drivers/net: Add missing "space"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/3c507.c

@@ -747,7 +747,7 @@ static void init_82586_mem(struct net_device *dev)
 		int boguscnt = 50;
 		while (readw(shmem+iSCB_STATUS) == 0)
 			if (--boguscnt == 0) {
-				printk("%s: i82586 initialization timed out with status %04x,"
+				printk("%s: i82586 initialization timed out with status %04x, "
 					   "cmd %04x.\n", dev->name,
 					   readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
 				break;
@@ -832,7 +832,7 @@ static void el16_rx(struct net_device *dev)
 
 		if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22
 			|| (pkt_len & 0xC000) != 0xC000) {
-			printk("%s: Rx frame at %#x corrupted, status %04x cmd %04x"
+			printk("%s: Rx frame at %#x corrupted, status %04x cmd %04x "
 				   "next %04x data-buf @%04x %04x.\n", dev->name, rx_head,
 				   frame_status, rfd_cmd, next_rx_frame, data_buffer_addr,
 				   pkt_len);

drivers/net/amd8111e.c

@@ -1945,13 +1945,13 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
 
 	err = pci_enable_device(pdev);
 	if(err){
-		printk(KERN_ERR "amd8111e: Cannot enable new PCI device,"
+		printk(KERN_ERR "amd8111e: Cannot enable new PCI device, "
 			"exiting.\n");
 		return err;
 	}
 
 	if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
-		printk(KERN_ERR "amd8111e: Cannot find PCI base address"
+		printk(KERN_ERR "amd8111e: Cannot find PCI base address, "
 		       "exiting.\n");
 		err = -ENODEV;
 		goto err_disable_pdev;

drivers/net/at1700.c

@@ -465,7 +465,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
 	/* Snarf the interrupt vector now. */
 	ret = request_irq(irq, &net_interrupt, 0, DRV_NAME, dev);
 	if (ret) {
-		printk ("  AT1700 at %#3x is unusable due to a conflict on"
+		printk ("  AT1700 at %#3x is unusable due to a conflict on "
 				"IRQ %d.\n", ioaddr, irq);
 		goto err_mca;
 	}

drivers/net/pppol2tp.c

@@ -2489,7 +2489,7 @@ static void __exit pppol2tp_exit(void)
 module_init(pppol2tp_init);
 module_exit(pppol2tp_exit);
 
-MODULE_AUTHOR("Martijn van Oosterhout <kleptog@svana.org>,"
+MODULE_AUTHOR("Martijn van Oosterhout <kleptog@svana.org>, "
 	      "James Chapman <jchapman@katalix.com>");
 MODULE_DESCRIPTION("PPP over L2TP over UDP");
 MODULE_LICENSE("GPL");

drivers/net/qla3xxx.c

@@ -711,7 +711,7 @@ static int ql_mii_write_reg_ex(struct ql3_adapter *qdev,
 	if (ql_wait_for_mii_ready(qdev)) {
 		if (netif_msg_link(qdev))
 			printk(KERN_WARNING PFX
-			       "%s: Timed out waiting for management port to"
+			       "%s: Timed out waiting for management port to "
 			       "get free before issuing command.\n",
 			       qdev->ndev->name);
 		return -1;

drivers/net/rrunner.c

@@ -877,7 +877,7 @@ static u32 rr_handle_event(struct net_device *dev, u32 prodidx, u32 eidx)
 			       dev->name);
 			goto drop;
 		case E_FLG_SYN_ERR:
-			printk(KERN_WARNING "%s: Flag sync. lost during"
+			printk(KERN_WARNING "%s: Flag sync. lost during "
 			       "packet\n", dev->name);
 			goto drop;
 		case E_RX_INV_BUF:

drivers/net/s2io.c

@@ -3772,7 +3772,7 @@ static int s2io_test_msi(struct s2io_nic *sp)
 
 	if (!sp->msi_detected) {
 		/* MSI(X) test failed, go back to INTx mode */
-		DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated"
+		DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
 			"using MSI(X) during test\n", sp->dev->name,
 			pci_name(pdev));
 
@@ -6868,7 +6868,7 @@ static int s2io_add_isr(struct s2io_nic * sp)
 				/* If either data or addr is zero print it */
 				if(!(sp->msix_info[i].addr &&
 					sp->msix_info[i].data)) {
-					DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx"
+					DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
 						"Data:0x%lx\n",sp->desc[i],
 						(unsigned long long)
 						sp->msix_info[i].addr,
@@ -6886,7 +6886,7 @@ static int s2io_add_isr(struct s2io_nic * sp)
 				/* If either data or addr is zero print it */
 				if(!(sp->msix_info[i].addr &&
 					sp->msix_info[i].data)) {
-					DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx"
+					DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
 						"Data:0x%lx\n",sp->desc[i],
 						(unsigned long long)
 						sp->msix_info[i].addr,

drivers/net/sis900.c

@@ -419,7 +419,7 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
 
 	i = pci_set_dma_mask(pci_dev, DMA_32BIT_MASK);
 	if(i){
-		printk(KERN_ERR "sis900.c: architecture does not support"
+		printk(KERN_ERR "sis900.c: architecture does not support "
 			"32bit PCI busmaster DMA\n");
 		return i;
 	}
@@ -1667,7 +1667,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
 		/* something strange happened !!! */
 		if (status & HIBERR) {
 			if(netif_msg_intr(sis_priv))
-				printk(KERN_INFO "%s: Abnormal interrupt,"
+				printk(KERN_INFO "%s: Abnormal interrupt, "
 					"status %#8.8x.\n", net_dev->name, status);
 			break;
 		}
@@ -1820,7 +1820,7 @@ static int sis900_rx(struct net_device *net_dev)
 				 * how the hardware will react to this kind
 				 * of degenerated buffer */
 				if (netif_msg_rx_err(sis_priv))
-					printk(KERN_INFO "%s: Memory squeeze,"
+					printk(KERN_INFO "%s: Memory squeeze, "
 						"deferring packet.\n",
 						net_dev->name);
 				net_dev->stats.rx_dropped++;

drivers/net/smc9194.c

@@ -906,7 +906,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 	SMC_SELECT_BANK(1);
 	base_address_register = inw( ioaddr + BASE );
 	if ( ioaddr != ( base_address_register >> 3 & 0x3E0 ) )  {
-		printk(CARDNAME ": IOADDR %x doesn't match configuration (%x)."
+		printk(CARDNAME ": IOADDR %x doesn't match configuration (%x). "
 			"Probably not a SMC chip\n",
 			ioaddr, base_address_register >> 3 & 0x3E0 );
 		/* well, the base address register didn't match.  Must not have

drivers/net/via-rhine.c

@@ -1338,7 +1338,7 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
 				if (debug > 2 &&
 				    ioread8(ioaddr+ChipCmd) & CmdTxOn)
 					printk(KERN_WARNING "%s: "
-					       "rhine_interrupt() Tx engine"
+					       "rhine_interrupt() Tx engine "
 					       "still on.\n", dev->name);
 			}
 			rhine_tx(dev);