Merge branches 'release' and 'menlo' into release

Conflicts:

	drivers/acpi/video.c
Signed-off-by: Len Brown <len.brown@intel.com>

Documentation/thermal/sysfs-api.txt

+Generic Thermal Sysfs driver How To
+=========================
+
+Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
+
+Updated: 2 January 2008
+
+Copyright (c)  2008 Intel Corporation
+
+
+0. Introduction
+
+The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
+and thermal cooling devices (fan, processor...) to register with the thermal management
+solution and to be a part of it.
+
+This how-to focusses on enabling new thermal zone and cooling devices to participate
+in thermal management.
+This solution is platform independent and any type of thermal zone devices and
+cooling devices should be able to make use of the infrastructure.
+
+The main task of the thermal sysfs driver is to expose thermal zone attributes as well
+as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on inputs
+from thermal zone attributes (the current temperature and trip point temperature)
+and throttle appropriate devices.
+
+[0-*]	denotes any positive number starting from 0
+[1-*]	denotes any positive number starting from 1
+
+1. thermal sysfs driver interface functions
+
+1.1 thermal zone device interface
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
+				void *devdata, struct thermal_zone_device_ops *ops)
+
+	This interface function adds a new thermal zone device (sensor) to
+	/sys/class/thermal folder as thermal_zone[0-*].
+	It tries to bind all the thermal cooling devices registered at the same time.
+
+	name: the thermal zone name.
+	trips: the total number of trip points this thermal zone supports.
+	devdata: device private data
+	ops: thermal zone device callbacks.
+		.bind: bind the thermal zone device with a thermal cooling device.
+		.unbind: unbing the thermal zone device with a thermal cooling device.
+		.get_temp: get the current temperature of the thermal zone.
+		.get_mode: get the current mode (user/kernel) of the thermal zone.
+			   "kernel" means thermal management is done in kernel.
+			   "user" will prevent kernel thermal driver actions upon trip points
+			   so that user applications can take charge of thermal management.
+		.set_mode: set the mode (user/kernel) of the thermal zone.
+		.get_trip_type: get the type of certain trip point.
+		.get_trip_temp: get the temperature above which the certain trip point
+				will be fired.
+
+1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
+
+	This interface function removes the thermal zone device.
+	It deletes the corresponding entry form /sys/class/thermal folder and unbind all
+	the thermal cooling devices it uses.
+
+1.2 thermal cooling device interface
+1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
+					void *devdata, struct thermal_cooling_device_ops *)
+
+	This interface function adds a new thermal cooling device (fan/processor/...) to
+	/sys/class/thermal/ folder as cooling_device[0-*].
+	It tries to bind itself to all the thermal zone devices register at the same time.
+	name: the cooling device name.
+	devdata: device private data.
+	ops: thermal cooling devices callbacks.
+		.get_max_state: get the Maximum throttle state of the cooling device.
+		.get_cur_state: get the Current throttle state of the cooling device.
+		.set_cur_state: set the Current throttle state of the cooling device.
+
+1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
+
+	This interface function remove the thermal cooling device.
+	It deletes the corresponding entry form /sys/class/thermal folder and unbind
+	itself from all	the thermal zone devices using it.
+
+1.3 interface for binding a thermal zone device with a thermal cooling device
+1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
+			int trip, struct thermal_cooling_device *cdev);
+
+	This interface function bind a thermal cooling device to the certain trip point
+	of a thermal zone device.
+	This function is usually called in the thermal zone device .bind callback.
+	tz: the thermal zone device
+	cdev: thermal cooling device
+	trip: indicates which trip point the cooling devices is associated with
+		 in this thermal zone.
+
+1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
+				int trip, struct thermal_cooling_device *cdev);
+
+	This interface function unbind a thermal cooling device from the certain trip point
+	of a thermal zone device.
+	This function is usually called in the thermal zone device .unbind callback.
+	tz: the thermal zone device
+	cdev: thermal cooling device
+	trip: indicates which trip point the cooling devices is associated with
+		in this thermal zone.
+
+2. sysfs attributes structure
+
+RO	read only value
+RW	read/write value
+
+All thermal sysfs attributes will be represented under /sys/class/thermal
+/sys/class/thermal/
+
+Thermal zone device sys I/F, created once it's registered:
+|thermal_zone[0-*]:
+	|-----type:			Type of the thermal zone
+	|-----temp:			Current temperature
+	|-----mode:			Working mode of the thermal zone
+	|-----trip_point_[0-*]_temp:	Trip point temperature
+	|-----trip_point_[0-*]_type:	Trip point type
+
+Thermal cooling device sys I/F, created once it's registered:
+|cooling_device[0-*]:
+	|-----type :			Type of the cooling device(processor/fan/...)
+	|-----max_state:		Maximum cooling state of the cooling device
+	|-----cur_state:		Current cooling state of the cooling device
+
+
+These two dynamic attributes are created/removed in pairs.
+They represent the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful exection.
+
+|thermal_zone[0-*]
+	|-----cdev[0-*]:		The [0-*]th cooling device in the current thermal zone
+	|-----cdev[0-*]_trip_point:	Trip point that cdev[0-*] is associated with
+
+
+***************************
+* Thermal zone attributes *
+***************************
+
+type				Strings which represent the thermal zone type.
+				This is given by thermal zone driver as part of registration.
+				Eg: "ACPI thermal zone" indicates it's a ACPI thermal device
+				RO
+				Optional
+
+temp				Current temperature as reported by thermal zone (sensor)
+				Unit: degree celsius
+				RO
+				Required
+
+mode				One of the predifned values in [kernel, user]
+				This file gives information about the algorithm
+				that is currently managing the thermal zone.
+				It can be either default kernel based algorithm
+				or user space application.
+				RW
+				Optional
+				kernel	= Thermal management in kernel thermal zone driver.
+				user	= Preventing kernel thermal zone driver actions upon
+					  trip points so that user application can take full
+					  charge of the thermal management.
+
+trip_point_[0-*]_temp		The temperature above which trip point will be fired
+				Unit: degree celsius
+				RO
+				Optional
+
+trip_point_[0-*]_type 		Strings which indicate the type of the trip point
+				Eg. it can be one of critical, hot, passive,
+				    active[0-*] for ACPI thermal zone.
+				RO
+				Optional
+
+cdev[0-*]			Sysfs link to the thermal cooling device node where the sys I/F
+				for cooling device throttling control represents.
+				RO
+				Optional
+
+cdev[0-*]_trip_point		The trip point with which cdev[0-*] is assocated in this thermal zone
+				-1 means the cooling device is not associated with any trip point.
+				RO
+				Optional
+
+******************************
+* Cooling device  attributes *
+******************************
+
+type				String which represents the type of device
+				eg: For generic ACPI: this should be "Fan",
+				"Processor" or "LCD"
+				eg. For memory controller device on intel_menlow platform:
+				this should be "Memory controller"
+				RO
+				Optional
+
+max_state			The maximum permissible cooling state of this cooling device.
+				RO
+				Required
+
+cur_state			The current cooling state of this cooling device.
+				the value can any integer numbers between 0 and max_state,
+				cur_state == 0 means no cooling
+				cur_state == max_state means the maximum cooling.
+				RW
+				Required
+
+3. A simple implementation
+
+ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
+If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
+it may register itself as a thermale_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as thermal_cooling_device.
+If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
+the sys I/F structure will be built like this:
+
+/sys/class/thermal:
+
+|thermal_zone1:
+	|-----type:			ACPI thermal zone
+	|-----temp:			37
+	|-----mode:			kernel
+	|-----trip_point_0_temp:	100
+	|-----trip_point_0_type:	critical
+	|-----trip_point_1_temp:	80
+	|-----trip_point_1_type:	passive
+	|-----trip_point_2_temp:	70
+	|-----trip_point_2_type:	active[0]
+	|-----trip_point_3_temp:	60
+	|-----trip_point_3_type:	active[1]
+	|-----cdev0:			--->/sys/class/thermal/cooling_device0
+	|-----cdev0_trip_point:		1	/* cdev0 can be used for passive */
+	|-----cdev1:			--->/sys/class/thermal/cooling_device3
+	|-----cdev1_trip_point:		2	/* cdev1 can be used for active[0]*/
+
+|cooling_device0:
+	|-----type:			Processor
+	|-----max_state:		8
+	|-----cur_state:		0
+
+|cooling_device3:
+	|-----type:			Fan
+	|-----max_state:		2
+	|-----cur_state:		0

drivers/Kconfig

@@ -60,6 +60,8 @@ source "drivers/power/Kconfig"
 
 source "drivers/hwmon/Kconfig"
 
+source "drivers/thermal/Kconfig"
+
 source "drivers/watchdog/Kconfig"
 
 source "drivers/ssb/Kconfig"

drivers/Makefile

@@ -65,6 +65,7 @@ obj-y				+= i2c/
 obj-$(CONFIG_W1)		+= w1/
 obj-$(CONFIG_POWER_SUPPLY)	+= power/
 obj-$(CONFIG_HWMON)		+= hwmon/
+obj-$(CONFIG_THERMAL)		+= thermal/
 obj-$(CONFIG_WATCHDOG)		+= watchdog/
 obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_MD)		+= md/

drivers/acpi/Kconfig

@@ -186,6 +186,7 @@ config ACPI_HOTPLUG_CPU
 config ACPI_THERMAL
 	tristate "Thermal Zone"
 	depends on ACPI_PROCESSOR
+	select THERMAL
 	default y
 	help
 	  This driver adds support for ACPI thermal zones.  Most mobile and

drivers/acpi/bus.c

@@ -122,6 +122,31 @@ int acpi_bus_get_status(struct acpi_device *device)
 
 EXPORT_SYMBOL(acpi_bus_get_status);
 
+void acpi_bus_private_data_handler(acpi_handle handle,
+				   u32 function, void *context)
+{
+	return;
+}
+EXPORT_SYMBOL(acpi_bus_private_data_handler);
+
+int acpi_bus_get_private_data(acpi_handle handle, void **data)
+{
+	acpi_status status = AE_OK;
+
+	if (!*data)
+		return -EINVAL;
+
+	status = acpi_get_data(handle, acpi_bus_private_data_handler, data);
+	if (ACPI_FAILURE(status) || !*data) {
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n",
+				handle));
+		return -ENODEV;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(acpi_bus_get_private_data);
+
 /* --------------------------------------------------------------------------
                                  Power Management
    -------------------------------------------------------------------------- */

drivers/acpi/fan.c

@@ -30,7 +30,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
-
+#include <linux/thermal.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -68,9 +68,55 @@ static struct acpi_driver acpi_fan_driver = {
 		},
 };
 
+/* thermal cooling device callbacks */
+static int fan_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	/* ACPI fan device only support two states: ON/OFF */
+	return sprintf(buf, "1\n");
+}
+
+static int fan_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	int state;
+	int result;
+
+	if (!device)
+		return -EINVAL;
+
+	result = acpi_bus_get_power(device->handle, &state);
+	if (result)
+		return result;
+
+	return sprintf(buf, "%s\n", state == ACPI_STATE_D3 ? "0" :
+			 (state == ACPI_STATE_D0 ? "1" : "unknown"));
+}
+
+static int
+fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+{
+	struct acpi_device *device = cdev->devdata;
+	int result;
+
+	if (!device || (state != 0 && state != 1))
+		return -EINVAL;
+
+	result = acpi_bus_set_power(device->handle,
+				state ? ACPI_STATE_D0 : ACPI_STATE_D3);
+
+	return result;
+}
+
+static struct thermal_cooling_device_ops fan_cooling_ops = {
+	.get_max_state = fan_get_max_state,
+	.get_cur_state = fan_get_cur_state,
+	.set_cur_state = fan_set_cur_state,
+};
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_PROCFS
 
 static struct proc_dir_entry *acpi_fan_dir;
 
@@ -171,7 +217,17 @@ static int acpi_fan_remove_fs(struct acpi_device *device)
 
 	return 0;
 }
+#else
+static int acpi_fan_add_fs(struct acpi_device *device)
+{
+	return 0;
+}
 
+static int acpi_fan_remove_fs(struct acpi_device *device)
+{
+	return 0;
+}
+#endif
 /* --------------------------------------------------------------------------
                                  Driver Interface
    -------------------------------------------------------------------------- */
@@ -179,9 +235,8 @@ static int acpi_fan_remove_fs(struct acpi_device *device)
 static int acpi_fan_add(struct acpi_device *device)
 {
 	int result = 0;
-	struct acpi_fan *fan = NULL;
 	int state = 0;
-
+	struct thermal_cooling_device *cdev;
 
 	if (!device)
 		return -EINVAL;
@@ -199,6 +254,25 @@ static int acpi_fan_add(struct acpi_device *device)
 	acpi_bus_set_power(device->handle, state);
 	device->flags.force_power_state = 0;
 
+	cdev = thermal_cooling_device_register("Fan", device,
+						&fan_cooling_ops);
+	if (cdev)
+		printk(KERN_INFO PREFIX
+			"%s is registered as cooling_device%d\n",
+			device->dev.bus_id, cdev->id);
+	else
+		goto end;
+	acpi_driver_data(device) = cdev;
+	result = sysfs_create_link(&device->dev.kobj, &cdev->device.kobj,
+					"thermal_cooling");
+	if (result)
+		return result;
+
+	result = sysfs_create_link(&cdev->device.kobj, &device->dev.kobj,
+                                       "device");
+        if (result)
+                return result;
+
 	result = acpi_fan_add_fs(device);
 	if (result)
 		goto end;
@@ -208,18 +282,20 @@ static int acpi_fan_add(struct acpi_device *device)
 	       !device->power.state ? "on" : "off");
 
       end:
-	if (result)
-		kfree(fan);
-
 	return result;
 }
 
 static int acpi_fan_remove(struct acpi_device *device, int type)
 {
-	if (!device || !acpi_driver_data(device))
+	struct thermal_cooling_device *cdev = acpi_driver_data(device);
+
+	if (!device || !cdev)
 		return -EINVAL;
 
 	acpi_fan_remove_fs(device);
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+	sysfs_remove_link(&cdev->device.kobj, "device");
+	thermal_cooling_device_unregister(cdev);
 
 	return 0;
 }
@@ -261,10 +337,12 @@ static int __init acpi_fan_init(void)
 	int result = 0;
 
 
+#ifdef CONFIG_ACPI_PROCFS
 	acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir);
 	if (!acpi_fan_dir)
 		return -ENODEV;
 	acpi_fan_dir->owner = THIS_MODULE;
+#endif
 
 	result = acpi_bus_register_driver(&acpi_fan_driver);
 	if (result < 0) {

drivers/acpi/processor_core.c

@@ -668,6 +668,24 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
 
 	acpi_processor_power_init(pr, device);
 
+	pr->cdev = thermal_cooling_device_register("Processor", device,
+						&processor_cooling_ops);
+	if (pr->cdev)
+		printk(KERN_INFO PREFIX
+			"%s is registered as cooling_device%d\n",
+			device->dev.bus_id, pr->cdev->id);
+	else
+		goto end;
+
+	result = sysfs_create_link(&device->dev.kobj, &pr->cdev->device.kobj,
+					"thermal_cooling");
+	if (result)
+		return result;
+	result = sysfs_create_link(&pr->cdev->device.kobj, &device->dev.kobj,
+					"device");
+	if (result)
+		return result;
+
 	if (pr->flags.throttling) {
 		printk(KERN_INFO PREFIX "%s [%s] (supports",
 		       acpi_device_name(device), acpi_device_bid(device));
@@ -791,6 +809,11 @@ static int acpi_processor_remove(struct acpi_device *device, int type)
 
 	acpi_processor_remove_fs(device);
 
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+	sysfs_remove_link(&pr->cdev->device.kobj, "device");
+	thermal_cooling_device_unregister(pr->cdev);
+	pr->cdev = NULL;
+
 	processors[pr->id] = NULL;
 
 	kfree(pr);

drivers/acpi/processor_thermal.c

@@ -32,6 +32,7 @@
 #include <linux/cpufreq.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/sysdev.h>
 
 #include <asm/uaccess.h>
 
@@ -93,6 +94,9 @@ static int acpi_processor_apply_limit(struct acpi_processor *pr)
  * _any_ cpufreq driver and not only the acpi-cpufreq driver.
  */
 
+#define CPUFREQ_THERMAL_MIN_STEP 0
+#define CPUFREQ_THERMAL_MAX_STEP 3
+
 static unsigned int cpufreq_thermal_reduction_pctg[NR_CPUS];
 static unsigned int acpi_thermal_cpufreq_is_init = 0;
 
@@ -109,8 +113,9 @@ static int acpi_thermal_cpufreq_increase(unsigned int cpu)
 	if (!cpu_has_cpufreq(cpu))
 		return -ENODEV;
 
-	if (cpufreq_thermal_reduction_pctg[cpu] < 60) {
-		cpufreq_thermal_reduction_pctg[cpu] += 20;
+	if (cpufreq_thermal_reduction_pctg[cpu] <
+		CPUFREQ_THERMAL_MAX_STEP) {
+		cpufreq_thermal_reduction_pctg[cpu]++;
 		cpufreq_update_policy(cpu);
 		return 0;
 	}
@@ -123,8 +128,9 @@ static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
 	if (!cpu_has_cpufreq(cpu))
 		return -ENODEV;
 
-	if (cpufreq_thermal_reduction_pctg[cpu] > 20)
-		cpufreq_thermal_reduction_pctg[cpu] -= 20;
+	if (cpufreq_thermal_reduction_pctg[cpu] >
+		(CPUFREQ_THERMAL_MIN_STEP + 1))
+		cpufreq_thermal_reduction_pctg[cpu]--;
 	else
 		cpufreq_thermal_reduction_pctg[cpu] = 0;
 	cpufreq_update_policy(cpu);
@@ -143,7 +149,7 @@ static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb,
 
 	max_freq =
 	    (policy->cpuinfo.max_freq *
-	     (100 - cpufreq_thermal_reduction_pctg[policy->cpu])) / 100;
+	     (100 - cpufreq_thermal_reduction_pctg[policy->cpu] * 20)) / 100;
 
 	cpufreq_verify_within_limits(policy, 0, max_freq);
 
@@ -155,6 +161,32 @@ static struct notifier_block acpi_thermal_cpufreq_notifier_block = {
 	.notifier_call = acpi_thermal_cpufreq_notifier,
 };
 
+static int cpufreq_get_max_state(unsigned int cpu)
+{
+	if (!cpu_has_cpufreq(cpu))
+		return 0;
+
+	return CPUFREQ_THERMAL_MAX_STEP;
+}
+
+static int cpufreq_get_cur_state(unsigned int cpu)
+{
+	if (!cpu_has_cpufreq(cpu))
+		return 0;
+
+	return cpufreq_thermal_reduction_pctg[cpu];
+}
+
+static int cpufreq_set_cur_state(unsigned int cpu, int state)
+{
+	if (!cpu_has_cpufreq(cpu))
+		return 0;
+
+	cpufreq_thermal_reduction_pctg[cpu] = state;
+	cpufreq_update_policy(cpu);
+	return 0;
+}
+
 void acpi_thermal_cpufreq_init(void)
 {
 	int i;
@@ -179,6 +211,20 @@ void acpi_thermal_cpufreq_exit(void)
 }
 
 #else				/* ! CONFIG_CPU_FREQ */
+static int cpufreq_get_max_state(unsigned int cpu)
+{
+	return 0;
+}
+
+static int cpufreq_get_cur_state(unsigned int cpu)
+{
+	return 0;
+}
+
+static int cpufreq_set_cur_state(unsigned int cpu, int state)
+{
+	return 0;
+}
 
 static int acpi_thermal_cpufreq_increase(unsigned int cpu)
 {
@@ -310,6 +356,84 @@ int acpi_processor_get_limit_info(struct acpi_processor *pr)
 	return 0;
 }
 
