Merge branch 'selftests-updates-for-mlxsw-driver-test'

Jiri Pirko says:

====================
selftests: updates for mlxsw driver test

This patchset contains tweaks to the existing tests and is also adding
couple of new ones, namely tests for shared buffer and red offload.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/drivers/net/mlxsw/blackhole_routes.sh

@@ -45,6 +45,7 @@ ALL_TESTS="
 	blackhole_ipv6
 "
 NUM_NETIFS=4
+: ${TIMEOUT:=20000} # ms
 source $lib_dir/tc_common.sh
 source $lib_dir/lib.sh
 
@@ -123,7 +124,7 @@ blackhole_ipv4()
 		skip_hw dst_ip 198.51.100.1 src_ip 192.0.2.1 ip_proto icmp \
 		action pass
 
-	ip -4 route show 198.51.100.0/30 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload ip -4 route show 198.51.100.0/30
 	check_err $? "route not marked as offloaded when should"
 
 	ping_do $h1 198.51.100.1
@@ -147,7 +148,7 @@ blackhole_ipv6()
 		skip_hw dst_ip 2001:db8:2::1 src_ip 2001:db8:1::1 \
 		ip_proto icmpv6 action pass
 
-	ip -6 route show 2001:db8:2::/120 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload ip -6 route show 2001:db8:2::/120
 	check_err $? "route not marked as offloaded when should"
 
 	ping6_do $h1 2001:db8:2::1

tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh

@@ -641,13 +641,9 @@ erif_disabled_test()
 	mz_pid=$!
 
 	sleep 5
-	# In order to see this trap we need a route that points to disabled RIF.
-	# When ipv6 address is flushed, there is a delay and the routes are
-	# deleted before the RIF and we cannot get state that we have route
-	# to disabled RIF.
-	# Delete IPv6 address first and then check this trap with flushing IPv4.
-	ip -6 add flush dev br0
-	ip -4 add flush dev br0
+	# Unlinking the port from the bridge will disable the RIF associated
+	# with br0 as it is no longer an upper of any mlxsw port.
+	ip link set dev $rp1 nomaster
 
 	t1_packets=$(devlink_trap_rx_packets_get $trap_name)
 	t1_bytes=$(devlink_trap_rx_bytes_get $trap_name)
@@ -659,7 +655,6 @@ erif_disabled_test()
 	log_test "Egress RIF disabled"
 
 	kill $mz_pid && wait $mz_pid &> /dev/null
-	ip link set dev $rp1 nomaster
 	__addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64
 	ip link del dev br0 type bridge
 	devlink_trap_action_set $trap_name "drop"

tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+##############################################################################
+# Defines
+
+if [[ ! -v MLXSW_CHIP ]]; then
+	MLXSW_CHIP=$(devlink -j dev info $DEVLINK_DEV | jq -r '.[][]["driver"]')
+	if [ -z "$MLXSW_CHIP" ]; then
+		echo "SKIP: Device $DEVLINK_DEV doesn't support devlink info command"
+		exit 1
+	fi
+fi

tools/testing/selftests/drivers/net/mlxsw/router_scale.sh

@@ -2,16 +2,15 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ROUTER_NUM_NETIFS=4
+: ${TIMEOUT:=20000} # ms
 
 router_h1_create()
 {
 	simple_if_init $h1 192.0.1.1/24
-	ip route add 193.0.0.0/8 via 192.0.1.2 dev $h1
 }
 
 router_h1_destroy()
 {
-	ip route del 193.0.0.0/8 via 192.0.1.2 dev $h1
 	simple_if_fini $h1 192.0.1.1/24
 }
 
@@ -64,13 +63,15 @@ router_setup_prepare()
 	router_create
 }
 
-router_offload_validate()
+wait_for_routes()
 {
-	local route_count=$1
-	local offloaded_count
+	local t0=$1; shift
+	local route_count=$1; shift
 
-	offloaded_count=$(ip route | grep -o 'offload' | wc -l)
-	[[ $offloaded_count -ge $route_count ]]
+	local t1=$(ip route | grep -o 'offload' | wc -l)
+	local delta=$((t1 - t0))
+	echo $delta
+	[[ $delta -ge $route_count ]]
 }
 
 router_routes_create()
@@ -90,8 +91,8 @@ router_routes_create()
 					break 3
 				fi
 
-				echo route add 193.${i}.${j}.${k}/32 via \
-				       192.0.2.1 dev $rp2  >> $ROUTE_FILE
+				echo route add 193.${i}.${j}.${k}/32 dev $rp2 \
+					>> $ROUTE_FILE
 				((count++))
 			done
 		done
@@ -111,45 +112,19 @@ router_test()
 {
 	local route_count=$1
 	local should_fail=$2
-	local count=0
+	local delta
 
 	RET=0
 
+	local t0=$(ip route | grep -o 'offload' | wc -l)
 	router_routes_create $route_count
+	delta=$(busywait "$TIMEOUT" wait_for_routes $t0 $route_count)
 
-	router_offload_validate $route_count
-	check_err_fail $should_fail $? "Offload of $route_count routes"
+	check_err_fail $should_fail $? "Offload routes: Expected $route_count, got $delta."
 	if [[ $RET -ne 0 ]] || [[ $should_fail -eq 1 ]]; then
 		return
 	fi
 
-	tc filter add dev $h2 ingress protocol ip pref 1 flower \
-		skip_sw dst_ip 193.0.0.0/8 action drop
-
-	for i in {0..255}
-	do
-		for j in {0..255}
-		do
-			for k in {0..255}
-			do
-				if [[ $count -eq $route_count ]]; then
-					break 3
-				fi
-
-				$MZ $h1 -c 1 -p 64 -a $h1mac -b $rp1mac \
-					-A 192.0.1.1 -B 193.${i}.${j}.${k} \
-					-t ip -q
-				((count++))
-			done
-		done
-	done
-
-	tc_check_packets "dev $h2 ingress" 1 $route_count
-	check_err $? "Offload mismatch"
-
-	tc filter del dev $h2 ingress protocol ip pref 1 flower \
-		skip_sw dst_ip 193.0.0.0/8 action drop
-
 	router_routes_destroy
 }
 

tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh

@@ -32,6 +32,7 @@ ALL_TESTS="
 	devlink_reload_test
 "
 NUM_NETIFS=2
+: ${TIMEOUT:=20000} # ms
 source $lib_dir/lib.sh
 source $lib_dir/devlink_lib.sh
 
@@ -360,20 +361,24 @@ vlan_rif_refcount_test()
 	ip link add link br0 name br0.10 up type vlan id 10
 	ip -6 address add 2001:db8:1::1/64 dev br0.10
 
-	ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:1::2 dev br0.10
 	check_err $? "vlan rif was not created before adding port to vlan"
 
 	bridge vlan add vid 10 dev $swp1
-	ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:1::2 dev br0.10
 	check_err $? "vlan rif was destroyed after adding port to vlan"
 
 	bridge vlan del vid 10 dev $swp1
-	ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:1::2 dev br0.10
 	check_err $? "vlan rif was destroyed after removing port from vlan"
 
 	ip link set dev $swp1 nomaster
-	ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
-	check_fail $? "vlan rif was not destroyed after unlinking port from bridge"
+	busywait "$TIMEOUT" not wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:1::2 dev br0.10
+	check_err $? "vlan rif was not destroyed after unlinking port from bridge"
 
 	log_test "vlan rif refcount"
 
@@ -401,22 +406,28 @@ subport_rif_refcount_test()
 	ip -6 address add 2001:db8:1::1/64 dev bond1
 	ip -6 address add 2001:db8:2::1/64 dev bond1.10
 
-	ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:1::2 dev bond1
 	check_err $? "subport rif was not created on lag device"
-	ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10
 	check_err $? "subport rif was not created on vlan device"
 
 	ip link set dev $swp1 nomaster
-	ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:1::2 dev bond1
 	check_err $? "subport rif of lag device was destroyed when should not"
-	ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10
 	check_err $? "subport rif of vlan device was destroyed when should not"
 
 	ip link set dev $swp2 nomaster
-	ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
-	check_fail $? "subport rif of lag device was not destroyed when should"
-	ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
-	check_fail $? "subport rif of vlan device was not destroyed when should"
+	busywait "$TIMEOUT" not wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:1::2 dev bond1
+	check_err $? "subport rif of lag device was not destroyed when should"
+	busywait "$TIMEOUT" not wait_for_offload \
+		ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10
+	check_err $? "subport rif of vlan device was not destroyed when should"
 
 	log_test "subport rif refcount"
 
@@ -575,7 +586,8 @@ bridge_extern_learn_test()
 
 	bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn
 
-	bridge fdb show brport $swp1 | grep de:ad:be:ef:13:37 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		bridge fdb show brport $swp1 de:ad:be:ef:13:37
 	check_err $? "fdb entry not marked as offloaded when should"
 
 	log_test "externally learned fdb entry"
@@ -595,9 +607,11 @@ neigh_offload_test()
 	ip -6 neigh add 2001:db8:1::2 lladdr de:ad:be:ef:13:37 nud perm \
 		dev $swp1
 
-	ip -4 neigh show dev $swp1 | grep 192.0.2.2 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -4 neigh show dev $swp1 192.0.2.2
 	check_err $? "ipv4 neigh entry not marked as offloaded when should"
-	ip -6 neigh show dev $swp1 | grep 2001:db8:1::2 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 neigh show dev $swp1 2001:db8:1::2
 	check_err $? "ipv6 neigh entry not marked as offloaded when should"
 
 	log_test "neighbour offload indication"
@@ -623,25 +637,31 @@ nexthop_offload_test()
 	ip -6 route add 2001:db8:2::/64 vrf v$swp1 \
 		nexthop via 2001:db8:1::2 dev $swp1
 
-	ip -4 route show 198.51.100.0/24 vrf v$swp1 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -4 route show 198.51.100.0/24 vrf v$swp1
 	check_err $? "ipv4 nexthop not marked as offloaded when should"
-	ip -6 route show 2001:db8:2::/64 vrf v$swp1 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 route show 2001:db8:2::/64 vrf v$swp1
 	check_err $? "ipv6 nexthop not marked as offloaded when should"
 
 	ip link set dev $swp2 down
 	sleep 1
 
-	ip -4 route show 198.51.100.0/24 vrf v$swp1 | grep -q offload
-	check_fail $? "ipv4 nexthop marked as offloaded when should not"
-	ip -6 route show 2001:db8:2::/64 vrf v$swp1 | grep -q offload
-	check_fail $? "ipv6 nexthop marked as offloaded when should not"
+	busywait "$TIMEOUT" not wait_for_offload \
+		ip -4 route show 198.51.100.0/24 vrf v$swp1
+	check_err $? "ipv4 nexthop marked as offloaded when should not"
+	busywait "$TIMEOUT" not wait_for_offload \
+		ip -6 route show 2001:db8:2::/64 vrf v$swp1
+	check_err $? "ipv6 nexthop marked as offloaded when should not"
 
 	ip link set dev $swp2 up
 	setup_wait
 
-	ip -4 route show 198.51.100.0/24 vrf v$swp1 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -4 route show 198.51.100.0/24 vrf v$swp1
 	check_err $? "ipv4 nexthop not marked as offloaded after neigh add"
-	ip -6 route show 2001:db8:2::/64 vrf v$swp1 | grep -q offload
+	busywait "$TIMEOUT" wait_for_offload \
+		ip -6 route show 2001:db8:2::/64 vrf v$swp1
 	check_err $? "ipv6 nexthop not marked as offloaded after neigh add"
 
 	log_test "nexthop offload indication"

tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ecn_test
+	red_test
+	mc_backlog_test
+"
+: ${QDISC:=ets}
+source sch_red_core.sh
+
+# do_ecn_test first build 2/3 of the requested backlog and expects no marking,
+# and then builds 3/2 of it and does expect marking. The values of $BACKLOG1 and
+# $BACKLOG2 are far enough not to overlap, so that we can assume that if we do
+# see (do not see) marking, it is actually due to the configuration of that one
+# TC, and not due to configuration of the other TC leaking over.
+BACKLOG1=200000
+BACKLOG2=500000
+
+install_qdisc()
+{
+	local -a args=("$@")
+
+	tc qdisc add dev $swp3 root handle 10: $QDISC \
+	   bands 8 priomap 7 6 5 4 3 2 1 0
+	tc qdisc add dev $swp3 parent 10:8 handle 108: red \
+	   limit 1000000 min $BACKLOG1 max $((BACKLOG1 + 1)) \
+	   probability 1.0 avpkt 8000 burst 38 "${args[@]}"
+	tc qdisc add dev $swp3 parent 10:7 handle 107: red \
+	   limit 1000000 min $BACKLOG2 max $((BACKLOG2 + 1)) \
+	   probability 1.0 avpkt 8000 burst 63 "${args[@]}"
+	sleep 1
+}
+
+uninstall_qdisc()
+{
+	tc qdisc del dev $swp3 parent 10:7
+	tc qdisc del dev $swp3 parent 10:8
+	tc qdisc del dev $swp3 root
+}
+
+ecn_test()
+{
+	install_qdisc ecn
+
+	do_ecn_test 10 $BACKLOG1
+	do_ecn_test 11 $BACKLOG2
+
+	uninstall_qdisc
+}
+
+red_test()
+{
+	install_qdisc
+
+	do_red_test 10 $BACKLOG1
+	do_red_test 11 $BACKLOG2
+
+	uninstall_qdisc
+}
+
+mc_backlog_test()
+{
+	install_qdisc
+
+	# Note that the backlog numbers here do not correspond to RED
+	# configuration, but are arbitrary.
+	do_mc_backlog_test 10 $BACKLOG1
+	do_mc_backlog_test 11 $BACKLOG2
+
+	uninstall_qdisc
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+bail_on_lldpad
+tests_run
+
+exit $EXIT_STATUS

tools/testing/selftests/drivers/net/mlxsw/sch_red_prio.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+QDISC=prio
+source sch_red_ets.sh

tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ecn_test
+	red_test
+	mc_backlog_test
+"
+source sch_red_core.sh
+
+BACKLOG=300000
+
+install_qdisc()
+{
+	local -a args=("$@")
+
+	tc qdisc add dev $swp3 root handle 108: red \
+	   limit 1000000 min $BACKLOG max $((BACKLOG + 1)) \
+	   probability 1.0 avpkt 8000 burst 38 "${args[@]}"
+	sleep 1
+}
+
+uninstall_qdisc()
+{
+	tc qdisc del dev $swp3 root
+}
+
+ecn_test()
+{
+	install_qdisc ecn
+	do_ecn_test 10 $BACKLOG
+	uninstall_qdisc
+}
+
+red_test()
+{
+	install_qdisc
+	do_red_test 10 $BACKLOG
+	uninstall_qdisc
+}
+
+mc_backlog_test()
+{
+	install_qdisc
+	# Note that the backlog value here does not correspond to RED
+	# configuration, but is arbitrary.
+	do_mc_backlog_test 10 $BACKLOG
+	uninstall_qdisc
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+bail_on_lldpad
+tests_run
+
+exit $EXIT_STATUS

tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	port_pool_test
+	port_tc_ip_test
+	port_tc_arp_test
+"
+
+NUM_NETIFS=2
+source ../../../net/forwarding/lib.sh
+source ../../../net/forwarding/devlink_lib.sh
+source mlxsw_lib.sh
+
+SB_POOL_ING=0
+SB_POOL_EGR_CPU=10
+
+SB_ITC_CPU_IP=3
+SB_ITC_CPU_ARP=2
+SB_ITC=0
+
+h1_create()
+{
+	simple_if_init $h1 192.0.1.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.1.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.1.2/24
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.1.2/24
+}
+
+sb_occ_pool_check()
+{
+	local dl_port=$1; shift
+	local pool=$1; shift
+	local exp_max_occ=$1
+	local max_occ
+	local err=0
+
+	max_occ=$(devlink sb -j occupancy show $dl_port \
+		  | jq -e ".[][][\"pool\"][\"$pool\"][\"max\"]")
+
+	if [[ "$max_occ" -ne "$exp_max_occ" ]]; then
+		err=1
+	fi
+
+	echo $max_occ
+	return $err
+}
+
+sb_occ_itc_check()
+{
+	local dl_port=$1; shift
+	local itc=$1; shift
+	local exp_max_occ=$1
+	local max_occ
+	local err=0
+
+	max_occ=$(devlink sb -j occupancy show $dl_port \
+		  | jq -e ".[][][\"itc\"][\"$itc\"][\"max\"]")
+
+	if [[ "$max_occ" -ne "$exp_max_occ" ]]; then
+		err=1
+	fi
+
+	echo $max_occ
+	return $err
+}
+
+sb_occ_etc_check()
+{
+	local dl_port=$1; shift
+	local etc=$1; shift
+	local exp_max_occ=$1; shift
+	local max_occ
+	local err=0
+
+	max_occ=$(devlink sb -j occupancy show $dl_port \
+		  | jq -e ".[][][\"etc\"][\"$etc\"][\"max\"]")
+
+	if [[ "$max_occ" -ne "$exp_max_occ" ]]; then
+		err=1
+	fi
+
+	echo $max_occ
+	return $err
+}
+
+port_pool_test()
+{
+	local exp_max_occ=288
+	local max_occ
+
+	devlink sb occupancy clearmax $DEVLINK_DEV
+
+	$MZ $h1 -c 1 -p 160 -a $h1mac -b $h2mac -A 192.0.1.1 -B 192.0.1.2 \
+		-t ip -q
+
+	devlink sb occupancy snapshot $DEVLINK_DEV
+
+	RET=0
+	max_occ=$(sb_occ_pool_check $dl_port1 $SB_POOL_ING $exp_max_occ)
+	check_err $? "Expected iPool($SB_POOL_ING) max occupancy to be $exp_max_occ, but got $max_occ"
+	log_test "physical port's($h1) ingress pool"
+
+	RET=0
+	max_occ=$(sb_occ_pool_check $dl_port2 $SB_POOL_ING $exp_max_occ)
+	check_err $? "Expected iPool($SB_POOL_ING) max occupancy to be $exp_max_occ, but got $max_occ"
+	log_test "physical port's($h2) ingress pool"
+
+	RET=0
+	max_occ=$(sb_occ_pool_check $cpu_dl_port $SB_POOL_EGR_CPU $exp_max_occ)
+	check_err $? "Expected ePool($SB_POOL_EGR_CPU) max occupancy to be $exp_max_occ, but got $max_occ"
+	log_test "CPU port's egress pool"
+}
+
+port_tc_ip_test()
+{
+	local exp_max_occ=288
+	local max_occ
+
+	devlink sb occupancy clearmax $DEVLINK_DEV
+
+	$MZ $h1 -c 1 -p 160 -a $h1mac -b $h2mac -A 192.0.1.1 -B 192.0.1.2 \
+		-t ip -q
+
+	devlink sb occupancy snapshot $DEVLINK_DEV
+
+	RET=0
+	max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ)
+	check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ"
+	log_test "physical port's($h1) ingress TC - IP packet"
+
+	RET=0
+	max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ)
+	check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ"
+	log_test "physical port's($h2) ingress TC - IP packet"
+
+	RET=0
+	max_occ=$(sb_occ_etc_check $cpu_dl_port $SB_ITC_CPU_IP $exp_max_occ)
+	check_err $? "Expected egress TC($SB_ITC_CPU_IP) max occupancy to be $exp_max_occ, but got $max_occ"
+	log_test "CPU port's egress TC - IP packet"
+}
+
+port_tc_arp_test()
+{
+	local exp_max_occ=96
+	local max_occ
+
+	if [[ $MLXSW_CHIP != "mlxsw_spectrum" ]]; then
+		exp_max_occ=144
+	fi
+
+	devlink sb occupancy clearmax $DEVLINK_DEV
+
+	$MZ $h1 -c 1 -p 160 -a $h1mac -A 192.0.1.1 -t arp -q
+
+	devlink sb occupancy snapshot $DEVLINK_DEV
+
+	RET=0
+	max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ)
+	check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ"
+	log_test "physical port's($h1) ingress TC - ARP packet"
+
+	RET=0
+	max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ)
+	check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ"
+	log_test "physical port's($h2) ingress TC - ARP packet"
+
+	RET=0
+	max_occ=$(sb_occ_etc_check $cpu_dl_port $SB_ITC_CPU_ARP $exp_max_occ)
+	check_err $? "Expected egress TC($SB_ITC_IP2ME) max occupancy to be $exp_max_occ, but got $max_occ"
+	log_test "CPU port's egress TC - ARP packet"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	dl_port1=$(devlink_port_by_netdev $h1)
+	dl_port2=$(devlink_port_by_netdev $h2)
+
+	cpu_dl_port=$(devlink_cpu_port_get)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS

tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh

@@ -8,8 +8,9 @@ source $lib_dir/lib.sh
 source $lib_dir/tc_common.sh
 source $lib_dir/devlink_lib.sh
 
-if [ "$DEVLINK_VIDDID" != "15b3:cf6c" ]; then
-	echo "SKIP: test is tailored for Mellanox Spectrum-2"
+if [[ "$DEVLINK_VIDDID" != "15b3:cf6c" && \
+	"$DEVLINK_VIDDID" != "15b3:cf70" ]]; then
+	echo "SKIP: test is tailored for Mellanox Spectrum-2 and Spectrum-3"
 	exit 1
 fi
 

tools/testing/selftests/drivers/net/mlxsw/tc_flower_restrictions.sh

@@ -3,7 +3,11 @@
 
 lib_dir=$(dirname $0)/../../../net/forwarding
 
-ALL_TESTS="shared_block_drop_test"
+ALL_TESTS="
+	shared_block_drop_test
+	egress_redirect_test
+	multi_mirror_test
+"
 NUM_NETIFS=2
 
 source $lib_dir/tc_common.sh
@@ -69,6 +73,88 @@ shared_block_drop_test()
 	log_test "shared block drop"
 }
 
+egress_redirect_test()
+{
+	RET=0
+
+	# It is forbidden in mlxsw driver to have mirred redirect on
+	# egress-bound block.
+
+	tc qdisc add dev $swp1 ingress_block 22 clsact
+	check_err $? "Failed to create clsact with ingress block"
+
+	tc filter add block 22 protocol ip pref 1 handle 101 flower \
+		skip_sw dst_ip 192.0.2.2 \
+		action mirred egress redirect dev $swp2
+	check_err $? "Failed to add redirect rule to ingress bound block"
+
+	tc qdisc add dev $swp2 ingress_block 22 clsact
+	check_err $? "Failed to create another clsact with ingress shared block"
+
+	tc qdisc del dev $swp2 clsact
+
+	tc qdisc add dev $swp2 egress_block 22 clsact
+	check_fail $? "Incorrect success to create another clsact with egress shared block"
+
+	tc filter del block 22 protocol ip pref 1 handle 101 flower
+
+	tc qdisc add dev $swp2 egress_block 22 clsact
+	check_err $? "Failed to create another clsact with egress shared block after blocker redirect rule removed"
+
+	tc filter add block 22 protocol ip pref 1 handle 101 flower \
+		skip_sw dst_ip 192.0.2.2 \
+		action mirred egress redirect dev $swp2
+	check_fail $? "Incorrect success to add redirect rule to mixed bound block"
+
+	tc qdisc del dev $swp1 clsact
+
+	tc qdisc add dev $swp1 egress_block 22 clsact
+	check_err $? "Failed to create another clsact with egress shared block"
+
+	tc filter add block 22 protocol ip pref 1 handle 101 flower \
+		skip_sw dst_ip 192.0.2.2 \
+		action mirred egress redirect dev $swp2
+	check_fail $? "Incorrect success to add redirect rule to egress bound shared block"
+
+	tc qdisc del dev $swp2 clsact
+
+	tc filter add block 22 protocol ip pref 1 handle 101 flower \
+		skip_sw dst_ip 192.0.2.2 \
+		action mirred egress redirect dev $swp2
+	check_fail $? "Incorrect success to add redirect rule to egress bound block"
+
+	tc qdisc del dev $swp1 clsact
+
+	log_test "shared block drop"
+}
+
+multi_mirror_test()
+{
+	RET=0
+
+	# It is forbidden in mlxsw driver to have multiple mirror
+	# actions in a single rule.
+
+	tc qdisc add dev $swp1 clsact
+
+	tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \
+		skip_sw dst_ip 192.0.2.2 \
+		action mirred egress mirror dev $swp2
+	check_err $? "Failed to add rule with single mirror action"
+
+	tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower
+
+	tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \
+		skip_sw dst_ip 192.0.2.2 \
+		action mirred egress mirror dev $swp2 \
+		action mirred egress mirror dev $swp1
+	check_fail $? "Incorrect success to add rule with two mirror actions"
+
+	tc qdisc del dev $swp1 clsact
+
+	log_test "multi mirror"
+}
+
 setup_prepare()
 {
 	swp1=${NETIFS[p1]}

tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh

@@ -2,9 +2,9 @@
 # SPDX-License-Identifier: GPL-2.0
 
 # Test for resource limit of offloaded flower rules. The test adds a given
-# number of flower matches for different IPv6 addresses, then generates traffic,
-# and ensures each was hit exactly once. This file contains functions to set up
-# a testing topology and run the test, and is meant to be sourced from a test
+# number of flower matches for different IPv6 addresses, then check the offload
+# indication for all of the tc flower rules. This file contains functions to set
+# up a testing topology and run the test, and is meant to be sourced from a test
 # script that calls the testing routine with a given number of rules.
 
 TC_FLOWER_NUM_NETIFS=2
@@ -94,22 +94,15 @@ __tc_flower_test()
 
 	tc_flower_rules_create $count $should_fail
 
-	for ((i = 0; i < count; ++i)); do
-		$MZ $h1 -q -c 1 -t ip -p 20 -b bc -6 \
-			-A 2001:db8:2::1 \
-			-B $(tc_flower_addr $i)
-	done
-
-	MISMATCHES=$(
-		tc -j -s filter show dev $h2 ingress |
-		jq -r '[ .[] | select(.kind == "flower") | .options |
-		         values as $rule | .actions[].stats.packets |
-		         select(. != 1) | "\(.) on \($rule.keys.dst_ip)" ] |
-		       join(", ")'
-	)
-
-	test -z "$MISMATCHES"
-	check_err $? "Expected to capture 1 packet for each IP, but got $MISMATCHES"
+	offload_count=$(tc -j -s filter show dev $h2 ingress    |
+			jq -r '[ .[] | select(.kind == "flower") |
+			.options | .in_hw ]' | jq .[] | wc -l)
+	[[ $((offload_count - 1)) -eq $count ]]
+	if [[ $should_fail -eq 0 ]]; then
+		check_err $? "Offload mismatch"
+	else
+		check_err_fail $should_fail $? "Offload more than expacted"
+	fi
 }
 
 tc_flower_test()

tools/testing/selftests/net/forwarding/devlink_lib.sh

@@ -35,6 +35,12 @@ if [ $? -ne 0 ]; then
 	exit 1
 fi
 
+devlink dev help 2>&1 | grep info &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink dev info support"
+	exit 1
+fi
+
 ##############################################################################
 # Devlink helpers
 
@@ -413,3 +419,19 @@ devlink_trap_drop_cleanup()
 	kill $mz_pid && wait $mz_pid &> /dev/null
 	tc filter del dev $dev egress protocol $proto pref $pref handle $handle flower
 }
+
+devlink_port_by_netdev()
+{
+	local if_name=$1
+
+	devlink -j port show $if_name | jq -e '.[] | keys' | jq -r '.[]'
+}
+
+devlink_cpu_port_get()
+{
+	local cpu_dl_port_num=$(devlink port list | grep "$DEVLINK_DEV" |
+				grep cpu | cut -d/ -f3 | cut -d: -f1 |
+				sed -n '1p')
+
+	echo "$DEVLINK_DEV/$cpu_dl_port_num"
+}

tools/testing/selftests/net/forwarding/lib.sh

@@ -248,6 +248,33 @@ busywait()
 	done
 }
 
+not()
+{
+	"$@"
+	[[ $? != 0 ]]
+}
+
+grep_bridge_fdb()
+{
+	local addr=$1; shift
+	local word
+	local flag
+
+	if [ "$1" == "self" ] || [ "$1" == "master" ]; then
+		word=$1; shift
+		if [ "$1" == "-v" ]; then
+			flag=$1; shift
+		fi
+	fi
+
+	$@ | grep $addr | grep $flag "$word"
+}
+
+wait_for_offload()
+{
+	"$@" | grep -q offload
+}
+
 until_counter_is()
 {
 	local value=$1; shift
@@ -607,6 +634,16 @@ ethtool_stats_get()
 	ethtool -S $dev | grep "^ *$stat:" | head -n 1 | cut -d: -f2
 }
 
+qdisc_stats_get()
+{
+	local dev=$1; shift
+	local handle=$1; shift
+	local selector=$1; shift
+
+	tc -j -s qdisc show dev "$dev" \
+	    | jq '.[] | select(.handle == "'"$handle"'") | '"$selector"
+}
+
 humanize()
 {
 	local speed=$1; shift
@@ -1132,18 +1169,29 @@ flood_test()
 	flood_multicast_test $br_port $host1_if $host2_if
 }
 
-start_traffic()
+__start_traffic()
 {
+	local proto=$1; shift
 	local h_in=$1; shift    # Where the traffic egresses the host
 	local sip=$1; shift
 	local dip=$1; shift
 	local dmac=$1; shift
 
 	$MZ $h_in -p 8000 -A $sip -B $dip -c 0 \
-		-a own -b $dmac -t udp -q &
+		-a own -b $dmac -t "$proto" -q "$@" &
 	sleep 1
 }
 
+start_traffic()
+{
+	__start_traffic udp "$@"
+}
+
+start_tcp_traffic()
+{
+	__start_traffic tcp "$@"
+}
+
 stop_traffic()
 {
 	# Suppress noise from killing mausezahn.