Merge branch 'pm-next' of...

Merge branch 'pm-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus

arch/arm/mach-omap2/Makefile

@@ -87,6 +87,7 @@ obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o
 obj-$(CONFIG_ARCH_OMAP2420)		+= omap_hwmod_2420_data.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o

arch/arm/mach-omap2/clockdomain.c

@@ -258,97 +258,6 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
 
 }
 
-/**
- * _init_wkdep_usecount - initialize wkdep usecounts to match hardware
- * @clkdm: clockdomain to initialize wkdep usecounts
- *
- * Initialize the wakeup dependency usecount variables for clockdomain @clkdm.
- * If a wakeup dependency is present in the hardware, the usecount will be
- * set to 1; otherwise, it will be set to 0.  Software should clear all
- * software wakeup dependencies prior to calling this function if it wishes
- * to ensure that all usecounts start at 0.  No return value.
- */
-static void _init_wkdep_usecount(struct clockdomain *clkdm)
-{
-	u32 v;
-	struct clkdm_dep *cd;
-
-	if (!clkdm->wkdep_srcs)
-		return;
-
-	for (cd = clkdm->wkdep_srcs; cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
-
-		if (!cd->clkdm && cd->clkdm_name)
-			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
-		if (!cd->clkdm) {
-			WARN(!cd->clkdm, "clockdomain: %s: wkdep clkdm %s not "
-			     "found\n", clkdm->name, cd->clkdm_name);
-			continue;
-		}
-
-		v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
-					    PM_WKDEP,
-					    (1 << cd->clkdm->dep_bit));
-
-		if (v)
-			pr_debug("clockdomain: %s: wakeup dependency already "
-				 "set to wake up when %s wakes\n",
-				 clkdm->name, cd->clkdm->name);
-
-		atomic_set(&cd->wkdep_usecount, (v) ? 1 : 0);
-	}
-}
-
-/**
- * _init_sleepdep_usecount - initialize sleepdep usecounts to match hardware
- * @clkdm: clockdomain to initialize sleepdep usecounts
- *
- * Initialize the sleep dependency usecount variables for clockdomain @clkdm.
- * If a sleep dependency is present in the hardware, the usecount will be
- * set to 1; otherwise, it will be set to 0.  Software should clear all
- * software sleep dependencies prior to calling this function if it wishes
- * to ensure that all usecounts start at 0.  No return value.
- */
-static void _init_sleepdep_usecount(struct clockdomain *clkdm)
-{
-	u32 v;
-	struct clkdm_dep *cd;
-
-	if (!cpu_is_omap34xx())
-		return;
-
-	if (!clkdm->sleepdep_srcs)
-		return;
-
-	for (cd = clkdm->sleepdep_srcs; cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
-
-		if (!cd->clkdm && cd->clkdm_name)
-			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
-		if (!cd->clkdm) {
-			WARN(!cd->clkdm, "clockdomain: %s: sleepdep clkdm %s "
-			     "not found\n", clkdm->name, cd->clkdm_name);
-			continue;
-		}
-
-		v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
-					    OMAP3430_CM_SLEEPDEP,
-					    (1 << cd->clkdm->dep_bit));
-
-		if (v)
-			pr_debug("clockdomain: %s: sleep dependency already "
-				 "set to prevent from idling until %s "
-				 "idles\n", clkdm->name, cd->clkdm->name);
-
-		atomic_set(&cd->sleepdep_usecount, (v) ? 1 : 0);
-	}
-};
-
 /* Public functions */
 
 /**
@@ -379,12 +288,17 @@ void clkdm_init(struct clockdomain **clkdms,
 			_autodep_lookup(autodep);
 
 	/*
-	 * Ensure that the *dep_usecount registers reflect the current
-	 * state of the PRCM.
+	 * Put all clockdomains into software-supervised mode; PM code
+	 * should later enable hardware-supervised mode as appropriate
 	 */
 	list_for_each_entry(clkdm, &clkdm_list, node) {
-		_init_wkdep_usecount(clkdm);
-		_init_sleepdep_usecount(clkdm);
+		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+			omap2_clkdm_wakeup(clkdm);
+		else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO)
+			omap2_clkdm_deny_idle(clkdm);
+
+		clkdm_clear_all_wkdeps(clkdm);
+		clkdm_clear_all_sleepdeps(clkdm);
 	}
 }
 
@@ -592,6 +506,9 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 		if (!omap_chip_is(cd->omap_chip))
 			continue;
 
+		if (!cd->clkdm && cd->clkdm_name)
+			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
 		/* PRM accesses are slow, so minimize them */
 		mask |= 1 << cd->clkdm->dep_bit;
 		atomic_set(&cd->wkdep_usecount, 0);
@@ -752,6 +669,9 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
 		if (!omap_chip_is(cd->omap_chip))
 			continue;
 
+		if (!cd->clkdm && cd->clkdm_name)
+			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
 		/* PRM accesses are slow, so minimize them */
 		mask |= 1 << cd->clkdm->dep_bit;
 		atomic_set(&cd->sleepdep_usecount, 0);

arch/arm/mach-omap2/cpuidle34xx.c

@@ -60,7 +60,8 @@ struct omap3_processor_cx {
 
 struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
 struct omap3_processor_cx current_cx_state;
-struct powerdomain *mpu_pd, *core_pd;
+struct powerdomain *mpu_pd, *core_pd, *per_pd;
+struct powerdomain *cam_pd;
 
 /*
  * The latencies/thresholds for various C states have
@@ -233,14 +234,62 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 			       struct cpuidle_state *state)
 {
 	struct cpuidle_state *new_state = next_valid_state(dev, state);
+	u32 core_next_state, per_next_state = 0, per_saved_state = 0;
+	u32 cam_state;
+	struct omap3_processor_cx *cx;
+	int ret;
 
 	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
 		BUG_ON(!dev->safe_state);
 		new_state = dev->safe_state;
+		goto select_state;
+	}
+
+	cx = cpuidle_get_statedata(state);
+	core_next_state = cx->core_state;
+
+	/*
+	 * FIXME: we currently manage device-specific idle states
+	 *        for PER and CORE in combination with CPU-specific
+	 *        idle states.  This is wrong, and device-specific
+	 *        idle managment needs to be separated out into 
+	 *        its own code.
+	 */
+
+	/*
+	 * Prevent idle completely if CAM is active.
+	 * CAM does not have wakeup capability in OMAP3.
+	 */
+	cam_state = pwrdm_read_pwrst(cam_pd);
+	if (cam_state == PWRDM_POWER_ON) {
+		new_state = dev->safe_state;
+		goto select_state;
+	}
+
+	/*
+	 * Prevent PER off if CORE is not in retention or off as this
+	 * would disable PER wakeups completely.
+	 */
+	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
+	if ((per_next_state == PWRDM_POWER_OFF) &&
+	    (core_next_state > PWRDM_POWER_RET)) {
+		per_next_state = PWRDM_POWER_RET;
+		pwrdm_set_next_pwrst(per_pd, per_next_state);
 	}
 
+	/* Are we changing PER target state? */
+	if (per_next_state != per_saved_state)
+		pwrdm_set_next_pwrst(per_pd, per_next_state);
+
+select_state:
 	dev->last_state = new_state;
-	return omap3_enter_idle(dev, new_state);
+	ret = omap3_enter_idle(dev, new_state);
+
+	/* Restore original PER state if it was modified */
+	if (per_next_state != per_saved_state)
+		pwrdm_set_next_pwrst(per_pd, per_saved_state);
+
+	return ret;
 }
 
 DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
@@ -328,7 +377,8 @@ void omap_init_power_states(void)
 			cpuidle_params_table[OMAP3_STATE_C2].threshold;
 	omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
-	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
+	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C3 . MPU CSWR + Core inactive */
 	omap3_power_states[OMAP3_STATE_C3].valid =
@@ -426,6 +476,8 @@ int __init omap3_idle_init(void)
 
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	core_pd = pwrdm_lookup("core_pwrdm");
+	per_pd = pwrdm_lookup("per_pwrdm");
+	cam_pd = pwrdm_lookup("cam_pwrdm");
 
 	omap_init_power_states();
 	cpuidle_register_driver(&omap3_idle_driver);

arch/arm/mach-omap2/io.c

@@ -323,6 +323,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		omap2430_hwmod_init();
 	else if (cpu_is_omap34xx())
 		omap3xxx_hwmod_init();
+	else if (cpu_is_omap44xx())
+		omap44xx_hwmod_init();
+
 	/* The OPP tables have to be registered before a clk init */
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 
@@ -342,9 +345,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 #ifndef CONFIG_PM_RUNTIME
 	skip_setup_idle = 1;
 #endif
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())   /* FIXME: OMAP4 */
-		omap_hwmod_late_init(skip_setup_idle);
-
+	omap_hwmod_late_init(skip_setup_idle);
 	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();

arch/arm/mach-omap2/pm-debug.c

@@ -31,12 +31,17 @@
 #include <plat/board.h>
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
+#include <plat/dmtimer.h>
 
 #include "prm.h"
 #include "cm.h"
 #include "pm.h"
 
 int omap2_pm_debug;
+u32 enable_off_mode;
+u32 sleep_while_idle;
+u32 wakeup_timer_seconds;
+u32 wakeup_timer_milliseconds;
 
 #define DUMP_PRM_MOD_REG(mod, reg)    \
 	regs[reg_count].name = #mod "." #reg; \
@@ -349,6 +354,23 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
 	pwrdm->timer = t;
 }
 
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds && !milliseconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
+}
+
 static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
 {
 	struct seq_file *s = (struct seq_file *)user;
@@ -494,8 +516,10 @@ int pm_dbg_regset_init(int reg_set)
 
 static int pwrdm_suspend_get(void *data, u64 *val)
 {
-	int ret;
-	ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+	int ret = -EINVAL;
+
+	if (cpu_is_omap34xx())
+		ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
 	*val = ret;
 
 	if (ret >= 0)
@@ -505,7 +529,10 @@ static int pwrdm_suspend_get(void *data, u64 *val)
 
 static int pwrdm_suspend_set(void *data, u64 val)
 {
-	return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val);
+	if (cpu_is_omap34xx())
+		return omap3_pm_set_suspend_state(
+			(struct powerdomain *)data, (int)val);
+	return -EINVAL;
 }
 
 DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
@@ -553,8 +580,10 @@ static int option_set(void *data, u64 val)
 
 	*option = val;
 
-	if (option == &enable_off_mode)
-		omap3_pm_off_mode_enable(val);
+	if (option == &enable_off_mode) {
+		if (cpu_is_omap34xx())
+			omap3_pm_off_mode_enable(val);
+	}
 
 	return 0;
 }
@@ -609,6 +638,9 @@ static int __init pm_dbg_init(void)
 				   &sleep_while_idle, &pm_dbg_option_fops);
 	(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
 				   &wakeup_timer_seconds, &pm_dbg_option_fops);
+	(void) debugfs_create_file("wakeup_timer_milliseconds",
+			S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds,
+			&pm_dbg_option_fops);
 	pm_dbg_init_done = 1;
 
 	return 0;

arch/arm/mach-omap2/pm.c

@@ -18,11 +18,15 @@
 #include <plat/omap_device.h>
 #include <plat/common.h>
 
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
+
 static struct omap_device_pm_latency *pm_lats;
 
 static struct device *mpu_dev;
-static struct device *dsp_dev;
+static struct device *iva_dev;
 static struct device *l3_dev;
+static struct device *dsp_dev;
 
 struct device *omap2_get_mpuss_device(void)
 {
@@ -30,10 +34,10 @@ struct device *omap2_get_mpuss_device(void)
 	return mpu_dev;
 }
 
-struct device *omap2_get_dsp_device(void)
+struct device *omap2_get_iva_device(void)
 {
-	WARN_ON_ONCE(!dsp_dev);
-	return dsp_dev;
+	WARN_ON_ONCE(!iva_dev);
+	return iva_dev;
 }
 
 struct device *omap2_get_l3_device(void)
@@ -42,6 +46,13 @@ struct device *omap2_get_l3_device(void)
 	return l3_dev;
 }
 
+struct device *omap4_get_dsp_device(void)
+{
+	WARN_ON_ONCE(!dsp_dev);
+	return dsp_dev;
+}
+EXPORT_SYMBOL(omap4_get_dsp_device);
+
 /* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
 static int _init_omap_device(char *name, struct device **new_dev)
 {
@@ -69,8 +80,60 @@ static int _init_omap_device(char *name, struct device **new_dev)
 static void omap2_init_processor_devices(void)
 {
 	_init_omap_device("mpu", &mpu_dev);
-	_init_omap_device("iva", &dsp_dev);
-	_init_omap_device("l3_main", &l3_dev);
+	_init_omap_device("iva", &iva_dev);
+	if (cpu_is_omap44xx()) {
+		_init_omap_device("l3_main_1", &l3_dev);
+		_init_omap_device("dsp", &dsp_dev);
+	} else {
+		_init_omap_device("l3_main", &l3_dev);
+	}
+}
+
+/*
+ * This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled.
+ */
+int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+	u32 cur_state;
+	int sleep_switch = 0;
+	int ret = 0;
+
+	if (pwrdm == NULL || IS_ERR(pwrdm))
+		return -EINVAL;
+
+	while (!(pwrdm->pwrsts & (1 << state))) {
+		if (state == PWRDM_POWER_OFF)
+			return ret;
+		state--;
+	}
+
+	cur_state = pwrdm_read_next_pwrst(pwrdm);
+	if (cur_state == state)
+		return ret;
+
+	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+		sleep_switch = 1;
+		pwrdm_wait_transition(pwrdm);
+	}
+
+	ret = pwrdm_set_next_pwrst(pwrdm, state);
+	if (ret) {
+		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+		       pwrdm->name);
+		goto err;
+	}
+
+	if (sleep_switch) {
+		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		pwrdm_wait_transition(pwrdm);
+		pwrdm_state_switch(pwrdm);
+	}
+
+err:
+	return ret;
 }
 
 static int __init omap2_common_pm_init(void)

arch/arm/mach-omap2/pm.h

@@ -20,7 +20,7 @@ extern void *omap3_secure_ram_storage;
 extern void omap3_pm_off_mode_enable(int);
 extern void omap_sram_idle(void);
 extern int omap3_can_sleep(void);
-extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
+extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
 extern int omap3_idle_init(void);
 
 struct cpuidle_params {
@@ -48,9 +48,11 @@ extern struct omap_dm_timer *gptimer_wakeup;
 
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
 extern int omap2_pm_debug;
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_wakeup_on_timer(seconds, milliseconds)	do {} while (0);
 #define omap2_pm_debug				0
 #endif
 

arch/arm/mach-omap2/pm34xx.c

@@ -38,7 +38,6 @@
 #include <plat/prcm.h>
 #include <plat/gpmc.h>
 #include <plat/dma.h>
-#include <plat/dmtimer.h>
 
 #include <asm/tlbflush.h>
 
@@ -55,11 +54,6 @@
 #define OMAP343X_TABLE_VALUE_OFFSET	   0x30
 #define OMAP343X_CONTROL_REG_VALUE_OFFSET  0x32
 
-u32 enable_off_mode;
-u32 sleep_while_idle;
-u32 wakeup_timer_seconds;
-u32 wakeup_timer_milliseconds;
-
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
@@ -351,7 +345,6 @@ void omap_sram_idle(void)
 	int core_next_state = PWRDM_POWER_ON;
 	int core_prev_state, per_prev_state;
 	u32 sdrc_pwr = 0;
-	int per_state_modified = 0;
 
 	if (!_omap_sram_idle)
 		return;
@@ -385,9 +378,9 @@ void omap_sram_idle(void)
 	/* Enable IO-PAD and IO-CHAIN wakeups */
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
-	if (omap3_has_io_wakeup() && \
-			(per_next_state < PWRDM_POWER_ON ||
-			core_next_state < PWRDM_POWER_ON)) {
+	if (omap3_has_io_wakeup() &&
+	    (per_next_state < PWRDM_POWER_ON ||
+	     core_next_state < PWRDM_POWER_ON)) {
 		prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_enable_io_chain();
 	}
@@ -396,19 +389,10 @@ void omap_sram_idle(void)
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
 		omap2_gpio_prepare_for_idle(per_next_state);
-		if (per_next_state == PWRDM_POWER_OFF) {
-			if (core_next_state == PWRDM_POWER_ON) {
-				per_next_state = PWRDM_POWER_RET;
-				pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
-				per_state_modified = 1;
-			} else
+		if (per_next_state == PWRDM_POWER_OFF)
 				omap3_per_save_context();
-		}
 	}
 
-	if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON)
-		omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]);
-
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(0);
@@ -475,8 +459,6 @@ void omap_sram_idle(void)
 		if (per_prev_state == PWRDM_POWER_OFF)
 			omap3_per_restore_context();
 		omap_uart_resume_idle(2);
-		if (per_state_modified)
-			pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -501,51 +483,6 @@ int omap3_can_sleep(void)
 	return 1;
 }
 
-/* This sets pwrdm state (other than mpu & core. Currently only ON &
- * RET are supported. Function is assuming that clkdm doesn't have
- * hw_sup mode enabled. */
-int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
-{
-	u32 cur_state;
-	int sleep_switch = 0;
-	int ret = 0;
-
-	if (pwrdm == NULL || IS_ERR(pwrdm))
-		return -EINVAL;
-
-	while (!(pwrdm->pwrsts & (1 << state))) {
-		if (state == PWRDM_POWER_OFF)
-			return ret;
-		state--;
-	}
-
-	cur_state = pwrdm_read_next_pwrst(pwrdm);
-	if (cur_state == state)
-		return ret;
-
-	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
-		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
-		sleep_switch = 1;
-		pwrdm_wait_transition(pwrdm);
-	}
-
-	ret = pwrdm_set_next_pwrst(pwrdm, state);
-	if (ret) {
-		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
-		       pwrdm->name);
-		goto err;
-	}
-
-	if (sleep_switch) {
-		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
-		pwrdm_wait_transition(pwrdm);
-		pwrdm_state_switch(pwrdm);
-	}
-
-err:
-	return ret;
-}
-
 static void omap3_pm_idle(void)
 {
 	local_irq_disable();
@@ -567,23 +504,6 @@ static void omap3_pm_idle(void)
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
-static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -604,7 +524,7 @@ static int omap3_pm_suspend(void)
 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
 	/* Set ones wanted by suspend */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+		if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
 			goto restore;
 		if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
 			goto restore;
@@ -625,7 +545,7 @@ static int omap3_pm_suspend(void)
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
-		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
 		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
@@ -974,7 +894,7 @@ void omap3_pm_off_mode_enable(int enable)
 
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		pwrst->next_state = state;
-		set_pwrdm_state(pwrst->pwrdm, state);
+		omap_set_pwrdm_state(pwrst->pwrdm, state);
 	}
 }
 
@@ -1019,7 +939,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 	if (pwrdm_has_hdwr_sar(pwrdm))
 		pwrdm_enable_hdwr_sar(pwrdm);
 
-	return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
 }
 
 /*
@@ -1029,9 +949,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  */
 static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
-	clkdm_clear_all_wkdeps(clkdm);
-	clkdm_clear_all_sleepdeps(clkdm);
-
 	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
 		omap2_clkdm_allow_idle(clkdm);
 	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&

arch/arm/plat-omap/Makefile

@@ -31,4 +31,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
 
-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o

arch/arm/plat-omap/gpio.c

@@ -2085,8 +2085,9 @@ void omap2_gpio_prepare_for_idle(int power_state)
 	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
 		u32 l1, l2;
+		int j;
 
-		if (bank->dbck_enable_mask)
+		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
 			clk_disable(bank->dbck);
 
 		if (power_state > PWRDM_POWER_OFF)
@@ -2152,8 +2153,9 @@ void omap2_gpio_resume_after_idle(void)
 	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
 		u32 l, gen, gen0, gen1;
+		int j;
 
-		if (bank->dbck_enable_mask)
+		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
 			clk_enable(bank->dbck);
 
 		if (!workaround_enabled)

arch/arm/plat-omap/include/plat/common.h

@@ -91,7 +91,8 @@ void omap3_map_io(void);
 })
 
 extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_dsp_device(void);
+extern struct device *omap2_get_iva_device(void);
 extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
 
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */

arch/arm/plat-omap/include/plat/omap_device.h

@@ -36,6 +36,8 @@
 
 #include <plat/omap_hwmod.h>
 
+extern struct device omap_device_parent;
+
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0
 #define OMAP_DEVICE_STATE_ENABLED	1
@@ -62,7 +64,6 @@
  *
  */
 struct omap_device {
-	u32                             magic;
 	struct platform_device		pdev;
 	struct omap_hwmod		**hwmods;
 	struct omap_device_pm_latency	*pm_lats;
@@ -82,7 +83,6 @@ int omap_device_shutdown(struct platform_device *pdev);
 
 /* Core code interface */
 
-bool omap_device_is_valid(struct omap_device *od);
 int omap_device_count_resources(struct omap_device *od);
 int omap_device_fill_resources(struct omap_device *od, struct resource *res);
 

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -561,5 +561,6 @@ int omap_hwmod_for_each_by_class(const char *classname,
 extern int omap2420_hwmod_init(void);
 extern int omap2430_hwmod_init(void);
 extern int omap3xxx_hwmod_init(void);
+extern int omap44xx_hwmod_init(void);
 
 #endif

arch/arm/plat-omap/omap_device.c

@@ -91,12 +91,6 @@
 #define USE_WAKEUP_LAT			0
 #define IGNORE_WAKEUP_LAT		1
 
-/*
- * OMAP_DEVICE_MAGIC: used to determine whether a struct omap_device
- * obtained via container_of() is in fact a struct omap_device
- */
-#define OMAP_DEVICE_MAGIC		 0xf00dcafe
-
 /* Private functions */
 
 /**
@@ -453,8 +447,6 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 	od->pm_lats = pm_lats;
 	od->pm_lats_cnt = pm_lats_cnt;
 
-	od->magic = OMAP_DEVICE_MAGIC;
-
 	if (is_early_device)
 		ret = omap_early_device_register(od);
 	else
@@ -514,6 +506,7 @@ int omap_device_register(struct omap_device *od)
 {
 	pr_debug("omap_device: %s: registering\n", od->pdev.name);
 
+	od->pdev.dev.parent = &omap_device_parent;
 	return platform_device_register(&od->pdev);
 }
 
@@ -667,18 +660,6 @@ int omap_device_align_pm_lat(struct platform_device *pdev,
 	return ret;
 }
 
-/**
- * omap_device_is_valid - Check if pointer is a valid omap_device
- * @od: struct omap_device *
- *
- * Return whether struct omap_device pointer @od points to a valid
- * omap_device.
- */
-bool omap_device_is_valid(struct omap_device *od)
-{
-	return (od && od->magic == OMAP_DEVICE_MAGIC);
-}
-
 /**
  * omap_device_get_pwrdm - return the powerdomain * associated with @od
  * @od: struct omap_device *
@@ -798,3 +779,14 @@ int omap_device_enable_clocks(struct omap_device *od)
 	/* XXX pass along return value here? */
 	return 0;
 }
+
+struct device omap_device_parent = {
+	.init_name	= "omap",
+	.parent         = &platform_bus,
+};
+
+static int __init omap_device_init(void)
+{
+	return device_register(&omap_device_parent);
+}
+core_initcall(omap_device_init);