Commit 1df8bbd1 authored by Joe Perches's avatar Joe Perches Committed by David S. Miller

tulip/pnic.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent fa0b9a4c
......@@ -40,8 +40,8 @@ void pnic_do_nway(struct net_device *dev)
new_csr6 |= 0x00000200;
}
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: PNIC autonegotiated status %8.8x, %s.\n",
dev->name, phy_reg, medianame[dev->if_port]);
printk(KERN_DEBUG "%s: PNIC autonegotiated status %08x, %s\n",
dev->name, phy_reg, medianame[dev->if_port]);
if (tp->csr6 != new_csr6) {
tp->csr6 = new_csr6;
/* Restart Tx */
......@@ -58,8 +58,8 @@ void pnic_lnk_change(struct net_device *dev, int csr5)
int phy_reg = ioread32(ioaddr + 0xB8);
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: PNIC link changed state %8.8x, CSR5 %8.8x.\n",
dev->name, phy_reg, csr5);
printk(KERN_DEBUG "%s: PNIC link changed state %08x, CSR5 %08x\n",
dev->name, phy_reg, csr5);
if (ioread32(ioaddr + CSR5) & TPLnkFail) {
iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7);
/* If we use an external MII, then we mustn't use the
......@@ -114,9 +114,8 @@ void pnic_timer(unsigned long data)
int csr5 = ioread32(ioaddr + CSR5);
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: PNIC timer PHY status %8.8x, %s "
"CSR5 %8.8x.\n",
dev->name, phy_reg, medianame[dev->if_port], csr5);
printk(KERN_DEBUG "%s: PNIC timer PHY status %08x, %s CSR5 %08x\n",
dev->name, phy_reg, medianame[dev->if_port], csr5);
if (phy_reg & 0x04000000) { /* Remote link fault */
iowrite32(0x0201F078, ioaddr + 0xB8);
next_tick = 1*HZ;
......@@ -126,10 +125,11 @@ void pnic_timer(unsigned long data)
next_tick = 60*HZ;
} else if (csr5 & TPLnkFail) { /* 100baseTx link beat */
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %4.4x, "
"CSR5 %8.8x, PHY %3.3x.\n",
dev->name, medianame[dev->if_port], csr12,
ioread32(ioaddr + CSR5), ioread32(ioaddr + 0xB8));
printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n",
dev->name, medianame[dev->if_port],
csr12,
ioread32(ioaddr + CSR5),
ioread32(ioaddr + 0xB8));
next_tick = 3*HZ;
if (tp->medialock) {
} else if (tp->nwayset && (dev->if_port & 1)) {
......@@ -151,10 +151,11 @@ void pnic_timer(unsigned long data)
tulip_restart_rxtx(tp);
dev->trans_start = jiffies;
if (tulip_debug > 1)
printk(KERN_INFO "%s: Changing PNIC configuration to %s "
"%s-duplex, CSR6 %8.8x.\n",
dev->name, medianame[dev->if_port],
tp->full_duplex ? "full" : "half", new_csr6);
dev_info(&dev->dev,
"Changing PNIC configuration to %s %s-duplex, CSR6 %08x\n",
medianame[dev->if_port],
tp->full_duplex ? "full" : "half",
new_csr6);
}
}
}
......@@ -162,7 +163,7 @@ void pnic_timer(unsigned long data)
mod_timer(&tp->timer, RUN_AT(next_tick));
if(!ioread32(ioaddr + CSR7)) {
if (tulip_debug > 1)
printk(KERN_INFO "%s: sw timer wakeup.\n", dev->name);
dev_info(&dev->dev, "sw timer wakeup\n");
disable_irq(dev->irq);
tulip_refill_rx(dev);
enable_irq(dev->irq);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment