Merge branch '2_6_32_for_next' of git://git.pwsan.com/linux-2.6 into for-next

Documentation/arm/OMAP/omap_pm

+
+The OMAP PM interface
+=====================
+
+This document describes the temporary OMAP PM interface.  Driver
+authors use these functions to communicate minimum latency or
+throughput constraints to the kernel power management code.
+Over time, the intention is to merge features from the OMAP PM
+interface into the Linux PM QoS code.
+
+Drivers need to express PM parameters which:
+
+- support the range of power management parameters present in the TI SRF;
+
+- separate the drivers from the underlying PM parameter
+  implementation, whether it is the TI SRF or Linux PM QoS or Linux
+  latency framework or something else;
+
+- specify PM parameters in terms of fundamental units, such as
+  latency and throughput, rather than units which are specific to OMAP
+  or to particular OMAP variants;
+
+- allow drivers which are shared with other architectures (e.g.,
+  DaVinci) to add these constraints in a way which won't affect non-OMAP
+  systems,
+
+- can be implemented immediately with minimal disruption of other
+  architectures.
+
+
+This document proposes the OMAP PM interface, including the following
+five power management functions for driver code:
+
+1. Set the maximum MPU wakeup latency:
+   (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t)
+
+2. Set the maximum device wakeup latency:
+   (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t)
+
+3. Set the maximum system DMA transfer start latency (CORE pwrdm):
+   (*pdata->set_max_sdma_lat)(struct device *dev, long t)
+
+4. Set the minimum bus throughput needed by a device:
+   (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r)
+
+5. Return the number of times the device has lost context
+   (*pdata->get_dev_context_loss_count)(struct device *dev)
+
+
+Further documentation for all OMAP PM interface functions can be
+found in arch/arm/plat-omap/include/mach/omap-pm.h.
+
+
+The OMAP PM layer is intended to be temporary
+---------------------------------------------
+
+The intention is that eventually the Linux PM QoS layer should support
+the range of power management features present in OMAP3.  As this
+happens, existing drivers using the OMAP PM interface can be modified
+to use the Linux PM QoS code; and the OMAP PM interface can disappear.
+
+
+Driver usage of the OMAP PM functions
+-------------------------------------
+
+As the 'pdata' in the above examples indicates, these functions are
+exposed to drivers through function pointers in driver .platform_data
+structures.  The function pointers are initialized by the board-*.c
+files to point to the corresponding OMAP PM functions:
+.set_max_dev_wakeup_lat will point to
+omap_pm_set_max_dev_wakeup_lat(), etc.  Other architectures which do
+not support these functions should leave these function pointers set
+to NULL.  Drivers should use the following idiom:
+
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, t);
+
+The most common usage of these functions will probably be to specify
+the maximum time from when an interrupt occurs, to when the device
+becomes accessible.  To accomplish this, driver writers should use the
+set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup
+latency, and the set_max_dev_wakeup_lat() function to constrain the
+device wakeup latency (from clk_enable() to accessibility).  For
+example,
+
+        /* Limit MPU wakeup latency */
+        if (pdata->set_max_mpu_wakeup_lat)
+            (*pdata->set_max_mpu_wakeup_lat)(dev, tc);
+
+        /* Limit device powerdomain wakeup latency */
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, td);
+
+        /* total wakeup latency in this example: (tc + td) */
+
+The PM parameters can be overwritten by calling the function again
+with the new value.  The settings can be removed by calling the
+function with a t argument of -1 (except in the case of
+set_max_bus_tput(), which should be called with an r argument of 0).
+
+The fifth function above, omap_pm_get_dev_context_loss_count(),
+is intended as an optimization to allow drivers to determine whether the
+device has lost its internal context.  If context has been lost, the
+driver must restore its internal context before proceeding.
+
+
+Other specialized interface functions
+-------------------------------------
+
+The five functions listed above are intended to be usable by any
+device driver.  DSPBridge and CPUFreq have a few special requirements.
+DSPBridge expresses target DSP performance levels in terms of OPP IDs.
+CPUFreq expresses target MPU performance levels in terms of MPU
+frequency.  The OMAP PM interface contains functions for these
+specialized cases to convert that input information (OPPs/MPU
+frequency) into the form that the underlying power management
+implementation needs:
+
+6. (*pdata->dsp_get_opp_table)(void)
+
+7. (*pdata->dsp_set_min_opp)(u8 opp_id)
+
+8. (*pdata->dsp_get_opp)(void)
+
+9. (*pdata->cpu_get_freq_table)(void)
+
+10. (*pdata->cpu_set_freq)(unsigned long f)
+
+11. (*pdata->cpu_get_freq)(void)

arch/arm/mach-omap2/Makefile

@@ -5,7 +5,7 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
 prcm-common				= prcm.o powerdomain.o
 clock-common				= clock.o clockdomain.o
 
@@ -35,6 +35,11 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
+# PRCM
+obj-$(CONFIG_ARCH_OMAP2)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
+
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o

arch/arm/mach-omap2/board-2430sdp.c

@@ -139,18 +139,19 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static struct omap_board_config_kernel sdp2430_config[] = {
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
+};
+
 static void __init omap_2430sdp_init_irq(void)
 {
+	omap_board_config = sdp2430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
-static struct omap_board_config_kernel sdp2430_config[] = {
-	{OMAP_TAG_LCD, &sdp2430_lcd_config},
-};
-
-
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -200,8 +201,6 @@ static void __init omap_2430sdp_init(void)
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
-	omap_board_config = sdp2430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();

arch/arm/mach-omap2/board-3430sdp.c

@@ -167,13 +167,6 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 	&sdp3430_lcd_device,
 };
 
-static void __init omap_3430sdp_init_irq(void)
-{
-	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct omap_lcd_config sdp3430_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -182,6 +175,15 @@ static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
+static void __init omap_3430sdp_init_irq(void)
+{
+	omap_board_config = sdp3430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static int sdp3430_batt_table[] = {
 /* 0 C*/
 30800, 29500, 28300, 27100,
@@ -482,8 +484,6 @@ static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
 	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	if (omap_rev() > OMAP3430_REV_ES1_0)
 		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else

arch/arm/mach-omap2/board-apollon.c

@@ -248,14 +248,6 @@ static inline void __init apollon_init_smc91x(void)
 	clk_put(gpmc_fck);
 }
 
-static void __init omap_apollon_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	apollon_init_smc91x();
-}
-
 static struct omap_usb_config apollon_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
@@ -271,6 +263,16 @@ static struct omap_board_config_kernel apollon_config[] = {
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
+static void __init omap_apollon_init_irq(void)
+{
+	omap_board_config = apollon_config;
+	omap_board_config_size = ARRAY_SIZE(apollon_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	apollon_init_smc91x();
+}
+
 static void __init apollon_led_init(void)
 {
 	/* LED0 - AA10 */
@@ -319,8 +321,6 @@ static void __init omap_apollon_init(void)
 	 * if not needed.
 	 */
 	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
-	omap_board_config = apollon_config;
-	omap_board_config_size = ARRAY_SIZE(apollon_config);
 	omap_serial_init();
 }
 

arch/arm/mach-omap2/board-generic.c

@@ -31,19 +31,19 @@
 #include <mach/board.h>
 #include <mach/common.h>
 
+static struct omap_board_config_kernel generic_config[] = {
+};
+
 static void __init omap_generic_init_irq(void)
 {
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 }
 
-static struct omap_board_config_kernel generic_config[] = {
-};
-
 static void __init omap_generic_init(void)
 {
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap_serial_init();
 }
 

arch/arm/mach-omap2/board-h4.c

@@ -268,14 +268,6 @@ static void __init h4_init_flash(void)
 	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
-static void __init omap_h4_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	h4_init_flash();
-}
-
 static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -317,6 +309,16 @@ static struct omap_board_config_kernel h4_config[] = {
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
+static void __init omap_h4_init_irq(void)
+{
+	omap_board_config = h4_config;
+	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	h4_init_flash();
+}
+
 static struct at24_platform_data m24c01 = {
 	.byte_len	= SZ_1K / 8,
 	.page_size	= 16,
@@ -361,8 +363,6 @@ static void __init omap_h4_init(void)
 			ARRAY_SIZE(h4_i2c_board_info));
 
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap_board_config = h4_config;
-	omap_board_config_size = ARRAY_SIZE(h4_config);
 	omap_usb_init(&h4_usb_config);
 	omap_serial_init();
 }

arch/arm/mach-omap2/board-ldp.c

@@ -268,14 +268,6 @@ static inline void __init ldp_init_smsc911x(void)
 	gpio_direction_input(eth_gpio);
 }
 
-static void __init omap_ldp_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	ldp_init_smsc911x();
-}
-
 static struct platform_device ldp_lcd_device = {
 	.name		= "ldp_lcd",
 	.id		= -1,
@@ -289,6 +281,16 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
+static void __init omap_ldp_init_irq(void)
+{
+	omap_board_config = ldp_config;
+	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	ldp_init_smsc911x();
+}
+
 static struct twl4030_usb_data ldp_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -372,8 +374,6 @@ static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_board_config = ldp_config;
-	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	ts_gpio = 54;
 	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 	spi_register_board_info(ldp_spi_board_info,

arch/arm/mach-omap2/board-omap3beagle.c

@@ -281,17 +281,6 @@ static int __init omap3_beagle_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3_beagle_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
-	omap_gpio_init();
-}
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
@@ -349,6 +338,19 @@ static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
 };
 
+static void __init omap3_beagle_init_irq(void)
+{
+	omap_board_config = omap3_beagle_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&omap3_beagle_lcd_device,
 	&leds_gpio,
@@ -398,8 +400,6 @@ static void __init omap3_beagle_init(void)
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
-	omap_board_config = omap3_beagle_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap_serial_init();
 
 	omap_cfg_reg(J25_34XX_GPIO170);

arch/arm/mach-omap2/board-omap3evm.c

@@ -274,18 +274,20 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 	},
 };
 
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
 static void __init omap3_evm_init_irq(void)
 {
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	omap3evm_init_smc911x();
 }
 
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
-};
-
 static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_lcd_device,
 	&omap3evm_smc911x_device,
@@ -296,8 +298,6 @@ static void __init omap3_evm_init(void)
 	omap3_evm_i2c_init();
 
 	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 
 	spi_register_board_info(omap3evm_spi_board_info,
 				ARRAY_SIZE(omap3evm_spi_board_info));

arch/arm/mach-omap2/board-omap3pandora.c

@@ -305,14 +305,6 @@ static int __init omap3pandora_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3pandora_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static void __init omap3pandora_ads7846_init(void)
 {
 	int gpio = OMAP3_PANDORA_TS_GPIO;
@@ -375,6 +367,16 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
 };
 
+static void __init omap3pandora_init_irq(void)
+{
+	omap_board_config = omap3pandora_config;
+	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
 	&pandora_leds_gpio,
@@ -386,8 +388,6 @@ static void __init omap3pandora_init(void)
 	omap3pandora_i2c_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
-	omap_board_config = omap3pandora_config;
-	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
 	omap_serial_init();
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));

arch/arm/mach-omap2/board-overo.c

@@ -357,14 +357,6 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
-static void __init overo_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct platform_device overo_lcd_device = {
 	.name		= "overo_lcd",
 	.id		= -1,
@@ -378,6 +370,16 @@ static struct omap_board_config_kernel overo_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&overo_lcd_config },
 };
 
+static void __init overo_init_irq(void)
+{
+	omap_board_config = overo_config;
+	omap_board_config_size = ARRAY_SIZE(overo_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
@@ -386,8 +388,6 @@ static void __init overo_init(void)
 {
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
-	omap_board_config = overo_config;
-	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init();

arch/arm/mach-omap2/board-rx51.c

@@ -56,6 +56,8 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
+	omap_board_config = rx51_config;
+	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
@@ -65,8 +67,6 @@ extern void __init rx51_peripherals_init(void);
 
 static void __init rx51_init(void)
 {
-	omap_board_config = rx51_config;
-	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();

arch/arm/mach-omap2/board-zoom2.c

@@ -90,13 +90,6 @@ static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
 	.rep		= 1,
 };
 
-static void __init omap_zoom2_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct omap_board_config_kernel zoom2_config[] __initdata = {
 };
 
@@ -212,6 +205,15 @@ static struct twl4030_usb_data zoom2_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static void __init omap_zoom2_init_irq(void)
+{
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -262,8 +264,6 @@ extern int __init omap_zoom2_debugboard_init(void);
 static void __init omap_zoom2_init(void)
 {
 	omap_i2c_init();
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap_serial_init();
 	omap_zoom2_debugboard_init();
 	usb_musb_init();

arch/arm/mach-omap2/clock34xx.c

@@ -27,6 +27,7 @@
 #include <linux/limits.h>
 #include <linux/bitops.h>
 
+#include <mach/cpu.h>
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
@@ -1067,17 +1068,17 @@ static int __init omap2_clk_arch_init(void)
 		return -EINVAL;
 
 	/* REVISIT: not yet ready for 343x */
-#if 0
-	if (clk_set_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-#endif
+	if (clk_set_rate(&dpll1_ck, mpurate))
+		printk(KERN_ERR "*** Unable to set MPU rate\n");
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): "
 	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
-	       (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;
+	       (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10),
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ;
+
+	calibrate_delay();
 
 	return 0;
 }
@@ -1136,7 +1137,7 @@ int __init omap2_clk_init(void)
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
+	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
 	       "%ld.%01ld/%ld/%ld MHz\n",
 	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
 	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));

arch/arm/mach-omap2/clock34xx.h

@@ -1020,6 +1020,7 @@ static struct clk arm_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= arm_fck_clksel,
+	.clkdm_name	= "mpu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1155,7 +1156,6 @@ static struct clk gfx_cg1_ck = {
 	.name		= "gfx_cg1_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
 	.clkdm_name	= "gfx_3430es1_clkdm",
@@ -1166,7 +1166,6 @@ static struct clk gfx_cg2_ck = {
 	.name		= "gfx_cg2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
 	.clkdm_name	= "gfx_3430es1_clkdm",
@@ -1210,7 +1209,6 @@ static struct clk sgx_ick = {
 	.name		= "sgx_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
 	.clkdm_name	= "sgx_clkdm",
@@ -1223,7 +1221,6 @@ static struct clk d2d_26m_fck = {
 	.name		= "d2d_26m_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
 	.clkdm_name	= "d2d_clkdm",
@@ -1234,7 +1231,6 @@ static struct clk modem_fck = {
 	.name		= "modem_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
 	.clkdm_name	= "d2d_clkdm",
@@ -1622,7 +1618,6 @@ static struct clk core_l3_ick = {
 	.name		= "core_l3_ick",
 	.ops		= &clkops_null,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1691,7 +1686,6 @@ static struct clk core_l4_ick = {
 	.name		= "core_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2089,7 +2083,6 @@ static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_54m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2100,7 +2093,6 @@ static struct clk dss_96m_fck = {
 	.name		= "dss_96m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_96m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2111,7 +2103,6 @@ static struct clk dss2_alwon_fck = {
 	.name		= "dss2_alwon_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2123,7 +2114,6 @@ static struct clk dss_ick_3430es1 = {
 	.name		= "dss_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2135,7 +2125,6 @@ static struct clk dss_ick_3430es2 = {
 	.name		= "dss_ick",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2159,7 +2148,6 @@ static struct clk cam_ick = {
 	.name		= "cam_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
 	.clkdm_name	= "cam_clkdm",
@@ -2170,7 +2158,6 @@ static struct clk csi2_96m_fck = {
 	.name		= "csi2_96m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &core_96m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
 	.clkdm_name	= "cam_clkdm",
@@ -2183,7 +2170,6 @@ static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll5_m2_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2194,7 +2180,6 @@ static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &omap_48m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2206,7 +2191,6 @@ static struct clk usbhost_ick = {
 	.name		= "usbhost_ick",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2268,7 +2252,6 @@ static struct clk gpt1_fck = {
 static struct clk wkup_32k_fck = {
 	.name		= "wkup_32k_fck",
 	.ops		= &clkops_null,
-	.init		= &omap2_init_clk_clkdm,
 	.parent		= &omap_32k_fck,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
@@ -2383,7 +2366,6 @@ static struct clk per_96m_fck = {
 	.name		= "per_96m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2392,7 +2374,6 @@ static struct clk per_48m_fck = {
 	.name		= "per_48m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };

arch/arm/mach-omap2/cm.c

+/*
+ * OMAP2/3 CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
+#define MAX_MODULE_READY_TIME		20000
+
+static const u8 cm_idlest_offs[] = {
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
+};
+
+/**
+ * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * XXX document
+ */
+int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+	int ena = 0, i = 0;
+	u8 cm_idlest_reg;
+	u32 mask;
+
+	if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
+		return -EINVAL;
+
+	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
+
+	if (cpu_is_omap24xx())
+		ena = idlest_shift;
+	else if (cpu_is_omap34xx())
+		ena = 0;
+	else
+		BUG();
+
+	mask = 1 << idlest_shift;
+
+	/* XXX should be OMAP2 CM */
+	while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) &&
+	       (i++ < MAX_MODULE_READY_TIME))
+		udelay(1);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+

arch/arm/mach-omap2/cm.h

@@ -98,6 +98,10 @@ extern u32 cm_read_mod_reg(s16 module, u16 idx);
 extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
 extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 
+extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+				      u8 idlest_shift);
+extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
+
 static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
 	return cm_rmw_mod_reg_bits(bits, bits, module, idx);

arch/arm/mach-omap2/cm4xxx.c

+/*
+ * OMAP4 CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-4xxx.h"
+
+/* XXX move this to cm.h */
+/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
+#define MAX_MODULE_READY_TIME			20000
+
+/*
+ * OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the
+ * CM_CLKCTRL register.
+ */
+#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK	(0x2 << 16)
+
+/*
+ * OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and
+ * the PRCM module offset address (from the CM module base) in bits 15-0.
+ */
+#define OMAP4_PRCM_MOD_CM_ID_SHIFT		16
+#define OMAP4_PRCM_MOD_OFFS_MASK		0xffff
+
+/**
+ * omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset (XXX example)
+ * @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example)
+ *
+ * XXX document
+ */
+int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
+{
+	int i = 0;
+	u8 cm_id;
+	u16 prcm_mod_offs;
+	u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
+
+	cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
+	prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
+
+	while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
+				       OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
+	       (i++ < MAX_MODULE_READY_TIME))
+		udelay(1);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+

arch/arm/mach-omap2/io.c

@@ -32,17 +32,23 @@
 #include <mach/sram.h>
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
+#include <mach/serial.h>
 
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
+#include <mach/omap-pm.h>
 #include <mach/powerdomain.h>
-
 #include "powerdomains.h"
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
 #endif
+#include <mach/omap_hwmod.h>
+#include "omap_hwmod_2420.h"
+#include "omap_hwmod_2430.h"
+#include "omap_hwmod_34xx.h"
+
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -279,11 +285,26 @@ static int __init _omap2_init_reprogram_sdrc(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 				 struct omap_sdrc_params *sdrc_cs1)
 {
+	struct omap_hwmod **hwmods = NULL;
+
+	if (cpu_is_omap2420())
+		hwmods = omap2420_hwmods;
+	else if (cpu_is_omap2430())
+		hwmods = omap2430_hwmods;
+	else if (cpu_is_omap34xx())
+		hwmods = omap34xx_hwmods;
+
+	omap_hwmod_init(hwmods);
 	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
+	/* The OPP tables have to be registered before a clk init */
+	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+	omap_serial_early_init();
+	omap_hwmod_late_init();
+	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
 #endif

arch/arm/mach-omap2/omap_hwmod_2420.h

+/*
+ * omap_hwmod_2420.h - hardware modules present on the OMAP2420 chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
+
+#ifdef CONFIG_ARCH_OMAP2420
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-24xx.h"
+
+static struct omap_hwmod omap2420_mpu_hwmod;
+static struct omap_hwmod omap2420_l3_hwmod;
+static struct omap_hwmod omap2420_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
+	.master	= &omap2420_l3_hwmod,
+	.slave	= &omap2420_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
+	.master = &omap2420_mpu_hwmod,
+	.slave	= &omap2420_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
+	&omap2420_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2420_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap2420_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l3_masters),
+	.slaves		= omap2420_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+static struct omap_hwmod omap2420_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
+	.master	= &omap2420_l4_core_hwmod,
+	.slave	= &omap2420_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2420_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap2420_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
+	.slaves		= omap2420_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2420_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap2420_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
+	.slaves		= omap2420_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
+	&omap2420_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2420_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "mpu_ck",
+	.masters	= omap2420_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static __initdata struct omap_hwmod *omap2420_hwmods[] = {
+	&omap2420_l3_hwmod,
+	&omap2420_l4_core_hwmod,
+	&omap2420_l4_wkup_hwmod,
+	&omap2420_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap2420_hwmods		0
+#endif
+
+#endif
+
+

arch/arm/mach-omap2/omap_hwmod_2430.h

+/*
+ * omap_hwmod_2430.h - hardware modules present on the OMAP2430 chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
+
+#ifdef CONFIG_ARCH_OMAP2430
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-24xx.h"
+
+static struct omap_hwmod omap2430_mpu_hwmod;
+static struct omap_hwmod omap2430_l3_hwmod;
+static struct omap_hwmod omap2430_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
+	.master	= &omap2430_l3_hwmod,
+	.slave	= &omap2430_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
+	.master = &omap2430_mpu_hwmod,
+	.slave	= &omap2430_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
+	&omap2430_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2430_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap2430_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l3_masters),
+	.slaves		= omap2430_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+static struct omap_hwmod omap2430_l4_wkup_hwmod;
+static struct omap_hwmod omap2430_mmc1_hwmod;
+static struct omap_hwmod omap2430_mmc2_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
+	.master	= &omap2430_l4_core_hwmod,
+	.slave	= &omap2430_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2430_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap2430_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
+	.slaves		= omap2430_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2430_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap2430_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
+	.slaves		= omap2430_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
+	&omap2430_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2430_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "mpu_ck",
+	.masters	= omap2430_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+static __initdata struct omap_hwmod *omap2430_hwmods[] = {
+	&omap2430_l3_hwmod,
+	&omap2430_l4_core_hwmod,
+	&omap2430_l4_wkup_hwmod,
+	&omap2430_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap2430_hwmods		0
+#endif
+
+#endif
+
+

