Commit 21b1861f authored by David Brownell's avatar David Brownell Committed by Linus Torvalds

[PATCH] USB: ohci, move ppc asic tweaks nearer pci

This should fix a suspend/resume issues that appear with OHCI on some
PPC hardware.  The PCI layer should doesn't have the hooks needed for
such ASIC-specific hooks (in this case, software clock gating), so
this moves the code to do that into hcd-pci.c ... where it can be
done after the relevant PCI PM state transition (to/from D3).
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 18807521
......@@ -20,9 +20,17 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/usb.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/usb.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#endif
#include "usb.h"
#include "hcd.h"
......@@ -277,8 +285,22 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
}
done:
if (retval == 0)
if (retval == 0) {
dev->dev.power.power_state = PMSG_SUSPEND;
#ifdef CONFIG_PPC_PMAC
/* Disable ASIC clocks for USB */
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
of_node = pci_device_to_OF_node (dev);
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE,
of_node, 0, 0);
}
#endif
}
return retval;
}
EXPORT_SYMBOL (usb_hcd_pci_suspend);
......@@ -301,6 +323,18 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
return 0;
}
#ifdef CONFIG_PPC_PMAC
/* Reenable ASIC clocks for USB */
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
of_node = pci_device_to_OF_node (dev);
if (of_node)
pmac_call_feature (PMAC_FTR_USB_ENABLE,
of_node, 0, 1);
}
#endif
/* NOTE: chip docs cover clean "real suspend" cases (what Linux
* calls "standby", "suspend to RAM", and so on). There are also
* dirty cases when swsusp fakes a suspend in "shutdown" mode.
......
......@@ -14,15 +14,6 @@
* This file is licenced under the GPL.
*/
#include <linux/jiffies.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#endif
#ifndef CONFIG_PCI
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
......@@ -115,39 +106,12 @@ ohci_pci_start (struct usb_hcd *hcd)
static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
{
/* root hub was already suspended */
/* FIXME these PMAC things get called in the wrong places. ASIC
* clocks should be turned off AFTER entering D3, and on BEFORE
* trying to enter D0. Evidently the PCI layer doesn't currently
* provide the right sort of platform hooks for this ...
*/
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
/* Disable USB PAD & cell clock */
of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
}
#endif /* CONFIG_PPC_PMAC */
return 0;
}
static int ohci_pci_resume (struct usb_hcd *hcd)
{
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
/* Re-enable USB PAD & cell clock */
of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
if (of_node)
pmac_call_feature (PMAC_FTR_USB_ENABLE, of_node, 0, 1);
}
#endif /* CONFIG_PPC_PMAC */
usb_hcd_resume_root_hub(hcd);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment