arm64: dts: armada-3720-turris-mox: convert usb-phy to phy-supply

Update Turris Mox device tree to use the phy-supply property of the
generic PHY framework instead of the legacy usb-phy property.

This is needed since it caused a regression on Turris Mox since "usb:
host: xhci-plat: Prevent an abnormally restrictive PHY init skipping".
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Fixes: eb6c2eb6 ("usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts

@@ -60,11 +60,6 @@ exp_usb3_vbus: usb3-vbus {
 		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb3_phy: usb3-phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&exp_usb3_vbus>;
-	};
-
 	vsdc_reg: vsdc-reg {
 		compatible = "regulator-gpio";
 		regulator-name = "vsdc";
@@ -255,10 +250,16 @@ &usb2 {
 	status = "okay";
 };
 
+&comphy2 {
+	connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&exp_usb3_vbus>;
+	};
+};
+
 &usb3 {
 	status = "okay";
 	phys = <&comphy2 0>;
-	usb-phy = <&usb3_phy>;
 };
 
 &mdio {