ARM: dts: imx6: Add imx-weim parameters to dtsi's

imx-weim should always set address-cells to 2,
and size_cells to 1.
On imx6, fsl,weim-cs-gpr will always be &gpr

Set these common parameters in the dtsi file,
rather than in a downstream dts.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6q-evi.dts

@@ -232,10 +232,7 @@ &usdhc1 {
 };
 
 &weim {
-	#address-cells = <2>;
-	#size-cells = <1>;
 	ranges = <0 0 0x08000000 0x08000000>;
-	fsl,weim-cs-gpr = <&gpr>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -613,8 +613,6 @@ &usdhc3 {
 &weim {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "disabled"; /* pin conflict with SPI NOR */
 

arch/arm/boot/dts/imx6qdl.dtsi

@@ -1092,10 +1092,13 @@ mmdc1: mmdc@021b4000 { /* MMDC1 */
 			};
 
 			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				compatible = "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
 			};
 
 			ocotp: ocotp@021bc000 {

arch/arm/boot/dts/imx6sl.dtsi

@@ -893,8 +893,11 @@ rngb: rngb@021b4000 {
 			};
 
 			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,weim-cs-gpr = <&gpr>;
 			};
 
 			ocotp: ocotp@021bc000 {

arch/arm/boot/dts/imx6sx.dtsi

@@ -968,10 +968,13 @@ fec2: ethernet@021b4000 {
 			};
 
 			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
 			};
 
 			ocotp: ocotp@021bc000 {