arch/arm/mach-omap2/omap_hwmod_34xx.h

+/*
+ * omap_hwmod_34xx.h - hardware modules present on the OMAP34xx chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
+
+#ifdef CONFIG_ARCH_OMAP34XX
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-34xx.h"
+
+static struct omap_hwmod omap34xx_mpu_hwmod;
+static struct omap_hwmod omap34xx_l3_hwmod;
+static struct omap_hwmod omap34xx_l4_core_hwmod;
+static struct omap_hwmod omap34xx_l4_per_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap34xx_l3__l4_core = {
+	.master	= &omap34xx_l3_hwmod,
+	.slave	= &omap34xx_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L3 -> L4_PER interface */
+static struct omap_hwmod_ocp_if omap34xx_l3__l4_per = {
+	.master = &omap34xx_l3_hwmod,
+	.slave	= &omap34xx_l4_per_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap34xx_mpu__l3 = {
+	.master = &omap34xx_mpu_hwmod,
+	.slave	= &omap34xx_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l3_slaves[] = {
+	&omap34xx_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l3_masters[] = {
+	&omap34xx_l3__l4_core,
+	&omap34xx_l3__l4_per,
+};
+
+/* L3 */
+static struct omap_hwmod omap34xx_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap34xx_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l3_masters),
+	.slaves		= omap34xx_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+static struct omap_hwmod omap34xx_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__l4_wkup = {
+	.master	= &omap34xx_l4_core_hwmod,
+	.slave	= &omap34xx_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_core_slaves[] = {
+	&omap34xx_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_core_masters[] = {
+	&omap34xx_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap34xx_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap34xx_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_core_masters),
+	.slaves		= omap34xx_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_per_slaves[] = {
+	&omap34xx_l3__l4_per,
+};
+
+/* Master interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_per_masters[] = {
+};
+
+/* L4 PER */
+static struct omap_hwmod omap34xx_l4_per_hwmod = {
+	.name		= "l4_per_hwmod",
+	.masters	= omap34xx_l4_per_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_per_masters),
+	.slaves		= omap34xx_l4_per_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_per_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_slaves[] = {
+	&omap34xx_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap34xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap34xx_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_masters),
+	.slaves		= omap34xx_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap34xx_mpu_masters[] = {
+	&omap34xx_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap34xx_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "arm_fck",
+	.masters	= omap34xx_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+	&omap34xx_l3_hwmod,
+	&omap34xx_l4_core_hwmod,
+	&omap34xx_l4_per_hwmod,
+	&omap34xx_l4_wkup_hwmod,
+	&omap34xx_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap34xx_hwmods		0
+#endif
+
+#endif
+
+

arch/arm/mach-omap2/powerdomain.c

@@ -90,7 +90,7 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 	if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
 		return ERR_PTR(-EINVAL);
 
-	for (pd = deps; pd; pd++) {
+	for (pd = deps; pd->pwrdm_name; pd++) {
 
 		if (!omap_chip_is(pd->omap_chip))
 			continue;
@@ -103,7 +103,7 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 
 	}
 
-	if (!pd)
+	if (!pd->pwrdm_name)
 		return ERR_PTR(-ENOENT);
 
 	return pd->pwrdm;

arch/arm/mach-omap2/serial.c

@@ -578,7 +578,7 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 #endif
 };
 
-void __init omap_serial_init(void)
+void __init omap_serial_early_init(void)
 {
 	int i;
 	char name[16];
@@ -624,6 +624,18 @@ void __init omap_serial_init(void)
 			p->irq += 32;
 
 		omap_uart_enable_clocks(uart);
+	}
+}
+
+void __init omap_serial_init(void)
+{
+	int i;
+
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
 

arch/arm/plat-omap/Kconfig

@@ -187,6 +187,19 @@ config OMAP_SERIAL_WAKE
 	  to data on the serial RX line. This allows you to wake the
 	  system from serial console.
 
+choice
+	prompt "OMAP PM layer selection"
+	depends on ARCH_OMAP
+	default OMAP_PM_NOOP
+
+config OMAP_PM_NONE
+	bool "No PM layer"
+
+config OMAP_PM_NOOP
+	bool "No-op/debug PM layer"
+
+endchoice
+
 endmenu
 
 endif

arch/arm/plat-omap/Makefile

@@ -12,6 +12,10 @@ obj-  :=
 # OCPI interconnect support for 1710, 1610 and 5912
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
+# omap_device support (OMAP2+ only at the moment)
+obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
 obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
@@ -26,3 +30,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
 
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file

arch/arm/plat-omap/clock.c

@@ -488,7 +488,7 @@ static int __init clk_debugfs_init(void)
 	}
 	return 0;
 err_out:
-	debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+	debugfs_remove_recursive(clk_debugfs_root);
 	return err;
 }
 late_initcall(clk_debugfs_init);

arch/arm/plat-omap/include/mach/omap_device.h

+/*
+ * omap_device headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Eventually this type of functionality should either be
+ * a) implemented via arch-specific pointers in platform_device
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_device
+ *
+ * omap_device differs from omap_hwmod in that it includes external
+ * (e.g., board- and system-level) integration details.  omap_hwmod
+ * stores hardware data that is invariant for a given OMAP chip.
+ *
+ * To do:
+ * - GPIO integration
+ * - regulator integration
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/omap_hwmod.h>
+
+/* omap_device._state values */
+#define OMAP_DEVICE_STATE_UNKNOWN	0
+#define OMAP_DEVICE_STATE_ENABLED	1
+#define OMAP_DEVICE_STATE_IDLE		2
+#define OMAP_DEVICE_STATE_SHUTDOWN	3
+
+/**
+ * struct omap_device - omap_device wrapper for platform_devices
+ * @pdev: platform_device
+ * @hwmods: (one .. many per omap_device)
+ * @hwmods_cnt: ARRAY_SIZE() of @hwmods
+ * @pm_lats: ptr to an omap_device_pm_latency table
+ * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
+ * @pm_lat_level: array index of the last odpl entry executed - -1 if never
+ * @dev_wakeup_lat: dev wakeup latency in microseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
+ * @_state: one of OMAP_DEVICE_STATE_* (see above)
+ * @flags: device flags
+ *
+ * Integrates omap_hwmod data into Linux platform_device.
+ *
+ * Field names beginning with underscores are for the internal use of
+ * the omap_device code.
+ *
+ */
+struct omap_device {
+	struct platform_device		pdev;
+	struct omap_hwmod		**hwmods;
+	struct omap_device_pm_latency	*pm_lats;
+	u32				dev_wakeup_lat;
+	u32				_dev_wakeup_lat_limit;
+	u8				pm_lats_cnt;
+	s8				pm_lat_level;
+	u8				hwmods_cnt;
+	u8				_state;
+};
+
+/* Device driver interface (call via platform_data fn ptrs) */
+
+int omap_device_enable(struct platform_device *pdev);
+int omap_device_idle(struct platform_device *pdev);
+int omap_device_shutdown(struct platform_device *pdev);
+
+/* Core code interface */
+
+int omap_device_count_resources(struct omap_device *od);
+int omap_device_fill_resources(struct omap_device *od, struct resource *res);
+
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt);
+
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **oh, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt);
+
+int omap_device_register(struct omap_device *od);
+
+/* OMAP PM interface */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit);
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+
+/* Other */
+
+int omap_device_idle_hwmods(struct omap_device *od);
+int omap_device_enable_hwmods(struct omap_device *od);
+
+int omap_device_disable_clocks(struct omap_device *od);
+int omap_device_enable_clocks(struct omap_device *od);
+
+
+/*
+ * Entries should be kept in latency order ascending
+ *
+ * deact_lat is the maximum number of microseconds required to complete
+ * deactivate_func() at the device's slowest OPP.
+ *
+ * act_lat is the maximum number of microseconds required to complete
+ * activate_func() at the device's slowest OPP.
+ *
+ * This will result in some suboptimal power management decisions at fast
+ * OPPs, but avoids having to recompute all device power management decisions
+ * if the system shifts from a fast OPP to a slow OPP (in order to meet
+ * latency requirements).
+ *
+ * XXX should deactivate_func/activate_func() take platform_device pointers
+ * rather than omap_device pointers?
+ */
+struct omap_device_pm_latency {
+	u32 deactivate_lat;
+	int (*deactivate_func)(struct omap_device *od);
+	u32 activate_lat;
+	int (*activate_func)(struct omap_device *od);
+};
+
+
+#endif
+

arch/arm/plat-omap/include/mach/sdrc.h

@@ -21,19 +21,28 @@
 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
 
 #define SDRC_SYSCONFIG		0x010
+#define SDRC_CS_CFG		0x040
+#define SDRC_SHARING		0x044
+#define SDRC_ERR_TYPE		0x04C
 #define SDRC_DLLA_CTRL		0x060
 #define SDRC_DLLA_STATUS	0x064
 #define SDRC_DLLB_CTRL		0x068
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
+#define SDRC_MCFG_0		0x080
 #define SDRC_MR_0		0x084
+#define SDRC_EMR2_0		0x08c
 #define SDRC_ACTIM_CTRL_A_0	0x09c
 #define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
+#define SDRC_MANUAL_0		0x0a8
+#define SDRC_MCFG_1		0x0B0
 #define SDRC_MR_1		0x0B4
+#define SDRC_EMR2_1		0x0BC
 #define SDRC_ACTIM_CTRL_A_1	0x0C4
 #define SDRC_ACTIM_CTRL_B_1	0x0C8
 #define SDRC_RFR_CTRL_1		0x0D4
+#define SDRC_MANUAL_1		0x0D8
 
 /*
  * These values represent the number of memory clock cycles between

arch/arm/plat-omap/include/mach/serial.h

@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
+#include <linux/init.h>
+
 #if defined(CONFIG_ARCH_OMAP1)
 /* OMAP1 serial ports */
 #define OMAP_UART1_BASE		0xfffb0000
@@ -53,6 +55,7 @@
 			})
 
 #ifndef __ASSEMBLER__
+extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
 extern int omap_uart_can_sleep(void);
 extern void omap_uart_check_wakeup(void);

arch/arm/plat-omap/omap-pm-noop.c

+/*
+ * omap-pm-noop.c - OMAP power management interface - dummy version
+ *
+ * This code implements the OMAP power management interface to
+ * drivers, CPUIdle, CPUFreq, and DSP Bridge.  It is strictly for
+ * debug/demonstration use, as it does nothing but printk() whenever a
+ * function is called (when DEBUG is defined, below)
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order):
+ * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
+ * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+
+/* Interface documentation is in mach/omap-pm.h */
+#include <mach/omap-pm.h>
+
+#include <mach/powerdomain.h>
+
+struct omap_opp *dsp_opps;
+struct omap_opp *mpu_opps;
+struct omap_opp *l3_opps;
+
+/*
+ * Device-driver-originated constraints (via board-*.c files)
+ */
+
+void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the MPU to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on the MPU and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+}
+
+void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+{
+	if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
+	    agent_id != OCP_TARGET_AGENT)) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (r == 0)
+		pr_debug("OMAP PM: remove min bus tput constraint: "
+			 "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+	else
+		pr_debug("OMAP PM: add min bus tput constraint: "
+			 "dev %s for agent_id %d: rate %ld KiB\n",
+			 dev_name(dev), agent_id, r);
+
+	/*
+	 * This code should model the interconnect and compute the
+	 * required clock frequency, convert that to a VDD2 OPP ID, then
+	 * set the VDD2 OPP appropriately.
+	 *
+	 * TI CDP code can call constraint_set here on the VDD2 OPP.
+	 */
+}
+
+void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max device latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max device latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the device to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on that powerdomain and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.  Conceivably, this code should also determine
+	 * whether to actually disable the device clocks or not,
+	 * depending on how long it takes to re-enable the clocks.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+}
+
+void omap_pm_set_max_sdma_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max DMA latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max DMA latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux PM QOS params, this code should scan the
+	 * list of maximum CPU and DMA latencies and select the
+	 * smallest, then set cpu_dma_latency pm_qos_param
+	 * accordingly.
+	 *
+	 * For future Linux PM QOS params, with separate CPU and DMA
+	 * latency params, this code should just set the dma_latency param.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+
+}
+
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+const struct omap_opp *omap_pm_dsp_get_opp_table(void)
+{
+	pr_debug("OMAP PM: DSP request for OPP table\n");
+
+	/*
+	 * Return DSP frequency table here:  The final item in the
+	 * array should have .rate = .opp_id = 0.
+	 */
+
+	return NULL;
+}
+
+void omap_pm_dsp_set_min_opp(u8 opp_id)
+{
+	if (opp_id == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
+
+	/*
+	 *
+	 * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
+	 * can just test to see which is higher, the CPU's desired OPP
+	 * ID or the DSP's desired OPP ID, and use whichever is
+	 * highest.
+	 *
+	 * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
+	 * rate is keyed on MPU speed, not the OPP ID.  So we need to
+	 * map the OPP ID to the MPU speed for use with clk_set_rate()
+	 * if it is higher than the current OPP clock rate.
+	 *
+	 */
+}
+
+
+u8 omap_pm_dsp_get_opp(void)
+{
+	pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
+
+	/*
+	 * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
+	 *
+	 * CDP12.14+:
+	 * Call clk_get_rate() on the OPP custom clock, map that to an
+	 * OPP ID using the tables defined in board-*.c/chip-*.c files.
+	 */
+
+	return 0;
+}
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
+{
+	pr_debug("OMAP PM: CPUFreq request for frequency table\n");
+
+	/*
+	 * Return CPUFreq frequency table here: loop over
+	 * all VDD1 clkrates, pull out the mpu_ck frequencies, build
+	 * table
+	 */
+
+	return NULL;
+}
+
+void omap_pm_cpu_set_freq(unsigned long f)
+{
+	if (f == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
+		 f);
+
+	/*
+	 * For l-o dev tree, determine whether MPU freq or DSP OPP id
+	 * freq is higher.  Find the OPP ID corresponding to the
+	 * higher frequency.  Call clk_round_rate() and clk_set_rate()
+	 * on the OPP custom clock.
+	 *
+	 * CDP should just be able to set the VDD1 OPP clock rate here.
+	 */
+}
+
+unsigned long omap_pm_cpu_get_freq(void)
+{
+	pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
+
+	/*
+	 * Call clk_get_rate() on the mpu_ck.
+	 */
+
+	return 0;
+}
+
+/*
+ * Device context loss tracking
+ */
+
+int omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+	if (!dev) {
+		WARN_ON(1);
+		return -EINVAL;
+	};
+
+	pr_debug("OMAP PM: returning context loss count for dev %s\n",
+		 dev_name(dev));
+
+	/*
+	 * Map the device to the powerdomain.  Return the powerdomain
+	 * off counter.
+	 */
+
+	return 0;
+}
+
+
+/* Should be called before clk framework init */
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+				 struct omap_opp *dsp_opp_table,
+				 struct omap_opp *l3_opp_table)
+{
+	mpu_opps = mpu_opp_table;
+	dsp_opps = dsp_opp_table;
+	l3_opps = l3_opp_table;
+	return 0;
+}
+
+/* Must be called after clock framework is initialized */
+int __init omap_pm_if_init(void)
+{
+	return 0;
+}
+
+void omap_pm_if_exit(void)
+{
+	/* Deallocate CPUFreq frequency table here */
+}
+