arm64: tegra: Fix 'active-low' warning for Jetson TX1 regulator

Commit 34993594 ("arm64: tegra: Enable HDMI on Jetson TX1")
added a regulator for HDMI on the Jetson TX1 platform. This regulator
has an active high enable, but the GPIO specifier for enabling the
regulator incorrectly defines it as active-low. This causes the
following warning to occur on boot ...

 WARNING KERN regulator@10 GPIO handle specifies active low - ignored

The fixed-regulator binding does not use the active-low flag from the
gpio specifier and purely relies of the presence of the
'enable-active-high' property to determine if it is active high or low
(if this property is omitted). Fix this warning by setting the GPIO
to active-high in the GPIO specifier which aligns with the presense of
the 'enable-active-high' property.

Fixes: 34993594 ("arm64: tegra: Enable HDMI on Jetson TX1")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi

@@ -1612,7 +1612,7 @@ vdd_hdmi: regulator@10 {
 			regulator-name = "VDD_HDMI_5V0";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			gpio = <&exp1 12 GPIO_ACTIVE_LOW>;
+			gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 			vin-supply = <&vdd_5v0_sys>;
 		};