Commit 24eb90ab authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: fix lite5200 ethernet phy address
  powerpc/5200: Fix build error in sound code.
  powerpc/5200: fix oops during going to standby
  powerpc/5200: add lite5200 onboard I2C eeprom and flash
  maintainers: Add git trees for SPI and device tree
  of: Drop properties with "/" in their name
parents ddc39f90 2b07be24
......@@ -4212,6 +4212,7 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Grant Likely <grant.likely@secretlab.ca>
L: devicetree-discuss@lists.ozlabs.org
W: http://fdt.secretlab.ca
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
F: drivers/of
F: include/linux/of*.h
......@@ -5384,6 +5385,7 @@ M: David Brownell <dbrownell@users.sourceforge.net>
M: Grant Likely <grant.likely@secretlab.ca>
L: spi-devel-general@lists.sourceforge.net
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
F: Documentation/spi/
F: drivers/spi/
......
......@@ -134,12 +134,16 @@ gpio@b00 {
compatible = "fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@c00 {
compatible = "fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
......@@ -230,8 +234,8 @@ mdio@3000 {
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
phy0: ethernet-phy@1 {
reg = <1>;
phy0: ethernet-phy@0 {
reg = <0>;
};
};
......@@ -255,7 +259,13 @@ i2c@3d40 {
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
};
sram@8000 {
compatible = "fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
......@@ -281,4 +291,18 @@ pci@f0000d00 {
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
localbus {
compatible = "fsl,mpc5200-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xff000000 0x01000000>;
flash@0,0 {
compatible = "amd,am29lv652d", "cfi-flash";
reg = <0 0 0x01000000>;
bank-width = <1>;
};
};
};
......@@ -259,6 +259,11 @@ i2c@3d40 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
};
sram@8000 {
......
......@@ -64,10 +64,19 @@ int mpc52xx_pm_prepare(void)
{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
{}
};
struct resource res;
/* map the whole register space */
np = of_find_matching_node(NULL, immr_ids);
mbar = of_iomap(np, 0);
if (of_address_to_resource(np, 0, &res)) {
pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n");
of_node_put(np);
return -ENOSYS;
}
mbar = ioremap(res.start, 0xc000); /* we should map whole region including SRAM */
of_node_put(np);
if (!mbar) {
pr_err("mpc52xx_pm_prepare(): could not map registers\n");
......
......@@ -209,6 +209,9 @@ void proc_device_tree_add_node(struct device_node *np,
for (pp = np->properties; pp != NULL; pp = pp->next) {
p = pp->name;
if (strchr(p, '/'))
continue;
if (duplicate_name(de, p))
p = fixup_name(np, de, p);
......
......@@ -73,7 +73,7 @@ struct psc_dma {
};
/* Utility for retrieving psc_dma_stream structure from a substream */
inline struct psc_dma_stream *
static inline struct psc_dma_stream *
to_psc_dma_stream(struct snd_pcm_substream *substream, struct psc_dma *psc_dma)
{
if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment