Commit 24eca4b4 authored by Jiangfeng Xiao's avatar Jiangfeng Xiao Committed by David S. Miller

net: hisilicon: HI13X1_GMAX need dreq reset at first

HI13X1_GMAC delete request for soft reset at first,
otherwise, the subsequent initialization will not
take effect.
Signed-off-by: default avatarJiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0331f855
......@@ -16,6 +16,8 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#define SC_PPE_RESET_DREQ 0x026C
#define PPE_CFG_RX_ADDR 0x100
#define PPE_CFG_POOL_GRP 0x300
#define PPE_CFG_RX_BUF_SIZE 0x400
......@@ -61,6 +63,8 @@
#define PPE_HIS_RX_PKT_CNT 0x804
#define RESET_DREQ_ALL 0xffffffff
/* REG_INTERRUPT */
#define RCV_INT BIT(10)
#define RCV_NOBUF BIT(8)
......@@ -168,6 +172,9 @@ struct rx_desc {
struct hip04_priv {
void __iomem *base;
#if defined(CONFIG_HI13X1_GMAC)
void __iomem *sysctrl_base;
#endif
int phy_mode;
int chan;
unsigned int port;
......@@ -244,6 +251,13 @@ static void hip04_config_port(struct net_device *ndev, u32 speed, u32 duplex)
writel_relaxed(val, priv->base + GE_MODE_CHANGE_REG);
}
static void hip04_reset_dreq(struct hip04_priv *priv)
{
#if defined(CONFIG_HI13X1_GMAC)
writel_relaxed(RESET_DREQ_ALL, priv->sysctrl_base + SC_PPE_RESET_DREQ);
#endif
}
static void hip04_reset_ppe(struct hip04_priv *priv)
{
u32 val, tmp, timeout = 0;
......@@ -853,6 +867,15 @@ static int hip04_mac_probe(struct platform_device *pdev)
goto init_fail;
}
#if defined(CONFIG_HI13X1_GMAC)
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
priv->sysctrl_base = devm_ioremap_resource(d, res);
if (IS_ERR(priv->sysctrl_base)) {
ret = PTR_ERR(priv->sysctrl_base);
goto init_fail;
}
#endif
ret = of_parse_phandle_with_fixed_args(node, "port-handle", 2, 0, &arg);
if (ret < 0) {
dev_warn(d, "no port-handle\n");
......@@ -921,6 +944,7 @@ static int hip04_mac_probe(struct platform_device *pdev)
ndev->irq = irq;
netif_napi_add(ndev, &priv->napi, hip04_rx_poll, NAPI_POLL_WEIGHT);
hip04_reset_dreq(priv);
hip04_reset_ppe(priv);
if (priv->phy_mode == PHY_INTERFACE_MODE_MII)
hip04_config_port(ndev, SPEED_100, DUPLEX_FULL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment