drm/i915: Mark debug mod options as _unsafe

We don't want random people to touch these.

Especially true since we've just screwed up SKL by holding it way too
long under the preliminary flag because of some ABI issues. And now
there's howtos all over the internets about how to set this. Same
pretty much for anything else.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: drop fastboot changes, that option is gone.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_params.c

@@ -61,7 +61,7 @@ MODULE_PARM_DESC(modeset,
 	"Use kernel modesetting [KMS] (0=disable, "
 	"1=on, -1=force vga console preference [default])");
 
-module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
+module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
 MODULE_PARM_DESC(panel_ignore_lid,
 	"Override lid status (0=autodetect, 1=autodetect disabled [default], "
 	"-1=force lid closed, -2=force lid open)");
@@ -84,17 +84,17 @@ MODULE_PARM_DESC(enable_fbc,
 	"Enable frame buffer compression for power savings "
 	"(default: -1 (use per-chip default))");
 
-module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
+module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
 MODULE_PARM_DESC(lvds_channel_mode,
 	 "Specify LVDS channel mode "
 	 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
 
-module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
+module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
 MODULE_PARM_DESC(lvds_use_ssc,
 	"Use Spread Spectrum Clock with panels [LVDS/eDP] "
 	"(default: auto from VBT)");
 
-module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
+module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
 MODULE_PARM_DESC(vbt_sdvo_panel_type,
 	"Override/Ignore selection of SDVO panel mode in the VBT "
 	"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
@@ -102,7 +102,7 @@ MODULE_PARM_DESC(vbt_sdvo_panel_type,
 module_param_named_unsafe(reset, i915.reset, bool, 0600);
 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
 
-module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
+module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
 MODULE_PARM_DESC(enable_hangcheck,
 	"Periodically check GPU activity for detecting hangs. "
 	"WARNING: Disabling this can cause system wide hangs. "
@@ -113,23 +113,23 @@ MODULE_PARM_DESC(enable_ppgtt,
 	"Override PPGTT usage. "
 	"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
 
-module_param_named(enable_execlists, i915.enable_execlists, int, 0400);
+module_param_named_unsafe(enable_execlists, i915.enable_execlists, int, 0400);
 MODULE_PARM_DESC(enable_execlists,
 	"Override execlists usage. "
 	"(-1=auto [default], 0=disabled, 1=enabled)");
 
-module_param_named(enable_psr, i915.enable_psr, int, 0600);
+module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
 
-module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
+module_param_named_unsafe(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
 MODULE_PARM_DESC(preliminary_hw_support,
 	"Enable preliminary hardware support.");
 
-module_param_named(disable_power_well, i915.disable_power_well, int, 0600);
+module_param_named_unsafe(disable_power_well, i915.disable_power_well, int, 0600);
 MODULE_PARM_DESC(disable_power_well,
 	"Disable the power well when possible (default: true)");
 
-module_param_named(enable_ips, i915.enable_ips, int, 0600);
+module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);
 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
 
 module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600);
@@ -142,7 +142,7 @@ MODULE_PARM_DESC(load_detect_test,
 	"Force-enable the VGA load detect code for testing (default:false). "
 	"For developers only.");
 
-module_param_named(invert_brightness, i915.invert_brightness, int, 0600);
+module_param_named_unsafe(invert_brightness, i915.invert_brightness, int, 0600);
 MODULE_PARM_DESC(invert_brightness,
 	"Invert backlight brightness "
 	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
@@ -153,14 +153,14 @@ MODULE_PARM_DESC(invert_brightness,
 module_param_named(disable_display, i915.disable_display, bool, 0600);
 MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
 
-module_param_named(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
+module_param_named_unsafe(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
 MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)");
 
-module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
+module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
 MODULE_PARM_DESC(enable_cmd_parser,
 		 "Enable command parsing (1=enabled [default], 0=disabled)");
 
-module_param_named(use_mmio_flip, i915.use_mmio_flip, int, 0600);
+module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600);
 MODULE_PARM_DESC(use_mmio_flip,
 		 "use MMIO flips (-1=never, 0=driver discretion [default], 1=always)");