omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays

Previously, struct omap_hwmod_mpu_irqs arrays were unterminated; and
users of these arrays used the ARRAY_SIZE() macro to determine the
length of the array.  However, ARRAY_SIZE() only works when the array
is in the same scope as the macro user.

So far this hasn't been a problem.  However, to reduce duplicated
data, a subsequent patch will move common data to a separate, shared
file.  When this is done, ARRAY_SIZE() will no longer be usable.

This patch removes ARRAY_SIZE() usage for struct omap_hwmod_mpu_irqs
arrays and uses a sentinel value (irq == -1) as the array terminator
instead.
Signed-off-by: Paul Walmsley <paul@pwsan.com>

arch/arm/mach-omap2/omap_hwmod.c

@@ -678,6 +678,29 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
 		}
 }
 
+/**
+ * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
+ * @oh: struct omap_hwmod *oh
+ *
+ * Count and return the number of MPU IRQs associated with the hwmod
+ * @oh.  Used to allocate struct resource data.  Returns 0 if @oh is
+ * NULL.
+ */
+static int _count_mpu_irqs(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_irq_info *ohii;
+	int i = 0;
+
+	if (!oh || !oh->mpu_irqs)
+		return 0;
+
+	do {
+		ohii = &oh->mpu_irqs[i++];
+	} while (ohii->irq != -1);
+
+	return i;
+}
+
 /**
  * _count_ocp_if_addr_spaces - count the number of address space entries for @oh
  * @oh: struct omap_hwmod *oh
@@ -1964,7 +1987,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh)
 {
 	int ret, i;
 
-	ret = oh->mpu_irqs_cnt + oh->sdma_reqs_cnt;
+	ret = _count_mpu_irqs(oh) + oh->sdma_reqs_cnt;
 
 	for (i = 0; i < oh->slaves_cnt; i++)
 		ret += _count_ocp_if_addr_spaces(oh->slaves[i]);
@@ -1984,12 +2007,13 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh)
  */
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 {
-	int i, j;
+	int i, j, mpu_irqs_cnt;
 	int r = 0;
 
 	/* For each IRQ, DMA, memory area, fill in array.*/
 
-	for (i = 0; i < oh->mpu_irqs_cnt; i++) {
+	mpu_irqs_cnt = _count_mpu_irqs(oh);
+	for (i = 0; i < mpu_irqs_cnt; i++) {
 		(res + r)->name = (oh->mpu_irqs + i)->name;
 		(res + r)->start = (oh->mpu_irqs + i)->irq;
 		(res + r)->end = (oh->mpu_irqs + i)->irq;

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -98,7 +98,7 @@ struct omap_hwmod_mux_info {
 /**
  * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
  * @name: name of the IRQ channel (module local name)
- * @irq_ch: IRQ channel ID
+ * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
  *
  * @name should be something short, e.g., "tx" or "rx".  It is for use
  * by platform_get_resource_byname().  It is defined locally to the
@@ -106,7 +106,7 @@ struct omap_hwmod_mux_info {
  */
 struct omap_hwmod_irq_info {
 	const char	*name;
-	u16		irq;
+	s16		irq;
 };
 
 /**
@@ -466,7 +466,7 @@ struct omap_hwmod_class {
  * @name: name of the hwmod
  * @class: struct omap_hwmod_class * to the class of this hwmod
  * @od: struct omap_device currently associated with this hwmod (internal use)
- * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
+ * @mpu_irqs: ptr to an array of MPU IRQs
  * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt)
  * @prcm: PRCM data pertaining to this hwmod
  * @main_clk: main clock: OMAP clock name
@@ -480,7 +480,6 @@ struct omap_hwmod_class {
  * @_sysc_cache: internal-use hwmod flags
  * @_mpu_rt_va: cached register target start address (internal use)
  * @_mpu_port_index: cached MPU register target slave ID (internal use)
- * @mpu_irqs_cnt: number of @mpu_irqs
  * @sdma_reqs_cnt: number of @sdma_reqs
  * @opt_clks_cnt: number of @opt_clks
  * @master_cnt: number of @master entries
@@ -529,7 +528,6 @@ struct omap_hwmod {
 	u16				flags;
 	u8				_mpu_port_index;
 	u8				response_lat;
-	u8				mpu_irqs_cnt;
 	u8				sdma_reqs_cnt;
 	u8				rst_lines_cnt;
 	u8				opt_clks_cnt;