thermal: exynos: use correct offset for TMU_CONTROL register on Exynos5260

In exynos5260_tmu_registers tmu_ctrl entry is erroneously
assigned twice.  The second assignment (to EXYNOS_TMU_REG_CONTROL1
define which represents 0x24 value) overrides the first one
(to EXYNOS_TMU_REG_CONTROL define which represents 0x20 value)
which results in the wrong (according to the Exynos5260 SoC
documentation that I have) offset being used for TMU_CONTROL
register.  Fix it by removing the wrong assignment and then
remove no longer used EXYNOS_TMU_REG_CONTROL1 define.

Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

drivers/thermal/samsung/exynos_tmu_data.c

@@ -264,7 +264,6 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
 static const struct exynos_tmu_registers exynos5260_tmu_registers = {
 	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
 	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
-	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL1,
 	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
 	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
 	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,

drivers/thermal/samsung/exynos_tmu_data.h

@@ -75,7 +75,6 @@
 #define EXYNOS_MAX_TRIGGER_PER_REG	4
 
 /* Exynos5260 specific */
-#define EXYNOS_TMU_REG_CONTROL1			0x24
 #define EXYNOS5260_TMU_REG_INTEN		0xC0
 #define EXYNOS5260_TMU_REG_INTSTAT		0xC4
 #define EXYNOS5260_TMU_REG_INTCLEAR		0xC8