Commit 257b49e3 authored by Markus Mayer's avatar Markus Mayer Committed by Christian Daudt

ARM: bcm281xx: Board specific reboot code

This patch adds the code needed to trigger a reboot on the bcm281xx
family.
Signed-off-by: default avatarMarkus Mayer <markus.mayer@linaro.org>
Reviewed-by: default avatarTim Kryger <tim.kryger@linaro.org>
Reviewed-by: default avatarMatt Porter <matt.porter@linaro.org>
Reviewed-by: default avatarAlex Elder <alex.elder@linaro.org>
Acked-by: default avatarChristian Daudt <csd@broadcom.com>
parent 6dea0df2
#
# Copyright (C) 2012 Broadcom Corporation
# Copyright (C) 2012-2013 Broadcom Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
......@@ -10,6 +10,6 @@
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
obj-$(CONFIG_ARCH_BCM) := board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o
obj-$(CONFIG_ARCH_BCM) := board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
/*
* Copyright (C) 2012 Broadcom Corporation
* Copyright (C) 2012-2013 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
......@@ -21,8 +21,8 @@
#include <asm/mach/time.h>
#include <asm/hardware/cache-l2x0.h>
#include "bcm_kona_smc.h"
#include "kona.h"
static int __init kona_l2_cache_init(void)
{
......@@ -40,13 +40,26 @@ static int __init kona_l2_cache_init(void)
return 0;
}
static void bcm_board_setup_restart(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "bcm,bcm11351");
if (np) {
if (of_device_is_available(np))
bcm_kona_setup_restart();
of_node_put(np);
}
/* Restart setup for other boards goes here */
}
static void __init board_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL,
&platform_bus);
bcm_kona_smc_init();
bcm_board_setup_restart();
kona_l2_cache_init();
}
......@@ -55,5 +68,6 @@ static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
.init_time = clocksource_of_init,
.init_machine = board_init,
.restart = bcm_kona_restart,
.dt_compat = bcm11351_dt_compat,
MACHINE_END
/*
* Copyright (C) 2013 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/of_address.h>
#include <asm/io.h>
#include "kona.h"
static void __iomem *watchdog_base;
void bcm_kona_setup_restart(void)
{
struct device_node *np_wdog;
/*
* The assumption is that whoever calls bcm_kona_setup_restart()
* also needs a Kona Watchdog Timer entry in Device Tree, i.e. we
* report an error if the DT entry is missing.
*/
np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
if (!np_wdog) {
pr_err("brcm,kona-wdt not found in DT, reboot disabled\n");
return;
}
watchdog_base = of_iomap(np_wdog, 0);
WARN(!watchdog_base, "failed to map watchdog base");
of_node_put(np_wdog);
}
#define SECWDOG_OFFSET 0x00000000
#define SECWDOG_RESERVED_MASK 0xE2000000
#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
#define SECWDOG_EN_MASK 0x08000000
#define SECWDOG_SRSTEN_MASK 0x04000000
#define SECWDOG_CLKS_SHIFT 20
#define SECWDOG_LOCK_SHIFT 0
void bcm_kona_restart(enum reboot_mode mode, const char *cmd)
{
uint32_t val;
if (!watchdog_base)
panic("Watchdog not mapped. Reboot failed.\n");
/* Enable watchdog2 with very short timeout. */
val = readl(watchdog_base + SECWDOG_OFFSET);
val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
(0x8 << SECWDOG_CLKS_SHIFT) |
(0x8 << SECWDOG_LOCK_SHIFT);
writel(val, watchdog_base + SECWDOG_OFFSET);
while (1)
;
}
/*
* Copyright (C) 2013 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/reboot.h>
void bcm_kona_setup_restart(void);
void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment