V4L/DVB (11770): cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1255

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Documentation/video4linux/CARDLIST.cx23885

@@ -18,3 +18,4 @@
  17 -> NetUP Dual DVB-S2 CI                                [1b55:2a2c]
  18 -> Hauppauge WinTV-HVR1270                             [0070:2211]
  19 -> Hauppauge WinTV-HVR1275                             [0070:2215]
+ 20 -> Hauppauge WinTV-HVR1255                             [0070:2251]

drivers/media/video/cx23885/cx23885-cards.c

@@ -189,6 +189,10 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Hauppauge WinTV-HVR1275",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
+		.name		= "Hauppauge WinTV-HVR1255",
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -296,6 +300,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x2215,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2251,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -637,6 +645,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 		/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
 		/* GPIO-6 I2C Gate which can isolate the 3305 from the bus */
 		/* GPIO-9 LG3305 reset */
@@ -662,6 +671,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 		/* FIXME: Implement me */
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
@@ -699,6 +709,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;
@@ -758,6 +769,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */

drivers/media/video/cx23885/cx23885-dvb.c

@@ -197,6 +197,16 @@ static struct s5h1411_config dvico_s5h1411_config = {
 	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 };
 
+static struct s5h1411_config hcw_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.vsb_if        = S5H1411_IF_44000,
+	.qam_if        = S5H1411_IF_4000,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
 static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
 	.i2c_address      = 0x61,
 	.if_khz           = 5380,
@@ -433,6 +443,17 @@ static int dvb_register(struct cx23885_tsport *port)
 				   &hcw_lgdt3305_tda18271_config);
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+					       &hcw_s5h1411_config,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_bus[1].i2c_adap,
+				   &hauppauge_tda18271_config);
+		}
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 		i2c_bus = &dev->i2c_bus[0];
 		switch (alt_tuner) {

drivers/media/video/cx23885/cx23885.h

@@ -73,6 +73,7 @@
 #define CX23885_BOARD_NETUP_DUAL_DVBS2_CI      17
 #define CX23885_BOARD_HAUPPAUGE_HVR1270        18
 #define CX23885_BOARD_HAUPPAUGE_HVR1275        19
+#define CX23885_BOARD_HAUPPAUGE_HVR1255        20
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002