Commit 1bb09fb9 authored by Amit Kumar Salecha's avatar Amit Kumar Salecha Committed by David S. Miller

qlcnic: cleanup dma mask setting

Device support 64 bit dma mask.
Signed-off-by: default avatarAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6edae7a4
......@@ -924,7 +924,6 @@ struct qlcnic_adapter {
u8 driver_mismatch;
u8 msix_supported;
u8 rx_csum;
u8 pci_using_dac;
u8 portnum;
u8 physical_port;
......
......@@ -241,66 +241,6 @@ static void qlcnic_clear_stats(struct qlcnic_adapter *adapter)
memset(&adapter->stats, 0, sizeof(adapter->stats));
}
static int qlcnic_set_dma_mask(struct qlcnic_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
u64 mask, cmask;
adapter->pci_using_dac = 0;
mask = DMA_BIT_MASK(39);
cmask = mask;
if (pci_set_dma_mask(pdev, mask) == 0 &&
pci_set_consistent_dma_mask(pdev, cmask) == 0) {
adapter->pci_using_dac = 1;
return 0;
}
return -EIO;
}
/* Update addressable range if firmware supports it */
static int
qlcnic_update_dma_mask(struct qlcnic_adapter *adapter)
{
int change, shift, err;
u64 mask, old_mask, old_cmask;
struct pci_dev *pdev = adapter->pdev;
change = 0;
shift = QLCRD32(adapter, CRB_DMA_SHIFT);
if (shift > 32)
return 0;
if (shift > 9)
change = 1;
if (change) {
old_mask = pdev->dma_mask;
old_cmask = pdev->dev.coherent_dma_mask;
mask = DMA_BIT_MASK(32+shift);
err = pci_set_dma_mask(pdev, mask);
if (err)
goto err_out;
err = pci_set_consistent_dma_mask(pdev, mask);
if (err)
goto err_out;
dev_info(&pdev->dev, "using %d-bit dma mask\n", 32+shift);
}
return 0;
err_out:
pci_set_dma_mask(pdev, old_mask);
pci_set_consistent_dma_mask(pdev, old_cmask);
return err;
}
static void qlcnic_set_port_mode(struct qlcnic_adapter *adapter)
{
u32 val, data;
......@@ -644,10 +584,6 @@ qlcnic_start_firmware(struct qlcnic_adapter *adapter)
{
int val, err, first_boot;
err = qlcnic_set_dma_mask(adapter);
if (err)
return err;
err = qlcnic_can_start_firmware(adapter);
if (err < 0)
return err;
......@@ -698,8 +634,6 @@ qlcnic_start_firmware(struct qlcnic_adapter *adapter)
QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_READY);
qlcnic_update_dma_mask(adapter);
qlcnic_check_options(adapter);
adapter->need_fw_reset = 0;
......@@ -1025,7 +959,7 @@ qlcnic_reset_context(struct qlcnic_adapter *adapter)
static int
qlcnic_setup_netdev(struct qlcnic_adapter *adapter,
struct net_device *netdev)
struct net_device *netdev, u8 pci_using_dac)
{
int err;
struct pci_dev *pdev = adapter->pdev;
......@@ -1048,7 +982,7 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter,
netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
if (adapter->pci_using_dac) {
if (pci_using_dac) {
netdev->features |= NETIF_F_HIGHDMA;
netdev->vlan_features |= NETIF_F_HIGHDMA;
}
......@@ -1078,6 +1012,22 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter,
return 0;
}
static int qlcnic_set_dma_mask(struct pci_dev *pdev, u8 *pci_using_dac)
{
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
*pci_using_dac = 1;
else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) &&
!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
*pci_using_dac = 0;
else {
dev_err(&pdev->dev, "Unable to set DMA mask, aborting\n");
return -EIO;
}
return 0;
}
static int __devinit
qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
......@@ -1086,6 +1036,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
int err;
int pci_func_id = PCI_FUNC(pdev->devfn);
uint8_t revision_id;
uint8_t pci_using_dac;
err = pci_enable_device(pdev);
if (err)
......@@ -1096,6 +1047,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_disable_pdev;
}
err = qlcnic_set_dma_mask(pdev, &pci_using_dac);
if (err)
goto err_out_disable_pdev;
err = pci_request_regions(pdev, qlcnic_driver_name);
if (err)
goto err_out_disable_pdev;
......@@ -1153,7 +1108,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
qlcnic_setup_intr(adapter);
err = qlcnic_setup_netdev(adapter, netdev);
err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac);
if (err)
goto err_out_disable_msi;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment