Commit 18c88662 authored by Philippe CORNU's avatar Philippe CORNU Committed by Alexandre Torgue

ARM: dts: stm32: Add display support on stm32f469-disco

Add display support on the stm32f469-disco board.
Signed-off-by: default avatarPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@st.com>
parent c5931d9e
...@@ -46,7 +46,7 @@ ...@@ -46,7 +46,7 @@
*/ */
/dts-v1/; /dts-v1/;
#include "stm32f429.dtsi" #include "stm32f469.dtsi"
#include "stm32f469-pinctrl.dtsi" #include "stm32f469-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h> #include <dt-bindings/input/input.h>
...@@ -126,6 +126,55 @@ &clk_hse { ...@@ -126,6 +126,55 @@ &clk_hse {
clock-frequency = <8000000>; clock-frequency = <8000000>;
}; };
&dsi {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi_in: endpoint {
remote-endpoint = <&ltdc_out_dsi>;
};
};
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&dsi_panel_in>;
};
};
};
panel-dsi@0 {
compatible = "orisetech,otm8009a";
reg = <0>; /* dsi virtual channel (0..3) */
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
status = "okay";
port {
dsi_panel_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
};
};
&ltdc {
dma-ranges;
status = "okay";
port {
ltdc_out_dsi: endpoint@0 {
remote-endpoint = <&dsi_in>;
};
};
};
&rtc { &rtc {
status = "okay"; status = "okay";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment