powerpc/eeh: Convert log messages to eeh_edev_* macros

Convert existing messages, where appropriate, to use the eeh_edev_*
logging macros.

The only effect should be minor adjustments to the log messages, apart
from:

- A new message in pseries_eeh_probe() "Probing device" to match the
powernv case.
- The "Probing device" message in pnv_eeh_probe() is now generated
slightly later, which will mean that it is no longer emitted for
devices that aren't probed due to the initial checks.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce505a0a7a4a5b0367f0f40f8b26e7c0a9cf4cb7.1565930772.git.sbobroff@linux.ibm.com

arch/powerpc/include/asm/ppc-pci.h

@@ -62,11 +62,6 @@ void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode);
 void eeh_sysfs_add_device(struct pci_dev *pdev);
 void eeh_sysfs_remove_device(struct pci_dev *pdev);
 
-static inline const char *eeh_pci_name(struct pci_dev *pdev) 
-{ 
-	return pdev ? pci_name(pdev) : "<null>";
-} 
-
 static inline const char *eeh_driver_name(struct pci_dev *pdev)
 {
 	return (pdev && pdev->driver) ? pdev->driver->name : "<null>";

arch/powerpc/kernel/eeh.c

@@ -470,8 +470,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 	/* Access to IO BARs might get this far and still not want checking. */
 	if (!pe) {
 		eeh_stats.ignored_check++;
-		pr_debug("EEH: Ignored check for %s\n",
-			eeh_pci_name(dev));
+		eeh_edev_dbg(edev, "Ignored check\n");
 		return 0;
 	}
 
@@ -511,12 +510,11 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 			if (dn)
 				location = of_get_property(dn, "ibm,loc-code",
 						NULL);
-			printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
-				"location=%s driver=%s pci addr=%s\n",
+			eeh_edev_err(edev, "%d reads ignored for recovering device at location=%s driver=%s\n",
 				pe->check_count,
 				location ? location : "unknown",
-				eeh_driver_name(dev), eeh_pci_name(dev));
-			printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+				eeh_driver_name(dev));
+			eeh_edev_err(edev, "Might be infinite loop in %s driver\n",
 				eeh_driver_name(dev));
 			dump_stack();
 		}
@@ -1188,12 +1186,11 @@ void eeh_add_device_late(struct pci_dev *dev)
 	if (!dev)
 		return;
 
-	pr_debug("EEH: Adding device %s\n", pci_name(dev));
-
 	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
 	edev = pdn_to_eeh_dev(pdn);
+	eeh_edev_dbg(edev, "Adding device\n");
 	if (edev->pdev == dev) {
-		pr_debug("EEH: Device %s already referenced!\n", pci_name(dev));
+		eeh_edev_dbg(edev, "Device already referenced!\n");
 		return;
 	}
 
@@ -1296,10 +1293,10 @@ void eeh_remove_device(struct pci_dev *dev)
 	edev = pci_dev_to_eeh_dev(dev);
 
 	/* Unregister the device with the EEH/PCI address search system */
-	pr_debug("EEH: Removing device %s\n", pci_name(dev));
+	dev_dbg(&dev->dev, "EEH: Removing device\n");
 
 	if (!edev || !edev->pdev || !edev->pe) {
-		pr_debug("EEH: Not referenced !\n");
+		dev_dbg(&dev->dev, "EEH: Device not referenced!\n");
 		return;
 	}
 

arch/powerpc/kernel/eeh_cache.c

@@ -148,8 +148,8 @@ eeh_addr_cache_insert(struct pci_dev *dev, resource_size_t alo,
 	piar->pcidev = dev;
 	piar->flags = flags;
 
-	pr_debug("PIAR: insert range=[%pap:%pap] dev=%s\n",
-		 &alo, &ahi, pci_name(dev));
+	eeh_edev_dbg(piar->edev, "PIAR: insert range=[%pap:%pap]\n",
+		 &alo, &ahi);
 
 	rb_link_node(&piar->rb_node, parent, p);
 	rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
@@ -229,8 +229,8 @@ static inline void __eeh_addr_cache_rmv_dev(struct pci_dev *dev)
 		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
 
 		if (piar->pcidev == dev) {
-			pr_debug("PIAR: remove range=[%pap:%pap] dev=%s\n",
-				 &piar->addr_lo, &piar->addr_hi, pci_name(dev));
+			eeh_edev_dbg(piar->edev, "PIAR: remove range=[%pap:%pap]\n",
+				 &piar->addr_lo, &piar->addr_hi);
 			rb_erase(n, &pci_io_addr_cache_root.rb_root);
 			kfree(piar);
 			goto restart;

arch/powerpc/kernel/eeh_driver.c

@@ -456,12 +456,9 @@ static void *eeh_add_virt_device(struct eeh_dev *edev)
 {
 	struct pci_driver *driver;
 	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
-	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
 	if (!(edev->physfn)) {
-		pr_warn("%s: EEH dev %04x:%02x:%02x.%01x not for VF\n",
-			__func__, pdn->phb->global_number, pdn->busno,
-			PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+		eeh_edev_warn(edev, "Not for VF\n");
 		return NULL;
 	}
 
@@ -475,7 +472,7 @@ static void *eeh_add_virt_device(struct eeh_dev *edev)
 	}
 
 #ifdef CONFIG_PCI_IOV
-	pci_iov_add_virtfn(edev->physfn, pdn->vf_index);
+	pci_iov_add_virtfn(edev->physfn, eeh_dev_to_pdn(edev)->vf_index);
 #endif
 	return NULL;
 }

arch/powerpc/kernel/eeh_pe.c

@@ -379,8 +379,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 
 	/* Check if the PE number is valid */
 	if (!eeh_has_flag(EEH_VALID_PE_ZERO) && !edev->pe_config_addr) {
-		pr_err("%s: Invalid PE#0 for edev 0x%x on PHB#%x\n",
-		       __func__, config_addr, pdn->phb->global_number);
+		eeh_edev_err(edev, "PE#0 is invalid for this PHB!\n");
 		return -EINVAL;
 	}
 
@@ -398,12 +397,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 
 		/* Put the edev to PE */
 		list_add_tail(&edev->entry, &pe->edevs);
-		pr_debug("EEH: Add %04x:%02x:%02x.%01x to Bus PE#%x\n",
-			 pdn->phb->global_number,
-			 pdn->busno,
-			 PCI_SLOT(pdn->devfn),
-			 PCI_FUNC(pdn->devfn),
-			 pe->addr);
+		eeh_edev_dbg(edev, "Added to bus PE\n");
 		return 0;
 	} else if (pe && (pe->type & EEH_PE_INVALID)) {
 		list_add_tail(&edev->entry, &pe->edevs);
@@ -420,13 +414,8 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 			parent = parent->parent;
 		}
 
-		pr_debug("EEH: Add %04x:%02x:%02x.%01x to Device "
-			 "PE#%x, Parent PE#%x\n",
-			 pdn->phb->global_number,
-			 pdn->busno,
-			 PCI_SLOT(pdn->devfn),
-			 PCI_FUNC(pdn->devfn),
-			 pe->addr, pe->parent->addr);
+		eeh_edev_dbg(edev, "Added to device PE (parent: PE#%x)\n",
+			     pe->parent->addr);
 		return 0;
 	}
 
@@ -468,13 +457,8 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 	list_add_tail(&pe->child, &parent->child_list);
 	list_add_tail(&edev->entry, &pe->edevs);
 	edev->pe = pe;
-	pr_debug("EEH: Add %04x:%02x:%02x.%01x to "
-		 "Device PE#%x, Parent PE#%x\n",
-		 pdn->phb->global_number,
-		 pdn->busno,
-		 PCI_SLOT(pdn->devfn),
-		 PCI_FUNC(pdn->devfn),
-		 pe->addr, pe->parent->addr);
+	eeh_edev_dbg(edev, "Added to device PE (parent: PE#%x)\n",
+		     pe->parent->addr);
 
 	return 0;
 }
@@ -492,15 +476,10 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
 {
 	struct eeh_pe *pe, *parent, *child;
 	int cnt;
-	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
 	pe = eeh_dev_to_pe(edev);
 	if (!pe) {
-		pr_debug("%s: No PE found for device %04x:%02x:%02x.%01x\n",
-			 __func__,  pdn->phb->global_number,
-			 pdn->busno,
-			 PCI_SLOT(pdn->devfn),
-			 PCI_FUNC(pdn->devfn));
+		eeh_edev_dbg(edev, "No PE found for device.\n");
 		return -EEXIST;
 	}
 
@@ -717,17 +696,13 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
 	if (!(edev->mode & (EEH_DEV_ROOT_PORT | EEH_DEV_DS_PORT)))
 		return;
 
-	pr_debug("%s: Check PCIe link for %04x:%02x:%02x.%01x ...\n",
-		 __func__, pdn->phb->global_number,
-		 pdn->busno,
-		 PCI_SLOT(pdn->devfn),
-		 PCI_FUNC(pdn->devfn));
+	eeh_edev_dbg(edev, "Checking PCIe link...\n");
 
 	/* Check slot status */
 	cap = edev->pcie_cap;
 	eeh_ops->read_config(pdn, cap + PCI_EXP_SLTSTA, 2, &val);
 	if (!(val & PCI_EXP_SLTSTA_PDS)) {
-		pr_debug("  No card in the slot (0x%04x) !\n", val);
+		eeh_edev_dbg(edev, "No card in the slot (0x%04x) !\n", val);
 		return;
 	}
 
@@ -736,7 +711,7 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
 	if (val & PCI_EXP_SLTCAP_PCP) {
 		eeh_ops->read_config(pdn, cap + PCI_EXP_SLTCTL, 2, &val);
 		if (val & PCI_EXP_SLTCTL_PCC) {
-			pr_debug("  In power-off state, power it on ...\n");
+			eeh_edev_dbg(edev, "In power-off state, power it on ...\n");
 			val &= ~(PCI_EXP_SLTCTL_PCC | PCI_EXP_SLTCTL_PIC);
 			val |= (0x0100 & PCI_EXP_SLTCTL_PIC);
 			eeh_ops->write_config(pdn, cap + PCI_EXP_SLTCTL, 2, val);
@@ -752,7 +727,7 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
 	/* Check link */
 	eeh_ops->read_config(pdn, cap + PCI_EXP_LNKCAP, 4, &val);
 	if (!(val & PCI_EXP_LNKCAP_DLLLARC)) {
-		pr_debug("  No link reporting capability (0x%08x) \n", val);
+		eeh_edev_dbg(edev, "No link reporting capability (0x%08x) \n", val);
 		msleep(1000);
 		return;
 	}
@@ -769,10 +744,10 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
 	}
 
 	if (val & PCI_EXP_LNKSTA_DLLLA)
-		pr_debug("  Link up (%s)\n",
+		eeh_edev_dbg(edev, "Link up (%s)\n",
 			 (val & PCI_EXP_LNKSTA_CLS_2_5GB) ? "2.5GB" : "5GB");
 	else
-		pr_debug("  Link not ready (0x%04x)\n", val);
+		eeh_edev_dbg(edev, "Link not ready (0x%04x)\n", val);
 }
 
 #define BYTE_SWAP(OFF)	(8*((OFF)/4)+3-(OFF))

arch/powerpc/platforms/powernv/eeh-powernv.c

@@ -44,7 +44,7 @@ void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
 	if (eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
-	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+	dev_dbg(&pdev->dev, "EEH: Setting up device\n");
 	eeh_add_device_early(pdn);
 	eeh_add_device_late(pdev);
 	eeh_sysfs_add_device(pdev);
@@ -370,10 +370,6 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	int ret;
 	int config_addr = (pdn->busno << 8) | (pdn->devfn);
 
-	pr_debug("%s: probing %04x:%02x:%02x.%01x\n",
-		__func__, hose->global_number, pdn->busno,
-		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
-
 	/*
 	 * When probing the root bridge, which doesn't have any
 	 * subordinate PCI devices. We don't have OF node for
@@ -387,6 +383,8 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
 		return NULL;
 
+	eeh_edev_dbg(edev, "Probing device\n");
+
 	/* Initialize eeh device */
 	edev->class_code = pdn->class_code;
 	edev->mode	&= 0xFFFFFF00;
@@ -412,9 +410,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	/* Create PE */
 	ret = eeh_add_to_parent_pe(edev);
 	if (ret) {
-		pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%x)\n",
-			__func__, hose->global_number, pdn->busno,
-			PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn), ret);
+		eeh_edev_warn(edev, "Failed to add device to PE (code %d)\n", ret);
 		return NULL;
 	}
 
@@ -472,10 +468,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	/* Save memory bars */
 	eeh_save_bars(edev);
 
-	pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%x-PE#%x\n",
-		__func__, pdn->busno, PCI_SLOT(pdn->devfn),
-		PCI_FUNC(pdn->devfn), edev->pe->phb->global_number,
-		edev->pe->addr);
+	eeh_edev_dbg(edev, "EEH enabled on device\n");
 
 	return NULL;
 }

arch/powerpc/platforms/pseries/eeh_pseries.c

@@ -49,7 +49,7 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 	if (eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
-	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+	dev_dbg(&pdev->dev, "EEH: Setting up device\n");
 #ifdef CONFIG_PCI_IOV
 	if (pdev->is_virtfn) {
 		struct pci_dn *physfn_pdn;
@@ -238,10 +238,6 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 	int enable = 0;
 	int ret;
 
-	pr_debug("%s: probing %04x:%02x:%02x.%01x\n",
-		__func__, pdn->phb->global_number, pdn->busno,
-		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
-
 	/* Retrieve OF node and eeh device */
 	edev = pdn_to_eeh_dev(pdn);
 	if (!edev || edev->pe)
@@ -255,6 +251,8 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
         if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
 		return NULL;
 
+	eeh_edev_dbg(edev, "Probing device\n");
+
 	/*
 	 * Update class code and mode of eeh device. We need
 	 * correctly reflects that current device is root port
@@ -284,12 +282,10 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 	pe.config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
 
 	/* Enable EEH on the device */
+	eeh_edev_dbg(edev, "Enabling EEH on device\n");
 	ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
 	if (ret) {
-		pr_debug("%s: EEH failed to enable on %02x:%02x.%01x PHB#%x-PE#%x (code %d)\n",
-			__func__, pdn->busno, PCI_SLOT(pdn->devfn),
-			PCI_FUNC(pdn->devfn), pe.phb->global_number,
-			pe.addr, ret);
+		eeh_edev_dbg(edev, "EEH failed to enable on device (code %d)\n", ret);
 	} else {
 		/* Retrieve PE address */
 		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
@@ -314,11 +310,8 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 			edev->pe_config_addr = pdn_to_eeh_dev(pdn->parent)->pe_config_addr;
 			eeh_add_to_parent_pe(edev);
 		}
-		pr_debug("%s: EEH %s on %02x:%02x.%01x PHB#%x-PE#%x (code %d)\n",
-			__func__, (enable ? "enabled" : "unsupported"),
-			pdn->busno, PCI_SLOT(pdn->devfn),
-			PCI_FUNC(pdn->devfn), pe.phb->global_number,
-			pe.addr, ret);
+		eeh_edev_dbg(edev, "EEH is %s on device (code %d)\n",
+			     (enable ? "enabled" : "unsupported"), ret);
 	}
 
 	/* Save memory bars */