Commit 1bff2d76 authored by Shawn Guo's avatar Shawn Guo

ARM: mxs: move mxs_get_ocotp() into mach-mxs.c

All the users of mxs_get_ocotp() are in mach-mxs.c.  Move the function
into mach-mxs.c, make it a static function, and then remove ocotp.c.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 0265b6cb
# Common support
obj-y := ocotp.o
obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
...@@ -11,7 +11,6 @@ ...@@ -11,7 +11,6 @@
#ifndef __MACH_MXS_COMMON_H__ #ifndef __MACH_MXS_COMMON_H__
#define __MACH_MXS_COMMON_H__ #define __MACH_MXS_COMMON_H__
extern const u32 *mxs_get_ocotp(void);
extern int mxs_saif_clkmux_select(unsigned int clkmux); extern int mxs_saif_clkmux_select(unsigned int clkmux);
extern int mx23_clocks_init(void); extern int mx23_clocks_init(void);
......
...@@ -183,6 +183,82 @@ static void __init imx28_timer_init(void) ...@@ -183,6 +183,82 @@ static void __init imx28_timer_init(void)
clocksource_of_init(); clocksource_of_init();
} }
#define OCOTP_WORD_OFFSET 0x20
#define OCOTP_WORD_COUNT 0x20
#define BM_OCOTP_CTRL_BUSY (1 << 8)
#define BM_OCOTP_CTRL_ERROR (1 << 9)
#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
static DEFINE_MUTEX(ocotp_mutex);
static u32 ocotp_words[OCOTP_WORD_COUNT];
static const u32 *mxs_get_ocotp(void)
{
struct device_node *np;
void __iomem *ocotp_base;
int timeout = 0x400;
size_t i;
static int once;
if (once)
return ocotp_words;
np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
ocotp_base = of_iomap(np, 0);
WARN_ON(!ocotp_base);
mutex_lock(&ocotp_mutex);
/*
* clk_enable(hbus_clk) for ocotp can be skipped
* as it must be on when system is running.
*/
/* try to clear ERROR bit */
__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
/* check both BUSY and ERROR cleared */
while ((__raw_readl(ocotp_base) &
(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
cpu_relax();
if (unlikely(!timeout))
goto error_unlock;
/* open OCOTP banks for read */
__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
/* approximately wait 32 hclk cycles */
udelay(1);
/* poll BUSY bit becoming cleared */
timeout = 0x400;
while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
cpu_relax();
if (unlikely(!timeout))
goto error_unlock;
for (i = 0; i < OCOTP_WORD_COUNT; i++)
ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
i * 0x10);
/* close banks for power saving */
__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
once = 1;
mutex_unlock(&ocotp_mutex);
return ocotp_words;
error_unlock:
mutex_unlock(&ocotp_mutex);
pr_err("%s: timeout in reading OCOTP\n", __func__);
return NULL;
}
enum mac_oui { enum mac_oui {
OUI_FSL, OUI_FSL,
OUI_DENX, OUI_DENX,
......
/*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/processor.h> /* for cpu_relax() */
#include <mach/mxs.h>
#include <mach/common.h>
#define OCOTP_WORD_OFFSET 0x20
#define OCOTP_WORD_COUNT 0x20
#define BM_OCOTP_CTRL_BUSY (1 << 8)
#define BM_OCOTP_CTRL_ERROR (1 << 9)
#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
static DEFINE_MUTEX(ocotp_mutex);
static u32 ocotp_words[OCOTP_WORD_COUNT];
const u32 *mxs_get_ocotp(void)
{
struct device_node *np;
void __iomem *ocotp_base;
int timeout = 0x400;
size_t i;
static int once = 0;
if (once)
return ocotp_words;
np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
ocotp_base = of_iomap(np, 0);
WARN_ON(!ocotp_base);
mutex_lock(&ocotp_mutex);
/*
* clk_enable(hbus_clk) for ocotp can be skipped
* as it must be on when system is running.
*/
/* try to clear ERROR bit */
__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
/* check both BUSY and ERROR cleared */
while ((__raw_readl(ocotp_base) &
(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
cpu_relax();
if (unlikely(!timeout))
goto error_unlock;
/* open OCOTP banks for read */
__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
/* approximately wait 32 hclk cycles */
udelay(1);
/* poll BUSY bit becoming cleared */
timeout = 0x400;
while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
cpu_relax();
if (unlikely(!timeout))
goto error_unlock;
for (i = 0; i < OCOTP_WORD_COUNT; i++)
ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
i * 0x10);
/* close banks for power saving */
__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
once = 1;
mutex_unlock(&ocotp_mutex);
return ocotp_words;
error_unlock:
mutex_unlock(&ocotp_mutex);
pr_err("%s: timeout in reading OCOTP\n", __func__);
return NULL;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment