Commit 1715322f authored by David S. Miller's avatar David S. Miller
parents 542a3980 157ca9ea
......@@ -399,15 +399,18 @@ int bcma_bus_scan(struct bcma_bus *bus)
core->bus = bus;
err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
if (err == -ENODEV) {
core_num++;
continue;
} else if (err == -ENXIO)
continue;
else if (err == -ESPIPE)
break;
else if (err < 0)
if (err < 0) {
kfree(core);
if (err == -ENODEV) {
core_num++;
continue;
} else if (err == -ENXIO) {
continue;
} else if (err == -ESPIPE) {
break;
}
return err;
}
core->core_index = core_num++;
bus->nr_cores++;
......
......@@ -91,6 +91,7 @@ static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv,
tx_cmd->tid_tspec = qc[0] & 0xf;
tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
} else {
tx_cmd->tid_tspec = IWL_TID_NON_QOS;
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
else
......@@ -620,7 +621,7 @@ int iwlagn_tx_agg_oper(struct iwl_priv *priv, struct ieee80211_vif *vif,
sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit =
sta_priv->max_agg_bufsize;
IWL_INFO(priv, "Tx aggregation enabled on ra = %pM tid = %d\n",
IWL_DEBUG_HT(priv, "Tx aggregation enabled on ra = %pM tid = %d\n",
sta->addr, tid);
return iwl_send_lq_cmd(priv, ctx,
......@@ -808,6 +809,8 @@ static void iwl_rx_reply_tx_agg(struct iwl_priv *priv,
u32 status = le16_to_cpu(tx_resp->status.status);
int i;
WARN_ON(tid == IWL_TID_NON_QOS);
if (agg->wait_for_ba)
IWL_DEBUG_TX_REPLY(priv,
"got tx response w/o block-ack\n");
......@@ -1035,10 +1038,13 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb,
}
__skb_queue_head_init(&skbs);
priv->tid_data[sta_id][tid].next_reclaimed = next_reclaimed;
IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d",
next_reclaimed);
if (tid != IWL_TID_NON_QOS) {
priv->tid_data[sta_id][tid].next_reclaimed =
next_reclaimed;
IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d",
next_reclaimed);
}
/*we can free until ssn % q.n_bd not inclusive */
WARN_ON(iwl_trans_reclaim(trans(priv), sta_id, tid, txq_id,
......
......@@ -815,6 +815,7 @@ struct iwl_qosparam_cmd {
#define IWL_INVALID_STATION 255
#define IWL_MAX_TID_COUNT 8
#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT
#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2)
#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8)
......
......@@ -1262,6 +1262,7 @@ static int iwl_trans_pcie_reclaim(struct iwl_trans *trans, int sta_id, int tid,
txq->time_stamp = jiffies;
if (unlikely(txq_id >= IWLAGN_FIRST_AMPDU_QUEUE &&
tid != IWL_TID_NON_QOS &&
txq_id != trans_pcie->agg_txq[sta_id][tid])) {
/*
* FIXME: this is a uCode bug which need to be addressed,
......
......@@ -514,9 +514,9 @@ EXPORT_SYMBOL_GPL(rt2800_write_tx_data);
static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2)
{
int rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
int rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
int rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
s8 rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
s8 rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
s8 rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
u16 eeprom;
u8 offset0;
u8 offset1;
......@@ -552,7 +552,7 @@ static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2)
* which gives less energy...
*/
rssi0 = max(rssi0, rssi1);
return max(rssi0, rssi2);
return (int)max(rssi0, rssi2);
}
void rt2800_process_rxwi(struct queue_entry *entry,
......
......@@ -75,7 +75,7 @@ static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
u32 tmp;
/* We do only have one cardbus device behind the bridge. */
if (pc->cardbusmode && (dev >= 1))
if (pc->cardbusmode && (dev > 1))
goto out;
if (bus == 0) {
......
......@@ -611,7 +611,7 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
tid_agg_rx->buf_size;
if (!tid_agg_rx->reorder_buf[index] &&
tid_agg_rx->stored_mpdu_num > 1) {
tid_agg_rx->stored_mpdu_num) {
/*
* No buffers ready to be released, but check whether any
* frames in the reorder buffer have timed out.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment