Commit 2450022a authored by Joe Perches's avatar Joe Perches Committed by David S. Miller

drivers/net: Add missing "space"

Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 60403fda
......@@ -747,7 +747,7 @@ static void init_82586_mem(struct net_device *dev)
int boguscnt = 50;
while (readw(shmem+iSCB_STATUS) == 0)
if (--boguscnt == 0) {
printk("%s: i82586 initialization timed out with status %04x,"
printk("%s: i82586 initialization timed out with status %04x, "
"cmd %04x.\n", dev->name,
readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
break;
......@@ -832,7 +832,7 @@ static void el16_rx(struct net_device *dev)
if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22
|| (pkt_len & 0xC000) != 0xC000) {
printk("%s: Rx frame at %#x corrupted, status %04x cmd %04x"
printk("%s: Rx frame at %#x corrupted, status %04x cmd %04x "
"next %04x data-buf @%04x %04x.\n", dev->name, rx_head,
frame_status, rfd_cmd, next_rx_frame, data_buffer_addr,
pkt_len);
......
......@@ -1945,13 +1945,13 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
err = pci_enable_device(pdev);
if(err){
printk(KERN_ERR "amd8111e: Cannot enable new PCI device,"
printk(KERN_ERR "amd8111e: Cannot enable new PCI device, "
"exiting.\n");
return err;
}
if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
printk(KERN_ERR "amd8111e: Cannot find PCI base address"
printk(KERN_ERR "amd8111e: Cannot find PCI base address, "
"exiting.\n");
err = -ENODEV;
goto err_disable_pdev;
......
......@@ -465,7 +465,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
/* Snarf the interrupt vector now. */
ret = request_irq(irq, &net_interrupt, 0, DRV_NAME, dev);
if (ret) {
printk (" AT1700 at %#3x is unusable due to a conflict on"
printk (" AT1700 at %#3x is unusable due to a conflict on "
"IRQ %d.\n", ioaddr, irq);
goto err_mca;
}
......
......@@ -2489,7 +2489,7 @@ static void __exit pppol2tp_exit(void)
module_init(pppol2tp_init);
module_exit(pppol2tp_exit);
MODULE_AUTHOR("Martijn van Oosterhout <kleptog@svana.org>,"
MODULE_AUTHOR("Martijn van Oosterhout <kleptog@svana.org>, "
"James Chapman <jchapman@katalix.com>");
MODULE_DESCRIPTION("PPP over L2TP over UDP");
MODULE_LICENSE("GPL");
......
......@@ -711,7 +711,7 @@ static int ql_mii_write_reg_ex(struct ql3_adapter *qdev,
if (ql_wait_for_mii_ready(qdev)) {
if (netif_msg_link(qdev))
printk(KERN_WARNING PFX
"%s: Timed out waiting for management port to"
"%s: Timed out waiting for management port to "
"get free before issuing command.\n",
qdev->ndev->name);
return -1;
......
......@@ -877,7 +877,7 @@ static u32 rr_handle_event(struct net_device *dev, u32 prodidx, u32 eidx)
dev->name);
goto drop;
case E_FLG_SYN_ERR:
printk(KERN_WARNING "%s: Flag sync. lost during"
printk(KERN_WARNING "%s: Flag sync. lost during "
"packet\n", dev->name);
goto drop;
case E_RX_INV_BUF:
......
......@@ -3772,7 +3772,7 @@ static int s2io_test_msi(struct s2io_nic *sp)
if (!sp->msi_detected) {
/* MSI(X) test failed, go back to INTx mode */
DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated"
DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
"using MSI(X) during test\n", sp->dev->name,
pci_name(pdev));
......@@ -6868,7 +6868,7 @@ static int s2io_add_isr(struct s2io_nic * sp)
/* If either data or addr is zero print it */
if(!(sp->msix_info[i].addr &&
sp->msix_info[i].data)) {
DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx"
DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
"Data:0x%lx\n",sp->desc[i],
(unsigned long long)
sp->msix_info[i].addr,
......@@ -6886,7 +6886,7 @@ static int s2io_add_isr(struct s2io_nic * sp)
/* If either data or addr is zero print it */
if(!(sp->msix_info[i].addr &&
sp->msix_info[i].data)) {
DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx"
DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
"Data:0x%lx\n",sp->desc[i],
(unsigned long long)
sp->msix_info[i].addr,
......
......@@ -419,7 +419,7 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
i = pci_set_dma_mask(pci_dev, DMA_32BIT_MASK);
if(i){
printk(KERN_ERR "sis900.c: architecture does not support"
printk(KERN_ERR "sis900.c: architecture does not support "
"32bit PCI busmaster DMA\n");
return i;
}
......@@ -1667,7 +1667,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
/* something strange happened !!! */
if (status & HIBERR) {
if(netif_msg_intr(sis_priv))
printk(KERN_INFO "%s: Abnormal interrupt,"
printk(KERN_INFO "%s: Abnormal interrupt, "
"status %#8.8x.\n", net_dev->name, status);
break;
}
......@@ -1820,7 +1820,7 @@ static int sis900_rx(struct net_device *net_dev)
* how the hardware will react to this kind
* of degenerated buffer */
if (netif_msg_rx_err(sis_priv))
printk(KERN_INFO "%s: Memory squeeze,"
printk(KERN_INFO "%s: Memory squeeze, "
"deferring packet.\n",
net_dev->name);
net_dev->stats.rx_dropped++;
......
......@@ -906,7 +906,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
SMC_SELECT_BANK(1);
base_address_register = inw( ioaddr + BASE );
if ( ioaddr != ( base_address_register >> 3 & 0x3E0 ) ) {
printk(CARDNAME ": IOADDR %x doesn't match configuration (%x)."
printk(CARDNAME ": IOADDR %x doesn't match configuration (%x). "
"Probably not a SMC chip\n",
ioaddr, base_address_register >> 3 & 0x3E0 );
/* well, the base address register didn't match. Must not have
......
......@@ -1338,7 +1338,7 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
if (debug > 2 &&
ioread8(ioaddr+ChipCmd) & CmdTxOn)
printk(KERN_WARNING "%s: "
"rhine_interrupt() Tx engine"
"rhine_interrupt() Tx engine "
"still on.\n", dev->name);
}
rhine_tx(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment