Merge tag 'fbdev-3.11-2' of git://gitorious.org/linux-omap-dss2/linux into fbdev/for-next

Various fbdev changes for 3.11

* xilinxfb updates
* Small cleanups and fixes to multiple drivers

drivers/video/Kconfig

@@ -2188,7 +2188,7 @@ config FB_PS3_DEFAULT_SIZE_M
 
 config FB_XILINX
 	tristate "Xilinx frame buffer support"
-	depends on FB && (XILINX_VIRTEX || MICROBLAZE)
+	depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT

drivers/video/aty/aty128fb.c

@@ -2016,7 +2016,7 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	aty128_init_engine(par);
 
-	par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
+	par->pm_reg = pdev->pm_cap;
 	par->pdev = pdev;
 	par->asleep = 0;
 	par->lock_blank = 0;

drivers/video/aty/atyfb_base.c

@@ -58,6 +58,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
+#include <linux/compiler.h>
 #include <linux/console.h>
 #include <linux/fb.h>
 #include <linux/init.h>
@@ -434,8 +435,8 @@ static int correct_chipset(struct atyfb_par *par)
 	const char *name;
 	int i;
 
-	for (i = ARRAY_SIZE(aty_chips) - 1; i >= 0; i--)
-		if (par->pci_id == aty_chips[i].pci_id)
+	for (i = ARRAY_SIZE(aty_chips); i > 0; i--)
+		if (par->pci_id == aty_chips[i - 1].pci_id)
 			break;
 
 	if (i < 0)
@@ -531,8 +532,8 @@ static int correct_chipset(struct atyfb_par *par)
 	return 0;
 }
 
-static char ram_dram[] = "DRAM";
-static char ram_resv[] = "RESV";
+static char ram_dram[] __maybe_unused = "DRAM";
+static char ram_resv[] __maybe_unused = "RESV";
 #ifdef CONFIG_FB_ATY_GX
 static char ram_vram[] = "VRAM";
 #endif /* CONFIG_FB_ATY_GX */

drivers/video/aty/radeon_pm.c

@@ -2805,7 +2805,7 @@ static void radeonfb_early_resume(void *data)
 void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep)
 {
 	/* Find PM registers in config space if any*/
-	rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM);
+	rinfo->pm_reg = rinfo->pdev->pm_cap;
 
 	/* Enable/Disable dynamic clocks: TODO add sysfs access */
 	if (rinfo->family == CHIP_FAMILY_RS480)

drivers/video/au1100fb.c

@@ -579,7 +579,6 @@ static int au1100fb_drv_probe(struct platform_device *dev)
 	if (fbdev->info.cmap.len != 0) {
 		fb_dealloc_cmap(&fbdev->info.cmap);
 	}
-	platform_set_drvdata(dev, NULL);
 
 	return -ENODEV;
 }

drivers/video/bf54x-lq043fb.c

@@ -681,7 +681,6 @@ static int bfin_bf54x_probe(struct platform_device *pdev)
 out2:
 	free_dma(CH_EPPI0);
 out1:
-	platform_set_drvdata(pdev, NULL);
 
 	return ret;
 }

drivers/video/bfin-lq035q1-fb.c

@@ -170,16 +170,19 @@ static int lq035q1_spidev_remove(struct spi_device *spi)
 	return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
 }
 
-#ifdef CONFIG_PM
-static int lq035q1_spidev_suspend(struct spi_device *spi, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int lq035q1_spidev_suspend(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
+
 	return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
 }
 
-static int lq035q1_spidev_resume(struct spi_device *spi)
+static int lq035q1_spidev_resume(struct device *dev)
 {
-	int ret;
+	struct spi_device *spi = to_spi_device(dev);
 	struct spi_control *ctl = spi_get_drvdata(spi);
+	int ret;
 
 	ret = lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode);
 	if (ret)
@@ -187,9 +190,13 @@ static int lq035q1_spidev_resume(struct spi_device *spi)
 
 	return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON);
 }
+
+static SIMPLE_DEV_PM_OPS(lq035q1_spidev_pm_ops, lq035q1_spidev_suspend,
+	lq035q1_spidev_resume);
+#define LQ035Q1_SPIDEV_PM_OPS (&lq035q1_spidev_pm_ops)
+
 #else
-# define lq035q1_spidev_suspend NULL
-# define lq035q1_spidev_resume  NULL
+#define LQ035Q1_SPIDEV_PM_OPS NULL
 #endif
 
 /* Power down all displays on reboot, poweroff or halt */
@@ -708,8 +715,7 @@ static int bfin_lq035q1_probe(struct platform_device *pdev)
 	info->spidrv.probe    = lq035q1_spidev_probe;
 	info->spidrv.remove   = lq035q1_spidev_remove;
 	info->spidrv.shutdown = lq035q1_spidev_shutdown;
-	info->spidrv.suspend  = lq035q1_spidev_suspend;
-	info->spidrv.resume   = lq035q1_spidev_resume;
+	info->spidrv.driver.pm = LQ035Q1_SPIDEV_PM_OPS;
 
 	ret = spi_register_driver(&info->spidrv);
 	if (ret < 0) {
@@ -759,7 +765,6 @@ static int bfin_lq035q1_probe(struct platform_device *pdev)
  out2:
 	free_dma(CH_PPI);
  out1:
-	platform_set_drvdata(pdev, NULL);
 
 	return ret;
 }
@@ -788,7 +793,6 @@ static int bfin_lq035q1_remove(struct platform_device *pdev)
 	bfin_lq035q1_free_ports(info->disp_info->ppi_mode ==
 				USE_RGB565_16_BIT_PPI);
 
-	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(fbinfo);
 
 	dev_info(&pdev->dev, "unregistered LCD driver\n");

drivers/video/bfin-t350mcqb-fb.c

@@ -578,7 +578,6 @@ static int bfin_t350mcqb_probe(struct platform_device *pdev)
 out2:
 	free_dma(CH_PPI);
 out1:
-	platform_set_drvdata(pdev, NULL);
 
 	return ret;
 }
@@ -608,7 +607,6 @@ static int bfin_t350mcqb_remove(struct platform_device *pdev)
 
 	bfin_t350mcqb_request_ports(0);
 
-	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(fbinfo);
 
 	printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n");

drivers/video/ep93xx-fb.c

@@ -595,7 +595,6 @@ static int ep93xxfb_probe(struct platform_device *pdev)
 	fb_dealloc_cmap(&info->cmap);
 failed_cmap:
 	kfree(info);
-	platform_set_drvdata(pdev, NULL);
 
 	return err;
 }
@@ -614,7 +613,6 @@ static int ep93xxfb_remove(struct platform_device *pdev)
 		fbi->mach_info->teardown(pdev);
 
 	kfree(info);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/video/fbmem.c

@@ -1305,7 +1305,9 @@ static int do_fscreeninfo_to_user(struct fb_fix_screeninfo *fix,
 	err |= copy_to_user(fix32->reserved, fix->reserved,
 			    sizeof(fix->reserved));
 
-	return err;
+	if (err)
+		return -EFAULT;
+	return 0;
 }
 
 static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd,

drivers/video/fsl-diu-fb.c

@@ -469,7 +469,7 @@ static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
 	unsigned long val;
 
 	if (s) {
-		if (!strict_strtoul(s, 10, &val) && (val <= 2))
+		if (!kstrtoul(s, 10, &val) && (val <= 2))
 			port = (enum fsl_diu_monitor_port) val;
 		else if (strncmp(s, "lvds", 4) == 0)
 			port = FSL_DIU_PORT_LVDS;
@@ -1853,7 +1853,7 @@ static int __init fsl_diu_setup(char *options)
 		if (!strncmp(opt, "monitor=", 8)) {
 			monitor_port = fsl_diu_name_to_port(opt + 8);
 		} else if (!strncmp(opt, "bpp=", 4)) {
-			if (!strict_strtoul(opt + 4, 10, &val))
+			if (!kstrtoul(opt + 4, 10, &val))
 				default_bpp = val;
 		} else
 			fb_mode = opt;

drivers/video/i740fb.c

@@ -1302,7 +1302,7 @@ static int  __init i740fb_setup(char *options)
 }
 #endif
 
-int __init i740fb_init(void)
+static int __init i740fb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;

drivers/video/imxfb.c

@@ -923,7 +923,6 @@ static int __init imxfb_probe(struct platform_device *pdev)
 failed_req:
 	kfree(info->pseudo_palette);
 failed_init:
-	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(info);
 	return ret;
 }
@@ -955,12 +954,10 @@ static int imxfb_remove(struct platform_device *pdev)
 	iounmap(fbi->regs);
 	release_mem_region(res->start, resource_size(res));
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 
-void  imxfb_shutdown(struct platform_device * dev)
+static void imxfb_shutdown(struct platform_device *dev)
 {
 	struct fb_info *info = platform_get_drvdata(dev);
 	struct imxfb_info *fbi = info->par;
@@ -999,7 +996,7 @@ static int imxfb_setup(void)
 	return 0;
 }
 
-int __init imxfb_init(void)
+static int __init imxfb_init(void)
 {
 	int ret = imxfb_setup();
 

drivers/video/jz4740_fb.c

@@ -737,8 +737,6 @@ static int jzfb_remove(struct platform_device *pdev)
 	fb_dealloc_cmap(&jzfb->fb->cmap);
 	jzfb_free_devmem(jzfb);
 
-	platform_set_drvdata(pdev, NULL);
-
 	framebuffer_release(jzfb->fb);
 
 	return 0;

drivers/video/mmp/fb/mmpfb.c

@@ -659,7 +659,6 @@ static int mmpfb_probe(struct platform_device *pdev)
 	mutex_destroy(&fbi->access_ok);
 failed:
 	dev_err(fbi->dev, "mmp-fb: frame buffer device init failed\n");
-	platform_set_drvdata(pdev, NULL);
 
 	framebuffer_release(info);
 

drivers/video/mmp/hw/mmp_ctrl.c

@@ -566,7 +566,6 @@ static int mmphw_probe(struct platform_device *pdev)
 		devm_kfree(ctrl->dev, ctrl);
 	}
 
-	platform_set_drvdata(pdev, NULL);
 	dev_err(&pdev->dev, "device init failed\n");
 
 	return ret;

drivers/video/mxsfb.c

@@ -899,7 +899,6 @@ static int mxsfb_probe(struct platform_device *pdev)
 
 	host->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(host->base)) {
-		dev_err(&pdev->dev, "ioremap failed\n");
 		ret = PTR_ERR(host->base);
 		goto fb_release;
 	}
@@ -986,8 +985,6 @@ static int mxsfb_remove(struct platform_device *pdev)
 
 	framebuffer_release(fb_info);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/video/nuc900fb.c

@@ -707,7 +707,6 @@ static int nuc900fb_remove(struct platform_device *pdev)
 	release_resource(fbi->mem);
 	kfree(fbi->mem);
 
-	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(fbinfo);
 
 	return 0;

drivers/video/omap2/displays/panel-taal.c

@@ -573,7 +573,7 @@ static ssize_t taal_store_esd_interval(struct device *dev,
 	unsigned long t;
 	int r;
 
-	r = strict_strtoul(buf, 10, &t);
+	r = kstrtoul(buf, 10, &t);
 	if (r)
 		return r;
 
@@ -611,7 +611,7 @@ static ssize_t taal_store_ulps(struct device *dev,
 	unsigned long t;
 	int r;
 
-	r = strict_strtoul(buf, 10, &t);
+	r = kstrtoul(buf, 10, &t);
 	if (r)
 		return r;
 
@@ -660,7 +660,7 @@ static ssize_t taal_store_ulps_timeout(struct device *dev,
 	unsigned long t;
 	int r;
 
-	r = strict_strtoul(buf, 10, &t);
+	r = kstrtoul(buf, 10, &t);
 	if (r)
 		return r;
 

drivers/video/omap2/dss/dpi.c

@@ -131,7 +131,7 @@ static bool dpi_calc_dispc_cb(int lckd, int pckd, unsigned long lck,
 	 * shifted. So skip all odd dividers when the pixel clock is on the
 	 * higher side.
 	 */
-	if (ctx->pck_min >= 1000000) {
+	if (ctx->pck_min >= 100000000) {
 		if (lckd > 1 && lckd % 2 != 0)
 			return false;
 
@@ -158,7 +158,7 @@ static bool dpi_calc_hsdiv_cb(int regm_dispc, unsigned long dispc,
 	 * shifted. So skip all odd dividers when the pixel clock is on the
 	 * higher side.
 	 */
-	if (regm_dispc > 1 && regm_dispc % 2 != 0 && ctx->pck_min >= 1000000)
+	if (regm_dispc > 1 && regm_dispc % 2 != 0 && ctx->pck_min >= 100000000)
 		return false;
 
 	ctx->dsi_cinfo.regm_dispc = regm_dispc;

drivers/video/pxa3xx-gcu.c

@@ -711,7 +711,6 @@ static int pxa3xx_gcu_probe(struct platform_device *dev)
 	misc_deregister(&priv->misc_dev);
 
 err_free_priv:
-	platform_set_drvdata(dev, NULL);
 	free_buffers(dev, priv);
 	kfree(priv);
 	return ret;
@@ -729,7 +728,6 @@ static int pxa3xx_gcu_remove(struct platform_device *dev)
 			priv->shared, priv->shared_phys);
 	iounmap(priv->mmio_base);
 	release_mem_region(r->start, resource_size(r));
-	platform_set_drvdata(dev, NULL);
 	clk_disable(priv->clk);
 	free_buffers(dev, priv);
 	kfree(priv);

drivers/video/pxafb.c

@@ -2256,7 +2256,6 @@ static int pxafb_probe(struct platform_device *dev)
 	release_mem_region(r->start, resource_size(r));
 failed_fbi:
 	clk_put(fbi->clk);
-	platform_set_drvdata(dev, NULL);
 	kfree(fbi);
 failed:
 	return ret;

drivers/video/s3c2410fb.c

@@ -1005,7 +1005,6 @@ static int s3c24xxfb_probe(struct platform_device *pdev,
 release_mem:
 	release_mem_region(res->start, size);
 dealloc_fb:
-	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(fbinfo);
 	return ret;
 }
@@ -1051,7 +1050,6 @@ static int s3c2410fb_remove(struct platform_device *pdev)
 
 	release_mem_region(info->mem->start, resource_size(info->mem));
 
-	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(fbinfo);
 
 	return 0;

drivers/video/sa1100fb.c

@@ -1271,7 +1271,6 @@ static int sa1100fb_probe(struct platform_device *pdev)
  failed:
 	if (fbi)
 		iounmap(fbi->base);
-	platform_set_drvdata(pdev, NULL);
 	kfree(fbi);
 	release_mem_region(res->start, resource_size(res));
 	return ret;

drivers/video/sh7760fb.c

@@ -571,7 +571,6 @@ static int sh7760fb_remove(struct platform_device *dev)
 	iounmap(par->base);
 	release_mem_region(par->ioarea->start, resource_size(par->ioarea));
 	framebuffer_release(info);
-	platform_set_drvdata(dev, NULL);
 
 	return 0;
 }

drivers/video/sh_mipi_dsi.c

@@ -567,7 +567,6 @@ static int sh_mipi_remove(struct platform_device *pdev)
 	iounmap(mipi->base);
 	if (res)
 		release_mem_region(res->start, resource_size(res));
-	platform_set_drvdata(pdev, NULL);
 	kfree(mipi);
 
 	return 0;

drivers/video/smscufx.c

@@ -1622,7 +1622,7 @@ static int ufx_usb_probe(struct usb_interface *interface,
 {
 	struct usb_device *usbdev;
 	struct ufx_data *dev;
-	struct fb_info *info = 0;
+	struct fb_info *info = NULL;
 	int retval = -ENOMEM;
 	u32 id_rev, fpga_rev;
 

drivers/video/tmiofb.c

@@ -794,7 +794,6 @@ static int tmiofb_probe(struct platform_device *dev)
 		cell->disable(dev);
 err_enable:
 err_find_mode:
-	platform_set_drvdata(dev, NULL);
 	free_irq(irq, info);
 err_request_irq:
 	iounmap(info->screen_base);
@@ -823,8 +822,6 @@ static int tmiofb_remove(struct platform_device *dev)
 		if (cell->disable)
 			cell->disable(dev);
 
-		platform_set_drvdata(dev, NULL);
-
 		free_irq(irq, info);
 
 		iounmap(info->screen_base);

drivers/video/udlfb.c

@@ -434,10 +434,10 @@ static void dlfb_compress_hline(
 
 	while ((pixel_end > pixel) &&
 	       (cmd_buffer_end - MIN_RLX_CMD_BYTES > cmd)) {
-		uint8_t *raw_pixels_count_byte = 0;
-		uint8_t *cmd_pixels_count_byte = 0;
-		const uint16_t *raw_pixel_start = 0;
-		const uint16_t *cmd_pixel_start, *cmd_pixel_end = 0;
+		uint8_t *raw_pixels_count_byte = NULL;
+		uint8_t *cmd_pixels_count_byte = NULL;
+		const uint16_t *raw_pixel_start = NULL;
+		const uint16_t *cmd_pixel_start, *cmd_pixel_end = NULL;
 
 		prefetchw((void *) cmd); /* pull in one cache line at least */
 
@@ -573,7 +573,7 @@ static int dlfb_render_hline(struct dlfb_data *dev, struct urb **urb_ptr,
 	return 0;
 }
 
-int dlfb_handle_damage(struct dlfb_data *dev, int x, int y,
+static int dlfb_handle_damage(struct dlfb_data *dev, int x, int y,
 	       int width, int height, char *data)
 {
 	int i, ret;
@@ -1588,7 +1588,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 			const struct usb_device_id *id)
 {
 	struct usb_device *usbdev;
-	struct dlfb_data *dev = 0;
+	struct dlfb_data *dev = NULL;
 	int retval = -ENOMEM;
 
 	/* usb initialization */

drivers/video/uvesafb.c

@@ -819,8 +819,8 @@ static int uvesafb_vbe_init(struct fb_info *info)
 	if (par->pmi_setpal || par->ypan) {
 		if (__supported_pte_mask & _PAGE_NX) {
 			par->pmi_setpal = par->ypan = 0;
-			printk(KERN_WARNING "uvesafb: NX protection is actively."
-				"We have better not to use the PMI.\n");
+			printk(KERN_WARNING "uvesafb: NX protection is active, "
+					    "better not use the PMI.\n");
 		} else {
 			uvesafb_vbe_getpmi(task, par);
 		}

drivers/video/vga16fb.c

@@ -1269,7 +1269,6 @@ static void vga16fb_destroy(struct fb_info *info)
 	iounmap(info->screen_base);
 	fb_dealloc_cmap(&info->cmap);
 	/* XXX unshare VGA regions */
-	platform_set_drvdata(dev, NULL);
 	framebuffer_release(info);
 }
 

drivers/video/vt8500lcdfb.c

@@ -448,7 +448,6 @@ static int vt8500lcd_probe(struct platform_device *pdev)
 failed_free_res:
 	release_mem_region(res->start, resource_size(res));
 failed_fbi:
-	platform_set_drvdata(pdev, NULL);
 	kfree(fbi);
 failed:
 	return ret;

drivers/video/wm8505fb.c

@@ -173,7 +173,7 @@ static ssize_t contrast_store(struct device *dev,
 	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
 	unsigned long tmp;
 
-	if (strict_strtoul(buf, 10, &tmp) || (tmp > 0xff))
+	if (kstrtoul(buf, 10, &tmp) || (tmp > 0xff))
 		return -EINVAL;
 	fbi->contrast = tmp;
 

drivers/video/xilinxfb.c

@@ -44,7 +44,7 @@
 
 
 /*
- * Xilinx calls it "PLB TFT LCD Controller" though it can also be used for
+ * Xilinx calls it "TFT LCD Controller" though it can also be used for
  * the VGA port on the Xilinx ML40x board. This is a hardware display
  * controller for a 640x480 resolution TFT or VGA screen.
  *
@@ -54,11 +54,11 @@
  * don't start thinking about scrolling).  The second allows the LCD to
  * be turned on or off as well as rotated 180 degrees.
  *
- * In case of direct PLB access the second control register will be at
+ * In case of direct BUS access the second control register will be at
  * an offset of 4 as compared to the DCR access where the offset is 1
  * i.e. REG_CTRL. So this is taken care in the function
- * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
- * direct PLB access.
+ * xilinx_fb_out32 where it left shifts the offset 2 times in case of
+ * direct BUS access.
  */
 #define NUM_REGS	2
 #define REG_FB_ADDR	0
@@ -116,7 +116,8 @@ static struct fb_var_screeninfo xilinx_fb_var = {
 };
 
 
-#define PLB_ACCESS_FLAG	0x1		/* 1 = PLB, 0 = DCR */
+#define BUS_ACCESS_FLAG		0x1 /* 1 = BUS, 0 = DCR */
+#define LITTLE_ENDIAN_ACCESS	0x2 /* LITTLE ENDIAN IO functions */
 
 struct xilinxfb_drvdata {
 
@@ -146,21 +147,40 @@ struct xilinxfb_drvdata {
 	container_of(_info, struct xilinxfb_drvdata, info)
 
 /*
- * The XPS TFT Controller can be accessed through PLB or DCR interface.
+ * The XPS TFT Controller can be accessed through BUS or DCR interface.
  * To perform the read/write on the registers we need to check on
  * which bus its connected and call the appropriate write API.
  */
-static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset,
 				u32 val)
 {
-	if (drvdata->flags & PLB_ACCESS_FLAG)
-		out_be32(drvdata->regs + (offset << 2), val);
+	if (drvdata->flags & BUS_ACCESS_FLAG) {
+		if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
+			iowrite32(val, drvdata->regs + (offset << 2));
+		else
+			iowrite32be(val, drvdata->regs + (offset << 2));
+	}
 #ifdef CONFIG_PPC_DCR
 	else
 		dcr_write(drvdata->dcr_host, offset, val);
 #endif
 }
 
+static u32 xilinx_fb_in32(struct xilinxfb_drvdata *drvdata, u32 offset)
+{
+	if (drvdata->flags & BUS_ACCESS_FLAG) {
+		if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
+			return ioread32(drvdata->regs + (offset << 2));
+		else
+			return ioread32be(drvdata->regs + (offset << 2));
+	}
+#ifdef CONFIG_PPC_DCR
+	else
+		return dcr_read(drvdata->dcr_host, offset);
+#endif
+	return 0;
+}
+
 static int
 xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
 	unsigned transp, struct fb_info *fbi)
@@ -197,7 +217,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
 	switch (blank_mode) {
 	case FB_BLANK_UNBLANK:
 		/* turn on panel */
-		xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+		xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
 		break;
 
 	case FB_BLANK_NORMAL:
@@ -205,7 +225,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
 	case FB_BLANK_HSYNC_SUSPEND:
 	case FB_BLANK_POWERDOWN:
 		/* turn off panel */
-		xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+		xilinx_fb_out32(drvdata, REG_CTRL, 0);
 	default:
 		break;
 
@@ -227,33 +247,23 @@ static struct fb_ops xilinxfb_ops =
  * Bus independent setup/teardown
  */
 
-static int xilinxfb_assign(struct device *dev,
+static int xilinxfb_assign(struct platform_device *pdev,
 			   struct xilinxfb_drvdata *drvdata,
-			   unsigned long physaddr,
 			   struct xilinxfb_platform_data *pdata)
 {
 	int rc;
+	struct device *dev = &pdev->dev;
 	int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
 
-	if (drvdata->flags & PLB_ACCESS_FLAG) {
-		/*
-		 * Map the control registers in if the controller
-		 * is on direct PLB interface.
-		 */
-		if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
-			dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
-				physaddr);
-			rc = -ENODEV;
-			goto err_region;
-		}
+	if (drvdata->flags & BUS_ACCESS_FLAG) {
+		struct resource *res;
 
-		drvdata->regs_phys = physaddr;
-		drvdata->regs = ioremap(physaddr, 8);
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		drvdata->regs_phys = res->start;
+		drvdata->regs = devm_request_and_ioremap(&pdev->dev, res);
 		if (!drvdata->regs) {
-			dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
-				physaddr);
-			rc = -ENODEV;
-			goto err_map;
+			rc = -EADDRNOTAVAIL;
+			goto err_region;
 		}
 	}
 
@@ -270,7 +280,7 @@ static int xilinxfb_assign(struct device *dev,
 	if (!drvdata->fb_virt) {
 		dev_err(dev, "Could not allocate frame buffer memory\n");
 		rc = -ENOMEM;
-		if (drvdata->flags & PLB_ACCESS_FLAG)
+		if (drvdata->flags & BUS_ACCESS_FLAG)
 			goto err_fbmem;
 		else
 			goto err_region;
@@ -280,13 +290,19 @@ static int xilinxfb_assign(struct device *dev,
 	memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize);
 
 	/* Tell the hardware where the frame buffer is */
-	xilinx_fb_out_be32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
+	xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
+	rc = xilinx_fb_in32(drvdata, REG_FB_ADDR);
+	/* Endianess detection */
+	if (rc != drvdata->fb_phys) {
+		drvdata->flags |= LITTLE_ENDIAN_ACCESS;
+		xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
+	}
 
 	/* Turn on the display */
 	drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
 	if (pdata->rotate_screen)
 		drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
-	xilinx_fb_out_be32(drvdata, REG_CTRL,
+	xilinx_fb_out32(drvdata, REG_CTRL,
 					drvdata->reg_ctrl_default);
 
 	/* Fill struct fb_info */
@@ -323,9 +339,9 @@ static int xilinxfb_assign(struct device *dev,
 		goto err_regfb;
 	}
 
-	if (drvdata->flags & PLB_ACCESS_FLAG) {
+	if (drvdata->flags & BUS_ACCESS_FLAG) {
 		/* Put a banner in the log (for DEBUG) */
-		dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr,
+		dev_dbg(dev, "regs: phys=%x, virt=%p\n", drvdata->regs_phys,
 					drvdata->regs);
 	}
 	/* Put a banner in the log (for DEBUG) */
@@ -345,15 +361,11 @@ static int xilinxfb_assign(struct device *dev,
 		iounmap(drvdata->fb_virt);
 
 	/* Turn off the display */
-	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+	xilinx_fb_out32(drvdata, REG_CTRL, 0);
 
 err_fbmem:
-	if (drvdata->flags & PLB_ACCESS_FLAG)
-		iounmap(drvdata->regs);
-
-err_map:
-	if (drvdata->flags & PLB_ACCESS_FLAG)
-		release_mem_region(physaddr, 8);
+	if (drvdata->flags & BUS_ACCESS_FLAG)
+		devm_iounmap(dev, drvdata->regs);
 
 err_region:
 	kfree(drvdata);
@@ -381,13 +393,11 @@ static int xilinxfb_release(struct device *dev)
 		iounmap(drvdata->fb_virt);
 
 	/* Turn off the display */
-	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+	xilinx_fb_out32(drvdata, REG_CTRL, 0);
 
 	/* Release the resources, as allocated based on interface */
-	if (drvdata->flags & PLB_ACCESS_FLAG) {
-		iounmap(drvdata->regs);
-		release_mem_region(drvdata->regs_phys, 8);
-	}
+	if (drvdata->flags & BUS_ACCESS_FLAG)
+		devm_iounmap(dev, drvdata->regs);
 #ifdef CONFIG_PPC_DCR
 	else
 		dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
@@ -406,11 +416,9 @@ static int xilinxfb_release(struct device *dev)
 static int xilinxfb_of_probe(struct platform_device *op)
 {
 	const u32 *prop;
-	u32 *p;
-	u32 tft_access;
+	u32 tft_access = 0;
 	struct xilinxfb_platform_data pdata;
-	struct resource res;
-	int size, rc;
+	int size;
 	struct xilinxfb_drvdata *drvdata;
 
 	/* Copy with the default pdata (not a ptr reference!) */
@@ -424,34 +432,29 @@ static int xilinxfb_of_probe(struct platform_device *op)
 	}
 
 	/*
-	 * To check whether the core is connected directly to DCR or PLB
+	 * To check whether the core is connected directly to DCR or BUS
 	 * interface and initialize the tft_access accordingly.
 	 */
-	p = (u32 *)of_get_property(op->dev.of_node, "xlnx,dcr-splb-slave-if", NULL);
-	tft_access = p ? *p : 0;
+	of_property_read_u32(op->dev.of_node, "xlnx,dcr-splb-slave-if",
+			     &tft_access);
 
 	/*
-	 * Fill the resource structure if its direct PLB interface
+	 * Fill the resource structure if its direct BUS interface
 	 * otherwise fill the dcr_host structure.
 	 */
 	if (tft_access) {
-		drvdata->flags |= PLB_ACCESS_FLAG;
-		rc = of_address_to_resource(op->dev.of_node, 0, &res);
-		if (rc) {
-			dev_err(&op->dev, "invalid address\n");
-			goto err;
-		}
+		drvdata->flags |= BUS_ACCESS_FLAG;
 	}
 #ifdef CONFIG_PPC_DCR
 	else {
 		int start;
-		res.start = 0;
 		start = dcr_resource_start(op->dev.of_node, 0);
 		drvdata->dcr_len = dcr_resource_len(op->dev.of_node, 0);
 		drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
 		if (!DCR_MAP_OK(drvdata->dcr_host)) {
 			dev_err(&op->dev, "invalid DCR address\n");
-			goto err;
+			kfree(drvdata);
+			return -ENODEV;
 		}
 	}
 #endif
@@ -478,11 +481,7 @@ static int xilinxfb_of_probe(struct platform_device *op)
 		pdata.rotate_screen = 1;
 
 	dev_set_drvdata(&op->dev, drvdata);
-	return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
-
- err:
-	kfree(drvdata);
-	return -ENODEV;
+	return xilinxfb_assign(op, drvdata, &pdata);
 }
 
 static int xilinxfb_of_remove(struct platform_device *op)

include/video/of_display_timing.h

@@ -10,6 +10,7 @@
 #define __LINUX_OF_DISPLAY_TIMING_H
 
 struct device_node;
+struct display_timing;
 struct display_timings;
 
 #define OF_USE_NATIVE_MODE -1