net: mscc: ocelot: split assignment of the cpu port into a separate function

Now that the places that configure routing destinations for the CPU port
have been marked as such, allow callers to specify their own CPU port
that is different than ocelot->num_phys_ports. A user will be the Felix
DSA driver, where the CPU port is one of the physical ports (NPI mode).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mscc/ocelot.c

@@ -380,12 +380,6 @@ static void ocelot_vlan_init(struct ocelot *ocelot)
 	ocelot->vlan_mask[0] = GENMASK(ocelot->num_phys_ports - 1, 0);
 	ocelot_vlant_set_mask(ocelot, 0, ocelot->vlan_mask[0]);
 
-	/* Configure the CPU port to be VLAN aware */
-	ocelot_write_gix(ocelot, ANA_PORT_VLAN_CFG_VLAN_VID(0) |
-				 ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
-				 ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1),
-			 ANA_PORT_VLAN_CFG, ocelot->num_phys_ports);
-
 	/* Set vlan ingress filter mask to all ports but the CPU port by
 	 * default.
 	 */
@@ -2224,11 +2218,52 @@ int ocelot_probe_port(struct ocelot *ocelot, u8 port,
 }
 EXPORT_SYMBOL(ocelot_probe_port);
 
+void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu,
+			 enum ocelot_tag_prefix injection,
+			 enum ocelot_tag_prefix extraction)
+{
+	/* Configure and enable the CPU port. */
+	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, cpu);
+	ocelot_write_rix(ocelot, BIT(cpu), ANA_PGID_PGID, PGID_CPU);
+	ocelot_write_gix(ocelot, ANA_PORT_PORT_CFG_RECV_ENA |
+			 ANA_PORT_PORT_CFG_PORTID_VAL(cpu),
+			 ANA_PORT_PORT_CFG, cpu);
+
+	/* If the CPU port is a physical port, set up the port in Node
+	 * Processor Interface (NPI) mode. This is the mode through which
+	 * frames can be injected from and extracted to an external CPU.
+	 * Only one port can be an NPI at the same time.
+	 */
+	if (cpu < ocelot->num_phys_ports) {
+		ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
+			     QSYS_EXT_CPU_CFG_EXT_CPU_PORT(cpu),
+			     QSYS_EXT_CPU_CFG);
+	}
+
+	/* CPU port Injection/Extraction configuration */
+	ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
+			 QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
+			 QSYS_SWITCH_PORT_MODE_PORT_ENA,
+			 QSYS_SWITCH_PORT_MODE, cpu);
+	ocelot_write_rix(ocelot, SYS_PORT_MODE_INCL_XTR_HDR(extraction) |
+			 SYS_PORT_MODE_INCL_INJ_HDR(injection),
+			 SYS_PORT_MODE, cpu);
+
+	/* Configure the CPU port to be VLAN aware */
+	ocelot_write_gix(ocelot, ANA_PORT_VLAN_CFG_VLAN_VID(0) |
+				 ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
+				 ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1),
+			 ANA_PORT_VLAN_CFG, cpu);
+
+	ocelot->cpu = cpu;
+}
+EXPORT_SYMBOL(ocelot_set_cpu_port);
+
 int ocelot_init(struct ocelot *ocelot)
 {
-	u32 port;
-	int i, ret, cpu = ocelot->num_phys_ports;
 	char queue_name[32];
+	int i, ret;
+	u32 port;
 
 	ocelot->lags = devm_kcalloc(ocelot->dev, ocelot->num_phys_ports,
 				    sizeof(u32), GFP_KERNEL);
@@ -2308,13 +2343,6 @@ int ocelot_init(struct ocelot *ocelot)
 		ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_SRC + port);
 	}
 
-	/* Configure and enable the CPU port. */
-	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, cpu);
-	ocelot_write_rix(ocelot, BIT(cpu), ANA_PGID_PGID, PGID_CPU);
-	ocelot_write_gix(ocelot, ANA_PORT_PORT_CFG_RECV_ENA |
-			 ANA_PORT_PORT_CFG_PORTID_VAL(cpu),
-			 ANA_PORT_PORT_CFG, cpu);
-
 	/* Allow broadcast MAC frames. */
 	for (i = ocelot->num_phys_ports + 1; i < PGID_CPU; i++) {
 		u32 val = ANA_PGID_PGID_PGID(GENMASK(ocelot->num_phys_ports - 1, 0));
@@ -2327,13 +2355,6 @@ int ocelot_init(struct ocelot *ocelot)
 	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_MCIPV4);
 	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_MCIPV6);
 
-	/* CPU port Injection/Extraction configuration */
-	ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
-			 QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
-			 QSYS_SWITCH_PORT_MODE_PORT_ENA,
-			 QSYS_SWITCH_PORT_MODE, cpu);
-	ocelot_write_rix(ocelot, SYS_PORT_MODE_INCL_XTR_HDR(1) |
-			 SYS_PORT_MODE_INCL_INJ_HDR(1), SYS_PORT_MODE, cpu);
 	/* Allow manual injection via DEVCPU_QS registers, and byte swap these
 	 * registers endianness.
 	 */

drivers/net/ethernet/mscc/ocelot.h

@@ -427,6 +427,13 @@ struct ocelot_multicast {
 	u16 ports;
 };
 
+enum ocelot_tag_prefix {
+	OCELOT_TAG_PREFIX_DISABLED	= 0,
+	OCELOT_TAG_PREFIX_NONE,
+	OCELOT_TAG_PREFIX_SHORT,
+	OCELOT_TAG_PREFIX_LONG,
+};
+
 struct ocelot_port;
 
 struct ocelot_stat_layout {
@@ -455,6 +462,7 @@ struct ocelot {
 
 	u8 num_phys_ports;
 	u8 num_cpu_ports;
+	u8 cpu;
 	struct ocelot_port **ports;
 
 	u32 *lags;
@@ -552,6 +560,10 @@ int ocelot_probe_port(struct ocelot *ocelot, u8 port,
 		      void __iomem *regs,
 		      struct phy_device *phy);
 
+void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu,
+			 enum ocelot_tag_prefix injection,
+			 enum ocelot_tag_prefix extraction);
+
 extern struct notifier_block ocelot_netdevice_nb;
 extern struct notifier_block ocelot_switchdev_nb;
 extern struct notifier_block ocelot_switchdev_blocking_nb;

drivers/net/ethernet/mscc/ocelot_board.c

@@ -365,6 +365,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 				     sizeof(struct ocelot_port *), GFP_KERNEL);
 
 	ocelot_init(ocelot);
+	ocelot_set_cpu_port(ocelot, ocelot->num_phys_ports,
+			    OCELOT_TAG_PREFIX_NONE, OCELOT_TAG_PREFIX_NONE);
 
 	for_each_available_child_of_node(ports, portnp) {
 		struct ocelot_port_private *priv;