Commit 20a63349 authored by Akihiro Tsukada's avatar Akihiro Tsukada Committed by Mauro Carvalho Chehab

media: dvb: earth-pt1: replace schedule_timeout with usleep_range

As described in Document/timers/timers-howto.txt,
hrtimer-based delay should be used for small sleeps.
Signed-off-by: default avatarAkihiro Tsukada <tskd08@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 41cb54e2
......@@ -18,7 +18,10 @@
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/sched/signal.h>
#include <linux/hrtimer.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
......@@ -321,7 +324,7 @@ static int pt1_unlock(struct pt1 *pt1)
for (i = 0; i < 3; i++) {
if (pt1_read_reg(pt1, 0) & 0x80000000)
return 0;
schedule_timeout_uninterruptible((HZ + 999) / 1000);
usleep_range(1000, 2000);
}
dev_err(&pt1->pdev->dev, "could not unlock\n");
return -EIO;
......@@ -335,7 +338,7 @@ static int pt1_reset_pci(struct pt1 *pt1)
for (i = 0; i < 10; i++) {
if (pt1_read_reg(pt1, 0) & 0x00000001)
return 0;
schedule_timeout_uninterruptible((HZ + 999) / 1000);
usleep_range(1000, 2000);
}
dev_err(&pt1->pdev->dev, "could not reset PCI\n");
return -EIO;
......@@ -349,7 +352,7 @@ static int pt1_reset_ram(struct pt1 *pt1)
for (i = 0; i < 10; i++) {
if (pt1_read_reg(pt1, 0) & 0x00000002)
return 0;
schedule_timeout_uninterruptible((HZ + 999) / 1000);
usleep_range(1000, 2000);
}
dev_err(&pt1->pdev->dev, "could not reset RAM\n");
return -EIO;
......@@ -366,7 +369,7 @@ static int pt1_do_enable_ram(struct pt1 *pt1)
if ((pt1_read_reg(pt1, 0) & 0x00000004) != status)
return 0;
}
schedule_timeout_uninterruptible((HZ + 999) / 1000);
usleep_range(1000, 2000);
}
dev_err(&pt1->pdev->dev, "could not enable RAM\n");
return -EIO;
......@@ -376,7 +379,7 @@ static int pt1_enable_ram(struct pt1 *pt1)
{
int i, ret;
int phase;
schedule_timeout_uninterruptible((HZ + 999) / 1000);
usleep_range(1000, 2000);
phase = pt1->pdev->device == 0x211a ? 128 : 166;
for (i = 0; i < phase; i++) {
ret = pt1_do_enable_ram(pt1);
......@@ -463,6 +466,9 @@ static int pt1_thread(void *data)
struct pt1_buffer_page *page;
bool was_frozen;
#define PT1_FETCH_DELAY 10
#define PT1_FETCH_DELAY_DELTA 2
pt1 = data;
set_freezable();
......@@ -476,7 +482,13 @@ static int pt1_thread(void *data)
page = pt1->tables[pt1->table_index].bufs[pt1->buf_index].page;
if (!pt1_filter(pt1, page)) {
schedule_timeout_interruptible((HZ + 999) / 1000);
ktime_t delay;
delay = PT1_FETCH_DELAY * NSEC_PER_MSEC;
set_current_state(TASK_INTERRUPTIBLE);
schedule_hrtimeout_range(&delay,
PT1_FETCH_DELAY_DELTA * NSEC_PER_MSEC,
HRTIMER_MODE_REL);
continue;
}
......@@ -712,7 +724,7 @@ pt1_update_power(struct pt1 *pt1)
adap = pt1->adaps[i];
switch (adap->voltage) {
case SEC_VOLTAGE_13: /* actually 11V */
bits |= 1 << 1;
bits |= 1 << 2;
break;
case SEC_VOLTAGE_18: /* actually 15V */
bits |= 1 << 1 | 1 << 2;
......@@ -766,7 +778,7 @@ static int pt1_wakeup(struct dvb_frontend *fe)
adap = container_of(fe->dvb, struct pt1_adapter, adap);
adap->sleep = 0;
pt1_update_power(adap->pt1);
schedule_timeout_uninterruptible((HZ + 999) / 1000);
usleep_range(1000, 2000);
ret = config_demod(adap->demod_i2c_client, adap->pt1->fe_clk);
if (ret == 0 && adap->orig_init)
......@@ -1073,7 +1085,7 @@ static int pt1_i2c_end(struct pt1 *pt1, int addr)
do {
if (signal_pending(current))
return -EINTR;
schedule_timeout_interruptible((HZ + 999) / 1000);
usleep_range(1000, 2000);
} while (pt1_read_reg(pt1, 0) & 0x00000080);
return 0;
}
......@@ -1376,11 +1388,11 @@ static int pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pt1->power = 1;
pt1_update_power(pt1);
schedule_timeout_uninterruptible((HZ + 49) / 50);
msleep(20);
pt1->reset = 0;
pt1_update_power(pt1);
schedule_timeout_uninterruptible((HZ + 999) / 1000);
usleep_range(1000, 2000);
ret = pt1_init_frontends(pt1);
if (ret < 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment