clk: clk-gpio: Request GPIO descriptor as LOW

Requesting the GPIOD_OUT_LOW low will make sure the GPIO is
deasserted when requested. The gpiolib core will make sure that
if the GPIO line is active low, it will be logically driven high
when deasserted, see drivers/gpiolib.c gpiod_configure_flags().

Cc: Sergej Sawazki <ce3a@gmx.de>
Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

drivers/clk/clk-gpio.c

@@ -109,14 +109,6 @@ static struct clk_hw *clk_register_gpio(struct device *dev, const char *name,
 	if (!clk_gpio)
 		return ERR_PTR(-ENOMEM);
 
-	/*
-	 * Set to disabled no matter what: NOTE if the GPIO line is active low
-	 * the GPIO descriptor knows this and will set it high to deassert the
-	 * line. This assumes the GPIO descriptor has been requested using
-	 * GPIOD_ASIS by the callers so we need to initialize it as disabled here.
-	 */
-	gpiod_set_value(gpiod, 0);
-
 	init.name = name;
 	init.ops = clk_gpio_ops;
 	init.flags = flags | CLK_IS_BASIC;
@@ -237,7 +229,7 @@ static int gpio_clk_driver_probe(struct platform_device *pdev)
 	is_mux = of_device_is_compatible(node, "gpio-mux-clock");
 
 	gpio_name = is_mux ? "select" : "enable";
-	gpiod = devm_gpiod_get(&pdev->dev, gpio_name, GPIOD_ASIS);
+	gpiod = devm_gpiod_get(&pdev->dev, gpio_name, GPIOD_OUT_LOW);
 	if (IS_ERR(gpiod)) {
 		ret = PTR_ERR(gpiod);
 		if (ret == -EPROBE_DEFER)