+/* thermal coolign device callbacks */
+static int acpi_processor_max_state(struct acpi_processor *pr)
+{
+	int max_state = 0;
+
+	/*
+	 * There exists four states according to
+	 * cpufreq_thermal_reduction_ptg. 0, 1, 2, 3
+	 */
+	max_state += cpufreq_get_max_state(pr->id);
+	if (pr->flags.throttling)
+		max_state += (pr->throttling.state_count -1);
+
+	return max_state;
+}
+static int
+processor_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_processor *pr = acpi_driver_data(device);
+
+	if (!device || !pr)
+		return -EINVAL;
+
+	return sprintf(buf, "%d\n", acpi_processor_max_state(pr));
+}
+
+static int
+processor_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_processor *pr = acpi_driver_data(device);
+	int cur_state;
+
+	if (!device || !pr)
+		return -EINVAL;
+
+	cur_state = cpufreq_get_cur_state(pr->id);
+	if (pr->flags.throttling)
+		cur_state += pr->throttling.state;
+
+	return sprintf(buf, "%d\n", cur_state);
+}
+
+static int
+processor_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_processor *pr = acpi_driver_data(device);
+	int result = 0;
+	int max_pstate;
+
+	if (!device || !pr)
+		return -EINVAL;
+
+	max_pstate = cpufreq_get_max_state(pr->id);
+
+	if (state > acpi_processor_max_state(pr))
+		return -EINVAL;
+
+	if (state <= max_pstate) {
+		if (pr->flags.throttling && pr->throttling.state)
+			result = acpi_processor_set_throttling(pr, 0);
+		cpufreq_set_cur_state(pr->id, state);
+	} else {
+		cpufreq_set_cur_state(pr->id, max_pstate);
+		result = acpi_processor_set_throttling(pr,
+				state - max_pstate);
+	}
+	return result;
+}
+
+struct thermal_cooling_device_ops processor_cooling_ops = {
+	.get_max_state = processor_get_max_state,
+	.get_cur_state = processor_get_cur_state,
+	.set_cur_state = processor_set_cur_state,
+};
+
 /* /proc interface */
 
 static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset)

drivers/acpi/video.c

@@ -34,6 +34,7 @@
 #include <linux/seq_file.h>
 #include <linux/input.h>
 #include <linux/backlight.h>
+#include <linux/thermal.h>
 #include <linux/video_output.h>
 #include <asm/uaccess.h>
 
@@ -179,6 +180,7 @@ struct acpi_video_device {
 	struct acpi_device *dev;
 	struct acpi_video_device_brightness *brightness;
 	struct backlight_device *backlight;
+	struct thermal_cooling_device *cdev;
 	struct output_device *output_dev;
 };
 
@@ -342,6 +344,54 @@ static struct output_properties acpi_output_properties = {
 	.set_state = acpi_video_output_set,
 	.get_status = acpi_video_output_get,
 };
+
+
+/* thermal cooling device callbacks */
+static int video_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_video_device *video = acpi_driver_data(device);
+
+	return sprintf(buf, "%d\n", video->brightness->count - 3);
+}
+
+static int video_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_video_device *video = acpi_driver_data(device);
+	unsigned long level;
+	int state;
+
+	acpi_video_device_lcd_get_level_current(video, &level);
+	for (state = 2; state < video->brightness->count; state++)
+		if (level == video->brightness->levels[state])
+			return sprintf(buf, "%d\n",
+				       video->brightness->count - state - 1);
+
+	return -EINVAL;
+}
+
+static int
+video_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_video_device *video = acpi_driver_data(device);
+	int level;
+
+	if ( state >= video->brightness->count - 2)
+		return -EINVAL;
+
+	state = video->brightness->count - state;
+	level = video->brightness->levels[state -1];
+	return acpi_video_device_lcd_set_level(video, level);
+}
+
+static struct thermal_cooling_device_ops video_cooling_ops = {
+	.get_max_state = video_get_max_state,
+	.get_cur_state = video_get_cur_state,
+	.set_cur_state = video_set_cur_state,
+};
+
 /* --------------------------------------------------------------------------
                                Video Management
    -------------------------------------------------------------------------- */
@@ -660,6 +710,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 	kfree(obj);
 
 	if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){
+		int result;
 		static int count = 0;
 		char *name;
 		name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
@@ -672,8 +723,25 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		device->backlight->props.max_brightness = device->brightness->count-3;
 		device->backlight->props.brightness = acpi_video_get_brightness(device->backlight);
 		backlight_update_status(device->backlight);
-
 		kfree(name);
+
+		device->cdev = thermal_cooling_device_register("LCD",
+					device->dev, &video_cooling_ops);
+		if (device->cdev) {
+			printk(KERN_INFO PREFIX
+				"%s is registered as cooling_device%d\n",
+				device->dev->dev.bus_id, device->cdev->id);
+			result = sysfs_create_link(&device->dev->dev.kobj,
+					  &device->cdev->device.kobj,
+					  "thermal_cooling");
+			if (result)
+				printk(KERN_ERR PREFIX "Create sysfs link\n");
+			result = sysfs_create_link(&device->cdev->device.kobj,
+					  &device->dev->dev.kobj,
+					  "device");
+                        if (result)
+				printk(KERN_ERR PREFIX "Create sysfs link\n");
+		}
 	}
 	if (device->cap._DCS && device->cap._DSS){
 		static int count = 0;
@@ -1764,6 +1832,14 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
 					    ACPI_DEVICE_NOTIFY,
 					    acpi_video_device_notify);
 	backlight_device_unregister(device->backlight);
+	if (device->cdev) {
+		sysfs_remove_link(&device->dev->dev.kobj,
+				  "thermal_cooling");
+		sysfs_remove_link(&device->cdev->device.kobj,
+				  "device");
+		thermal_cooling_device_unregister(device->cdev);
+		device->cdev = NULL;
+	}
 	video_output_unregister(device->output_dev);
 
 	return 0;

drivers/misc/Kconfig

@@ -251,4 +251,13 @@ config ATMEL_SSC
 
 	  If unsure, say N.
 
+config INTEL_MENLOW
+	tristate "Thermal Management driver for Intel menlow platform"
+	depends on ACPI_THERMAL
+	---help---
+	  ACPI thermal management enhancement driver on
+	  Intel Menlow platform.
+
+	  If unsure, say N.
+
 endif # MISC_DEVICES

drivers/misc/Makefile

@@ -17,3 +17,4 @@ obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
 obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
 obj-$(CONFIG_FUJITSU_LAPTOP)	+= fujitsu-laptop.o
 obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
+obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o

drivers/thermal/Kconfig

+#
+# Generic thermal sysfs drivers configuration
+#
+
+menuconfig THERMAL
+	bool "Generic Thermal sysfs driver"
+	default y
+	help
+	  Generic Thermal Sysfs driver offers a generic mechanism for
+	  thermal management. Usually it's made up of one or more thermal
+	  zone and cooling device.
+	  each thermal zone contains its own temperature, trip points,
+	  cooling devices.
+	  All platforms with ACPI thermal support can use this driver.
+	  If you want this support, you should say Y here

drivers/thermal/Makefile

+#
+# Makefile for sensor chip drivers.
+#
+
+obj-$(CONFIG_THERMAL)		+= thermal.o

include/acpi/acpi_bus.h

@@ -321,6 +321,8 @@ struct acpi_bus_event {
 
 extern struct kobject *acpi_kobj;
 extern int acpi_bus_generate_netlink_event(const char*, const char*, u8, int);
+void acpi_bus_private_data_handler(acpi_handle, u32, void *);
+int acpi_bus_get_private_data(acpi_handle, void **);
 /*
  * External Functions
  */

include/acpi/processor.h

@@ -4,7 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/cpu.h>
 #include <linux/cpuidle.h>
-
+#include <linux/thermal.h>
 #include <asm/acpi.h>
 
 #define ACPI_PROCESSOR_BUSY_METRIC	10
@@ -219,7 +219,7 @@ struct acpi_processor {
 	struct acpi_processor_performance *performance;
 	struct acpi_processor_throttling throttling;
 	struct acpi_processor_limit limit;
-
+	struct thermal_cooling_device *cdev;
 	/* the _PDC objects for this processor, if any */
 	struct acpi_object_list *pdc;
 };
@@ -331,7 +331,7 @@ extern struct cpuidle_driver acpi_idle_driver;
 /* in processor_thermal.c */
 int acpi_processor_get_limit_info(struct acpi_processor *pr);
 extern struct file_operations acpi_processor_limit_fops;
-
+extern struct thermal_cooling_device_ops processor_cooling_ops;
 #ifdef CONFIG_CPU_FREQ
 void acpi_thermal_cpufreq_init(void);
 void acpi_thermal_cpufreq_exit(void);

include/linux/thermal.h

+/*
+ *  thermal.h  ($Revision: 0 $)
+ *
+ *  Copyright (C) 2008  Intel Corp
+ *  Copyright (C) 2008  Zhang Rui <rui.zhang@intel.com>
+ *  Copyright (C) 2008  Sujith Thomas <sujith.thomas@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __THERMAL_H__
+#define __THERMAL_H__
+
+#include <linux/idr.h>
+#include <linux/device.h>
+
+struct thermal_zone_device;
+struct thermal_cooling_device;
+
+struct thermal_zone_device_ops {
+	int (*bind) (struct thermal_zone_device *,
+		     struct thermal_cooling_device *);
+	int (*unbind) (struct thermal_zone_device *,
+		       struct thermal_cooling_device *);
+	int (*get_temp) (struct thermal_zone_device *, char *);
+	int (*get_mode) (struct thermal_zone_device *, char *);
+	int (*set_mode) (struct thermal_zone_device *, const char *);
+	int (*get_trip_type) (struct thermal_zone_device *, int, char *);
+	int (*get_trip_temp) (struct thermal_zone_device *, int, char *);
+};
+
+struct thermal_cooling_device_ops {
+	int (*get_max_state) (struct thermal_cooling_device *, char *);
+	int (*get_cur_state) (struct thermal_cooling_device *, char *);
+	int (*set_cur_state) (struct thermal_cooling_device *, unsigned int);
+};
+
+#define THERMAL_TRIPS_NONE -1
+#define THERMAL_MAX_TRIPS 10
+#define THERMAL_NAME_LENGTH 20
+struct thermal_cooling_device {
+	int id;
+	char type[THERMAL_NAME_LENGTH];
+	struct device device;
+	void *devdata;
+	struct thermal_cooling_device_ops *ops;
+	struct list_head node;
+};
+
+#define KELVIN_TO_CELSIUS(t)	(long)(((long)t-2732 >= 0) ?	\
+				((long)t-2732+5)/10 : ((long)t-2732-5)/10)
+#define CELSIUS_TO_KELVIN(t)	((t)*10+2732)
+
+struct thermal_zone_device {
+	int id;
+	char type[THERMAL_NAME_LENGTH];
+	struct device device;
+	void *devdata;
+	int trips;
+	struct thermal_zone_device_ops *ops;
+	struct list_head cooling_devices;
+	struct idr idr;
+	struct mutex lock;	/* protect cooling devices list */
+	struct list_head node;
+};
+
+struct thermal_zone_device *thermal_zone_device_register(char *, int, void *,
+					struct thermal_zone_device_ops *);
+void thermal_zone_device_unregister(struct thermal_zone_device *);
+
+int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
+				     struct thermal_cooling_device *);
+int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
+				       struct thermal_cooling_device *);
+
+struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
+					struct thermal_cooling_device_ops *);
+void thermal_cooling_device_unregister(struct thermal_cooling_device *);
+
+#endif				/* __THERMAL_H__ */