Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (68 commits)
  [MIPS] remove Documentation/mips/GT64120.README
  [MIPS] Malta: remaining bits of the board support code cleanup
  [MIPS] Malta: make the helper function static
  [MIPS] Malta: fix braces at single statement blocks
  [MIPS] Malta, Atlas: move an extern function declaration to the header file
  [MIPS] Malta: Use C89 style for comments
  [MIPS] Malta: else should follow close brace in malta_int.c
  [MIPS] Malta: remove a superfluous comment
  [MIPS] Malta: include <linux/cpu.h> instead of <asm/cpu.h>
  [MIPS] Malta, Atlas, Sead: remove an extern from .c files
  [MIPS] Malta: fix oversized lines in malta_int.c
  [MIPS] Malta: remove a dead function declaration
  [MIPS] Malta: use tabs not spaces
  [MIPS] Malta: set up the screen info in a separate function
  [MIPS] Malta: check the PCI clock frequency in a separate function
  [MIPS] Malta: use the KERN_ facility level in printk()
  [MIPS] Malta: use Linux kernel style for structure initialization
  [MIPS]: constify function pointer tables
  [MIPS] compat: handle argument endianess of sys32_(f)truncate64 with merge_64
  [MIPS] Cobalt 64-bits kernels can be safely unmarked experimental
  ...

Documentation/mips/00-INDEX

@@ -2,5 +2,3 @@
 	- this file.
 AU1xxx_IDE.README
 	- README for MIPS AU1XXX IDE driver.
-GT64120.README
-	- README for dir with info on MIPS boards using GT-64120 or GT-64120A.

Documentation/mips/GT64120.README

-README for arch/mips/gt64120 directory and subdirectories
-
-Jun Sun, jsun@mvista.com or jsun@junsun.net
-01/27, 2001
-
-MOTIVATION
-----------
-
-Many MIPS boards share the same system controller (or CPU companian chip),
-such as GT-64120.  It is highly desirable to let these boards share
-the same controller code instead of duplicating them.
-
-This directory is meant to hold all MIPS boards that use GT-64120 or GT-64120A.
-
-
-HOW TO ADD A BOARD
-------------------
- 
-. Create a subdirectory include/asm/gt64120/<board>.  
-
-. Create a file called gt64120_dep.h under that directory.
-
-. Modify include/asm/gt64120/gt64120.h file to include the new gt64120_dep.h
-  based on config options.  The board-dep section is at the end of 
-  include/asm/gt64120/gt64120.h file. There you can find all required
-  definitions include/asm/gt64120/<board>/gt64120_dep.h file must supply.
-
-. Create a subdirectory arch/mips/gt64120/<board> directory to hold
-  board specific routines.
-
-. The GT-64120 common code is supplied under arch/mips/gt64120/common directory.
-  It includes:
-	1) arch/mips/gt64120/pci.c -
-		common PCI routine, include the top-level pcibios_init()
-	2) arch/mips/gt64120/irq.c -
-		common IRQ routine, include the top-level do_IRQ() 
-	   [This part really belongs to arch/mips/kernel. jsun]
- 	3) arch/mips/gt64120/gt_irq.c -
-		common IRQ routines for GT-64120 chip.  Currently it only handles
-	 	the timer interrupt.
-
-. Board-specific routines are supplied under arch/mips/gt64120/<board> dir.
-	1) arch/mips/gt64120/<board>/pci.c - it provides bus fixup routine
-	2) arch/mips/gt64120/<board>/irq.c - it provides enable/disable irqs
-		and board irq setup routine (irq_setup)
-	3) arch/mips/gt64120/<board>/int-handler.S -
-		The first-level interrupt dispatching routine.
-	4) a bunch of other "normal" stuff (setup, prom, dbg_io, reset, etc)
-
-. Follow other "normal" procedure to modify configuration files, etc.
-
-
-TO-DO LIST
-----------
-
-. Expand arch/mips/gt64120/gt_irq.c to handle all GT-64120 interrupts.
-  We probably need to introduce GT_IRQ_BASE  in board-dep header file,
-  which is used the starting irq_nr for all GT irqs.
-
-  A function, gt64120_handle_irq(), will be added so that the first-level
-  irq dispatcher will call this function if it detects an interrupt
-  from GT-64120.
-
-. More support for GT-64120 PCI features (2nd PCI bus, perhaps)
-

arch/mips/Kconfig

@@ -37,16 +37,6 @@ config BASLER_EXCITE
 	  The eXcite is a smart camera platform manufactured by
 	  Basler Vision Technologies AG.
 
-config BASLER_EXCITE_PROTOTYPE
-	bool "Support for pre-release units"
-	depends on BASLER_EXCITE
-	default n
-	help
-	  Pre-series (prototype) units are different from later ones in
-	  some ways. Select this option if you have one of these. Please
-	  note that a kernel built with this option selected will not be
-	  able to run on normal units.
-
 config BCM47XX
 	bool "BCM47XX based boards"
 	select CEVT_R4K
@@ -82,7 +72,7 @@ config MIPS_COBALT
 	select SYS_HAS_CPU_NEVADA
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
@@ -91,6 +81,9 @@ config MACH_DECSTATION
 	select BOOT_ELF32
 	select CEVT_R4K
 	select CSRC_R4K
+	select CPU_DADDI_WORKAROUNDS if 64BIT
+	select CPU_R4000_WORKAROUNDS if 64BIT
+	select CPU_R4400_WORKAROUNDS if 64BIT
 	select DMA_NONCOHERENT
 	select NO_IOPORT
 	select IRQ_CPU
@@ -124,12 +117,12 @@ config MACH_JAZZ
 	select ARCH_MAY_HAVE_PC_FDC
 	select CEVT_R4K
 	select CSRC_R4K
+	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
 	select GENERIC_ISA_DMA
 	select IRQ_CPU
 	select I8253
 	select I8259
 	select ISA
-	select PCSPEAKER
 	select SYS_HAS_CPU_R4X00
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
@@ -187,6 +180,7 @@ config LEMOTE_FULONG
 config MIPS_ATLAS
 	bool "MIPS Atlas board"
 	select BOOT_ELF32
+	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
@@ -219,6 +213,7 @@ config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
+	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
@@ -364,35 +359,6 @@ config PMC_YOSEMITE
 	  Yosemite is an evaluation board for the RM9000x2 processor
 	  manufactured by PMC-Sierra.
 
-config QEMU
-	bool "Qemu"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_COHERENT
-	select GENERIC_ISA_DMA
-	select HAVE_STD_PC_SERIAL_PORT
-	select I8253
-	select I8259
-	select IRQ_CPU
-	select ISA
-	select PCSPEAKER
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select NR_CPUS_DEFAULT_1
-	select SYS_SUPPORTS_SMP
-	help
-	  Qemu is a software emulator which among other architectures also
-	  can simulate a MIPS32 4Kc system.  This patch adds support for the
-	  system architecture that currently is being simulated by Qemu.  It
-	  will eventually be removed again when Qemu has the capability to
-	  simulate actual MIPS hardware platforms.  More information on Qemu
-	  can be found at http://www.linux-mips.org/wiki/Qemu.
-
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
 	select ARC
@@ -400,6 +366,7 @@ config SGI_IP22
 	select BOOT_ELF32
 	select CEVT_R4K
 	select CSRC_R4K
+	select DEFAULT_SGI_PARTITION
 	select DMA_NONCOHERENT
 	select HW_HAS_EISA
 	select I8253
@@ -407,6 +374,12 @@ config SGI_IP22
 	select IP22_CPU_SCACHE
 	select IRQ_CPU
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select SGI_HAS_DS1286
+	select SGI_HAS_I8042
+	select SGI_HAS_INDYDOG
+	select SGI_HAS_SEEQ
+	select SGI_HAS_WD93
+	select SGI_HAS_ZILOG
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
@@ -424,6 +397,7 @@ config SGI_IP27
 	select ARC
 	select ARC64
 	select BOOT_ELF64
+	select DEFAULT_SGI_PARTITION
 	select DMA_IP27
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
@@ -440,6 +414,36 @@ config SGI_IP27
 	  workstations.  To compile a Linux kernel that runs on these, say Y
 	  here.
 
+config SGI_IP28
+	bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select ARC
+	select ARC64
+	select BOOT_ELF64
+	select CEVT_R4K
+	select CSRC_R4K
+	select DEFAULT_SGI_PARTITION
+	select DMA_NONCOHERENT
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select IRQ_CPU
+	select HW_HAS_EISA
+	select I8253
+	select I8259
+	select SGI_HAS_DS1286
+	select SGI_HAS_I8042
+	select SGI_HAS_INDYDOG
+	select SGI_HAS_SEEQ
+	select SGI_HAS_WD93
+	select SGI_HAS_ZILOG
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_R10000
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+      help
+        This is the SGI Indigo2 with R10000 processor.  To compile a Linux
+        kernel that runs on these, say Y here.
+
 config SGI_IP32
 	bool "SGI IP32 (O2)"
 	select ARC
@@ -545,19 +549,6 @@ config SIBYTE_SENTOSA
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config SIBYTE_PTSWARM
-	bool "Sibyte BCM91250PT-PTSWARM"
-	depends on EXPERIMENTAL
-	select BOOT_ELF32
-	select DMA_COHERENT
-	select NR_CPUS_DEFAULT_2
-	select SIBYTE_SB1250
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_SB1
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
@@ -575,10 +566,12 @@ config SNI_RM
 	bool "SNI RM200/300/400"
 	select ARC if CPU_LITTLE_ENDIAN
 	select ARC32 if CPU_LITTLE_ENDIAN
+	select SNIPROM if CPU_BIG_ENDIAN
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select CEVT_R4K
 	select CSRC_R4K
+	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select HW_HAS_EISA
@@ -587,7 +580,6 @@ config SNI_RM
 	select I8253
 	select I8259
 	select ISA
-	select PCSPEAKER
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
@@ -690,6 +682,7 @@ config WR_PPMC
 endchoice
 
 source "arch/mips/au1000/Kconfig"
+source "arch/mips/basler/excite/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
@@ -797,10 +790,6 @@ config DMA_COHERENT
 config DMA_IP27
 	bool
 
-config DMA_IP32
-	bool
-	select DMA_NEED_PCI_MAP_STATE
-
 config DMA_NONCOHERENT
 	bool
 	select DMA_NEED_PCI_MAP_STATE
@@ -956,16 +945,40 @@ config EMMA2RH
 config SERIAL_RM9000
 	bool
 
+config SGI_HAS_DS1286
+	bool
+
+config SGI_HAS_INDYDOG
+	bool
+
+config SGI_HAS_SEEQ
+	bool
+
+config SGI_HAS_WD93
+	bool
+
+config SGI_HAS_ZILOG
+	bool
+
+config SGI_HAS_I8042
+	bool
+
+config DEFAULT_SGI_PARTITION
+	bool
+
 config ARC32
 	bool
 
+config SNIPROM
+	bool
+
 config BOOT_ELF32
 	bool
 
 config MIPS_L1_CACHE_SHIFT
 	int
 	default "4" if MACH_DECSTATION
-	default "7" if SGI_IP27 || SNI_RM
+	default "7" if SGI_IP27 || SGI_IP28 || SNI_RM
 	default "4" if PMC_MSP4200_EVAL
 	default "5"
 
@@ -974,7 +987,7 @@ config HAVE_STD_PC_SERIAL_PORT
 
 config ARC_CONSOLE
 	bool "ARC console support"
-	depends on SGI_IP22 || (SNI_RM && CPU_LITTLE_ENDIAN)
+	depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN)
 
 config ARC_MEMORY
 	bool
@@ -983,7 +996,7 @@ config ARC_MEMORY
 
 config ARC_PROMLIB
 	bool
-	depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP32
+	depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32
 	default y
 
 config ARC64
@@ -1443,7 +1456,9 @@ config MIPS_MT_SMP
 	select MIPS_MT
 	select NR_CPUS_DEFAULT_2
 	select SMP
+	select SYS_SUPPORTS_SCHED_SMT if SMP
 	select SYS_SUPPORTS_SMP
+	select SMP_UP
 	help
 	  This is a kernel model which is also known a VSMP or lately
 	  has been marketesed into SMVP.
@@ -1460,6 +1475,7 @@ config MIPS_MT_SMTC
 	select NR_CPUS_DEFAULT_8
 	select SMP
 	select SYS_SUPPORTS_SMP
+	select SMP_UP
 	help
 	  This is a kernel model which is known a SMTC or lately has been
 	  marketesed into SMVP.
@@ -1469,6 +1485,19 @@ endchoice
 config MIPS_MT
 	bool
 
+config SCHED_SMT
+	bool "SMT (multithreading) scheduler support"
+	depends on SYS_SUPPORTS_SCHED_SMT
+	default n
+	help
+	  SMT scheduler support improves the CPU scheduler's decision making
+	  when dealing with MIPS MT enabled cores at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
+config SYS_SUPPORTS_SCHED_SMT
+	bool
+
+
 config SYS_SUPPORTS_MULTITHREADING
 	bool
 
@@ -1589,15 +1618,6 @@ config CPU_HAS_SMARTMIPS
 config CPU_HAS_WB
 	bool
 
-config 64BIT_CONTEXT
-	bool "Save 64bit integer registers"
-	depends on 32BIT && CPU_LOONGSON2
-	help
-	  Loongson2 CPU is 64bit , when used in 32BIT mode, its integer
-	  registers can still be accessed as 64bit, mainly for multimedia
-	  instructions. We must have all 64bit save/restored to make sure
-	  those instructions to get correct result.
-
 #
 # Vectored interrupt mode is an R2 feature
 #
@@ -1618,6 +1638,19 @@ config CPU_HAS_SYNC
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
 
+#
+# CPU non-features
+#
+config CPU_DADDI_WORKAROUNDS
+	bool
+
+config CPU_R4000_WORKAROUNDS
+	bool
+	select CPU_R4400_WORKAROUNDS
+
+config CPU_R4400_WORKAROUNDS
+	bool
+
 #
 # Use the generic interrupt handling code in kernel/irq/:
 #
@@ -1721,6 +1754,9 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config SMP_UP
+	bool
+
 config SYS_SUPPORTS_SMP
 	bool
 
@@ -1978,9 +2014,6 @@ config MMU
 config I8253
 	bool
 
-config PCSPEAKER
-	bool
-
 config ZONE_DMA32
 	bool
 

arch/mips/Makefile

@@ -141,6 +141,10 @@ cflags-$(CONFIG_CPU_R8000)	+= -march=r8000 -Wa,--trap
 cflags-$(CONFIG_CPU_R10000)	+= $(call cc-option,-march=r10000,-march=r8000) \
 			-Wa,--trap
 
+cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
+cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
+cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
+
 ifdef CONFIG_CPU_SB1
 ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
 MODFLAGS	+= -msb1-pass1-workarounds
@@ -152,6 +156,8 @@ endif
 #
 libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/
 libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
+libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
+libs-y				+= arch/mips/fw/lib/
 libs-$(CONFIG_SIBYTE_CFE)	+= arch/mips/sibyte/cfe/
 
 #
@@ -308,7 +314,7 @@ core-$(CONFIG_MIPS_ATLAS)	+= arch/mips/mips-boards/atlas/
 cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-atlas
 cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-mips
 load-$(CONFIG_MIPS_ATLAS)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_ATLAS)	:= vmlinux.srec
+all-$(CONFIG_MIPS_ATLAS)	:= vmlinux.bin
 
 #
 # MIPS Malta board
@@ -316,7 +322,7 @@ all-$(CONFIG_MIPS_ATLAS)	:= vmlinux.srec
 core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mips-boards/malta/
 cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-mips
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_MALTA)	:= vmlinux.srec
+all-$(CONFIG_MIPS_MALTA)	:= vmlinux.bin
 
 #
 # MIPS SEAD board
@@ -348,14 +354,6 @@ core-$(CONFIG_PMC_YOSEMITE)	+= arch/mips/pmc-sierra/yosemite/
 cflags-$(CONFIG_PMC_YOSEMITE)	+= -Iinclude/asm-mips/mach-yosemite
 load-$(CONFIG_PMC_YOSEMITE)	+= 0xffffffff80100000
 
-#
-# Qemu simulating MIPS32 4Kc
-#
-core-$(CONFIG_QEMU)		+= arch/mips/qemu/
-cflags-$(CONFIG_QEMU)		+= -Iinclude/asm-mips/mach-qemu
-load-$(CONFIG_QEMU)		+= 0xffffffff80010000
-all-$(CONFIG_QEMU)		:= vmlinux.bin
-
 #
 # Basler eXcite
 #
@@ -474,6 +472,20 @@ OBJCOPYFLAGS			:= --change-addresses=0x57ffffff80000000
 endif
 endif
 
+#
+# SGI IP28 (Indigo2 R10k)
+#
+# Set the load address to >= 0xa800000020080000 if you want to leave space for
+# symmon, 0xa800000020004000 for production kernels ?  Note that the value must
+# be 16kb aligned or the handling of the current variable will break.
+# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
+#
+#core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o
+core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
+cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
+#cflags-$(CONFIG_SGI_IP28)	+= -Iinclude/asm-mips/mach-ip28
+load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
+
 #
 # SGI-IP32 (O2)
 #
@@ -602,9 +614,11 @@ ifdef CONFIG_64BIT
     endif
   endif
 
-  ifeq ($(KBUILD_SYM32), y)
-    ifeq ($(call cc-option-yn,-msym32), y)
-      cflags-y += -msym32 -DKBUILD_64BIT_SYM32
+  ifeq ($(KBUILD_SYM32)$(call cc-option-yn,-msym32), yy)
+    cflags-y += -msym32 -DKBUILD_64BIT_SYM32
+  else
+    ifeq ($(CONFIG_CPU_DADDI_WORKAROUNDS), y)
+      $(error CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32)
     endif
   endif
 endif

arch/mips/au1000/common/au1xxx_irqmap.c

@@ -25,27 +25,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
+#include <linux/kernel.h>
 
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/mach-au1x00/au1000.h>
+#include <au1000.h>
 
 /* The IC0 interrupt table.  This is processor, rather than
  * board dependent, so no reason to keep this info in the board

arch/mips/au1000/common/dbdma.c

@@ -179,7 +179,7 @@ static dbdev_tab_t dbdev_tab[] = {
 	{ 0, 0, 0, 0, 0, 0, 0 },
 };
 
-#define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t))
+#define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
 static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
 

arch/mips/au1000/db1x00/init.c

@@ -57,17 +57,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	/* Set the platform # */
-#if	defined(CONFIG_MIPS_DB1550)
-	mips_machtype = MACH_DB1550;
-#elif	defined(CONFIG_MIPS_DB1500)
-	mips_machtype = MACH_DB1500;
-#elif	defined(CONFIG_MIPS_DB1100)
-	mips_machtype = MACH_DB1100;
-#else
-	mips_machtype = MACH_DB1000;
-#endif
-
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");

arch/mips/au1000/mtx-1/init.c

@@ -54,8 +54,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_MTX1;	/* set the platform # */
-
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");

arch/mips/au1000/mtx-1/platform.c

@@ -22,9 +22,32 @@
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 
 #include <asm/gpio.h>
 
+static struct gpio_keys_button mtx1_gpio_button[] = {
+	{
+		.gpio = 207,
+		.code = BTN_0,
+		.desc = "System button",
+	}
+};
+
+static struct gpio_keys_platform_data mtx1_buttons_data = {
+	.buttons = mtx1_gpio_button,
+	.nbuttons = ARRAY_SIZE(mtx1_gpio_button),
+};
+
+static struct platform_device mtx1_button = {
+	.name = "gpio-keys",
+	.id = -1,
+	.dev = {
+		.platform_data = &mtx1_buttons_data,
+	}
+};
+
 static struct resource mtx1_wdt_res[] = {
 	[0] = {
 		.start	= 15,
@@ -66,11 +89,13 @@ static struct platform_device mtx1_gpio_leds = {
 
 static struct __initdata platform_device * mtx1_devs[] = {
 	&mtx1_gpio_leds,
-	&mtx1_wdt
+	&mtx1_wdt,
+	&mtx1_button
 };
 
 static int __init mtx1_register_devices(void)
 {
+	gpio_direction_input(207);
 	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
 }
 

arch/mips/au1000/pb1000/init.c

@@ -52,8 +52,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_PB1000;
-
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {

arch/mips/au1000/pb1100/init.c

@@ -53,8 +53,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg3;
 
-	mips_machtype = MACH_PB1100;
-
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");

arch/mips/au1000/pb1200/init.c

@@ -53,8 +53,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_PB1200;
-
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {

arch/mips/au1000/pb1500/init.c

@@ -53,8 +53,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_PB1500;
-
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {

arch/mips/au1000/pb1550/init.c

@@ -53,8 +53,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_PB1550;
-
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {

arch/mips/au1000/xxs1500/init.c

@@ -52,8 +52,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_XXS1500;	/* set the platform # */
-
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");

arch/mips/basler/excite/Kconfig

+config BASLER_EXCITE_PROTOTYPE
+	bool "Support for pre-release units"
+	depends on BASLER_EXCITE
+	default n
+	help
+	  Pre-series (prototype) units are different from later ones in
+	  some ways. Select this option if you have one of these. Please
+	  note that a kernel built with this option selected will not be
+	  able to run on normal units.

arch/mips/basler/excite/excite_iodev.c

@@ -48,7 +48,7 @@ static DECLARE_WAIT_QUEUE_HEAD(wq);
 
 
 
-static struct file_operations fops =
+static const struct file_operations fops =
 {
 	.owner		= THIS_MODULE,
 	.open		= iodev_open,

arch/mips/basler/excite/excite_prom.c

@@ -135,8 +135,6 @@ void __init prom_init(void)
 #ifdef CONFIG_64BIT
 #	error 64 bit support not implemented
 #endif /* CONFIG_64BIT */
-
-	mips_machtype = MACH_TITAN_EXCITE;
 }
 
 /* This is called from free_initmem(), so we need to provide it */

arch/mips/cobalt/reset.c

@@ -10,9 +10,10 @@
  */
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/jiffies.h>
 #include <linux/leds.h>
 
+#include <asm/processor.h>
+
 #include <cobalt.h>
 
 #define RESET_PORT	((void __iomem *)CKSEG1ADDR(0x1c000000))
@@ -29,28 +30,15 @@ device_initcall(ledtrig_power_off_init);
 
 void cobalt_machine_halt(void)
 {
-	int state, last, diff;
-	unsigned long mark;
-
 	/*
 	 * turn on power off LED on RaQ
-	 *
-	 * restart if ENTER and SELECT are pressed
 	 */
-
-	last = COBALT_KEY_PORT;
-
 	led_trigger_event(power_off_led_trigger, LED_FULL);
 
-	for (state = 0;;) {
-		diff = COBALT_KEY_PORT ^ last;
-		last ^= diff;
-
-		if((diff & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)) && !(~last & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)))
-			writeb(RESET, RESET_PORT);
-
-		for (mark = jiffies; jiffies - mark < HZ;)
-			;
+	local_irq_disable();
+	while (1) {
+		if (cpu_wait)
+			cpu_wait();
 	}
 }
 

arch/mips/configs/atlas_defconfig

@@ -37,7 +37,6 @@ CONFIG_MIPS_ATLAS=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_MIPS_ATLAS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/bigsur_defconfig

@@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_SIBYTE_BIGSUR=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/capcella_defconfig

@@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/cobalt_defconfig

@@ -24,7 +24,6 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/db1000_defconfig

@@ -38,7 +38,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/db1100_defconfig

@@ -38,7 +38,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/db1200_defconfig

@@ -38,7 +38,6 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/db1500_defconfig

@@ -38,7 +38,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/db1550_defconfig

@@ -38,7 +38,6 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/decstation_defconfig

@@ -37,7 +37,6 @@ CONFIG_MACH_DECSTATION=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_MACH_DECSTATION=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/e55_defconfig

@@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/emma2rh_defconfig

@@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 CONFIG_MARKEINS=y
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_MARKEINS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/excite_defconfig

@@ -38,7 +38,6 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/fulong_defconfig

@@ -23,7 +23,6 @@ CONFIG_LEMOTE_FULONG=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -33,7 +32,6 @@ CONFIG_LEMOTE_FULONG=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/ip22_defconfig

@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -36,7 +35,6 @@ CONFIG_SGI_IP22=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/ip27_defconfig

@@ -24,7 +24,6 @@ CONFIG_MIPS=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 CONFIG_SGI_IP27=y
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_SGI_IP27=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/ip32_defconfig

@@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_SGI_IP32=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/jazz_defconfig

@@ -37,7 +37,6 @@ CONFIG_MACH_JAZZ=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_MACH_JAZZ=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/jmr3927_defconfig

@@ -24,7 +24,6 @@ CONFIG_MIPS=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 CONFIG_TOSHIBA_JMR3927=y
@@ -464,7 +462,6 @@ CONFIG_SERIAL_TXX9_STDSERIAL=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_R3964 is not set
@@ -482,6 +479,20 @@ CONFIG_DEVPORT=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_TXX9_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Multifunction device drivers

arch/mips/configs/lasat_defconfig

@@ -25,7 +25,6 @@ CONFIG_LASAT=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -36,7 +35,6 @@ CONFIG_LASAT=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/malta_defconfig

@@ -25,7 +25,6 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -36,7 +35,6 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/mipssim_defconfig

@@ -26,7 +26,6 @@ CONFIG_MIPS_SIM=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -37,7 +36,6 @@ CONFIG_MIPS_SIM=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/mpc30x_defconfig

@@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/msp71xx_defconfig

@@ -38,7 +38,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MACH_VR41XX is not set
 CONFIG_PMC_MSP=y
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_PMC_MSP=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/mtx1_defconfig

@@ -24,7 +24,6 @@ CONFIG_MACH_ALCHEMY=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MACH_ALCHEMY=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
@@ -1617,6 +1615,7 @@ CONFIG_INPUT_EVBUG=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
 CONFIG_KEYBOARD_XTKBD=m

arch/mips/configs/pb1100_defconfig

@@ -38,7 +38,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/pb1500_defconfig

@@ -38,7 +38,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/pb1550_defconfig

@@ -38,7 +38,6 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -48,7 +47,6 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/pnx8550-jbs_defconfig

@@ -37,7 +37,6 @@ CONFIG_PNX8550_JBS=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_PNX8550_JBS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/pnx8550-stb810_defconfig

@@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y
 CONFIG_PNX8550_STB810=y
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_PNX8550_STB810=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/qemu_defconfig

@@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-CONFIG_QEMU=y
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_QEMU=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/rbhma4200_defconfig

@@ -24,7 +24,6 @@ CONFIG_MIPS=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
@@ -431,7 +429,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_R3964 is not set
@@ -449,6 +446,20 @@ CONFIG_DEVPORT=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_TXX9_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Multifunction device drivers

arch/mips/configs/rbhma4500_defconfig

@@ -24,7 +24,6 @@ CONFIG_MIPS=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
@@ -450,7 +448,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_R3964 is not set
@@ -479,6 +476,20 @@ CONFIG_SPI_AT25=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_TXX9_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Multifunction device drivers

arch/mips/configs/rm200_defconfig

@@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/sb1250-swarm_defconfig

@@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_SIBYTE_SWARM=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/sead_defconfig

@@ -37,7 +37,6 @@ CONFIG_MIPS_SEAD=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_MIPS_SEAD=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/tb0219_defconfig

@@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/tb0226_defconfig

@@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/tb0287_defconfig

@@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/workpad_defconfig

@@ -24,7 +24,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -35,7 +34,6 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/configs/wrppmc_defconfig

@@ -37,7 +37,6 @@ CONFIG_WR_PPMC=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_WR_PPMC=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/configs/yosemite_defconfig

@@ -37,7 +37,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 CONFIG_PMC_YOSEMITE=y
-# CONFIG_QEMU is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
@@ -47,7 +46,6 @@ CONFIG_PMC_YOSEMITE=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set

arch/mips/dec/time.c

@@ -161,7 +161,6 @@ static cycle_t dec_ioasic_hpt_read(void)
 
 void __init plat_time_init(void)
 {
-	mips_timer_state = dec_timer_state;
 	mips_timer_ack = dec_timer_ack;
 
 	if (!cpu_has_counter && IOASIC)

arch/mips/defconfig

@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
 CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -36,7 +35,6 @@ CONFIG_SGI_IP22=y
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_PTSWARM is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set

arch/mips/fw/arc/cmdline.c

@@ -52,7 +52,7 @@ static char * __init move_firmware_args(char* cp)
 				strcat(cp, used_arc[i][1]);
 				cp += strlen(used_arc[i][1]);
 				/* ... and now the argument */
-				s = strstr(prom_argv(actr), "=");
+				s = strchr(prom_argv(actr), '=');
 				if (s) {
 					s++;
 					strcpy(cp, s);

arch/mips/fw/arc/init.c

@@ -12,6 +12,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/sgialib.h>
+#include <asm/smp-ops.h>
 
 #undef DEBUG_PROM_INIT
 
@@ -48,4 +49,11 @@ void __init prom_init(void)
 	ArcRead(0, &c, 1, &cnt);
 	ArcEnterInteractiveMode();
 #endif
+#ifdef CONFIG_SGI_IP27
+	{
+		extern struct plat_smp_ops ip27_smp_ops;
+
+		register_smp_ops(&ip27_smp_ops);
+	}
+#endif
 }

arch/mips/fw/cfe/cfe_api_int.h

@@ -15,28 +15,12 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
-
-/*  *********************************************************************
-    *
-    *  Broadcom Common Firmware Environment (CFE)
-    *
-    *  Device function prototypes		File: cfe_api_int.h
-    *
-    *  This header defines all internal types and macros for the
-    *  library.  This is stuff that's not exported to an app
-    *  using the library.
-    *
-    *  Authors:  Mitch Lichtenberg, Chris Demetriou
-    *
-    ********************************************************************* */
-
 #ifndef CFE_API_INT_H
 #define CFE_API_INT_H
 
-/*  *********************************************************************
-    *  Constants
-    ********************************************************************* */
-
+/*
+ * Constants.
+ */
 #define CFE_CMD_FW_GETINFO	0
 #define CFE_CMD_FW_RESTART	1
 #define CFE_CMD_FW_BOOT		2
@@ -64,89 +48,101 @@
 
 #define CFE_CMD_VENDOR_USE	0x8000	/* codes above this are for customer use */
 
-/*  *********************************************************************
-    *  Structures
-    ********************************************************************* */
+/*
+ * Structures.
+ */
 
-typedef uint64_t cfe_xuint_t;
-typedef int64_t cfe_xint_t;
-typedef int64_t cfe_xptr_t;
+/* eeek, signed "pointers" */
+typedef s64 cfe_xptr_t;
 
-typedef struct xiocb_buffer_s {
-	cfe_xuint_t buf_offset;		/* offset on device (bytes) */
+struct xiocb_buffer {
+	u64 buf_offset;		/* offset on device (bytes) */
 	cfe_xptr_t  buf_ptr;		/* pointer to a buffer */
-	cfe_xuint_t buf_length;		/* length of this buffer */
-	cfe_xuint_t buf_retlen;		/* returned length (for read ops) */
-	cfe_xuint_t buf_ioctlcmd;	/* IOCTL command (used only for IOCTLs) */
-} xiocb_buffer_t;
-
-#define buf_devflags buf_ioctlcmd	/* returned device info flags */
+	u64 buf_length;		/* length of this buffer */
+	u64 buf_retlen;		/* returned length (for read ops) */
+	u64 buf_ioctlcmd;	/* IOCTL command (used only for IOCTLs) */
+};
 
-typedef struct xiocb_inpstat_s {
-	cfe_xuint_t inp_status;		/* 1 means input available */
-} xiocb_inpstat_t;
+struct xiocb_inpstat {
+	u64 inp_status;		/* 1 means input available */
+};
 
-typedef struct xiocb_envbuf_s {
-	cfe_xint_t enum_idx;		/* 0-based enumeration index */
+struct xiocb_envbuf {
+	s64 enum_idx;		/* 0-based enumeration index */
 	cfe_xptr_t name_ptr;		/* name string buffer */
-	cfe_xint_t name_length;		/* size of name buffer */
+	s64 name_length;		/* size of name buffer */
 	cfe_xptr_t val_ptr;		/* value string buffer */
-	cfe_xint_t val_length;		/* size of value string buffer */
-} xiocb_envbuf_t;
-
-typedef struct xiocb_cpuctl_s {
-	cfe_xuint_t cpu_number;		/* cpu number to control */
-	cfe_xuint_t cpu_command;	/* command to issue to CPU */
-	cfe_xuint_t start_addr;		/* CPU start address */
-	cfe_xuint_t gp_val;		/* starting GP value */
-	cfe_xuint_t sp_val;		/* starting SP value */
-	cfe_xuint_t a1_val;		/* starting A1 value */
-} xiocb_cpuctl_t;
-
-typedef struct xiocb_time_s {
-	cfe_xint_t ticks;		/* current time in ticks */
-} xiocb_time_t;
-
-typedef struct xiocb_exitstat_s {
-	cfe_xint_t status;
-} xiocb_exitstat_t;
-
-typedef struct xiocb_meminfo_s {
-	cfe_xint_t mi_idx;		/* 0-based enumeration index */
-	cfe_xint_t mi_type;		/* type of memory block */
-	cfe_xuint_t mi_addr;		/* physical start address */
-	cfe_xuint_t mi_size;		/* block size */
-} xiocb_meminfo_t;
-
-typedef struct xiocb_fwinfo_s {
-	cfe_xint_t fwi_version;		/* major, minor, eco version */
-	cfe_xint_t fwi_totalmem;	/* total installed mem */
-	cfe_xint_t fwi_flags;		/* various flags */
-	cfe_xint_t fwi_boardid;		/* board ID */
-	cfe_xint_t fwi_bootarea_va;	/* VA of boot area */
-	cfe_xint_t fwi_bootarea_pa;	/* PA of boot area */
-	cfe_xint_t fwi_bootarea_size;	/* size of boot area */
-	cfe_xint_t fwi_reserved1;
-	cfe_xint_t fwi_reserved2;
-	cfe_xint_t fwi_reserved3;
-} xiocb_fwinfo_t;
-
-typedef struct cfe_xiocb_s {
-	cfe_xuint_t xiocb_fcode;	/* IOCB function code */
-	cfe_xint_t xiocb_status;	/* return status */
-	cfe_xint_t xiocb_handle;	/* file/device handle */
-	cfe_xuint_t xiocb_flags;	/* flags for this IOCB */
-	cfe_xuint_t xiocb_psize;	/* size of parameter list */
+	s64 val_length;		/* size of value string buffer */
+};
+
+struct xiocb_cpuctl {
+	u64 cpu_number;		/* cpu number to control */
+	u64 cpu_command;	/* command to issue to CPU */
+	u64 start_addr;		/* CPU start address */
+	u64 gp_val;		/* starting GP value */
+	u64 sp_val;		/* starting SP value */
+	u64 a1_val;		/* starting A1 value */
+};
+
+struct xiocb_time {
+	s64 ticks;		/* current time in ticks */
+};
+
+struct xiocb_exitstat{
+	s64 status;
+};
+
+struct xiocb_meminfo {
+	s64 mi_idx;		/* 0-based enumeration index */
+	s64 mi_type;		/* type of memory block */
+	u64 mi_addr;		/* physical start address */
+	u64 mi_size;		/* block size */
+};
+
+struct xiocb_fwinfo {
+	s64 fwi_version;		/* major, minor, eco version */
+	s64 fwi_totalmem;	/* total installed mem */
+	s64 fwi_flags;		/* various flags */
+	s64 fwi_boardid;		/* board ID */
+	s64 fwi_bootarea_va;	/* VA of boot area */
+	s64 fwi_bootarea_pa;	/* PA of boot area */
+	s64 fwi_bootarea_size;	/* size of boot area */
+	s64 fwi_reserved1;
+	s64 fwi_reserved2;
+	s64 fwi_reserved3;
+};
+
+struct cfe_xiocb {
+	u64 xiocb_fcode;	/* IOCB function code */
+	s64 xiocb_status;	/* return status */
+	s64 xiocb_handle;	/* file/device handle */
+	u64 xiocb_flags;	/* flags for this IOCB */
+	u64 xiocb_psize;	/* size of parameter list */
 	union {
-		xiocb_buffer_t xiocb_buffer;	/* buffer parameters */
-		xiocb_inpstat_t xiocb_inpstat;	/* input status parameters */
-		xiocb_envbuf_t xiocb_envbuf;	/* environment function parameters */
-		xiocb_cpuctl_t xiocb_cpuctl;	/* CPU control parameters */
-		xiocb_time_t xiocb_time;	/* timer parameters */
-		xiocb_meminfo_t xiocb_meminfo;	/* memory arena info parameters */
-		xiocb_fwinfo_t xiocb_fwinfo;	/* firmware information */
-		xiocb_exitstat_t xiocb_exitstat;	/* Exit Status */
+		/* buffer parameters */
+		struct xiocb_buffer xiocb_buffer;
+
+		/* input status parameters */
+		struct xiocb_inpstat xiocb_inpstat;
+
+		/* environment function parameters */
+		struct xiocb_envbuf xiocb_envbuf;
+
+		/* CPU control parameters */
+		struct xiocb_cpuctl xiocb_cpuctl;
+
+		/* timer parameters */
+		struct xiocb_time xiocb_time;
+
+		/* memory arena info parameters */
+		struct xiocb_meminfo xiocb_meminfo;
+
+		/* firmware information */
+		struct xiocb_fwinfo xiocb_fwinfo;
+
+		/* Exit Status */
+		struct xiocb_exitstat xiocb_exitstat;
 	} plist;
-} cfe_xiocb_t;
+};
 
-#endif				/* CFE_API_INT_H */
+#endif /* CFE_API_INT_H */

arch/mips/fw/lib/Makefile

+#
+# Makefile for generic prom monitor library routines under Linux.
+#
+
+lib-$(CONFIG_64BIT)	+= call_o32.o

arch/mips/fw/lib/call_o32.S

+/*
+ *	arch/mips/dec/prom/call_o32.S
+ *
+ *	O32 interface for the 64 (or N32) ABI.
+ *
+ *	Copyright (C) 2002  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+/* Maximum number of arguments supported.  Must be even!  */
+#define O32_ARGC	32
+/* Number of static registers we save.  */
+#define O32_STATC	11
+/* Frame size for static register  */
+#define O32_FRAMESZ	(SZREG * O32_STATC)
+/* Frame size on new stack */
+#define O32_FRAMESZ_NEW (SZREG + 4 * O32_ARGC)
+
+		.text
+
+/*
+ * O32 function call dispatcher, for interfacing 32-bit ROM routines.
+ *
+ * The standard 64 (N32) calling sequence is supported, with a0
+ * holding a function pointer, a1 a new stack pointer, a2-a7 -- its
+ * first six arguments and the stack -- remaining ones (up to O32_ARGC,
+ * including a2-a7). Static registers, gp and fp are preserved, v0 holds
+ * a result. This code relies on the called o32 function for sp and ra
+ * restoration and this dispatcher has to be placed in a KSEGx (or KUSEG)
+ * address space.  Any pointers passed have to point to addresses within
+ * one of these spaces as well.
+ */
+NESTED(call_o32, O32_FRAMESZ, ra)
+		REG_SUBU	sp,O32_FRAMESZ
+
+		REG_S		ra,O32_FRAMESZ-1*SZREG(sp)
+		REG_S		fp,O32_FRAMESZ-2*SZREG(sp)
+		REG_S		gp,O32_FRAMESZ-3*SZREG(sp)
+		REG_S		s7,O32_FRAMESZ-4*SZREG(sp)
+		REG_S		s6,O32_FRAMESZ-5*SZREG(sp)
+		REG_S		s5,O32_FRAMESZ-6*SZREG(sp)
+		REG_S		s4,O32_FRAMESZ-7*SZREG(sp)
+		REG_S		s3,O32_FRAMESZ-8*SZREG(sp)
+		REG_S		s2,O32_FRAMESZ-9*SZREG(sp)
+		REG_S		s1,O32_FRAMESZ-10*SZREG(sp)
+		REG_S		s0,O32_FRAMESZ-11*SZREG(sp)
+
+		move		jp,a0
+		REG_SUBU	s0,a1,O32_FRAMESZ_NEW
+		REG_S		sp,O32_FRAMESZ_NEW-1*SZREG(s0)
+
+		sll		a0,a2,zero
+		sll		a1,a3,zero
+		sll		a2,a4,zero
+		sll		a3,a5,zero
+		sw		a6,0x10(s0)
+		sw		a7,0x14(s0)
+
+		PTR_LA		t0,O32_FRAMESZ(sp)
+		PTR_LA		t1,0x18(s0)
+		li		t2,O32_ARGC-6
+1:
+		lw		t3,(t0)
+		REG_ADDU	t0,SZREG
+		sw		t3,(t1)
+		REG_SUBU	t2,1
+		REG_ADDU	t1,4
+		bnez		t2,1b
+
+		move		sp,s0
+
+		jalr		jp
+
+		REG_L		sp,O32_FRAMESZ_NEW-1*SZREG(sp)
+
+		REG_L		s0,O32_FRAMESZ-11*SZREG(sp)
+		REG_L		s1,O32_FRAMESZ-10*SZREG(sp)
+		REG_L		s2,O32_FRAMESZ-9*SZREG(sp)
+		REG_L		s3,O32_FRAMESZ-8*SZREG(sp)
+		REG_L		s4,O32_FRAMESZ-7*SZREG(sp)
+		REG_L		s5,O32_FRAMESZ-6*SZREG(sp)
+		REG_L		s6,O32_FRAMESZ-5*SZREG(sp)
+		REG_L		s7,O32_FRAMESZ-4*SZREG(sp)
+		REG_L		gp,O32_FRAMESZ-3*SZREG(sp)
+		REG_L		fp,O32_FRAMESZ-2*SZREG(sp)
+		REG_L		ra,O32_FRAMESZ-1*SZREG(sp)
+
+		REG_ADDU	sp,O32_FRAMESZ
+		jr		ra
+END(call_o32)

arch/mips/fw/sni/Makefile

+#
+# Makefile for the SNI prom monitor routines under Linux.
+#
+
+lib-$(CONFIG_SNIPROM)	+= sniprom.o

arch/mips/sni/sniprom.c → arch/mips/fw/sni/sniprom.c

@@ -9,8 +9,6 @@
  * Copyright (C) 2005-2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
  */
 
-#define DEBUG
-
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/string.h>
@@ -30,24 +28,60 @@
  * registers
  */
 #define PROM_GET_MEMCONF	58
+#define PROM_GET_HWCONF         61
 
 #define PROM_VEC		(u64 *)CKSEG1ADDR(0x1fc00000)
 #define PROM_ENTRY(x)		(PROM_VEC + (x))
 
+#define ___prom_putchar         ((int *(*)(int))PROM_ENTRY(PROM_PUTCHAR))
+#define ___prom_getenv          ((char *(*)(char *))PROM_ENTRY(PROM_GETENV))
+#define ___prom_get_memconf     ((void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF))
+#define ___prom_get_hwconf      ((u32 (*)(void))PROM_ENTRY(PROM_GET_HWCONF))
+
+#ifdef CONFIG_64BIT
+
+static u8 o32_stk[16384];
+#define O32_STK   &o32_stk[sizeof(o32_stk)]
+
+#define __PROM_O32(fun, arg) fun arg __asm__(#fun); \
+				     __asm__(#fun " = call_o32")
+
+int   __PROM_O32(__prom_putchar, (int *(*)(int), void *, int));
+char *__PROM_O32(__prom_getenv, (char *(*)(char *), void *, char *));
+void  __PROM_O32(__prom_get_memconf, (void (*)(void *), void *, void *));
+u32   __PROM_O32(__prom_get_hwconf, (u32 (*)(void), void *));
 
-static int *(*__prom_putchar)(int)        = (int *(*)(int))PROM_ENTRY(PROM_PUTCHAR);
+#define _prom_putchar(x)     __prom_putchar(___prom_putchar, O32_STK, x)
+#define _prom_getenv(x)      __prom_getenv(___prom_getenv, O32_STK, x)
+#define _prom_get_memconf(x) __prom_get_memconf(___prom_get_memconf, O32_STK, x)
+#define _prom_get_hwconf()   __prom_get_hwconf(___prom_get_hwconf, O32_STK)
+
+#else
+#define _prom_putchar(x)     ___prom_putchar(x)
+#define _prom_getenv(x)      ___prom_getenv(x)
+#define _prom_get_memconf(x) ___prom_get_memconf(x)
+#define _prom_get_hwconf(x)  ___prom_get_hwconf(x)
+#endif
 
 void prom_putchar(char c)
 {
-	__prom_putchar(c);
+	_prom_putchar(c);
 }
 
-static char *(*__prom_getenv)(char *)     = (char *(*)(char *))PROM_ENTRY(PROM_GETENV);
-static void (*__prom_get_memconf)(void *) = (void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF);
 
 char *prom_getenv(char *s)
 {
-	return __prom_getenv(s);
+	return _prom_getenv(s);
+}
+
+void *prom_get_hwconf(void)
+{
+	u32 hwconf = _prom_get_hwconf();
+
+	if (hwconf == 0xffffffff)
+		return NULL;
+
+	return (void *)CKSEG1ADDR(hwconf);
 }
 
 void __init prom_free_prom_memory(void)
@@ -58,194 +92,60 @@ void __init prom_free_prom_memory(void)
  * /proc/cpuinfo system type
  *
  */
-static const char *systype = "Unknown";
+char *system_type = "Unknown";
 const char *get_system_type(void)
 {
-	return systype;
-}
-
-#define SNI_IDPROM_BASE                0xbff00000
-#define SNI_IDPROM_MEMSIZE             (SNI_IDPROM_BASE+0x28)  /* Memsize in 16MB quantities */
-#define SNI_IDPROM_BRDTYPE             (SNI_IDPROM_BASE+0x29)  /* Board Type */
-#define SNI_IDPROM_CPUTYPE             (SNI_IDPROM_BASE+0x30)  /* CPU Type */
-
-#define SNI_IDPROM_SIZE	0x1000
-
-#ifdef DEBUG
-static void __init sni_idprom_dump(void)
-{
-	int	i;
-
-	pr_debug("SNI IDProm dump:\n");
-	for (i = 0; i < 256; i++) {
-		if (i%16 == 0)
-			pr_debug("%04x ", i);
-
-		printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i));
-
-		if (i % 16 == 15)
-			printk("\n");
-	}
+	return system_type;
 }
-#endif
 
-static void __init sni_mem_init(void )
+static void __init sni_mem_init(void)
 {
 	int i, memsize;
 	struct membank {
-	        u32		size;
-	        u32		base;
-	        u32		size2;
-	        u32		pad1;
-	        u32		pad2;
+		u32		size;
+		u32		base;
+		u32		size2;
+		u32		pad1;
+		u32		pad2;
 	} memconf[8];
+	int brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE;
+
 
 	/* MemSIZE from prom in 16MByte chunks */
 	memsize = *((unsigned char *) SNI_IDPROM_MEMSIZE) * 16;
 
-	pr_debug("IDProm memsize: %lu MByte\n", memsize);
+	pr_debug("IDProm memsize: %u MByte\n", memsize);
 
 	/* get memory bank layout from prom */
-	__prom_get_memconf(&memconf);
+	_prom_get_memconf(&memconf);
 
 	pr_debug("prom_get_mem_conf memory configuration:\n");
-	for (i = 0;i < 8 && memconf[i].size; i++) {
-		if (sni_brd_type == SNI_BRD_PCI_TOWER ||
-		    sni_brd_type == SNI_BRD_PCI_TOWER_CPLUS) {
+	for (i = 0; i < 8 && memconf[i].size; i++) {
+		if (brd_type == SNI_BRD_PCI_TOWER ||
+		    brd_type == SNI_BRD_PCI_TOWER_CPLUS) {
 			if (memconf[i].base >= 0x20000000 &&
-			    memconf[i].base <  0x30000000) {
+			    memconf[i].base <  0x30000000)
 				memconf[i].base -= 0x20000000;
-			}
-	}
+		}
 		pr_debug("Bank%d: %08x @ %08x\n", i,
 			memconf[i].size, memconf[i].base);
-		add_memory_region(memconf[i].base, memconf[i].size, BOOT_MEM_RAM);
-	}
-}
-
-static void __init sni_console_setup(void)
-{
-	char *ctype;
-	char *cdev;
-	char *baud;
-	int port;
-	static char options[8];
-
-	cdev = prom_getenv("console_dev");
-	if (strncmp (cdev, "tty", 3) == 0) {
-		ctype = prom_getenv("console");
-		switch (*ctype) {
-		default:
-		case 'l':
-	                port = 0;
-	                baud = prom_getenv("lbaud");
-	                break;
-		case 'r':
-	                port = 1;
-	                baud = prom_getenv("rbaud");
-	                break;
-		}
-		if (baud)
-			strcpy(options, baud);
-		if (strncmp (cdev, "tty552", 6) == 0)
-			add_preferred_console("ttyS", port, baud ? options : NULL);
-		else
-			add_preferred_console("ttySC", port, baud ? options : NULL);
+		add_memory_region(memconf[i].base, memconf[i].size,
+				  BOOT_MEM_RAM);
 	}
 }
 
 void __init prom_init(void)
 {
 	int argc = fw_arg0;
-	char **argv = (void *)fw_arg1;
+	u32 *argv = (u32 *)CKSEG0ADDR(fw_arg1);
 	int i;
-	int cputype;
-
-	sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE;
-	cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE;
-	switch (sni_brd_type) {
-	case SNI_BRD_TOWER_OASIC:
-	        switch (cputype) {
-		case SNI_CPU_M8030:
-		        systype = "RM400-330";
-		        break;
-		case SNI_CPU_M8031:
-		        systype = "RM400-430";
-		        break;
-		case SNI_CPU_M8037:
-		        systype = "RM400-530";
-		        break;
-		case SNI_CPU_M8034:
-		        systype = "RM400-730";
-		        break;
-		default:
-			systype = "RM400-xxx";
-			break;
-		}
-	        break;
-	case SNI_BRD_MINITOWER:
-	        switch (cputype) {
-		case SNI_CPU_M8021:
-		case SNI_CPU_M8043:
-		        systype = "RM400-120";
-		        break;
-		case SNI_CPU_M8040:
-		        systype = "RM400-220";
-		        break;
-		case SNI_CPU_M8053:
-		        systype = "RM400-225";
-		        break;
-		case SNI_CPU_M8050:
-		        systype = "RM400-420";
-		        break;
-		default:
-			systype = "RM400-xxx";
-			break;
-		}
-	        break;
-	case SNI_BRD_PCI_TOWER:
-	        systype = "RM400-Cxx";
-	        break;
-	case SNI_BRD_RM200:
-	        systype = "RM200-xxx";
-	        break;
-	case SNI_BRD_PCI_MTOWER:
-	        systype = "RM300-Cxx";
-	        break;
-	case SNI_BRD_PCI_DESKTOP:
-	        switch (read_c0_prid() & 0xff00) {
-		case PRID_IMP_R4600:
-		case PRID_IMP_R4700:
-		        systype = "RM200-C20";
-		        break;
-		case PRID_IMP_R5000:
-		        systype = "RM200-C40";
-		        break;
-		default:
-		        systype = "RM200-Cxx";
-		        break;
-		}
-	        break;
-	case SNI_BRD_PCI_TOWER_CPLUS:
-	        systype = "RM400-Exx";
-	        break;
-	case SNI_BRD_PCI_MTOWER_CPLUS:
-	        systype = "RM300-Exx";
-	        break;
-	}
-	pr_debug("Found SNI brdtype %02x name %s\n", sni_brd_type, systype);
 
-#ifdef DEBUG
-	sni_idprom_dump();
-#endif
 	sni_mem_init();
-	sni_console_setup();
 
 	/* copy prom cmdline parameters to kernel cmdline */
 	for (i = 1; i < argc; i++) {
-		strcat(arcs_cmdline, argv[i]);
+		strcat(arcs_cmdline, (char *)CKSEG0ADDR(argv[i]));
 		if (i < (argc - 1))
 			strcat(arcs_cmdline, " ");
 	}
 }
-

arch/mips/gt64120/wrppmc/setup.c

@@ -121,8 +121,6 @@ const char *get_system_type(void)
  */
 void __init prom_init(void)
 {
-	mips_machtype = MACH_WRPPMC;
-
 	add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM);
 	add_memory_region(WRPPMC_BOOTROM_BASE, WRPPMC_BOOTROM_SIZE, BOOT_MEM_ROM_DATA);
 

arch/mips/jazz/setup.c

@@ -200,12 +200,19 @@ static struct platform_device jazz_cmos_pdev = {
 	.resource       = jazz_cmos_rsrc
 };
 
+static struct platform_device pcspeaker_pdev = {
+	.name           = "pcspkr",
+	.id		= -1,
+};
+
 static int __init jazz_setup_devinit(void)
 {
 	platform_device_register(&jazz_serial8250_device);
 	platform_device_register(&jazz_esp_pdev);
 	platform_device_register(&jazz_sonic_pdev);
 	platform_device_register(&jazz_cmos_pdev);
+	platform_device_register(&pcspeaker_pdev);
+
 	return 0;
 }
 

arch/mips/jmr3927/rbhma3100/init.c

@@ -52,10 +52,6 @@ void __init prom_init(void)
 		puts("Warning: TX3927 TLB off\n");
 #endif
 
-#ifdef CONFIG_TOSHIBA_JMR3927
-	mips_machtype = MACH_TOSHIBA_JMR3927;
-#endif
-
 	prom_init_cmdline();
 	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
 }

arch/mips/jmr3927/rbhma3100/setup.c

@@ -29,21 +29,17 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/kdev_t.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/ide.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #ifdef CONFIG_SERIAL_TXX9
-#include <linux/tty.h>
-#include <linux/serial.h>
 #include <linux/serial_core.h>
 #endif
 
-#include <asm/addrspace.h>
 #include <asm/txx9tmr.h>
 #include <asm/reboot.h>
 #include <asm/jmr3927/jmr3927.h>
@@ -238,6 +234,8 @@ static void __init tx3927_setup(void)
 	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
 	/* Disable PCI snoop */
 	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+	/* do reset on watchdog */
+	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
 
 #ifdef DO_WRITE_THROUGH
 	/* Enable PCI SNOOP - with write through only */
@@ -388,3 +386,55 @@ static int __init jmr3927_rtc_init(void)
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 device_initcall(jmr3927_rtc_init);
+
+/* Watchdog support */
+
+static int __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("txx9wdt", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static int __init jmr3927_wdt_init(void)
+{
+	return txx9_wdt_init(TX3927_TMR_REG(2));
+}
+device_initcall(jmr3927_wdt_init);
+
+/* Minimum CLK support */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "imbus_clk"))
+		return (struct clk *)JMR3927_IMCLK;
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return (unsigned long)clk;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);

arch/mips/kernel/cpu-bugs64.c

@@ -18,6 +18,15 @@
 #include <asm/mipsregs.h>
 #include <asm/system.h>
 
+static char bug64hit[] __initdata =
+	"reliable operation impossible!\n%s";
+static char nowar[] __initdata =
+	"Please report to <linux-mips@linux-mips.org>.";
+static char r4kwar[] __initdata =
+	"Enable CPU_R4000_WORKAROUNDS to rectify.";
+static char daddiwar[] __initdata =
+	"Enable CPU_DADDI_WORKAROUNDS to rectify.";
+
 static inline void align_mod(const int align, const int mod)
 {
 	asm volatile(
@@ -155,13 +164,7 @@ static inline void check_mult_sh(void)
 	}
 
 	printk("no.\n");
-	panic("Reliable operation impossible!\n"
-#ifndef CONFIG_CPU_R4000
-	      "Configure for R4000 to enable the workaround."
-#else
-	      "Please report to <linux-mips@linux-mips.org>."
-#endif
-	      );
+	panic(bug64hit, !R4000_WAR ? r4kwar : nowar);
 }
 
 static volatile int daddi_ov __initdata = 0;
@@ -233,15 +236,11 @@ static inline void check_daddi(void)
 	}
 
 	printk("no.\n");
-	panic("Reliable operation impossible!\n"
-#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
-	      "Configure for R4000 or R4400 to enable the workaround."
-#else
-	      "Please report to <linux-mips@linux-mips.org>."
-#endif
-	      );
+	panic(bug64hit, !DADDI_WAR ? daddiwar : nowar);
 }
 
+int daddiu_bug __initdata = -1;
+
 static inline void check_daddiu(void)
 {
 	long v, w, tmp;
@@ -281,7 +280,9 @@ static inline void check_daddiu(void)
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
 		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 
-	if (v == w) {
+	daddiu_bug = v != w;
+
+	if (!daddiu_bug) {
 		printk("no.\n");
 		return;
 	}
@@ -303,18 +304,16 @@ static inline void check_daddiu(void)
 	}
 
 	printk("no.\n");
-	panic("Reliable operation impossible!\n"
-#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
-	      "Configure for R4000 or R4400 to enable the workaround."
-#else
-	      "Please report to <linux-mips@linux-mips.org>."
-#endif
-	      );
+	panic(bug64hit, !DADDI_WAR ? daddiwar : nowar);
 }
 
-void __init check_bugs64(void)
+void __init check_bugs64_early(void)
 {
 	check_mult_sh();
-	check_daddi();
 	check_daddiu();
 }
+
+void __init check_bugs64(void)
+{
+	check_daddi();
+}

arch/mips/kernel/cpu-probe.c

@@ -188,6 +188,8 @@ static inline void check_wait(void)
 	case CPU_AU1500:
 	case CPU_AU1550:
 	case CPU_AU1200:
+	case CPU_AU1210:
+	case CPU_AU1250:
 		if (allow_au1k_wait)
 			cpu_wait = au1k_wait;
 		break;
@@ -733,6 +735,11 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
 			break;
 		case 4:
 			c->cputype = CPU_AU1200;
+			if (2 == (c->processor_id & 0xff))
+				c->cputype = CPU_AU1250;
+			break;
+		case 5:
+			c->cputype = CPU_AU1210;
 			break;
 		default:
 			panic("Unknown Au Core!");
@@ -858,6 +865,8 @@ static __init const char *cpu_to_name(struct cpuinfo_mips *c)
 	case CPU_AU1100:	name = "Au1100"; break;
 	case CPU_AU1550:	name = "Au1550"; break;
 	case CPU_AU1200:	name = "Au1200"; break;
+	case CPU_AU1210:	name = "Au1210"; break;
+	case CPU_AU1250:	name = "Au1250"; break;
 	case CPU_4KEC:		name = "MIPS 4KEc"; break;
 	case CPU_4KSC:		name = "MIPS 4KSc"; break;
 	case CPU_VR41XX:	name = "NEC Vr41xx"; break;

arch/mips/kernel/genex.S

@@ -6,7 +6,7 @@
  * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2001 MIPS Technologies, Inc.
- * Copyright (C) 2002 Maciej W. Rozycki
+ * Copyright (C) 2002, 2007  Maciej W. Rozycki
  */
 #include <linux/init.h>
 
@@ -471,7 +471,13 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	jr	k0
 	 rfe
 #else
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
 	LONG_ADDIU	k0, 4		/* stall on $k0 */
+#else
+	.set	at=v1
+	LONG_ADDIU	k0, 4
+	.set	noat
+#endif
 	MTC0	k0, CP0_EPC
 	/* I hope three instructions between MTC0 and ERET are enough... */
 	ori	k1, _THREAD_MASK

arch/mips/kernel/kspd.c

@@ -161,8 +161,7 @@ static unsigned int translate_open_flags(int flags)
 	int i;
 	unsigned int ret = 0;
 
-	for (i = 0; i < (sizeof(open_flags_table) / sizeof(struct apsp_table));
-	     i++) {
+	for (i = 0; i < ARRAY_SIZE(open_flags_table); i++) {
 		if( (flags & open_flags_table[i].sp) ) {
 			ret |= open_flags_table[i].ap;
 		}

arch/mips/kernel/linux32.c

@@ -174,36 +174,16 @@ struct rlimit32 {
 	int	rlim_max;
 };
 
-#ifdef __MIPSEB__
-asmlinkage long sys32_truncate64(const char __user * path, unsigned long __dummy,
-	int length_hi, int length_lo)
-#endif
-#ifdef __MIPSEL__
-asmlinkage long sys32_truncate64(const char __user * path, unsigned long __dummy,
-	int length_lo, int length_hi)
-#endif
+asmlinkage long sys32_truncate64(const char __user * path,
+	unsigned long __dummy, int a2, int a3)
 {
-	loff_t length;
-
-	length = ((unsigned long) length_hi << 32) | (unsigned int) length_lo;
-
-	return sys_truncate(path, length);
+	return sys_truncate(path, merge_64(a2, a3));
 }
 
-#ifdef __MIPSEB__
 asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
-	int length_hi, int length_lo)
-#endif
-#ifdef __MIPSEL__
-asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
-	int length_lo, int length_hi)
-#endif
+	int a2, int a3)
 {
-	loff_t length;
-
-	length = ((unsigned long) length_hi << 32) | (unsigned int) length_lo;
-
-	return sys_ftruncate(fd, length);
+	return sys_ftruncate(fd, merge_64(a2, a3));
 }
 
 static inline long

arch/mips/kernel/mips-mt.c

@@ -17,7 +17,6 @@
 #include <asm/system.h>
 #include <asm/hardirq.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #include <asm/mipsmtregs.h>
 #include <asm/r4kcache.h>
 #include <asm/cacheflush.h>

arch/mips/kernel/pcspeaker.c

-/*
- * Copyright (C) 2006 IBM Corporation
- *
- * Implements device information for i8253 timer chip
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation
- */
-
-#include <linux/platform_device.h>
-
-static __init int add_pcspkr(void)
-{
-	struct platform_device *pd;
-	int ret;
-
-	pd = platform_device_alloc("pcspkr", -1);
-	if (!pd)
-		return -ENOMEM;
-
-	ret = platform_device_add(pd);
-	if (ret)
-		platform_device_put(pd);
-
-	return ret;
-}
-device_initcall(add_pcspkr);

arch/mips/kernel/proc.c

@@ -62,6 +62,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		);
 	seq_printf(m, "shadow register sets\t: %d\n",
 		       cpu_data[n].srsets);
+	seq_printf(m, "core\t\t\t: %d\n", cpu_data[n].core);
 
 	sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
 	        cpu_has_vce ? "%u" : "not available");
@@ -89,7 +90,7 @@ static void c_stop(struct seq_file *m, void *v)
 {
 }
 
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
 	.start	= c_start,
 	.next	= c_next,
 	.stop	= c_stop,

arch/mips/kernel/rtlx.c

@@ -40,7 +40,6 @@
 #include <asm/atomic.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
-#include <asm/mips_mt.h>
 #include <asm/system.h>
 #include <asm/vpe.h>
 #include <asm/rtlx.h>

arch/mips/kernel/setup.c

@@ -8,7 +8,7 @@
  * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03  Ralf Baechle
  * Copyright (C) 1996 Stoned Elipot
  * Copyright (C) 1999 Silicon Graphics, Inc.
- * Copyright (C) 2000 2001, 2002  Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2007  Maciej W. Rozycki
  */
 #include <linux/init.h>
 #include <linux/ioport.h>
@@ -24,10 +24,12 @@
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
+#include <asm/bugs.h>
 #include <asm/cache.h>
 #include <asm/cpu.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
+#include <asm/smp-ops.h>
 #include <asm/system.h>
 
 struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
@@ -561,6 +563,7 @@ void __init setup_arch(char **cmdline_p)
 	}
 #endif
 	cpu_report();
+	check_bugs_early();
 
 #if defined(CONFIG_VT)
 #if defined(CONFIG_VGA_CONSOLE)
@@ -573,9 +576,7 @@ void __init setup_arch(char **cmdline_p)
 	arch_mem_init(cmdline_p);
 
 	resource_init();
-#ifdef CONFIG_SMP
 	plat_smp_setup();
-#endif
 }
 
 static int __init fpu_disable(char *s)

arch/mips/kernel/smp-mt.c

@@ -22,6 +22,7 @@
 #include <linux/cpumask.h>
 #include <linux/interrupt.h>
 #include <linux/compiler.h>
+#include <linux/smp.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
@@ -30,7 +31,6 @@
 #include <asm/system.h>
 #include <asm/hardirq.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #include <asm/time.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
@@ -215,68 +215,67 @@ static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0)
 	write_tc_c0_tchalt(TCHALT_H);
 }
 
-/*
- * Common setup before any secondaries are started
- * Make sure all CPU's are in a sensible state before we boot any of the
- * secondarys
- */
-void __init plat_smp_setup(void)
+static void vsmp_send_ipi_single(int cpu, unsigned int action)
 {
-	unsigned int mvpconf0, ntc, tc, ncpu = 0;
-
-#ifdef CONFIG_MIPS_MT_FPAFF
-	/* If we have an FPU, enroll ourselves in the FPU-full mask */
-	if (cpu_has_fpu)
-		cpu_set(0, mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-	if (!cpu_has_mipsmt)
-		return;
-
-	/* disable MT so we can configure */
-	dvpe();
-	dmt();
+	int i;
+	unsigned long flags;
+	int vpflags;
 
-	/* Put MVPE's into 'configuration state' */
-	set_c0_mvpcontrol(MVPCONTROL_VPC);
+	local_irq_save(flags);
 
-	mvpconf0 = read_c0_mvpconf0();
-	ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
+	vpflags = dvpe();	/* cant access the other CPU's registers whilst MVPE enabled */
 
-	/* we'll always have more TC's than VPE's, so loop setting everything
-	   to a sensible state */
-	for (tc = 0; tc <= ntc; tc++) {
-		settc(tc);
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		i = C_SW1;
+		break;
 
-		smp_tc_init(tc, mvpconf0);
-		ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
+	case SMP_RESCHEDULE_YOURSELF:
+	default:
+		i = C_SW0;
+		break;
 	}
 
-	/* Release config state */
-	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+	/* 1:1 mapping of vpe and tc... */
+	settc(cpu);
+	write_vpe_c0_cause(read_vpe_c0_cause() | i);
+	evpe(vpflags);
 
-	/* We'll wait until starting the secondaries before starting MVPE */
+	local_irq_restore(flags);
+}
 
-	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
+static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu_mask(i, mask)
+		vsmp_send_ipi_single(i, action);
 }
 
-void __init plat_prepare_cpus(unsigned int max_cpus)
+static void __cpuinit vsmp_init_secondary(void)
 {
-	mips_mt_set_cpuoptions();
+	/* Enable per-cpu interrupts */
 
-	/* set up ipi interrupts */
-	if (cpu_has_vint) {
-		set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
-		set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
-	}
+	/* This is Malta specific: IPI,performance and timer inetrrupts */
+	write_c0_status((read_c0_status() & ~ST0_IM ) |
+	                (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
+}
 
-	cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
-	cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
+static void __cpuinit vsmp_smp_finish(void)
+{
+	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
 
-	setup_irq(cpu_ipi_resched_irq, &irq_resched);
-	setup_irq(cpu_ipi_call_irq, &irq_call);
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpu_set(smp_processor_id(), mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
 
-	set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
-	set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
+	local_irq_enable();
+}
+
+static void vsmp_cpus_done(void)
+{
 }
 
 /*
@@ -287,7 +286,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
  * (unsigned long)idle->thread_info the gp
  * assumes a 1:1 mapping of TC => VPE
  */
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle)
 {
 	struct thread_info *gp = task_thread_info(idle);
 	dvpe();
@@ -321,57 +320,81 @@ void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 	evpe(EVPE_ENABLE);
 }
 
-void __cpuinit prom_init_secondary(void)
-{
-	/* Enable per-cpu interrupts */
-
-	/* This is Malta specific: IPI,performance and timer inetrrupts */
-	write_c0_status((read_c0_status() & ~ST0_IM ) |
-	                (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
-}
-
-void __cpuinit prom_smp_finish(void)
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondarys
+ */
+static void __init vsmp_smp_setup(void)
 {
-	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
+	unsigned int mvpconf0, ntc, tc, ncpu = 0;
+	unsigned int nvpe;
 
 #ifdef CONFIG_MIPS_MT_FPAFF
 	/* If we have an FPU, enroll ourselves in the FPU-full mask */
 	if (cpu_has_fpu)
-		cpu_set(smp_processor_id(), mt_fpu_cpumask);
+		cpu_set(0, mt_fpu_cpumask);
 #endif /* CONFIG_MIPS_MT_FPAFF */
+	if (!cpu_has_mipsmt)
+		return;
 
-	local_irq_enable();
-}
+	/* disable MT so we can configure */
+	dvpe();
+	dmt();
 
-void prom_cpus_done(void)
-{
-}
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
 
-void core_send_ipi(int cpu, unsigned int action)
-{
-	int i;
-	unsigned long flags;
-	int vpflags;
+	mvpconf0 = read_c0_mvpconf0();
+	ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
 
-	local_irq_save(flags);
+	nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+	smp_num_siblings = nvpe;
 
-	vpflags = dvpe();	/* cant access the other CPU's registers whilst MVPE enabled */
+	/* we'll always have more TC's than VPE's, so loop setting everything
+	   to a sensible state */
+	for (tc = 0; tc <= ntc; tc++) {
+		settc(tc);
 
-	switch (action) {
-	case SMP_CALL_FUNCTION:
-		i = C_SW1;
-		break;
+		smp_tc_init(tc, mvpconf0);
+		ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
+	}
 
-	case SMP_RESCHEDULE_YOURSELF:
-	default:
-		i = C_SW0;
-		break;
+	/* Release config state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* We'll wait until starting the secondaries before starting MVPE */
+
+	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
+}
+
+static void __init vsmp_prepare_cpus(unsigned int max_cpus)
+{
+	mips_mt_set_cpuoptions();
+
+	/* set up ipi interrupts */
+	if (cpu_has_vint) {
+		set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+		set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
 	}
 
-	/* 1:1 mapping of vpe and tc... */
-	settc(cpu);
-	write_vpe_c0_cause(read_vpe_c0_cause() | i);
-	evpe(vpflags);
+	cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+	cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
 
-	local_irq_restore(flags);
+	setup_irq(cpu_ipi_resched_irq, &irq_resched);
+	setup_irq(cpu_ipi_call_irq, &irq_call);
+
+	set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
+	set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
 }
+
+struct plat_smp_ops vsmp_smp_ops = {
+	.send_ipi_single	= vsmp_send_ipi_single,
+	.send_ipi_mask		= vsmp_send_ipi_mask,
+	.init_secondary		= vsmp_init_secondary,
+	.smp_finish		= vsmp_smp_finish,
+	.cpus_done		= vsmp_cpus_done,
+	.boot_secondary		= vsmp_boot_secondary,
+	.smp_setup		= vsmp_smp_setup,
+	.prepare_cpus		= vsmp_prepare_cpus,
+};

arch/mips/kernel/smp.c

@@ -37,7 +37,6 @@
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #include <asm/time.h>
 
 #ifdef CONFIG_MIPS_MT_SMTC
@@ -56,6 +55,44 @@ EXPORT_SYMBOL(cpu_online_map);
 extern void __init calibrate_delay(void);
 extern void cpu_idle(void);
 
+/* Number of TCs (or siblings in Intel speak) per CPU core */
+int smp_num_siblings = 1;
+EXPORT_SYMBOL(smp_num_siblings);
+
+/* representing the TCs (or siblings in Intel speak) of each logical CPU */
+cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(cpu_sibling_map);
+
+/* representing cpus for which sibling maps can be computed */
+static cpumask_t cpu_sibling_setup_map;
+
+static inline void set_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	cpu_set(cpu, cpu_sibling_setup_map);
+
+	if (smp_num_siblings > 1) {
+		for_each_cpu_mask(i, cpu_sibling_setup_map) {
+			if (cpu_data[cpu].core == cpu_data[i].core) {
+				cpu_set(i, cpu_sibling_map[cpu]);
+				cpu_set(cpu, cpu_sibling_map[i]);
+			}
+		}
+	} else
+		cpu_set(cpu, cpu_sibling_map[cpu]);
+}
+
+struct plat_smp_ops *mp_ops;
+
+__cpuinit void register_smp_ops(struct plat_smp_ops *ops)
+{
+	if (ops)
+		printk(KERN_WARNING "Overriding previous set SMP ops\n");
+
+	mp_ops = ops;
+}
+
 /*
  * First C code run on the secondary CPUs after being started up by
  * the master.
@@ -72,7 +109,7 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu_report();
 	per_cpu_trap_init();
 	mips_clockevent_init();
-	prom_init_secondary();
+	mp_ops->init_secondary();
 
 	/*
 	 * XXX parity protection should be folded in here when it's converted
@@ -84,7 +121,8 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
-	prom_smp_finish();
+	mp_ops->smp_finish();
+	set_cpu_sibling_map(cpu);
 
 	cpu_set(cpu, cpu_callin_map);
 
@@ -155,7 +193,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func) (void *info),
 	smp_mb();
 
 	/* Send a message to all other CPUs and wait for them to respond */
-	core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
+	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
 
 	/* Wait for response */
 	/* FIXME: lock-up detection, backtrace on lock-up */
@@ -249,7 +287,7 @@ void smp_send_stop(void)
 
 void __init smp_cpus_done(unsigned int max_cpus)
 {
-	prom_cpus_done();
+	mp_ops->cpus_done();
 }
 
 /* called from main before smp_init() */
@@ -257,7 +295,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	init_new_context(current, &init_mm);
 	current_thread_info()->cpu = 0;
-	plat_prepare_cpus(max_cpus);
+	mp_ops->prepare_cpus(max_cpus);
+	set_cpu_sibling_map(0);
 #ifndef CONFIG_HOTPLUG_CPU
 	cpu_present_map = cpu_possible_map;
 #endif
@@ -295,7 +334,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	if (IS_ERR(idle))
 		panic(KERN_ERR "Fork failed for CPU %d", cpu);
 
-	prom_boot_secondary(cpu, idle);
+	mp_ops->boot_secondary(cpu, idle);
 
 	/*
 	 * Trust is futile.  We should really have timeouts ...

arch/mips/kernel/smtc-proc.c

@@ -14,7 +14,6 @@
 #include <asm/system.h>
 #include <asm/hardirq.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #include <asm/mipsregs.h>
 #include <asm/cacheflush.h>
 #include <linux/proc_fs.h>

arch/mips/kernel/smtc.c

@@ -16,7 +16,6 @@
 #include <asm/hazards.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #include <asm/mipsregs.h>
 #include <asm/cacheflush.h>
 #include <asm/time.h>

arch/mips/kernel/time.c

@@ -50,8 +50,6 @@ int update_persistent_clock(struct timespec now)
 	return rtc_mips_set_mmss(now.tv_sec);
 }
 
-int (*mips_timer_state)(void);
-
 int null_perf_irq(void)
 {
 	return 0;

arch/mips/kernel/vpe.c

@@ -53,7 +53,6 @@
 #include <asm/system.h>
 #include <asm/vpe.h>
 #include <asm/kspd.h>
-#include <asm/mips_mt.h>
 
 typedef void *vpe_handle;
 

arch/mips/lasat/picvue.c

@@ -22,8 +22,6 @@
 
 struct pvc_defs *picvue;
 
-DECLARE_MUTEX(pvc_sem);
-
 static void pvc_reg_write(u32 val)
 {
 	*picvue->reg = val;

arch/mips/lasat/picvue.h

@@ -4,8 +4,6 @@
  * Brian Murphy <brian.murphy@eicon.com>
  *
  */
-#include <asm/semaphore.h>
-
 struct pvc_defs {
 	volatile u32 *reg;
 	u32 data_shift;
@@ -45,4 +43,3 @@ void pvc_move(u8 cmd);
 void pvc_clear(void);
 void pvc_home(void);
 
-extern struct semaphore pvc_sem;

arch/mips/lasat/picvue_proc.c

@@ -13,9 +13,11 @@
 #include <linux/interrupt.h>
 
 #include <linux/timer.h>
+#include <linux/mutex.h>
 
 #include "picvue.h"
 
+static DEFINE_MUTEX(pvc_mutex);
 static char pvc_lines[PVC_NLINES][PVC_LINELEN+1];
 static int pvc_linedata[PVC_NLINES];
 static struct proc_dir_entry *pvc_display_dir;
@@ -48,9 +50,9 @@ static int pvc_proc_read_line(char *page, char **start,
 		return 0;
 	}
 
-	down(&pvc_sem);
+	mutex_lock(&pvc_mutex);
 	page += sprintf(page, "%s\n", pvc_lines[lineno]);
-	up(&pvc_sem);
+	mutex_unlock(&pvc_mutex);
 
 	return page - origpage;
 }
@@ -73,10 +75,10 @@ static int pvc_proc_write_line(struct file *file, const char *buffer,
 	if (buffer[count-1] == '\n')
 		count--;
 
-	down(&pvc_sem);
+	mutex_lock(&pvc_mutex);
 	strncpy(pvc_lines[lineno], buffer, count);
 	pvc_lines[lineno][count] = '\0';
-	up(&pvc_sem);
+	mutex_unlock(&pvc_mutex);
 
 	tasklet_schedule(&pvc_display_tasklet);
 
@@ -89,7 +91,7 @@ static int pvc_proc_write_scroll(struct file *file, const char *buffer,
 	int origcount = count;
 	int cmd = simple_strtol(buffer, NULL, 10);
 
-	down(&pvc_sem);
+	mutex_lock(&pvc_mutex);
 	if (scroll_interval != 0)
 		del_timer(&timer);
 
@@ -106,7 +108,7 @@ static int pvc_proc_write_scroll(struct file *file, const char *buffer,
 		}
 		add_timer(&timer);
 	}
-	up(&pvc_sem);
+	mutex_unlock(&pvc_mutex);
 
 	return origcount;
 }
@@ -117,9 +119,9 @@ static int pvc_proc_read_scroll(char *page, char **start,
 {
 	char *origpage = page;
 
-	down(&pvc_sem);
+	mutex_lock(&pvc_mutex);
 	page += sprintf(page, "%d\n", scroll_dir * scroll_interval);
-	up(&pvc_sem);
+	mutex_unlock(&pvc_mutex);
 
 	return page - origpage;
 }

arch/mips/lemote/lm2e/pci.c

@@ -81,9 +81,6 @@ static void __init ict_pcimap(void)
 
 static int __init pcibios_init(void)
 {
-	extern int pci_probe_only;
-	pci_probe_only = 0;
-
 	ict_pcimap();
 	register_pci_controller(&loongson2e_pci_controller);
 

arch/mips/lemote/lm2e/prom.c

@@ -57,8 +57,6 @@ void __init prom_init(void)
 	arg = (int *)fw_arg1;
 	env = (int *)fw_arg2;
 
-	mips_machtype = MACH_LEMOTE_FULONG;
-
 	prom_init_cmdline();
 
 	if ((strstr(arcs_cmdline, "console=")) == NULL)

arch/mips/lib/memcpy-inatomic.S

@@ -9,6 +9,7 @@
  * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
  * Copyright (C) 2002 Broadcom, Inc.
  *   memcpy/copy_user author: Mark Vandevoorde
+ * Copyright (C) 2007  Maciej W. Rozycki
  *
  * Mnemonic names for arguments to memcpy/__copy_user
  */
@@ -175,7 +176,11 @@
 
 	.text
 	.set	noreorder
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
 	.set	noat
+#else
+	.set	at=v1
+#endif
 
 /*
  * A combined memcpy/__copy_user
@@ -204,36 +209,36 @@ LEAF(__copy_user_inatomic)
 	and	t1, dst, ADDRMASK
 	PREF(	0, 1*32(src) )
 	PREF(	1, 1*32(dst) )
-	bnez	t2, copy_bytes_checklen
+	bnez	t2, .Lcopy_bytes_checklen
 	 and	t0, src, ADDRMASK
 	PREF(	0, 2*32(src) )
 	PREF(	1, 2*32(dst) )
-	bnez	t1, dst_unaligned
+	bnez	t1, .Ldst_unaligned
 	 nop
-	bnez	t0, src_unaligned_dst_aligned
+	bnez	t0, .Lsrc_unaligned_dst_aligned
 	/*
 	 * use delay slot for fall-through
 	 * src and dst are aligned; need to compute rem
 	 */
-both_aligned:
-	 SRL	t0, len, LOG_NBYTES+3    # +3 for 8 units/iter
-	beqz	t0, cleanup_both_aligned # len < 8*NBYTES
-	 and	rem, len, (8*NBYTES-1)	 # rem = len % (8*NBYTES)
+.Lboth_aligned:
+	 SRL	t0, len, LOG_NBYTES+3    	# +3 for 8 units/iter
+	beqz	t0, .Lcleanup_both_aligned	# len < 8*NBYTES
+	 and	rem, len, (8*NBYTES-1)	 	# rem = len % (8*NBYTES)
 	PREF(	0, 3*32(src) )
 	PREF(	1, 3*32(dst) )
 	.align	4
 1:
-EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
-EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
-EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
-EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+EXC(	LOAD	t0, UNIT(0)(src),	.Ll_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	.Ll_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	.Ll_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	.Ll_exc_copy)
 	SUB	len, len, 8*NBYTES
-EXC(	LOAD	t4, UNIT(4)(src),	l_exc_copy)
-EXC(	LOAD	t7, UNIT(5)(src),	l_exc_copy)
+EXC(	LOAD	t4, UNIT(4)(src),	.Ll_exc_copy)
+EXC(	LOAD	t7, UNIT(5)(src),	.Ll_exc_copy)
 	STORE	t0, UNIT(0)(dst)
 	STORE	t1, UNIT(1)(dst)
-EXC(	LOAD	t0, UNIT(6)(src),	l_exc_copy)
-EXC(	LOAD	t1, UNIT(7)(src),	l_exc_copy)
+EXC(	LOAD	t0, UNIT(6)(src),	.Ll_exc_copy)
+EXC(	LOAD	t1, UNIT(7)(src),	.Ll_exc_copy)
 	ADD	src, src, 8*NBYTES
 	ADD	dst, dst, 8*NBYTES
 	STORE	t2, UNIT(-6)(dst)
@@ -250,39 +255,43 @@ EXC(	LOAD	t1, UNIT(7)(src),	l_exc_copy)
 	/*
 	 * len == rem == the number of bytes left to copy < 8*NBYTES
 	 */
-cleanup_both_aligned:
-	beqz	len, done
+.Lcleanup_both_aligned:
+	beqz	len, .Ldone
 	 sltu	t0, len, 4*NBYTES
-	bnez	t0, less_than_4units
+	bnez	t0, .Lless_than_4units
 	 and	rem, len, (NBYTES-1)	# rem = len % NBYTES
 	/*
 	 * len >= 4*NBYTES
 	 */
-EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
-EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
-EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
-EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+EXC(	LOAD	t0, UNIT(0)(src),	.Ll_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	.Ll_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	.Ll_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	.Ll_exc_copy)
 	SUB	len, len, 4*NBYTES
 	ADD	src, src, 4*NBYTES
 	STORE	t0, UNIT(0)(dst)
 	STORE	t1, UNIT(1)(dst)
 	STORE	t2, UNIT(2)(dst)
 	STORE	t3, UNIT(3)(dst)
-	beqz	len, done
-	 ADD	dst, dst, 4*NBYTES
-less_than_4units:
+	.set	reorder				/* DADDI_WAR */
+	ADD	dst, dst, 4*NBYTES
+	beqz	len, .Ldone
+	.set	noreorder
+.Lless_than_4units:
 	/*
 	 * rem = len % NBYTES
 	 */
-	beq	rem, len, copy_bytes
+	beq	rem, len, .Lcopy_bytes
 	 nop
 1:
-EXC(	LOAD	t0, 0(src),		l_exc)
+EXC(	LOAD	t0, 0(src),		.Ll_exc)
 	ADD	src, src, NBYTES
 	SUB	len, len, NBYTES
 	STORE	t0, 0(dst)
+	.set	reorder				/* DADDI_WAR */
+	ADD	dst, dst, NBYTES
 	bne	rem, len, 1b
-	 ADD	dst, dst, NBYTES
+	.set	noreorder
 
 	/*
 	 * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
@@ -296,17 +305,17 @@ EXC(	LOAD	t0, 0(src),		l_exc)
 	 * more instruction-level parallelism.
 	 */
 #define bits t2
-	beqz	len, done
+	beqz	len, .Ldone
 	 ADD	t1, dst, len	# t1 is just past last byte of dst
 	li	bits, 8*NBYTES
 	SLL	rem, len, 3	# rem = number of bits to keep
-EXC(	LOAD	t0, 0(src),		l_exc)
+EXC(	LOAD	t0, 0(src),		.Ll_exc)
 	SUB	bits, bits, rem	# bits = number of bits to discard
 	SHIFT_DISCARD t0, t0, bits
 	STREST	t0, -1(t1)
 	jr	ra
 	 move	len, zero
-dst_unaligned:
+.Ldst_unaligned:
 	/*
 	 * dst is unaligned
 	 * t0 = src & ADDRMASK
@@ -317,22 +326,22 @@ dst_unaligned:
 	 * Set match = (src and dst have same alignment)
 	 */
 #define match rem
-EXC(	LDFIRST	t3, FIRST(0)(src),	l_exc)
+EXC(	LDFIRST	t3, FIRST(0)(src),	.Ll_exc)
 	ADD	t2, zero, NBYTES
-EXC(	LDREST	t3, REST(0)(src),	l_exc_copy)
+EXC(	LDREST	t3, REST(0)(src),	.Ll_exc_copy)
 	SUB	t2, t2, t1	# t2 = number of bytes copied
 	xor	match, t0, t1
 	STFIRST t3, FIRST(0)(dst)
-	beq	len, t2, done
+	beq	len, t2, .Ldone
 	 SUB	len, len, t2
 	ADD	dst, dst, t2
-	beqz	match, both_aligned
+	beqz	match, .Lboth_aligned
 	 ADD	src, src, t2
 
-src_unaligned_dst_aligned:
+.Lsrc_unaligned_dst_aligned:
 	SRL	t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
 	PREF(	0, 3*32(src) )
-	beqz	t0, cleanup_src_unaligned
+	beqz	t0, .Lcleanup_src_unaligned
 	 and	rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
 	PREF(	1, 3*32(dst) )
 1:
@@ -342,15 +351,15 @@ src_unaligned_dst_aligned:
  * It's OK to load FIRST(N+1) before REST(N) because the two addresses
  * are to the same unit (unless src is aligned, but it's not).
  */
-EXC(	LDFIRST	t0, FIRST(0)(src),	l_exc)
-EXC(	LDFIRST	t1, FIRST(1)(src),	l_exc_copy)
+EXC(	LDFIRST	t0, FIRST(0)(src),	.Ll_exc)
+EXC(	LDFIRST	t1, FIRST(1)(src),	.Ll_exc_copy)
 	SUB     len, len, 4*NBYTES
-EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
-EXC(	LDREST	t1, REST(1)(src),	l_exc_copy)
-EXC(	LDFIRST	t2, FIRST(2)(src),	l_exc_copy)
-EXC(	LDFIRST	t3, FIRST(3)(src),	l_exc_copy)
-EXC(	LDREST	t2, REST(2)(src),	l_exc_copy)
-EXC(	LDREST	t3, REST(3)(src),	l_exc_copy)
+EXC(	LDREST	t0, REST(0)(src),	.Ll_exc_copy)
+EXC(	LDREST	t1, REST(1)(src),	.Ll_exc_copy)
+EXC(	LDFIRST	t2, FIRST(2)(src),	.Ll_exc_copy)
+EXC(	LDFIRST	t3, FIRST(3)(src),	.Ll_exc_copy)
+EXC(	LDREST	t2, REST(2)(src),	.Ll_exc_copy)
+EXC(	LDREST	t3, REST(3)(src),	.Ll_exc_copy)
 	PREF(	0, 9*32(src) )		# 0 is PREF_LOAD  (not streamed)
 	ADD	src, src, 4*NBYTES
 #ifdef CONFIG_CPU_SB1
@@ -361,32 +370,36 @@ EXC(	LDREST	t3, REST(3)(src),	l_exc_copy)
 	STORE	t2, UNIT(2)(dst)
 	STORE	t3, UNIT(3)(dst)
 	PREF(	1, 9*32(dst) )     	# 1 is PREF_STORE (not streamed)
+	.set	reorder				/* DADDI_WAR */
+	ADD	dst, dst, 4*NBYTES
 	bne	len, rem, 1b
-	 ADD	dst, dst, 4*NBYTES
+	.set	noreorder
 
-cleanup_src_unaligned:
-	beqz	len, done
+.Lcleanup_src_unaligned:
+	beqz	len, .Ldone
 	 and	rem, len, NBYTES-1  # rem = len % NBYTES
-	beq	rem, len, copy_bytes
+	beq	rem, len, .Lcopy_bytes
 	 nop
 1:
-EXC(	LDFIRST t0, FIRST(0)(src),	l_exc)
-EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
+EXC(	LDFIRST t0, FIRST(0)(src),	.Ll_exc)
+EXC(	LDREST	t0, REST(0)(src),	.Ll_exc_copy)
 	ADD	src, src, NBYTES
 	SUB	len, len, NBYTES
 	STORE	t0, 0(dst)
+	.set	reorder				/* DADDI_WAR */
+	ADD	dst, dst, NBYTES
 	bne	len, rem, 1b
-	 ADD	dst, dst, NBYTES
+	.set	noreorder
 
-copy_bytes_checklen:
-	beqz	len, done
+.Lcopy_bytes_checklen:
+	beqz	len, .Ldone
 	 nop
-copy_bytes:
+.Lcopy_bytes:
 	/* 0 < len < NBYTES  */
 #define COPY_BYTE(N)			\
-EXC(	lb	t0, N(src), l_exc);	\
+EXC(	lb	t0, N(src), .Ll_exc);	\
 	SUB	len, len, 1;		\
-	beqz	len, done;		\
+	beqz	len, .Ldone;		\
 	 sb	t0, N(dst)
 
 	COPY_BYTE(0)
@@ -397,16 +410,16 @@ EXC(	lb	t0, N(src), l_exc);	\
 	COPY_BYTE(4)
 	COPY_BYTE(5)
 #endif
-EXC(	lb	t0, NBYTES-2(src), l_exc)
+EXC(	lb	t0, NBYTES-2(src), .Ll_exc)
 	SUB	len, len, 1
 	jr	ra
 	 sb	t0, NBYTES-2(dst)
-done:
+.Ldone:
 	jr	ra
 	 nop
 	END(__copy_user_inatomic)
 
-l_exc_copy:
+.Ll_exc_copy:
 	/*
 	 * Copy bytes from src until faulting load address (or until a
 	 * lb faults)
@@ -421,12 +434,14 @@ l_exc_copy:
 	 nop
 	LOAD	t0, THREAD_BUADDR(t0)
 1:
-EXC(	lb	t1, 0(src),	l_exc)
+EXC(	lb	t1, 0(src),	.Ll_exc)
 	ADD	src, src, 1
 	sb	t1, 0(dst)	# can't fault -- we're copy_from_user
+	.set	reorder				/* DADDI_WAR */
+	ADD	dst, dst, 1
 	bne	src, t0, 1b
-	 ADD	dst, dst, 1
-l_exc:
+	.set	noreorder
+.Ll_exc:
 	LOAD	t0, TI_TASK($28)
 	 nop
 	LOAD	t0, THREAD_BUADDR(t0)	# t0 is just past last good address

arch/mips/lib/memset.S

@@ -5,6 +5,7 @@
  *
  * Copyright (C) 1998, 1999, 2000 by Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
  */
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
@@ -71,34 +72,45 @@ LEAF(memset)
 
 FEXPORT(__bzero)
 	sltiu		t0, a2, LONGSIZE	/* very small region? */
-	bnez		t0, small_memset
+	bnez		t0, .Lsmall_memset
 	 andi		t0, a0, LONGMASK	/* aligned? */
 
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
 	beqz		t0, 1f
 	 PTR_SUBU	t0, LONGSIZE		/* alignment in bytes */
+#else
+	.set		noat
+	li		AT, LONGSIZE
+	beqz		t0, 1f
+	 PTR_SUBU	t0, AT			/* alignment in bytes */
+	.set		at
+#endif
 
+	R10KCBARRIER(0(ra))
 #ifdef __MIPSEB__
-	EX(LONG_S_L, a1, (a0), first_fixup)	/* make word/dword aligned */
+	EX(LONG_S_L, a1, (a0), .Lfirst_fixup)	/* make word/dword aligned */
 #endif
 #ifdef __MIPSEL__
-	EX(LONG_S_R, a1, (a0), first_fixup)	/* make word/dword aligned */
+	EX(LONG_S_R, a1, (a0), .Lfirst_fixup)	/* make word/dword aligned */
 #endif
 	PTR_SUBU	a0, t0			/* long align ptr */
 	PTR_ADDU	a2, t0			/* correct size */
 
 1:	ori		t1, a2, 0x3f		/* # of full blocks */
 	xori		t1, 0x3f
-	beqz		t1, memset_partial	/* no block to fill */
+	beqz		t1, .Lmemset_partial	/* no block to fill */
 	 andi		t0, a2, 0x40-LONGSIZE
 
 	PTR_ADDU	t1, a0			/* end address */
 	.set		reorder
 1:	PTR_ADDIU	a0, 64
-	f_fill64 a0, -64, a1, fwd_fixup
+	R10KCBARRIER(0(ra))
+	f_fill64 a0, -64, a1, .Lfwd_fixup
 	bne		t1, a0, 1b
 	.set		noreorder
 
-memset_partial:
+.Lmemset_partial:
+	R10KCBARRIER(0(ra))
 	PTR_LA		t1, 2f			/* where to start */
 #if LONGSIZE == 4
 	PTR_SUBU	t1, t0
@@ -106,7 +118,7 @@ memset_partial:
 	.set		noat
 	LONG_SRL		AT, t0, 1
 	PTR_SUBU	t1, AT
-	.set		noat
+	.set		at
 #endif
 	jr		t1
 	 PTR_ADDU	a0, t0			/* dest ptr */
@@ -114,26 +126,28 @@ memset_partial:
 	.set		push
 	.set		noreorder
 	.set		nomacro
-	f_fill64 a0, -64, a1, partial_fixup	/* ... but first do longs ... */
+	f_fill64 a0, -64, a1, .Lpartial_fixup	/* ... but first do longs ... */
 2:	.set		pop
 	andi		a2, LONGMASK		/* At most one long to go */
 
 	beqz		a2, 1f
 	 PTR_ADDU	a0, a2			/* What's left */
+	R10KCBARRIER(0(ra))
 #ifdef __MIPSEB__
-	EX(LONG_S_R, a1, -1(a0), last_fixup)
+	EX(LONG_S_R, a1, -1(a0), .Llast_fixup)
 #endif
 #ifdef __MIPSEL__
-	EX(LONG_S_L, a1, -1(a0), last_fixup)
+	EX(LONG_S_L, a1, -1(a0), .Llast_fixup)
 #endif
 1:	jr		ra
 	 move		a2, zero
 
-small_memset:
+.Lsmall_memset:
 	beqz		a2, 2f
 	 PTR_ADDU	t1, a0, a2
 
 1:	PTR_ADDIU	a0, 1			/* fill bytewise */
+	R10KCBARRIER(0(ra))
 	bne		t1, a0, 1b
 	 sb		a1, -1(a0)
 
@@ -141,11 +155,11 @@ small_memset:
 	 move		a2, zero
 	END(memset)
 
-first_fixup:
+.Lfirst_fixup:
 	jr	ra
 	 nop
 
-fwd_fixup:
+.Lfwd_fixup:
 	PTR_L		t0, TI_TASK($28)
 	LONG_L		t0, THREAD_BUADDR(t0)
 	andi		a2, 0x3f
@@ -153,7 +167,7 @@ fwd_fixup:
 	jr		ra
 	 LONG_SUBU	a2, t0
 
-partial_fixup:
+.Lpartial_fixup:
 	PTR_L		t0, TI_TASK($28)
 	LONG_L		t0, THREAD_BUADDR(t0)
 	andi		a2, LONGMASK
@@ -161,6 +175,6 @@ partial_fixup:
 	jr		ra
 	 LONG_SUBU	a2, t0
 
-last_fixup:
+.Llast_fixup:
 	jr		ra
 	 andi		v1, a2, LONGMASK