Skip to content

L
linux
Commit 229de618 authored by Mike Frysinger's avatar Mike Frysinger Committed by David S. Miller
Browse files
Options

net/irda: convert bfin_sir to common Blackfin UART header 

No need to duplicate these defines now that the common Blackfin code has
unified these for all UART devices.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6ac3f664
Hide whitespace changes
Inline Side-by-side
Showing with 33 additions and 89 deletions
drivers/net/irda/bfin_sir.c
View file @ 229de618
......@@ -67,27 +67,27 @@ static void bfin_sir_stop_tx(struct bfin_sir_port *port)
disable_dma(port->tx_dma_channel);
#endif
while (!(SIR_UART_GET_LSR(port) & THRE)) {
while (!(UART_GET_LSR(port) & THRE)) {
cpu_relax();
continue;
}
SIR_UART_STOP_TX(port);
UART_CLEAR_IER(port, ETBEI);
}
static void bfin_sir_enable_tx(struct bfin_sir_port *port)
{
SIR_UART_ENABLE_TX(port);
UART_SET_IER(port, ETBEI);
}
static void bfin_sir_stop_rx(struct bfin_sir_port *port)
{
SIR_UART_STOP_RX(port);
UART_CLEAR_IER(port, ERBFI);
}
static void bfin_sir_enable_rx(struct bfin_sir_port *port)
{
SIR_UART_ENABLE_RX(port);
UART_SET_IER(port, ERBFI);
}
static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
......@@ -116,7 +116,7 @@ static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
do {
udelay(utime);
lsr = SIR_UART_GET_LSR(port);
lsr = UART_GET_LSR(port);
} while (!(lsr & TEMT) && count--);
/* The useconds for 1 bits to transmit */
......@@ -125,27 +125,27 @@ static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
/* Clear UCEN bit to reset the UART state machine
* and control registers
*/
val = SIR_UART_GET_GCTL(port);
val = UART_GET_GCTL(port);
val &= ~UCEN;
SIR_UART_PUT_GCTL(port, val);
UART_PUT_GCTL(port, val);
/* Set DLAB in LCR to Access THR RBR IER */
SIR_UART_SET_DLAB(port);
UART_SET_DLAB(port);
SSYNC();
SIR_UART_PUT_DLL(port, quot & 0xFF);
SIR_UART_PUT_DLH(port, (quot >> 8) & 0xFF);
UART_PUT_DLL(port, quot & 0xFF);
UART_PUT_DLH(port, (quot >> 8) & 0xFF);
SSYNC();
/* Clear DLAB in LCR */
SIR_UART_CLEAR_DLAB(port);
UART_CLEAR_DLAB(port);
SSYNC();
SIR_UART_PUT_LCR(port, lcr);
UART_PUT_LCR(port, lcr);
val = SIR_UART_GET_GCTL(port);
val = UART_GET_GCTL(port);
val |= UCEN;
SIR_UART_PUT_GCTL(port, val);
UART_PUT_GCTL(port, val);
ret = 0;
break;
......@@ -154,12 +154,12 @@ static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
break;
}
val = SIR_UART_GET_GCTL(port);
val = UART_GET_GCTL(port);
/* If not add the 'RPOLC', we can't catch the receive interrupt.
* It's related with the HW layout and the IR transiver.
*/
val |= IREN | RPOLC;
SIR_UART_PUT_GCTL(port, val);
UART_PUT_GCTL(port, val);
return ret;
}
......@@ -168,7 +168,7 @@ static int bfin_sir_is_receiving(struct net_device *dev)
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
if (!(SIR_UART_GET_IER(port) & ERBFI))
if (!(UART_GET_IER(port) & ERBFI))
return 0;
return self->rx_buff.state != OUTSIDE_FRAME;
}
......@@ -182,7 +182,7 @@ static void bfin_sir_tx_chars(struct net_device *dev)
if (self->tx_buff.len != 0) {
chr = *(self->tx_buff.data);
SIR_UART_PUT_CHAR(port, chr);
UART_PUT_CHAR(port, chr);
self->tx_buff.data++;
self->tx_buff.len--;
} else {
......@@ -206,8 +206,8 @@ static void bfin_sir_rx_chars(struct net_device *dev)
struct bfin_sir_port *port = self->sir_port;
unsigned char ch;
SIR_UART_CLEAR_LSR(port);
ch = SIR_UART_GET_CHAR(port);
UART_CLEAR_LSR(port);
ch = UART_GET_CHAR(port);
async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
dev->last_rx = jiffies;
}
......@@ -219,7 +219,7 @@ static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
while ((SIR_UART_GET_LSR(port) & DR))
while ((UART_GET_LSR(port) & DR))
bfin_sir_rx_chars(dev);
spin_unlock(&self->lock);
......@@ -233,7 +233,7 @@ static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
if (SIR_UART_GET_LSR(port) & THRE)
if (UART_GET_LSR(port) & THRE)
bfin_sir_tx_chars(dev);
spin_unlock(&self->lock);
......@@ -312,7 +312,7 @@ static void bfin_sir_dma_rx_chars(struct net_device *dev)
struct bfin_sir_port *port = self->sir_port;
int i;
SIR_UART_CLEAR_LSR(port);
UART_CLEAR_LSR(port);
for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
......@@ -430,11 +430,10 @@ static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev
unsigned short val;
bfin_sir_stop_rx(port);
SIR_UART_DISABLE_INTS(port);
val = SIR_UART_GET_GCTL(port);
val = UART_GET_GCTL(port);
val &= ~(UCEN | IREN | RPOLC);
SIR_UART_PUT_GCTL(port, val);
UART_PUT_GCTL(port, val);
#ifdef CONFIG_SIR_BFIN_DMA
disable_dma(port->tx_dma_channel);
......@@ -518,12 +517,12 @@ static void bfin_sir_send_work(struct work_struct *work)
* sending data. We also can set the speed, which will
* reset all the UART.
*/
val = SIR_UART_GET_GCTL(port);
val = UART_GET_GCTL(port);
val &= ~(IREN | RPOLC);
SIR_UART_PUT_GCTL(port, val);
UART_PUT_GCTL(port, val);
SSYNC();
val |= IREN | RPOLC;
SIR_UART_PUT_GCTL(port, val);
UART_PUT_GCTL(port, val);
SSYNC();
/* bfin_sir_set_speed(port, self->speed); */
......
drivers/net/irda/bfin_sir.h
View file @ 229de618
......@@ -26,7 +26,6 @@
#include <asm/cacheflush.h>
#include <asm/dma.h>
#include <asm/portmux.h>
#include <mach/bfin_serial_5xx.h>
#undef DRIVER_NAME
#ifdef CONFIG_SIR_BFIN_DMA
......@@ -83,64 +82,10 @@ struct bfin_sir_self {
#define DRIVER_NAME "bfin_sir"
#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR)
#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL)
#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH)
#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR)
#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL)
#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v)
#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v)
#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v)
#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
#ifdef CONFIG_BF54x
#define SIR_UART_GET_LSR(port) bfin_read16((port)->membase + OFFSET_LSR)
#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER_SET)
#define SIR_UART_SET_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_SET), v)
#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
#define SIR_UART_PUT_LSR(port, v) bfin_write16(((port)->membase + OFFSET_LSR), v)
#define SIR_UART_CLEAR_LSR(port) bfin_write16(((port)->membase + OFFSET_LSR), -1)
#define SIR_UART_SET_DLAB(port)
#define SIR_UART_CLEAR_DLAB(port)
#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_SET_IER(port, v)
#define SIR_UART_DISABLE_INTS(port) SIR_UART_CLEAR_IER(port, 0xF)
#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_LSR(port, TFI); SIR_UART_CLEAR_IER(port, ETBEI); } while (0)
#define SIR_UART_ENABLE_TX(port) do { SIR_UART_SET_IER(port, ETBEI); } while (0)
#define SIR_UART_STOP_RX(port) do { SIR_UART_CLEAR_IER(port, ERBFI); } while (0)
#define SIR_UART_ENABLE_RX(port) do { SIR_UART_SET_IER(port, ERBFI); } while (0)
#else
#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR)
#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER)
#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v)
#define SIR_UART_SET_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) | DLAB); } while (0)
#define SIR_UART_CLEAR_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) & ~DLAB); } while (0)
#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_PUT_IER(port, v)
#define SIR_UART_DISABLE_INTS(port) SIR_UART_PUT_IER(port, 0)
#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ETBEI); } while (0)
#define SIR_UART_ENABLE_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ETBEI); } while (0)
#define SIR_UART_STOP_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ERBFI); } while (0)
#define SIR_UART_ENABLE_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ERBFI); } while (0)
static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
{
unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
port->lsr |= (lsr & (BI|FE|PE|OE));
return lsr | port->lsr;
}
static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
{
port->lsr = 0;
bfin_read16(port->membase + OFFSET_LSR);
}
#endif
#define port_membase(port) (((struct bfin_sir_port *)(port))->membase)
#define get_lsr_cache(port) (((struct bfin_sir_port *)(port))->lsr)
#define put_lsr_cache(port, v) (((struct bfin_sir_port *)(port))->lsr = (v))
#include <asm/bfin_serial.h>
static const unsigned short per[][4] = {
/* rx pin tx pin NULL uart_number */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7