
<0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>,
<0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>,
<0 56 4>, <0 57 4>;
};
thermal@e61f0000 {
compatible = "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
interrupt-parent = <&gic>;
interrupts = <0 69 4>;
};
};
arch/arm/boot/dts/r8a7778-bockw.dts 0 → 100644
View file @ 16eaaee4
/*
* Reference Device Tree Source for the Bock-W board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* based on r8a7779
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "r8a7778.dtsi"
/ {
model = "bockw";
compatible = "renesas,bockw", "renesas,r8a7778";
chosen {
bootargs = "console=ttySC0,115200 ignore_loglevel";
};
memory {
device_type = "memory";
reg = <0x60000000 0x10000000>;
};
};
arch/arm/boot/dts/r8a7778.dtsi 0 → 100644
View file @ 16eaaee4
/*
* Device Tree Source for Renesas r8a7778
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* based on r8a7779
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "renesas,r8a7778";
cpus {
cpu@0 {
compatible = "arm,cortex-a9";
};
};
gic: interrupt-controller@fe438000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0xfe438000 0x1000>,
<0xfe430000 0x100>;
};
};
arch/arm/boot/dts/r8a7779-marzen-reference.dts 0 → 100644
View file @ 16eaaee4
/*
* Reference Device Tree Source for the Marzen board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "r8a7779.dtsi"
/ {
model = "marzen";
compatible = "renesas,marzen-reference", "renesas,r8a7779";
chosen {
bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
};
memory {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
fixedregulator3v3: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
lan0@18000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x18000000 0x100>;
phy-mode = "mii";
interrupt-parent = <&gic>;
interrupts = <0 28 0x4>;
reg-io-width = <4>;
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
};
};
arch/arm/boot/dts/r8a7779.dtsi 0 → 100644
View file @ 16eaaee4
/*
* Device Tree Source for Renesas r8a7779
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "renesas,r8a7779";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
};
};
gic: interrupt-controller@f0001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0xf0001000 0x1000>,
<0xf0000100 0x100>;
};
i2c0: i2c@0xffc70000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xffc70000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 79 0x4>;
};
i2c1: i2c@0xffc71000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xffc71000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 82 0x4>;
};
i2c2: i2c@0xffc72000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xffc72000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 80 0x4>;
};
i2c3: i2c@0xffc73000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xffc73000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 81 0x4>;
};
thermal@ffc48000 {
compatible = "renesas,rcar-thermal";
reg = <0xffc48000 0x38>;
};
sata: sata@fc600000 {
compatible = "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 100 0x4>;
};
};
arch/arm/boot/dts/sh73a0-reference.dtsi → arch/arm/boot/dts/r8a7790-lager.dts
View file @ 16eaaee4
/*
* Device Tree Source for the SH73A0 SoC
* Device Tree Source for the Lager board
*
* Copyright (C) 2012 Renesas Solutions Corp.
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "sh73a0.dtsi"
/dts-v1/;
/include/ "r8a7790.dtsi"
/ {
compatible = "renesas,sh73a0";
model = "Lager";
compatible = "renesas,lager", "renesas,r8a7790";
mmcif: mmcif@0x10010000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 140 0x4
0 141 0x4>;
reg-io-width = <4>;
chosen {
bootargs = "console=ttySC6,115200 ignore_loglevel";
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x80000000>;
};
lbsc {
#address-cells = <1>;
#size-cells = <1>;
};
};
arch/arm/boot/dts/r8a7790.dtsi 0 → 100644
View file @ 16eaaee4
/*
* Device Tree Source for the r8a7790 SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/ {
compatible = "renesas,r8a7790";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1300000000>;
};
};
gic: interrupt-controller@f1001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 0xf04>;
gic-cpuif@4 {
compatible = "arm,gic-cpuif";
cpuif-id = <4>;
cpu = <&cpu0>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>;
};
};
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts 0 → 100644
View file @ 16eaaee4
/*
* Device Tree Source for the KZM-A9-GT board
*
* Copyright (C) 2012 Horms Solutions Ltd.
*
* Based on sh73a0-kzm9g.dts
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "sh73a0.dtsi"
/ {
model = "KZM-A9-GT";
compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
chosen {
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
};
memory {
device_type = "memory";
reg = <0x41000000 0x1e800000>;
};
reg_1p8v: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
lan9220@10000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x10000000 0x100>;
phy-mode = "mii";
interrupt-parent = <&irqpin0>;
interrupts = <3 0>; /* active low */
reg-io-width = <4>;
smsc,irq-push-pull;
smsc,save-mac-address;
vddvario-supply = <&reg_1p8v>;
vdd33a-supply = <&reg_3p3v>;
};
};
&mmcif {
bus-width = <8>;
vmmc-supply = <&reg_1p8v>;
status = "okay";
};
&sdhi0 {
vmmc-supply = <&reg_3p3v>;
bus-width = <4>;
status = "okay";
};
&sdhi2 {
vmmc-supply = <&reg_3p3v>;
bus-width = <4>;
broken-cd;
status = "okay";
};
arch/arm/boot/dts/sh73a0.dtsi
View file @ 16eaaee4
......@@ -38,6 +38,87 @@ gic: interrupt-controller@f0001000 {
<0xf0000100 0x100>;
};
irqpin0: irqpin@e6900000 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900000 4>,
<0xe6900010 4>,
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
interrupt-parent = <&gic>;
interrupts = <0 1 0x4
0 2 0x4
0 3 0x4
0 4 0x4
0 5 0x4
0 6 0x4
0 7 0x4
0 8 0x4>;
};
irqpin1: irqpin@e6900004 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900004 4>,
<0xe6900014 4>,
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
interrupt-parent = <&gic>;
interrupts = <0 9 0x4
0 10 0x4
0 11 0x4
0 12 0x4
0 13 0x4
0 14 0x4
0 15 0x4
0 16 0x4>;
control-parent;
};
irqpin2: irqpin@e6900008 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900008 4>,
<0xe6900018 4>,
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
interrupt-parent = <&gic>;
interrupts = <0 17 0x4
0 18 0x4
0 19 0x4
0 20 0x4
0 21 0x4
0 22 0x4
0 23 0x4
0 24 0x4>;
};
irqpin3: irqpin@e690000c {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe690000c 4>,
<0xe690001c 4>,
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
interrupt-parent = <&gic>;
interrupts = <0 25 0x4
0 26 0x4
0 27 0x4
0 28 0x4
0 29 0x4
0 30 0x4
0 31 0x4
0 32 0x4>;
};
i2c0: i2c@0xe6820000 {
#address-cells = <1>;
#size-cells = <0>;
......@@ -97,4 +178,48 @@ i2c4: i2c@0xe6828000 {
0 189 0x4
0 190 0x4>;
};
mmcif: mmcif@0x10010000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 140 0x4
0 141 0x4>;
reg-io-width = <4>;
status = "disabled";
};
sdhi0: sdhi@0xee100000 {
compatible = "renesas,r8a7740-sdhi";
reg = <0xee100000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 83 4
0 84 4
0 85 4>;
cap-sd-highspeed;
status = "disabled";
};
/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
sdhi1: sdhi@0xee120000 {
compatible = "renesas,r8a7740-sdhi";
reg = <0xee120000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 88 4
0 89 4>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
};
sdhi2: sdhi@0xee140000 {
compatible = "renesas,r8a7740-sdhi";
reg = <0xee140000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 104 4
0 105 4>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
};
};
arch/arm/boot/dts/spear1310.dtsi
View file @ 16eaaee4
......@@ -89,7 +89,7 @@ gmac4: eth@5c700000 {
pinmux: pinmux@e0700000 {
compatible = "st,spear1310-pinmux";
reg = <0xe0700000 0x1000>;
#gpio-range-cells = <2>;
#gpio-range-cells = <3>;
};
apb {
......@@ -212,7 +212,7 @@ gpiopinctrl: gpio@d8400000 {
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinmux 0 246>;
gpio-ranges = <&pinmux 0 0 246>;
status = "disabled";
st-plgpio,ngpio = <246>;
......
arch/arm/boot/dts/spear1340.dtsi
View file @ 16eaaee4
......@@ -63,7 +63,7 @@ i2s-rec@b2000000 {
pinmux: pinmux@e0700000 {
compatible = "st,spear1340-pinmux";
reg = <0xe0700000 0x1000>;
#gpio-range-cells = <2>;
#gpio-range-cells = <3>;
};
pwm: pwm@e0180000 {
......@@ -127,7 +127,7 @@ gpiopinctrl: gpio@e2800000 {
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinmux 0 252>;
gpio-ranges = <&pinmux 0 0 252>;
status = "disabled";
st-plgpio,ngpio = <250>;
......
arch/arm/boot/dts/spear310.dtsi
View file @ 16eaaee4
......@@ -25,7 +25,7 @@ ahb {
pinmux: pinmux@b4000000 {
compatible = "st,spear310-pinmux";
reg = <0xb4000000 0x1000>;
#gpio-range-cells = <2>;
#gpio-range-cells = <3>;
};
fsmc: flash@44000000 {
......@@ -102,7 +102,7 @@ gpiopinctrl: gpio@b4000000 {
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinmux 0 102>;
gpio-ranges = <&pinmux 0 0 102>;
status = "disabled";
st-plgpio,ngpio = <102>;
......
arch/arm/boot/dts/spear320.dtsi
View file @ 16eaaee4
......@@ -24,7 +24,7 @@ ahb {
pinmux: pinmux@b3000000 {
compatible = "st,spear320-pinmux";
reg = <0xb3000000 0x1000>;
#gpio-range-cells = <2>;
#gpio-range-cells = <3>;
};
clcd@90000000 {
......@@ -130,7 +130,7 @@ gpiopinctrl: gpio@b3000000 {
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinmux 0 102>;
gpio-ranges = <&pinmux 0 0 102>;
status = "disabled";
st-plgpio,ngpio = <102>;
......
arch/arm/configs/bockw_defconfig 0 → 100644
View file @ 16eaaee4
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_KERNEL_LZMA=y
CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE=y
CONFIG_ARCH_R8A7778=y
CONFIG_MACH_BOCKW=y
CONFIG_MEMORY_START=0x60000000
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_SHMOBILE_TIMER_HZ=1024
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_458693=y
CONFIG_ARM_ERRATA_460075=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CMDLINE="console=ttySC0,115200 ignore_loglevel"
CONFIG_CMDLINE_FORCE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_KEYS=y
CONFIG_CRYPTO=y
CONFIG_AVERAGE=y
arch/arm/mach-shmobile/Kconfig
View file @ 16eaaee4
......@@ -16,12 +16,30 @@ config ARCH_SH73A0
select CPU_V7
select I2C
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
config ARCH_R8A7778
bool "R-Car M1 (R8A77780)"
select CPU_V7
select SH_CLK_CPG
select ARM_GIC
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
......@@ -31,6 +49,16 @@ config ARCH_R8A7779
select SH_CLK_CPG
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select RENESAS_INTC_IRQPIN
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
config ARCH_EMEV2
bool "Emma Mobile EV2"
......@@ -68,6 +96,11 @@ config MACH_AG5EVM
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
config MACH_APE6EVM
bool "APE6EVM board"
depends on ARCH_R8A73A4
select USE_OF
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
......@@ -96,12 +129,36 @@ config MACH_ARMADILLO800EVA
select SND_SOC_WM8978 if SND_SIMPLE_CARD
select USE_OF
config MACH_BOCKW
bool "BOCK-W platform"
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select USE_OF
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_MARZEN_REFERENCE
bool "MARZEN board - Reference Device Tree Implementation"
depends on ARCH_R8A7779
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
---help---
Use reference implementation of Marzen board support
which makes use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
select USE_OF
config MACH_KZM9D
bool "KZM9D board"
depends on ARCH_EMEV2
......@@ -116,6 +173,20 @@ config MACH_KZM9G
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
config MACH_KZM9G_REFERENCE
bool "KZM-A9-GT board - Reference Device Tree Implementation"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
---help---
Use reference implementation of KZM-A9-GT board support
which makes as greater use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
comment "SH-Mobile System Configuration"
config CPU_HAS_INTEVT
......@@ -128,7 +199,8 @@ config MEMORY_START
hex "Physical memory start address"
default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
MACH_MACKEREL || MACH_BONITO || \
MACH_ARMADILLO800EVA
MACH_ARMADILLO800EVA || MACH_APE6EVM || \
MACH_LAGER
default "0x41000000" if MACH_KOTA2
default "0x00000000"
---help---
......@@ -138,6 +210,8 @@ config MEMORY_START
config MEMORY_SIZE
hex "Physical memory size"
default "0x80000000" if MACH_LAGER
default "0x40000000" if MACH_APE6EVM
default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
MACH_ARMADILLO800EVA
default "0x1e000000" if MACH_KOTA2
......
arch/arm/mach-shmobile/Makefile
View file @ 16eaaee4
......@@ -8,16 +8,18 @@ obj-y := timer.o console.o clock.o
# CPU objects
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
# SMP objects
smp-y := platsmp.o headsmp.o
smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o
smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o
smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o
# IRQ objects
obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
......@@ -35,13 +37,18 @@ obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
# Board objects
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
obj-$(CONFIG_MACH_BONITO) += board-bonito.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
# Framework support
obj-$(CONFIG_SMP) += $(smp-y)
arch/arm/mach-shmobile/board-ag5evm.c
View file @ 16eaaee4
......@@ -23,6 +23,8 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
......@@ -304,9 +306,9 @@ static int lcd_backlight_set_brightness(int brightness)
if (brightness == 0) {
/* Reset the chip */
gpio_set_value(GPIO_PORT235, 0);
gpio_set_value(235, 0);
mdelay(24);
gpio_set_value(GPIO_PORT235, 1);
gpio_set_value(235, 1);
return 0;
}
......@@ -406,7 +408,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.cd_gpio = GPIO_PORT251,
.cd_gpio = 251,
};
static struct resource sdhi0_resources[] = {
......@@ -461,7 +463,7 @@ static struct regulator_init_data cn4_power_init_data = {
static struct fixed_voltage_config cn4_power_info = {
.supply_name = "CN4 SD/MMC Vdd",
.microvolts = 3300000,
.gpio = GPIO_PORT114,
.gpio = 114,
.enable_high = 1,
.init_data = &cn4_power_init_data,
};
......@@ -479,10 +481,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
static int power_gpio = -EINVAL;
if (power_gpio < 0) {
int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
"sdhi1_power");
if (!ret)
power_gpio = GPIO_PORT114;
power_gpio = 114;
}
/*
......@@ -493,7 +495,7 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
* regulator driver. We have to live with the race in case the driver
* gets unloaded and the GPIO freed between these two steps.
*/
gpio_set_value(GPIO_PORT114, state);
gpio_set_value(114, state);
}
static struct sh_mobile_sdhi_info sh_sdhi1_info = {
......@@ -550,6 +552,77 @@ static struct platform_device *ag5evm_devices[] __initdata = {
&sdhi1_device,
};
static unsigned long pin_pullup_conf[] = {
PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
};
static const struct pinctrl_map ag5evm_pinctrl_map[] = {
/* FSIA */
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_mclk_in", "fsia"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_sclk_in", "fsia"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_data_in", "fsia"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
"fsia_data_out", "fsia"),
/* I2C2 & I2C3 */
PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0",
"i2c2_0", "i2c2"),
PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
"i2c3_0", "i2c3"),
/* IrDA */
PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0",
"irda_0", "irda"),
/* KEYSC */
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_in8", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out04", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out5", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out6_0", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out7_0", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out8_0", "keysc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_out9_2", "keysc"),
PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
"keysc_in8", pin_pullup_conf),
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"mmc0_ctrl_0", "mmc0"),
PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"PORT279", pin_pullup_conf),
PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
"mmc0_data8_0", pin_pullup_conf),
/* SCIFA2 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
"scifa2_data_0", "scifa2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
"scifa2_ctrl_0", "scifa2"),
/* SDHI0 (CN15 [SD I/F]) */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
"sdhi0_wp", "sdhi0"),
/* SDHI1 (CN4 [WLAN I/F]) */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
"sdhi1_data4", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
"sdhi1_ctrl", "sdhi1"),
PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
"sdhi1_data4", pin_pullup_conf),
PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
"PORT263", pin_pullup_conf),
};
static void __init ag5evm_init(void)
{
regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
......@@ -558,96 +631,27 @@ static void __init ag5evm_init(void)
ARRAY_SIZE(fixed2v8_power_consumers), 3300000);
regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
pinctrl_register_mappings(ag5evm_pinctrl_map,
ARRAY_SIZE(ag5evm_pinctrl_map));
sh73a0_pinmux_init();
/* enable SCIFA2 */
gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
/* enable KEYSC */
gpio_request(GPIO_FN_KEYIN0_PU, NULL);
gpio_request(GPIO_FN_KEYIN1_PU, NULL);
gpio_request(GPIO_FN_KEYIN2_PU, NULL);
gpio_request(GPIO_FN_KEYIN3_PU, NULL);
gpio_request(GPIO_FN_KEYIN4_PU, NULL);
gpio_request(GPIO_FN_KEYIN5_PU, NULL);
gpio_request(GPIO_FN_KEYIN6_PU, NULL);
gpio_request(GPIO_FN_KEYIN7_PU, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
gpio_request(GPIO_FN_KEYOUT3, NULL);
gpio_request(GPIO_FN_KEYOUT4, NULL);
gpio_request(GPIO_FN_KEYOUT5, NULL);
gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
gpio_request(GPIO_FN_KEYOUT8, NULL);
gpio_request(GPIO_FN_PORT149_KEYOUT9, NULL);
/* enable I2C channel 2 and 3 */
gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL);
gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL);
gpio_request(GPIO_FN_PORT248_I2C_SCL3, NULL);
gpio_request(GPIO_FN_PORT249_I2C_SDA3, NULL);
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* enable SMSC911X */
gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* FSI A */
gpio_request(GPIO_FN_FSIACK, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
/* IrDA */
gpio_request(GPIO_FN_PORT241_IRDA_OUT, NULL);
gpio_request(GPIO_FN_PORT242_IRDA_IN, NULL);
gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* LCD panel */
gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
mdelay(1);
gpio_set_value(GPIO_PORT217, 1);
gpio_set_value(217, 1);
mdelay(100);
/* LCD backlight controller */
gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
lcd_backlight_set_brightness(0);
/* enable SDHI0 on CN15 [SD I/F] */
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
/* enable SDHI1 on CN4 [WLAN I/F] */
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
gpio_request(GPIO_FN_SDHID1_3_PU, NULL);
gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
#ifdef CONFIG_CACHE_L2X0
/* Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
......
arch/arm/mach-shmobile/board-ap4evb.c
View file @ 16eaaee4
......@@ -34,6 +34,7 @@
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/io.h>
#include <linux/pinctrl/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
......@@ -273,11 +274,11 @@ static struct platform_device smc911x_device = {
/*
* The card detect pin of the top SD/MMC slot (CN7) is active low and is
* connected to GPIO A22 of SH7372 (GPIO_PORT41).
* connected to GPIO A22 of SH7372 (GPIO 41).
*/
static int slot_cn7_get_cd(struct platform_device *pdev)
{
return !gpio_get_value(GPIO_PORT41);
return !gpio_get_value(41);
}
/* MERAM */
static struct sh_mobile_meram_info meram_info = {
......@@ -838,22 +839,22 @@ static struct platform_device fsi_hdmi_device = {
static struct gpio_led ap4evb_leds[] = {
{
.name = "led4",
.gpio = GPIO_PORT185,
.gpio = 185,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led2",
.gpio = GPIO_PORT186,
.gpio = 186,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led3",
.gpio = GPIO_PORT187,
.gpio = 187,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led1",
.gpio = GPIO_PORT188,
.gpio = 188,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}
};
......@@ -1026,10 +1027,10 @@ static void __init hdmi_init_pm_clock(void)
/* TouchScreen */
#ifdef CONFIG_AP4EVB_QHD
# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123
# define GPIO_TSC_PORT GPIO_PORT123
# define GPIO_TSC_PORT 123
#else /* WVGA */
# define GPIO_TSC_IRQ GPIO_FN_IRQ7_40
# define GPIO_TSC_PORT GPIO_PORT40
# define GPIO_TSC_PORT 40
#endif
#define IRQ28 evt2irq(0x3380) /* IRQ28A */
......@@ -1084,6 +1085,28 @@ static struct i2c_board_info i2c1_devices[] = {
};
static const struct pinctrl_map ap4evb_pinctrl_map[] = {
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_ctrl_0", "mmc0"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_wp", "sdhi0"),
/* SDHI1 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
"sdhi1_data4", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
"sdhi1_ctrl", "sdhi1"),
};
#define GPIO_PORT9CR IOMEM(0xE6051009)
#define GPIO_PORT10CR IOMEM(0xE605100A)
#define USCCR1 IOMEM(0xE6058144)
......@@ -1110,6 +1133,8 @@ static void __init ap4evb_init(void)
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
pinctrl_register_mappings(ap4evb_pinctrl_map,
ARRAY_SIZE(ap4evb_pinctrl_map));
sh7372_pinmux_init();
/* enable SCIFA0 */
......@@ -1121,40 +1146,10 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_IRQ6_39, NULL);
/* enable Debug switch (S6) */
gpio_request_one(GPIO_PORT32, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(GPIO_PORT33, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(GPIO_PORT34, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(GPIO_PORT35, GPIOF_IN | GPIOF_EXPORT, NULL);
/* SDHI0 */
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
/* SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHID1_3, NULL);
gpio_request(GPIO_FN_SDHID1_2, NULL);
gpio_request(GPIO_FN_SDHID1_1, NULL);
gpio_request(GPIO_FN_SDHID1_0, NULL);
/* MMCIF */
gpio_request(GPIO_FN_MMCD0_0, NULL);
gpio_request(GPIO_FN_MMCD0_1, NULL);
gpio_request(GPIO_FN_MMCD0_2, NULL);
gpio_request(GPIO_FN_MMCD0_3, NULL);
gpio_request(GPIO_FN_MMCD0_4, NULL);
gpio_request(GPIO_FN_MMCD0_5, NULL);
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCCMD0, NULL);
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL);
gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL);
/* USB enable */
gpio_request(GPIO_FN_VBUS0_1, NULL);
......@@ -1172,15 +1167,15 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
gpio_request(9, NULL);
gpio_request(10, NULL);
gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
/* card detect pin for MMC slot (CN7) */
gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL);
gpio_request_one(41, GPIOF_IN, NULL);
/* setup FSI2 port B (HDMI) */
gpio_request(GPIO_FN_FSIBCK, NULL);
......@@ -1268,8 +1263,8 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request_one(GPIO_PORT189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
lcdc_info.clock_source = LCDC_CLK_BUS;
lcdc_info.ch[0].interface_type = RGB18;
......
arch/arm/mach-shmobile/board-ape6evm.c 0 → 100644
View file @ 16eaaee4
/*
* APE6EVM board support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
/* SMSC LAN9220 */
static const struct resource lan9220_res[] = {
DEFINE_RES_MEM(0x08000000, 0x1000),
{
.start = irq_pin(40), /* IRQ40 */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
},
};
static const struct smsc911x_platform_config lan9220_data = {
.flags = SMSC911X_USE_32BIT,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
};
static const struct pinctrl_map ape6evm_pinctrl_map[] = {
/* SCIFA0 console */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
"scifa0_data", "scifa0"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4",
"irqc_irq40", "irqc"),
};
static void __init ape6evm_add_standard_devices(void)
{
r8a73a4_clock_init();
pinctrl_register_mappings(ape6evm_pinctrl_map,
ARRAY_SIZE(ape6evm_pinctrl_map));
r8a73a4_pinmux_init();
r8a73a4_add_standard_devices();
/* LAN9220 ethernet */
gpio_request_one(270, GPIOF_OUT_INIT_HIGH, NULL); /* smsc9220 RESET */
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
platform_device_register_resndata(&platform_bus, "smsc911x", -1,
lan9220_res, ARRAY_SIZE(lan9220_res),
&lan9220_data, sizeof(lan9220_data));
}
static const char *ape6evm_boards_compat_dt[] __initdata = {
"renesas,ape6evm",
NULL,
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
.init_irq = irqchip_init,
.init_time = shmobile_timer_init,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
arch/arm/mach-shmobile/board-bockw.c 0 → 100644
View file @ 16eaaee4
/*
* Bock-W board support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/platform_device.h>
#include <mach/common.h>
#include <mach/r8a7778.h>
#include <asm/mach/arch.h>
static void __init bockw_init(void)
{
r8a7778_clock_init();
r8a7778_add_standard_devices();
}
static const char *bockw_boards_compat_dt[] __initdata = {
"renesas,bockw",
NULL,
};
DT_MACHINE_START(BOCKW_DT, "bockw")
.init_early = r8a7778_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = bockw_init,
.init_time = shmobile_timer_init,
.dt_compat = bockw_boards_compat_dt,
MACHINE_END
arch/arm/mach-shmobile/board-bonito.c
View file @ 16eaaee4
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/regulator/fixed.h>
......@@ -288,6 +289,16 @@ static struct platform_device lcdc0_device = {
},
};
static const struct pinctrl_map lcdc0_pinctrl_map[] = {
/* LCD0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
"lcd0_data24_1", "lcd0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
"lcd0_lclk_1", "lcd0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
"lcd0_sync", "lcd0"),
};
/*
* SMSC 9221
*/
......@@ -392,8 +403,8 @@ static void __init bonito_init(void)
/*
* base board settings
*/
gpio_request_one(GPIO_PORT176, GPIOF_IN, NULL);
if (!gpio_get_value(GPIO_PORT176)) {
gpio_request_one(176, GPIOF_IN, NULL);
if (!gpio_get_value(176)) {
u16 bsw2;
u16 bsw3;
u16 bsw4;
......@@ -430,38 +441,11 @@ static void __init bonito_init(void)
*/
if (BIT_ON(bsw2, 3) && /* S38.1 = OFF */
BIT_ON(bsw2, 2)) { /* S38.2 = OFF */
gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
gpio_request(GPIO_FN_LCD0_D0, NULL);
gpio_request(GPIO_FN_LCD0_D1, NULL);
gpio_request(GPIO_FN_LCD0_D2, NULL);
gpio_request(GPIO_FN_LCD0_D3, NULL);
gpio_request(GPIO_FN_LCD0_D4, NULL);
gpio_request(GPIO_FN_LCD0_D5, NULL);
gpio_request(GPIO_FN_LCD0_D6, NULL);
gpio_request(GPIO_FN_LCD0_D7, NULL);
gpio_request(GPIO_FN_LCD0_D8, NULL);
gpio_request(GPIO_FN_LCD0_D9, NULL);
gpio_request(GPIO_FN_LCD0_D10, NULL);
gpio_request(GPIO_FN_LCD0_D11, NULL);
gpio_request(GPIO_FN_LCD0_D12, NULL);
gpio_request(GPIO_FN_LCD0_D13, NULL);
gpio_request(GPIO_FN_LCD0_D14, NULL);
gpio_request(GPIO_FN_LCD0_D15, NULL);
gpio_request(GPIO_FN_LCD0_D16, NULL);
gpio_request(GPIO_FN_LCD0_D17, NULL);
gpio_request(GPIO_FN_LCD0_D18_PORT163, NULL);
gpio_request(GPIO_FN_LCD0_D19_PORT162, NULL);
gpio_request(GPIO_FN_LCD0_D20_PORT161, NULL);
gpio_request(GPIO_FN_LCD0_D21_PORT158, NULL);
gpio_request(GPIO_FN_LCD0_D22_PORT160, NULL);
gpio_request(GPIO_FN_LCD0_D23_PORT159, NULL);
gpio_request(GPIO_FN_LCD0_DCK, NULL);
gpio_request(GPIO_FN_LCD0_VSYN, NULL);
gpio_request(GPIO_FN_LCD0_HSYN, NULL);
gpio_request(GPIO_FN_LCD0_DISP, NULL);
gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL);
gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH,
pinctrl_register_mappings(lcdc0_pinctrl_map,
ARRAY_SIZE(lcdc0_pinctrl_map));
gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
gpio_request_one(61, GPIOF_OUT_INIT_HIGH,
NULL); /* LCDDON */
/* backlight on */
......
arch/arm/mach-shmobile/board-kota2.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/board-kzm9g-reference.c 0 → 100644
View file @ 16eaaee4
/*
* KZM-A9-GT board support - Reference Device Tree Implementation
*
* Copyright (C) 2012 Horms Solutions Ltd.
*
* Based on board-kzm9g.c
* Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/input.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static unsigned long pin_pullup_conf[] = {
PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
};
static const struct pinctrl_map kzm_pinctrl_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0",
"i2c3_1", "i2c3"),
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
"mmc0_ctrl_0", "mmc0"),
PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
"PORT279", pin_pullup_conf),
PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
"mmc0_data8_0", pin_pullup_conf),
/* SCIFA4 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
"scifa4_data", "scifa4"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
"scifa4_ctrl", "scifa4"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
"sdhi0_wp", "sdhi0"),
/* SDHI2 */
PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
"sdhi2_data4", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
"sdhi2_ctrl", "sdhi2"),
};
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
sh73a0_pinmux_init();
/* enable SD */
gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
#endif
}
static const char *kzm9g_boards_compat_dt[] __initdata = {
"renesas,kzm9g-reference",
NULL,
};
DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = irqchip_init,
.init_machine = kzm_init,
.init_time = shmobile_timer_init,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
arch/arm/mach-shmobile/board-kzm9g.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/board-lager.c 0 → 100644
View file @ 16eaaee4
/*
* Lager board support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/common.h>
#include <mach/r8a7790.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static void __init lager_add_standard_devices(void)
{
r8a7790_clock_init();
r8a7790_add_standard_devices();
}
static const char *lager_boards_compat_dt[] __initdata = {
"renesas,lager",
NULL,
};
DT_MACHINE_START(LAGER_DT, "lager")
.init_irq = irqchip_init,
.init_time = shmobile_timer_init,
.init_machine = lager_add_standard_devices,
.dt_compat = lager_boards_compat_dt,
MACHINE_END
arch/arm/mach-shmobile/board-mackerel.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/board-marzen-reference.c 0 → 100644
View file @ 16eaaee4
/*
* marzen board support - Reference DT implementation
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2011 Magnus Damm
* Copyright (C) 2013 Simon Horman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/pinctrl/machine.h>
#include <mach/r8a7779.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
static const struct pinctrl_map marzen_pinctrl_map[] = {
/* SCIF2 (CN18: DEBUG0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
"scif2_data_c", "scif2"),
/* SCIF4 (CN19: DEBUG1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
"scif4_data", "scif4"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_wp", "sdhi0"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"intc_irq1_b", "intc"),
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"lbsc_ex_cs0", "lbsc"),
};
static void __init marzen_init(void)
{
pinctrl_register_mappings(marzen_pinctrl_map,
ARRAY_SIZE(marzen_pinctrl_map));
r8a7779_pinmux_init();
r8a7779_add_standard_devices_dt();
}
static const char *marzen_boards_compat_dt[] __initdata = {
"renesas,marzen-reference",
NULL,
};
DT_MACHINE_START(MARZEN, "marzen")
.smp = smp_ops(r8a7779_smp_ops),
.map_io = r8a7779_map_io,
.init_early = r8a7779_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq_dt,
.init_machine = marzen_init,
.init_time = shmobile_timer_init,
.dt_compat = marzen_boards_compat_dt,
MACHINE_END
arch/arm/mach-shmobile/board-marzen.c
View file @ 16eaaee4
......@@ -25,8 +25,9 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/dma-mapping.h>
#include <linux/pinctrl/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
......@@ -67,7 +68,7 @@ static struct resource smsc911x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(28), /* IRQ 1 */
.start = gic_iid(0x3c), /* IRQ 1 */
.flags = IORESOURCE_IRQ,
},
};
......@@ -97,7 +98,7 @@ static struct resource sdhi0_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(104),
.start = gic_iid(0x88),
.flags = IORESOURCE_IRQ,
},
};
......@@ -168,12 +169,43 @@ static struct platform_device usb_phy_device = {
.num_resources = ARRAY_SIZE(usb_phy_resources),
};
/* LEDS */
static struct gpio_led marzen_leds[] = {
{
.name = "led2",
.gpio = 157,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led3",
.gpio = 158,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led4",
.gpio = 159,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static struct gpio_led_platform_data marzen_leds_pdata = {
.leds = marzen_leds,
.num_leds = ARRAY_SIZE(marzen_leds),
};
static struct platform_device leds_device = {
.name = "leds-gpio",
.id = 0,
.dev = {
.platform_data = &marzen_leds_pdata,
},
};
static struct platform_device *marzen_devices[] __initdata = {
&eth_device,
&sdhi0_device,
&thermal_device,
&hspi_device,
&usb_phy_device,
&leds_device,
};
/* USB */
......@@ -215,7 +247,7 @@ static struct resource ehci0_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(44),
.start = gic_iid(0x4c),
.flags = IORESOURCE_IRQ,
},
};
......@@ -239,7 +271,7 @@ static struct resource ehci1_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(45),
.start = gic_iid(0x4d),
.flags = IORESOURCE_IRQ,
},
};
......@@ -269,7 +301,7 @@ static struct resource ohci0_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(44),
.start = gic_iid(0x4c),
.flags = IORESOURCE_IRQ,
},
};
......@@ -293,7 +325,7 @@ static struct resource ohci1_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(45),
.start = gic_iid(0x4d),
.flags = IORESOURCE_IRQ,
},
};
......@@ -327,6 +359,41 @@ void __init marzen_init_late(void)
ARRAY_SIZE(marzen_late_devices));
}
static const struct pinctrl_map marzen_pinctrl_map[] = {
/* HSPI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
"hspi0", "hspi0"),
/* SCIF2 (CN18: DEBUG0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
"scif2_data_c", "scif2"),
/* SCIF4 (CN19: DEBUG1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
"scif4_data", "scif4"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_wp", "sdhi0"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"intc_irq1_b", "intc"),
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"lbsc_ex_cs0", "lbsc"),
/* USB0 */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
"usb0", "usb0"),
/* USB1 */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
"usb1", "usb1"),
/* USB2 */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
"usb2", "usb2"),
};
static void __init marzen_init(void)
{
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
......@@ -334,44 +401,10 @@ static void __init marzen_init(void)
regulator_register_fixed(1, dummy_supplies,
ARRAY_SIZE(dummy_supplies));
pinctrl_register_mappings(marzen_pinctrl_map,
ARRAY_SIZE(marzen_pinctrl_map));
r8a7779_pinmux_init();
/* SCIF2 (CN18: DEBUG0) */
gpio_request(GPIO_FN_TX2_C, NULL);
gpio_request(GPIO_FN_RX2_C, NULL);
/* SCIF4 (CN19: DEBUG1) */
gpio_request(GPIO_FN_TX4, NULL);
gpio_request(GPIO_FN_RX4, NULL);
/* LAN89218 */
gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */
gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */
/* SD0 (CN20) */
gpio_request(GPIO_FN_SD0_CLK, NULL);
gpio_request(GPIO_FN_SD0_CMD, NULL);
gpio_request(GPIO_FN_SD0_DAT0, NULL);
gpio_request(GPIO_FN_SD0_DAT1, NULL);
gpio_request(GPIO_FN_SD0_DAT2, NULL);
gpio_request(GPIO_FN_SD0_DAT3, NULL);
gpio_request(GPIO_FN_SD0_CD, NULL);
gpio_request(GPIO_FN_SD0_WP, NULL);
/* HSPI 0 */
gpio_request(GPIO_FN_HSPI_CLK0, NULL);
gpio_request(GPIO_FN_HSPI_CS0, NULL);
gpio_request(GPIO_FN_HSPI_TX0, NULL);
gpio_request(GPIO_FN_HSPI_RX0, NULL);
/* USB (CN21) */
gpio_request(GPIO_FN_USB_OVC0, NULL);
gpio_request(GPIO_FN_USB_OVC1, NULL);
gpio_request(GPIO_FN_USB_OVC2, NULL);
/* USB (CN22) */
gpio_request(GPIO_FN_USB_PENC2, NULL);
r8a7779_add_standard_devices();
platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
}
......
arch/arm/mach-shmobile/clock-r8a73a4.c 0 → 100644
View file @ 16eaaee4
/*
* r8a73a4 clock framework support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/common.h>
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x270
#define MPCKCR 0xe6150080
#define SMSTPCR2 0xe6150138
#define SMSTPCR5 0xe6150144
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
.len = CPG_LEN,
};
static struct clk extalr_clk = {
.rate = 32768,
.mapping = &cpg_mapping,
};
static struct clk extal1_clk = {
.rate = 26000000,
.mapping = &cpg_mapping,
};
static struct clk extal2_clk = {
.rate = 48000000,
.mapping = &cpg_mapping,
};
static struct clk *main_clks[] = {
&extalr_clk,
&extal1_clk,
&extal2_clk,
};
enum {
MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
MSTP522,
MSTP_NR
};
static struct clk mstp_clks[MSTP_NR] = {
[MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
[MSTP206] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
[MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */
[MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
};
static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
/* for DT */
CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
};
void __init r8a73a4_clock_init(void)
{
void __iomem *cpg_base, *reg;
int k, ret = 0;
/* fix MPCLK to EXTAL2 for now.
* this is needed until more detailed clock topology is supported
*/
cpg_base = ioremap_nocache(CPG_BASE, CPG_LEN);
BUG_ON(!cpg_base);
reg = cpg_base + (MPCKCR - CPG_BASE);
iowrite32(ioread32(reg) | 1 << 7 | 0x0c, reg); /* set CKSEL */
iounmap(cpg_base);
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
shmobile_clk_init();
else
panic("failed to setup r8a73a4 clocks\n");
}
arch/arm/mach-shmobile/clock-r8a7740.c
View file @ 16eaaee4
......@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
#include <mach/r8a7740.h>
......@@ -97,42 +98,13 @@ static struct clk dv_clk = {
.rate = 27000000,
};
static unsigned long div_recalc(struct clk *clk)
{
return clk->parent->rate / (int)(clk->priv);
}
static struct sh_clk_ops div_clk_ops = {
.recalc = div_recalc,
};
/* extal1 / 2 */
static struct clk extal1_div2_clk = {
.ops = &div_clk_ops,
.priv = (void *)2,
.parent = &extal1_clk,
};
/* extal1 / 1024 */
static struct clk extal1_div1024_clk = {
.ops = &div_clk_ops,
.priv = (void *)1024,
.parent = &extal1_clk,
};
/* extal1 / 2 / 1024 */
static struct clk extal1_div2048_clk = {
.ops = &div_clk_ops,
.priv = (void *)1024,
.parent = &extal1_div2_clk,
};
SH_CLK_RATIO(div2, 1, 2);
SH_CLK_RATIO(div1k, 1, 1024);
/* extal2 / 2 */
static struct clk extal2_div2_clk = {
.ops = &div_clk_ops,
.priv = (void *)2,
.parent = &extal2_clk,
};
SH_FIXED_RATIO_CLK(extal1_div2_clk, extal1_clk, div2);
SH_FIXED_RATIO_CLK(extal1_div1024_clk, extal1_clk, div1k);
SH_FIXED_RATIO_CLK(extal1_div2048_clk, extal1_div2_clk, div1k);
SH_FIXED_RATIO_CLK(extal2_div2_clk, extal2_clk, div2);
static struct sh_clk_ops followparent_clk_ops = {
.recalc = followparent_recalc,
......@@ -143,11 +115,7 @@ static struct clk system_clk = {
.ops = &followparent_clk_ops,
};
static struct clk system_div2_clk = {
.ops = &div_clk_ops,
.priv = (void *)2,
.parent = &system_clk,
};
SH_FIXED_RATIO_CLK(system_div2_clk, system_clk, div2);
/* r_clk */
static struct clk r_clk = {
......@@ -184,11 +152,7 @@ static struct clk pllc1_clk = {
};
/* PLLC1 / 2 */
static struct clk pllc1_div2_clk = {
.ops = &div_clk_ops,
.priv = (void *)2,
.parent = &pllc1_clk,
};
SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2);
/* USB clock */
/*
......@@ -323,6 +287,7 @@ struct clk *main_clks[] = {
&fsibck_clk,
};
/* DIV4 clocks */
static void div4_kick(struct clk *clk)
{
unsigned long value;
......@@ -346,6 +311,26 @@ static struct clk_div4_table div4_table = {
.kick = div4_kick,
};
enum {
DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
DIV4_NR
};
struct clk div4_clks[DIV4_NR] = {
[DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0),
[DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
[DIV4_USBP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
[DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
[DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0),
[DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0),
[DIV4_CP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 0, 0x6fff, 0),
};
/* DIV6 reparent */
enum {
DIV6_HDMI,
......@@ -391,6 +376,16 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2),
};
/* DIV6 clocks */
enum {
DIV6_SUB,
DIV6_NR
};
static struct clk div6_clks[DIV6_NR] = {
[DIV6_SUB] = SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
};
/* HDMI1/2 clock */
static unsigned long hdmi12_recalc(struct clk *clk)
{
......@@ -455,35 +450,6 @@ static struct clk fsidivs[] = {
};
/* MSTP */
enum {
DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
DIV4_NR
};
struct clk div4_clks[DIV4_NR] = {
[DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0),
[DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
[DIV4_USBP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
[DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
[DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0),
[DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0),
[DIV4_CP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 0, 0x6fff, 0),
};
enum {
DIV6_SUB,
DIV6_NR
};
static struct clk div6_clks[DIV6_NR] = {
[DIV6_SUB] = SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
};
enum {
MSTP128, MSTP127, MSTP125,
MSTP116, MSTP111, MSTP100, MSTP117,
......@@ -593,29 +559,42 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
CLKDEV_DEV_ID("e6c80000.sci", &mstp_clks[MSTP200]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]),
CLKDEV_DEV_ID("e6c70000.sci", &mstp_clks[MSTP201]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]),
CLKDEV_DEV_ID("e6c60000.sci", &mstp_clks[MSTP202]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("e6c50000.sci", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("e6c40000.sci", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("e6c30000.sci", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("e6cb0000.sci", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]),
CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("e6cd0000.sci", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
CLKDEV_DEV_ID("e6cc0000.sci", &mstp_clks[MSTP230]),
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]),
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]),
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]),
CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]),
/* ICK */
CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]),
......
arch/arm/mach-shmobile/clock-r8a7778.c 0 → 100644
View file @ 16eaaee4
/*
* r8a7778 clock framework support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* based on r8a7779
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2011 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/common.h>
#define MSTPCR0 IOMEM(0xffc80030)
#define MSTPCR1 IOMEM(0xffc80034)
#define MSTPCR3 IOMEM(0xffc8003c)
#define MSTPSR1 IOMEM(0xffc80044)
#define MSTPSR4 IOMEM(0xffc80048)
#define MSTPSR6 IOMEM(0xffc8004c)
#define MSTPCR4 IOMEM(0xffc80050)
#define MSTPCR5 IOMEM(0xffc80054)
#define MSTPCR6 IOMEM(0xffc80058)
/* ioremap() through clock mapping mandatory to avoid
* collision with ARM coherent DMA virtual memory range.
*/
static struct clk_mapping cpg_mapping = {
.phys = 0xffc80000,
.len = 0x80,
};
static struct clk clkp = {
.rate = 62500000, /* FIXME: shortcut */
.flags = CLK_ENABLE_ON_INIT,
.mapping = &cpg_mapping,
};
static struct clk *main_clks[] = {
&clkp,
};
enum {
MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
MSTP016, MSTP015,
MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP026] = SH_CLK_MSTP32(&clkp, MSTPCR0, 26, 0), /* SCIF0 */
[MSTP025] = SH_CLK_MSTP32(&clkp, MSTPCR0, 25, 0), /* SCIF1 */
[MSTP024] = SH_CLK_MSTP32(&clkp, MSTPCR0, 24, 0), /* SCIF2 */
[MSTP023] = SH_CLK_MSTP32(&clkp, MSTPCR0, 23, 0), /* SCIF3 */
[MSTP022] = SH_CLK_MSTP32(&clkp, MSTPCR0, 22, 0), /* SCIF4 */
[MSTP021] = SH_CLK_MSTP32(&clkp, MSTPCR0, 21, 0), /* SCIF5 */
[MSTP016] = SH_CLK_MSTP32(&clkp, MSTPCR0, 16, 0), /* TMU0 */
[MSTP015] = SH_CLK_MSTP32(&clkp, MSTPCR0, 15, 0), /* TMU1 */
};
static struct clk_lookup lookups[] = {
/* MSTP32 clocks */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
};
void __init r8a7778_clock_init(void)
{
int k, ret = 0;
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
shmobile_clk_init();
else
panic("failed to setup r8a7778 clocks\n");
}
arch/arm/mach-shmobile/clock-r8a7779.c
View file @ 16eaaee4
......@@ -17,13 +17,17 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
#define MD(nr) BIT(nr)
#define FRQMR IOMEM(0xffc80014)
#define MSTPCR0 IOMEM(0xffc80030)
#define MSTPCR1 IOMEM(0xffc80034)
......@@ -36,6 +40,9 @@
#define MSTPCR6 IOMEM(0xffc80058)
#define MSTPCR7 IOMEM(0xffc80040)
#define MODEMR 0xffcc0020
/* ioremap() through clock mapping mandatory to avoid
* collision with ARM coherent DMA virtual memory range.
*/
......@@ -50,44 +57,44 @@ static struct clk_mapping cpg_mapping = {
* from the platform code.
*/
static struct clk plla_clk = {
.rate = 1500000000,
/* .rate will be updated on r8a7779_clock_init() */
.mapping = &cpg_mapping,
};
/*
* clock ratio of these clock will be updated
* on r8a7779_clock_init()
*/
SH_FIXED_RATIO_CLK_SET(clkz_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkzs_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clki_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clks_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clks1_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clks3_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clks4_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkb_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkout_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkp_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkg_clk, plla_clk, 1, 1);
static struct clk *main_clks[] = {
&plla_clk,
};
static int divisors[] = { 0, 0, 0, 6, 8, 12, 16, 0, 24, 32, 36, 0, 0, 0, 0, 0 };
static struct clk_div_mult_table div4_div_mult_table = {
.divisors = divisors,
.nr_divisors = ARRAY_SIZE(divisors),
};
static struct clk_div4_table div4_table = {
.div_mult_table = &div4_div_mult_table,
};
enum { DIV4_S, DIV4_OUT, DIV4_S4, DIV4_S3, DIV4_S1, DIV4_P, DIV4_NR };
static struct clk div4_clks[DIV4_NR] = {
[DIV4_S] = SH_CLK_DIV4(&plla_clk, FRQMR, 20,
0x0018, CLK_ENABLE_ON_INIT),
[DIV4_OUT] = SH_CLK_DIV4(&plla_clk, FRQMR, 16,
0x0700, CLK_ENABLE_ON_INIT),
[DIV4_S4] = SH_CLK_DIV4(&plla_clk, FRQMR, 12,
0x0040, CLK_ENABLE_ON_INIT),
[DIV4_S3] = SH_CLK_DIV4(&plla_clk, FRQMR, 8,
0x0010, CLK_ENABLE_ON_INIT),
[DIV4_S1] = SH_CLK_DIV4(&plla_clk, FRQMR, 4,
0x0060, CLK_ENABLE_ON_INIT),
[DIV4_P] = SH_CLK_DIV4(&plla_clk, FRQMR, 0,
0x0300, CLK_ENABLE_ON_INIT),
&clkz_clk,
&clkzs_clk,
&clki_clk,
&clks_clk,
&clks1_clk,
&clks3_clk,
&clks4_clk,
&clkb_clk,
&clkout_clk,
&clkp_clk,
&clkg_clk,
};
enum { MSTP323, MSTP322, MSTP321, MSTP320,
MSTP101, MSTP100,
MSTP115,
MSTP103, MSTP101, MSTP100,
MSTP030,
MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
MSTP016, MSTP015, MSTP014,
......@@ -95,50 +102,28 @@ enum { MSTP323, MSTP322, MSTP321, MSTP320,
MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0), /* SDHI0 */
[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
[MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 1, 0), /* USB2 */
[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0), /* USB0/1 */
[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */
[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */
[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */
[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0), /* I2C3 */
[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */
[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */
[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */
[MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0), /* SCIF3 */
[MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0), /* SCIF4 */
[MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0), /* SCIF5 */
[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */
[MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */
[MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */
[MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR0, 7, 0), /* HSPI */
};
static unsigned long mul4_recalc(struct clk *clk)
{
return clk->parent->rate * 4;
}
static struct sh_clk_ops mul4_clk_ops = {
.recalc = mul4_recalc,
};
struct clk clkz_clk = {
.ops = &mul4_clk_ops,
.parent = &div4_clks[DIV4_S],
};
struct clk clkzs_clk = {
/* clks x 4 / 4 = clks */
.parent = &div4_clks[DIV4_S],
};
static struct clk *late_main_clks[] = {
&clkz_clk,
&clkzs_clk,
[MSTP323] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 23, 0), /* SDHI0 */
[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
[MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
[MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 3, 0), /* DU */
[MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 1, 0), /* USB2 */
[MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 0, 0), /* USB0/1 */
[MSTP030] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 30, 0), /* I2C0 */
[MSTP029] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 29, 0), /* I2C1 */
[MSTP028] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 28, 0), /* I2C2 */
[MSTP027] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 27, 0), /* I2C3 */
[MSTP026] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 26, 0), /* SCIF0 */
[MSTP025] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 25, 0), /* SCIF1 */
[MSTP024] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 24, 0), /* SCIF2 */
[MSTP023] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 23, 0), /* SCIF3 */
[MSTP022] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 22, 0), /* SCIF4 */
[MSTP021] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 21, 0), /* SCIF5 */
[MSTP016] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 16, 0), /* TMU0 */
[MSTP015] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 15, 0), /* TMU1 */
[MSTP014] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 14, 0), /* TMU2 */
[MSTP007] = SH_CLK_MSTP32(&clks_clk, MSTPCR0, 7, 0), /* HSPI */
};
static struct clk_lookup lookups[] = {
......@@ -148,14 +133,16 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("clkzs_clk", &clkzs_clk),
/* DIV4 clocks */
CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_S]),
CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_OUT]),
CLKDEV_CON_ID("shyway4_clk", &div4_clks[DIV4_S4]),
CLKDEV_CON_ID("shyway3_clk", &div4_clks[DIV4_S3]),
CLKDEV_CON_ID("shyway1_clk", &div4_clks[DIV4_S1]),
CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
CLKDEV_CON_ID("shyway_clk", &clks_clk),
CLKDEV_CON_ID("bus_clk", &clkout_clk),
CLKDEV_CON_ID("shyway4_clk", &clks4_clk),
CLKDEV_CON_ID("shyway3_clk", &clks3_clk),
CLKDEV_CON_ID("shyway1_clk", &clks1_clk),
CLKDEV_CON_ID("peripheral_clk", &clkp_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */
CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
......@@ -180,24 +167,65 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */
};
void __init r8a7779_clock_init(void)
{
void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
u32 mode;
int k, ret = 0;
BUG_ON(!modemr);
mode = ioread32(modemr);
iounmap(modemr);
if (mode & MD(1)) {
plla_clk.rate = 1500000000;
SH_CLK_SET_RATIO(&clkz_clk_ratio, 2, 3);
SH_CLK_SET_RATIO(&clkzs_clk_ratio, 1, 6);
SH_CLK_SET_RATIO(&clki_clk_ratio, 1, 2);
SH_CLK_SET_RATIO(&clks_clk_ratio, 1, 6);
SH_CLK_SET_RATIO(&clks1_clk_ratio, 1, 12);
SH_CLK_SET_RATIO(&clks3_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&clks4_clk_ratio, 1, 16);
SH_CLK_SET_RATIO(&clkp_clk_ratio, 1, 24);
SH_CLK_SET_RATIO(&clkg_clk_ratio, 1, 24);
if (mode & MD(2)) {
SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 36);
SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 36);
} else {
SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 24);
SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 24);
}
} else {
plla_clk.rate = 1600000000;
SH_CLK_SET_RATIO(&clkz_clk_ratio, 1, 2);
SH_CLK_SET_RATIO(&clkzs_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&clki_clk_ratio, 1, 2);
SH_CLK_SET_RATIO(&clks_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&clks1_clk_ratio, 1, 16);
SH_CLK_SET_RATIO(&clks3_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&clks4_clk_ratio, 1, 16);
SH_CLK_SET_RATIO(&clkp_clk_ratio, 1, 32);
SH_CLK_SET_RATIO(&clkg_clk_ratio, 1, 24);
if (mode & MD(2)) {
SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 32);
SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 32);
} else {
SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 24);
SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 24);
}
}
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
ret = clk_register(late_main_clks[k]);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
......
arch/arm/mach-shmobile/clock-r8a7790.c 0 → 100644
View file @ 16eaaee4
/*
* r8a7790 clock framework support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/common.h>
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x1000
#define SMSTPCR2 0xe6150138
#define SMSTPCR7 0xe615014c
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
.len = CPG_LEN,
};
static struct clk p_clk = {
.rate = 65000000, /* shortcut for now */
.mapping = &cpg_mapping,
};
static struct clk mp_clk = {
.rate = 52000000, /* shortcut for now */
.mapping = &cpg_mapping,
};
static struct clk *main_clks[] = {
&p_clk,
&mp_clk,
};
enum { MSTP721, MSTP720,
MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
};
static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
};
void __init r8a7790_clock_init(void)
{
int k, ret = 0;
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
shmobile_clk_init();
else
panic("failed to setup r8a7790 clocks\n");
}
arch/arm/mach-shmobile/clock-sh7372.c
View file @ 16eaaee4
......@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
/* SH7372 registers */
......@@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = {
.rate = 48000000,
};
/* A fixed divide-by-2 block */
static unsigned long div2_recalc(struct clk *clk)
{
return clk->parent->rate / 2;
}
static struct sh_clk_ops div2_clk_ops = {
.recalc = div2_recalc,
};
SH_CLK_RATIO(div2, 1, 2);
/* Divide dv_clki by two */
struct clk sh7372_dv_clki_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh7372_dv_clki_clk,
};
/* Divide extal1 by two */
static struct clk extal1_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh7372_extal1_clk,
};
/* Divide extal2 by two */
static struct clk extal2_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh7372_extal2_clk,
};
/* Divide extal2 by four */
static struct clk extal2_div4_clk = {
.ops = &div2_clk_ops,
.parent = &extal2_div2_clk,
};
SH_FIXED_RATIO_CLKg(sh7372_dv_clki_div2_clk, sh7372_dv_clki_clk, div2);
SH_FIXED_RATIO_CLK(extal1_div2_clk, sh7372_extal1_clk, div2);
SH_FIXED_RATIO_CLK(extal2_div2_clk, sh7372_extal2_clk, div2);
SH_FIXED_RATIO_CLK(extal2_div4_clk, extal2_div2_clk, div2);
/* PLLC0 and PLLC1 */
static unsigned long pllc01_recalc(struct clk *clk)
......@@ -147,10 +121,7 @@ static struct clk pllc1_clk = {
};
/* Divide PLLC1 by two */
static struct clk pllc1_div2_clk = {
.ops = &div2_clk_ops,
.parent = &pllc1_clk,
};
SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2);
/* PLLC2 */
......@@ -342,7 +313,7 @@ static struct clk_div4_table div4_table = {
};
enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP,
DIV4_ZX, DIV4_HP,
DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP,
DIV4_DDRP, DIV4_NR };
......@@ -355,8 +326,6 @@ static struct clk div4_clks[DIV4_NR] = {
[DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0),
[DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0),
[DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0),
[DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0),
[DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0),
[DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
......@@ -516,8 +485,6 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
......@@ -654,5 +621,4 @@ void __init sh7372_clock_init(void)
shmobile_clk_init();
else
panic("failed to setup sh7372 clocks\n");
}
arch/arm/mach-shmobile/clock-sh73a0.c
View file @ 16eaaee4
......@@ -21,6 +21,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <asm/processor.h>
#include <mach/clock.h>
#include <mach/common.h>
#define FRQCRA IOMEM(0xe6150000)
......@@ -82,61 +84,16 @@ struct clk sh73a0_extal2_clk = {
.rate = 48000000,
};
/* A fixed divide-by-2 block */
static unsigned long div2_recalc(struct clk *clk)
{
return clk->parent->rate / 2;
}
static struct sh_clk_ops div2_clk_ops = {
.recalc = div2_recalc,
};
static unsigned long div7_recalc(struct clk *clk)
{
return clk->parent->rate / 7;
}
static struct sh_clk_ops div7_clk_ops = {
.recalc = div7_recalc,
};
static unsigned long div13_recalc(struct clk *clk)
{
return clk->parent->rate / 13;
}
static struct sh_clk_ops div13_clk_ops = {
.recalc = div13_recalc,
};
/* Divide extal1 by two */
static struct clk extal1_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh73a0_extal1_clk,
};
/* Divide extal2 by two */
static struct clk extal2_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh73a0_extal2_clk,
};
static struct sh_clk_ops main_clk_ops = {
.recalc = followparent_recalc,
};
/* Main clock */
static struct clk main_clk = {
/* .parent wll be set on sh73a0_clock_init() */
.ops = &main_clk_ops,
};
/* Divide Main clock by two */
static struct clk main_div2_clk = {
.ops = &div2_clk_ops,
.parent = &main_clk,
};
/* PLL0, PLL1, PLL2, PLL3 */
static unsigned long pll_recalc(struct clk *clk)
{
......@@ -192,21 +149,17 @@ static struct clk pll3_clk = {
.enable_bit = 3,
};
/* Divide PLL */
static struct clk pll1_div2_clk = {
.ops = &div2_clk_ops,
.parent = &pll1_clk,
};
static struct clk pll1_div7_clk = {
.ops = &div7_clk_ops,
.parent = &pll1_clk,
};
/* A fixed divide block */
SH_CLK_RATIO(div2, 1, 2);
SH_CLK_RATIO(div7, 1, 7);
SH_CLK_RATIO(div13, 1, 13);
static struct clk pll1_div13_clk = {
.ops = &div13_clk_ops,
.parent = &pll1_clk,
};
SH_FIXED_RATIO_CLK(extal1_div2_clk, sh73a0_extal1_clk, div2);
SH_FIXED_RATIO_CLK(extal2_div2_clk, sh73a0_extal2_clk, div2);
SH_FIXED_RATIO_CLK(main_div2_clk, main_clk, div2);
SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2);
SH_FIXED_RATIO_CLK(pll1_div7_clk, pll1_clk, div7);
SH_FIXED_RATIO_CLK(pll1_div13_clk, pll1_clk, div13);
/* External input clock */
struct clk sh73a0_extcki_clk = {
......@@ -234,14 +187,24 @@ static struct clk *main_clks[] = {
&sh73a0_extalr_clk,
};
static void div4_kick(struct clk *clk)
static int frqcr_kick(void)
{
unsigned long value;
int i;
/* set KICK bit in FRQCRB to update hardware setting, check success */
__raw_writel(__raw_readl(FRQCRB) | (1 << 31), FRQCRB);
for (i = 1000; i; i--)
if (__raw_readl(FRQCRB) & (1 << 31))
cpu_relax();
else
return i;
/* set KICK bit in FRQCRB to update hardware setting */
value = __raw_readl(FRQCRB);
value |= (1 << 31);
__raw_writel(value, FRQCRB);
return -ETIMEDOUT;
}
static void div4_kick(struct clk *clk)
{
frqcr_kick();
}
static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
......@@ -258,25 +221,37 @@ static struct clk_div4_table div4_table = {
};
enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
DIV4_Z, DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP, DIV4_NR };
DIV4_Z, DIV4_ZX, DIV4_HP, DIV4_NR };
#define DIV4(_reg, _bit, _mask, _flags) \
SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
static struct clk div4_clks[DIV4_NR] = {
[DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT),
[DIV4_ZG] = DIV4(FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
[DIV4_ZG] = SH_CLK_DIV4(&pll0_clk, FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
[DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
[DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT),
[DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0),
[DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0),
[DIV4_Z] = DIV4(FRQCRB, 24, 0x97f, 0),
[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0),
[DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0),
[DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0),
[DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0),
[DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0),
};
static unsigned long twd_recalc(struct clk *clk)
{
return clk_get_rate(clk->parent) / 4;
}
static struct sh_clk_ops twd_clk_ops = {
.recalc = twd_recalc,
};
static struct clk twd_clk = {
.parent = &div4_clks[DIV4_Z],
.ops = &twd_clk_ops,
};
enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
......@@ -471,6 +446,7 @@ static struct clk dsi1phy_clk = {
static struct clk *late_main_clks[] = {
&dsi0phy_clk,
&dsi1phy_clk,
&twd_clk,
};
enum { MSTP001,
......@@ -535,6 +511,7 @@ static struct clk mstp_clks[MSTP_NR] = {
static struct clk_lookup lookups[] = {
/* main clocks */
CLKDEV_CON_ID("r_clk", &r_clk),
CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
/* DIV6 clocks */
CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
......@@ -581,10 +558,13 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */
CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
......
arch/arm/mach-shmobile/clock.c
View file @ 16eaaee4
......@@ -23,6 +23,19 @@
#include <linux/init.h>
#include <linux/sh_clk.h>
#include <linux/export.h>
#include <mach/clock.h>
#include <mach/common.h>
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
{
struct clk_ratio *p = clk->priv;
return clk->parent->rate / p->div * p->mul;
};
struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
.recalc = shmobile_fixed_ratio_clk_recalc,
};
int __init shmobile_clk_init(void)
{
......
arch/arm/mach-shmobile/headsmp-sh73a0.S → arch/arm/mach-shmobile/headsmp-scu.S
View file @ 16eaaee4
/*
* SMP support for SoC sh73a0
* Shared SCU setup for mach-shmobile
*
* Copyright (C) 2012 Bastian Hecht
*
......@@ -35,11 +35,12 @@
* the physical address as the MMU is still turned off.
*/
.align 12
ENTRY(sh73a0_secondary_vector)
ENTRY(shmobile_secondary_vector_scu)
mrc p15, 0, r0, c0, c0, 5 @ read MIPDR
and r0, r0, #3 @ mask out cpu ID
lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
mov r1, #0xf0000000 @ SCU base address
ldr r1, 2f
ldr r1, [r1] @ SCU base address
ldr r2, [r1, #8] @ SCU Power Status Register
mov r3, #3
bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
......@@ -47,4 +48,10 @@ ENTRY(sh73a0_secondary_vector)
ldr pc, 1f
1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
ENDPROC(sh73a0_secondary_vector)
2: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
ENDPROC(shmobile_secondary_vector_scu)
.text
.globl shmobile_scu_base
shmobile_scu_base:
.space 4
arch/arm/mach-shmobile/hotplug.c deleted 100644 → 0
View file @ 8bb96604
/*
* SMP support for R-Mobile / SH-Mobile
*
* Copyright (C) 2010 Magnus Damm
*
* Based on realview, Copyright (C) 2002 ARM Ltd, All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <mach/common.h>
#include <mach/r8a7779.h>
#include <mach/emev2.h>
#include <asm/cacheflush.h>
#include <asm/mach-types.h>
static cpumask_t dead_cpus;
void shmobile_cpu_die(unsigned int cpu)
{
/* hardware shutdown code running on the CPU that is being offlined */
flush_cache_all();
dsb();
/* notify platform_cpu_kill() that hardware shutdown is finished */
cpumask_set_cpu(cpu, &dead_cpus);
/* wait for SoC code in platform_cpu_kill() to shut off CPU core
* power. CPU bring up starts from the reset vector.
*/
while (1) {
/*
* here's the WFI
*/
asm(".word 0xe320f003\n"
:
:
: "memory", "cc");
}
}
int shmobile_cpu_disable(unsigned int cpu)
{
cpumask_clear_cpu(cpu, &dead_cpus);
/*
* we don't allow CPU 0 to be shutdown (it is still too special
* e.g. clock tick interrupts)
*/
return cpu == 0 ? -EPERM : 0;
}
int shmobile_cpu_disable_any(unsigned int cpu)
{
cpumask_clear_cpu(cpu, &dead_cpus);
return 0;
}
int shmobile_cpu_is_dead(unsigned int cpu)
{
return cpumask_test_cpu(cpu, &dead_cpus);
}
arch/arm/mach-shmobile/include/mach/clock.h 0 → 100644
View file @ 16eaaee4
#ifndef CLOCK_H
#define CLOCK_H
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
/* clock ratio */
struct clk_ratio {
int mul;
int div;
};
#define SH_CLK_RATIO(name, m, d) \
static struct clk_ratio name ##_ratio = { \
.mul = m, \
.div = d, \
}
#define SH_FIXED_RATIO_CLKg(name, p, r) \
struct clk name = { \
.parent = &p, \
.ops = &shmobile_fixed_ratio_clk_ops,\
.priv = &r ## _ratio, \
}
#define SH_FIXED_RATIO_CLK(name, p, r) \
static SH_FIXED_RATIO_CLKg(name, p, r);
#define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \
SH_CLK_RATIO(name, m, d); \
SH_FIXED_RATIO_CLK(name, p, name);
#define SH_CLK_SET_RATIO(p, m, d) \
{ \
(p)->mul = m; \
(p)->div = d; \
}
#endif
arch/arm/mach-shmobile/include/mach/irqs.h
View file @ 16eaaee4
......@@ -5,10 +5,15 @@
/* GIC */
#define gic_spi(nr) ((nr) + 32)
#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
/* INTCS */
#define INTCS_VECT_BASE 0x3400
#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
/* External IRQ pins */
#define IRQPIN_BASE 2000
#define irq_pin(nr) ((nr) + IRQPIN_BASE)
#endif /* __ASM_MACH_IRQS_H */
arch/arm/mach-shmobile/include/mach/r8a73a4.h 0 → 100644
View file @ 16eaaee4
#ifndef __ASM_R8A73A4_H__
#define __ASM_R8A73A4_H__
void r8a73a4_add_standard_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
#endif /* __ASM_R8A73A4_H__ */
arch/arm/mach-shmobile/include/mach/r8a7778.h 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/include/mach/r8a7790.h 0 → 100644
View file @ 16eaaee4
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
void r8a7790_add_standard_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
#endif /* __ASM_R8A7790_H__ */
arch/arm/mach-shmobile/intc-r8a7740.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/intc-r8a7779.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/intc-sh73a0.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/setup-emev2.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a73a4.c 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7740.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7778.c 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7779.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7790.c 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/setup-sh73a0.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/smp-emev2.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/smp-r8a7779.c
View file @ 16eaaee4
This diff is collapsed.
arch/arm/mach-shmobile/smp-sh73a0.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
View file @ 16eaaee4
This diff is collapsed.
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
View file @ 16eaaee4
This diff is collapsed.
drivers/gpio/Kconfig
View file @ 16eaaee4
This diff is collapsed.
drivers/gpio/Makefile
View file @ 16eaaee4
......@@ -57,6 +57,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
......
drivers/gpio/gpio-pl061.c
View file @ 16eaaee4
This diff is collapsed.
drivers/gpio/gpio-rcar.c 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
drivers/gpio/gpiolib-of.c
View file @ 16eaaee4
This diff is collapsed.
drivers/irqchip/Kconfig
View file @ 16eaaee4
This diff is collapsed.
drivers/irqchip/Makefile
View file @ 16eaaee4
This diff is collapsed.
drivers/irqchip/irq-renesas-intc-irqpin.c 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
drivers/irqchip/irq-renesas-irqc.c 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/Kconfig
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/core.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/devicetree.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/mvebu/pinctrl-mvebu.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinconf-generic.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinconf.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinconf.h
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-abx500.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-at91.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-bcm2835.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-exynos5440.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-falcon.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-imx.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-lantiq.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-mxs.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-nomadik.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-pxa3xx.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-samsung.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-single.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-sirf.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-sunxi.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-tegra.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-u300.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/pinctrl-xway.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/Kconfig
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/Makefile
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/core.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/core.h
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/gpio.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-r8a73a4.c 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-r8a7740.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-r8a7779.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7203.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7264.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7269.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7372.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh73a0.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7720.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7722.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7723.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7724.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7734.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7757.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7785.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-sh7786.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-shx3.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/pinctrl.c
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/sh-pfc/sh_pfc.h
View file @ 16eaaee4
This diff is collapsed.
drivers/pinctrl/spear/pinctrl-spear.c
View file @ 16eaaee4
This diff is collapsed.
include/linux/pinctrl/pinctrl.h
View file @ 16eaaee4
This diff is collapsed.
include/linux/platform_data/gpio-rcar.h 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
include/linux/platform_data/irq-renesas-intc-irqpin.h 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
include/linux/platform_data/irq-renesas-irqc.h 0 → 100644
View file @ 16eaaee4
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7