Commit 196ba662 authored by Deepak Ukey's avatar Deepak Ukey Committed by Martin K. Petersen

scsi: pm80xx: Fixed kernel panic during error recovery for SATA drive

Disabling the SATA drive interface cause kernel panic. When the drive
Interface is disabled, device should be deregistered after aborting all
pending I/Os. Also changed the port recovery timeout to 10000 ms for
PM8006 controller.
Signed-off-by: default avatarDeepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: default avatarViswas G <Viswas.G@microchip.com>
Reviewed-by: default avatarJack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 9b79ee97
......@@ -888,6 +888,8 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
dev, 1, 0);
while (pm8001_dev->running_req)
msleep(20);
spin_lock_irqsave(&pm8001_ha->lock, flags);
}
PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
......@@ -1256,8 +1258,10 @@ int pm8001_abort_task(struct sas_task *task)
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("Waiting for Port reset\n"));
wait_for_completion(&completion_reset);
if (phy->port_reset_status)
if (phy->port_reset_status) {
pm8001_dev_gone_notify(dev);
goto out;
}
/*
* 4. SATA Abort ALL
......
......@@ -604,7 +604,7 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &=
0x0000ffff;
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |=
0x140000;
CHIP_8006_PORT_RECOVERY_TIMEOUT;
}
pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
......
......@@ -230,6 +230,8 @@
#define SAS_MAX_AIP 0x200000
#define IT_NEXUS_TIMEOUT 0x7D0
#define PORT_RECOVERY_TIMEOUT ((IT_NEXUS_TIMEOUT/100) + 30)
/* Port recovery timeout, 10000 ms for PM8006 controller */
#define CHIP_8006_PORT_RECOVERY_TIMEOUT 0x640000
#ifdef __LITTLE_ENDIAN_BITFIELD
struct sas_identify_frame_local {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment