Merge branches 'release' and 'menlo' into release

Conflicts:

	drivers/acpi/video.c
Signed-off-by: Len Brown <len.brown@intel.com>

Documentation/thermal/sysfs-api.txt

+Generic Thermal Sysfs driver How To
+=========================
+
+Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
+
+Updated: 2 January 2008
+
+Copyright (c)  2008 Intel Corporation
+
+
+0. Introduction
+
+The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
+and thermal cooling devices (fan, processor...) to register with the thermal management
+solution and to be a part of it.
+
+This how-to focusses on enabling new thermal zone and cooling devices to participate
+in thermal management.
+This solution is platform independent and any type of thermal zone devices and
+cooling devices should be able to make use of the infrastructure.
+
+The main task of the thermal sysfs driver is to expose thermal zone attributes as well
+as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on inputs
+from thermal zone attributes (the current temperature and trip point temperature)
+and throttle appropriate devices.
+
+[0-*]	denotes any positive number starting from 0
+[1-*]	denotes any positive number starting from 1
+
+1. thermal sysfs driver interface functions
+
+1.1 thermal zone device interface
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
+				void *devdata, struct thermal_zone_device_ops *ops)
+
+	This interface function adds a new thermal zone device (sensor) to
+	/sys/class/thermal folder as thermal_zone[0-*].
+	It tries to bind all the thermal cooling devices registered at the same time.
+
+	name: the thermal zone name.
+	trips: the total number of trip points this thermal zone supports.
+	devdata: device private data
+	ops: thermal zone device callbacks.
+		.bind: bind the thermal zone device with a thermal cooling device.
+		.unbind: unbing the thermal zone device with a thermal cooling device.
+		.get_temp: get the current temperature of the thermal zone.
+		.get_mode: get the current mode (user/kernel) of the thermal zone.
+			   "kernel" means thermal management is done in kernel.
+			   "user" will prevent kernel thermal driver actions upon trip points
+			   so that user applications can take charge of thermal management.
+		.set_mode: set the mode (user/kernel) of the thermal zone.
+		.get_trip_type: get the type of certain trip point.
+		.get_trip_temp: get the temperature above which the certain trip point
+				will be fired.
+
+1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
+
+	This interface function removes the thermal zone device.
+	It deletes the corresponding entry form /sys/class/thermal folder and unbind all
+	the thermal cooling devices it uses.
+
+1.2 thermal cooling device interface
+1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
+					void *devdata, struct thermal_cooling_device_ops *)
+
+	This interface function adds a new thermal cooling device (fan/processor/...) to
+	/sys/class/thermal/ folder as cooling_device[0-*].
+	It tries to bind itself to all the thermal zone devices register at the same time.
+	name: the cooling device name.
+	devdata: device private data.
+	ops: thermal cooling devices callbacks.
+		.get_max_state: get the Maximum throttle state of the cooling device.
+		.get_cur_state: get the Current throttle state of the cooling device.
+		.set_cur_state: set the Current throttle state of the cooling device.
+
+1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
+
+	This interface function remove the thermal cooling device.
+	It deletes the corresponding entry form /sys/class/thermal folder and unbind
+	itself from all	the thermal zone devices using it.
+
+1.3 interface for binding a thermal zone device with a thermal cooling device
+1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
+			int trip, struct thermal_cooling_device *cdev);
+
+	This interface function bind a thermal cooling device to the certain trip point
+	of a thermal zone device.
+	This function is usually called in the thermal zone device .bind callback.
+	tz: the thermal zone device
+	cdev: thermal cooling device
+	trip: indicates which trip point the cooling devices is associated with
+		 in this thermal zone.
+
+1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
+				int trip, struct thermal_cooling_device *cdev);
+
+	This interface function unbind a thermal cooling device from the certain trip point
+	of a thermal zone device.
+	This function is usually called in the thermal zone device .unbind callback.
+	tz: the thermal zone device
+	cdev: thermal cooling device
+	trip: indicates which trip point the cooling devices is associated with
+		in this thermal zone.
+
+2. sysfs attributes structure
+
+RO	read only value
+RW	read/write value
+
+All thermal sysfs attributes will be represented under /sys/class/thermal
+/sys/class/thermal/
+
+Thermal zone device sys I/F, created once it's registered:
+|thermal_zone[0-*]:
+	|-----type:			Type of the thermal zone
+	|-----temp:			Current temperature
+	|-----mode:			Working mode of the thermal zone
+	|-----trip_point_[0-*]_temp:	Trip point temperature
+	|-----trip_point_[0-*]_type:	Trip point type
+
+Thermal cooling device sys I/F, created once it's registered:
+|cooling_device[0-*]:
+	|-----type :			Type of the cooling device(processor/fan/...)
+	|-----max_state:		Maximum cooling state of the cooling device
+	|-----cur_state:		Current cooling state of the cooling device
+
+
+These two dynamic attributes are created/removed in pairs.
+They represent the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful exection.
+
+|thermal_zone[0-*]
+	|-----cdev[0-*]:		The [0-*]th cooling device in the current thermal zone
+	|-----cdev[0-*]_trip_point:	Trip point that cdev[0-*] is associated with
+
+
+***************************
+* Thermal zone attributes *
+***************************
+
+type				Strings which represent the thermal zone type.
+				This is given by thermal zone driver as part of registration.
+				Eg: "ACPI thermal zone" indicates it's a ACPI thermal device
+				RO
+				Optional
+
+temp				Current temperature as reported by thermal zone (sensor)
+				Unit: degree celsius
+				RO
+				Required
+
+mode				One of the predifned values in [kernel, user]
+				This file gives information about the algorithm
+				that is currently managing the thermal zone.
+				It can be either default kernel based algorithm
+				or user space application.
+				RW
+				Optional
+				kernel	= Thermal management in kernel thermal zone driver.
+				user	= Preventing kernel thermal zone driver actions upon
+					  trip points so that user application can take full
+					  charge of the thermal management.
+
+trip_point_[0-*]_temp		The temperature above which trip point will be fired
+				Unit: degree celsius
+				RO
+				Optional
+
+trip_point_[0-*]_type 		Strings which indicate the type of the trip point
+				Eg. it can be one of critical, hot, passive,
+				    active[0-*] for ACPI thermal zone.
+				RO
+				Optional
+
+cdev[0-*]			Sysfs link to the thermal cooling device node where the sys I/F
+				for cooling device throttling control represents.
+				RO
+				Optional
+
+cdev[0-*]_trip_point		The trip point with which cdev[0-*] is assocated in this thermal zone
+				-1 means the cooling device is not associated with any trip point.
+				RO
+				Optional
+
+******************************
+* Cooling device  attributes *
+******************************
+
+type				String which represents the type of device
+				eg: For generic ACPI: this should be "Fan",
+				"Processor" or "LCD"
+				eg. For memory controller device on intel_menlow platform:
+				this should be "Memory controller"
+				RO
+				Optional
+
+max_state			The maximum permissible cooling state of this cooling device.
+				RO
+				Required
+
+cur_state			The current cooling state of this cooling device.
+				the value can any integer numbers between 0 and max_state,
+				cur_state == 0 means no cooling
+				cur_state == max_state means the maximum cooling.
+				RW
+				Required
+
+3. A simple implementation
+
+ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
+If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
+it may register itself as a thermale_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as thermal_cooling_device.
+If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
+the sys I/F structure will be built like this:
+
+/sys/class/thermal:
+
+|thermal_zone1:
+	|-----type:			ACPI thermal zone
+	|-----temp:			37
+	|-----mode:			kernel
+	|-----trip_point_0_temp:	100
+	|-----trip_point_0_type:	critical
+	|-----trip_point_1_temp:	80
+	|-----trip_point_1_type:	passive
+	|-----trip_point_2_temp:	70
+	|-----trip_point_2_type:	active[0]
+	|-----trip_point_3_temp:	60
+	|-----trip_point_3_type:	active[1]
+	|-----cdev0:			--->/sys/class/thermal/cooling_device0
+	|-----cdev0_trip_point:		1	/* cdev0 can be used for passive */
+	|-----cdev1:			--->/sys/class/thermal/cooling_device3
+	|-----cdev1_trip_point:		2	/* cdev1 can be used for active[0]*/
+
+|cooling_device0:
+	|-----type:			Processor
+	|-----max_state:		8
+	|-----cur_state:		0
+
+|cooling_device3:
+	|-----type:			Fan
+	|-----max_state:		2
+	|-----cur_state:		0

drivers/Kconfig

@@ -60,6 +60,8 @@ source "drivers/power/Kconfig"
 
 source "drivers/hwmon/Kconfig"
 
+source "drivers/thermal/Kconfig"
+
 source "drivers/watchdog/Kconfig"
 
 source "drivers/ssb/Kconfig"

drivers/Makefile

@@ -65,6 +65,7 @@ obj-y				+= i2c/
 obj-$(CONFIG_W1)		+= w1/
 obj-$(CONFIG_POWER_SUPPLY)	+= power/
 obj-$(CONFIG_HWMON)		+= hwmon/
+obj-$(CONFIG_THERMAL)		+= thermal/
 obj-$(CONFIG_WATCHDOG)		+= watchdog/
 obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_MD)		+= md/

drivers/acpi/Kconfig

@@ -186,6 +186,7 @@ config ACPI_HOTPLUG_CPU
 config ACPI_THERMAL
 	tristate "Thermal Zone"
 	depends on ACPI_PROCESSOR
+	select THERMAL
 	default y
 	help
 	  This driver adds support for ACPI thermal zones.  Most mobile and

drivers/acpi/bus.c

@@ -122,6 +122,31 @@ int acpi_bus_get_status(struct acpi_device *device)
 
 EXPORT_SYMBOL(acpi_bus_get_status);
 
+void acpi_bus_private_data_handler(acpi_handle handle,
+				   u32 function, void *context)
+{
+	return;
+}
+EXPORT_SYMBOL(acpi_bus_private_data_handler);
+
+int acpi_bus_get_private_data(acpi_handle handle, void **data)
+{
+	acpi_status status = AE_OK;
+
+	if (!*data)
+		return -EINVAL;
+
+	status = acpi_get_data(handle, acpi_bus_private_data_handler, data);
+	if (ACPI_FAILURE(status) || !*data) {
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n",
+				handle));
+		return -ENODEV;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(acpi_bus_get_private_data);
+
 /* --------------------------------------------------------------------------
                                  Power Management
    -------------------------------------------------------------------------- */

drivers/acpi/fan.c

@@ -30,7 +30,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
-
+#include <linux/thermal.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -68,9 +68,55 @@ static struct acpi_driver acpi_fan_driver = {
 		},
 };
 
+/* thermal cooling device callbacks */
+static int fan_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	/* ACPI fan device only support two states: ON/OFF */
+	return sprintf(buf, "1\n");
+}
+
+static int fan_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	int state;
+	int result;
+
+	if (!device)
+		return -EINVAL;
+
+	result = acpi_bus_get_power(device->handle, &state);
+	if (result)
+		return result;
+
+	return sprintf(buf, "%s\n", state == ACPI_STATE_D3 ? "0" :
+			 (state == ACPI_STATE_D0 ? "1" : "unknown"));
+}
+
+static int
+fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+{
+	struct acpi_device *device = cdev->devdata;
+	int result;
+
+	if (!device || (state != 0 && state != 1))
+		return -EINVAL;
+
+	result = acpi_bus_set_power(device->handle,
+				state ? ACPI_STATE_D0 : ACPI_STATE_D3);
+
+	return result;
+}
+
+static struct thermal_cooling_device_ops fan_cooling_ops = {
+	.get_max_state = fan_get_max_state,
+	.get_cur_state = fan_get_cur_state,
+	.set_cur_state = fan_set_cur_state,
+};
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_PROCFS
 
 static struct proc_dir_entry *acpi_fan_dir;
 
@@ -171,7 +217,17 @@ static int acpi_fan_remove_fs(struct acpi_device *device)
 
 	return 0;
 }
+#else
+static int acpi_fan_add_fs(struct acpi_device *device)
+{
+	return 0;
+}
 
+static int acpi_fan_remove_fs(struct acpi_device *device)
+{
+	return 0;
+}
+#endif
 /* --------------------------------------------------------------------------
                                  Driver Interface
    -------------------------------------------------------------------------- */
@@ -179,9 +235,8 @@ static int acpi_fan_remove_fs(struct acpi_device *device)
 static int acpi_fan_add(struct acpi_device *device)
 {
 	int result = 0;
-	struct acpi_fan *fan = NULL;
 	int state = 0;
-
+	struct thermal_cooling_device *cdev;
 
 	if (!device)
 		return -EINVAL;
@@ -199,6 +254,25 @@ static int acpi_fan_add(struct acpi_device *device)
 	acpi_bus_set_power(device->handle, state);
 	device->flags.force_power_state = 0;
 
+	cdev = thermal_cooling_device_register("Fan", device,
+						&fan_cooling_ops);
+	if (cdev)
+		printk(KERN_INFO PREFIX
+			"%s is registered as cooling_device%d\n",
+			device->dev.bus_id, cdev->id);
+	else
+		goto end;
+	acpi_driver_data(device) = cdev;
+	result = sysfs_create_link(&device->dev.kobj, &cdev->device.kobj,
+					"thermal_cooling");
+	if (result)
+		return result;
+
+	result = sysfs_create_link(&cdev->device.kobj, &device->dev.kobj,
+                                       "device");
+        if (result)
+                return result;
+
 	result = acpi_fan_add_fs(device);
 	if (result)
 		goto end;
@@ -208,18 +282,20 @@ static int acpi_fan_add(struct acpi_device *device)
 	       !device->power.state ? "on" : "off");
 
       end:
-	if (result)
-		kfree(fan);
-
 	return result;
 }
 
 static int acpi_fan_remove(struct acpi_device *device, int type)
 {
-	if (!device || !acpi_driver_data(device))
+	struct thermal_cooling_device *cdev = acpi_driver_data(device);
+
+	if (!device || !cdev)
 		return -EINVAL;
 
 	acpi_fan_remove_fs(device);
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+	sysfs_remove_link(&cdev->device.kobj, "device");
+	thermal_cooling_device_unregister(cdev);
 
 	return 0;
 }
@@ -261,10 +337,12 @@ static int __init acpi_fan_init(void)
 	int result = 0;
 
 
+#ifdef CONFIG_ACPI_PROCFS
 	acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir);
 	if (!acpi_fan_dir)
 		return -ENODEV;
 	acpi_fan_dir->owner = THIS_MODULE;
+#endif
 
 	result = acpi_bus_register_driver(&acpi_fan_driver);
 	if (result < 0) {

drivers/acpi/processor_core.c

@@ -668,6 +668,24 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
 
 	acpi_processor_power_init(pr, device);
 
+	pr->cdev = thermal_cooling_device_register("Processor", device,
+						&processor_cooling_ops);
+	if (pr->cdev)
+		printk(KERN_INFO PREFIX
+			"%s is registered as cooling_device%d\n",
+			device->dev.bus_id, pr->cdev->id);
+	else
+		goto end;
+
+	result = sysfs_create_link(&device->dev.kobj, &pr->cdev->device.kobj,
+					"thermal_cooling");
+	if (result)
+		return result;
+	result = sysfs_create_link(&pr->cdev->device.kobj, &device->dev.kobj,
+					"device");
+	if (result)
+		return result;
+
 	if (pr->flags.throttling) {
 		printk(KERN_INFO PREFIX "%s [%s] (supports",
 		       acpi_device_name(device), acpi_device_bid(device));
@@ -791,6 +809,11 @@ static int acpi_processor_remove(struct acpi_device *device, int type)
 
 	acpi_processor_remove_fs(device);
 
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+	sysfs_remove_link(&pr->cdev->device.kobj, "device");
+	thermal_cooling_device_unregister(pr->cdev);
+	pr->cdev = NULL;
+
 	processors[pr->id] = NULL;
 
 	kfree(pr);

drivers/acpi/processor_thermal.c

@@ -32,6 +32,7 @@
 #include <linux/cpufreq.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/sysdev.h>
 
 #include <asm/uaccess.h>
 
@@ -93,6 +94,9 @@ static int acpi_processor_apply_limit(struct acpi_processor *pr)
  * _any_ cpufreq driver and not only the acpi-cpufreq driver.
  */
 
+#define CPUFREQ_THERMAL_MIN_STEP 0
+#define CPUFREQ_THERMAL_MAX_STEP 3
+
 static unsigned int cpufreq_thermal_reduction_pctg[NR_CPUS];
 static unsigned int acpi_thermal_cpufreq_is_init = 0;
 
@@ -109,8 +113,9 @@ static int acpi_thermal_cpufreq_increase(unsigned int cpu)
 	if (!cpu_has_cpufreq(cpu))
 		return -ENODEV;
 
-	if (cpufreq_thermal_reduction_pctg[cpu] < 60) {
-		cpufreq_thermal_reduction_pctg[cpu] += 20;
+	if (cpufreq_thermal_reduction_pctg[cpu] <
+		CPUFREQ_THERMAL_MAX_STEP) {
+		cpufreq_thermal_reduction_pctg[cpu]++;
 		cpufreq_update_policy(cpu);
 		return 0;
 	}
@@ -123,8 +128,9 @@ static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
 	if (!cpu_has_cpufreq(cpu))
 		return -ENODEV;
 
-	if (cpufreq_thermal_reduction_pctg[cpu] > 20)
-		cpufreq_thermal_reduction_pctg[cpu] -= 20;
+	if (cpufreq_thermal_reduction_pctg[cpu] >
+		(CPUFREQ_THERMAL_MIN_STEP + 1))
+		cpufreq_thermal_reduction_pctg[cpu]--;
 	else
 		cpufreq_thermal_reduction_pctg[cpu] = 0;
 	cpufreq_update_policy(cpu);
@@ -143,7 +149,7 @@ static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb,
 
 	max_freq =
 	    (policy->cpuinfo.max_freq *
-	     (100 - cpufreq_thermal_reduction_pctg[policy->cpu])) / 100;
+	     (100 - cpufreq_thermal_reduction_pctg[policy->cpu] * 20)) / 100;
 
 	cpufreq_verify_within_limits(policy, 0, max_freq);
 
@@ -155,6 +161,32 @@ static struct notifier_block acpi_thermal_cpufreq_notifier_block = {
 	.notifier_call = acpi_thermal_cpufreq_notifier,
 };
 
+static int cpufreq_get_max_state(unsigned int cpu)
+{
+	if (!cpu_has_cpufreq(cpu))
+		return 0;
+
+	return CPUFREQ_THERMAL_MAX_STEP;
+}
+
+static int cpufreq_get_cur_state(unsigned int cpu)
+{
+	if (!cpu_has_cpufreq(cpu))
+		return 0;
+
+	return cpufreq_thermal_reduction_pctg[cpu];
+}
+
+static int cpufreq_set_cur_state(unsigned int cpu, int state)
+{
+	if (!cpu_has_cpufreq(cpu))
+		return 0;
+
+	cpufreq_thermal_reduction_pctg[cpu] = state;
+	cpufreq_update_policy(cpu);
+	return 0;
+}
+
 void acpi_thermal_cpufreq_init(void)
 {
 	int i;
@@ -179,6 +211,20 @@ void acpi_thermal_cpufreq_exit(void)
 }
 
 #else				/* ! CONFIG_CPU_FREQ */
+static int cpufreq_get_max_state(unsigned int cpu)
+{
+	return 0;
+}
+
+static int cpufreq_get_cur_state(unsigned int cpu)
+{
+	return 0;
+}
+
+static int cpufreq_set_cur_state(unsigned int cpu, int state)
+{
+	return 0;
+}
 
 static int acpi_thermal_cpufreq_increase(unsigned int cpu)
 {
@@ -310,6 +356,84 @@ int acpi_processor_get_limit_info(struct acpi_processor *pr)
 	return 0;
 }
 
+/* thermal coolign device callbacks */
+static int acpi_processor_max_state(struct acpi_processor *pr)
+{
+	int max_state = 0;
+
+	/*
+	 * There exists four states according to
+	 * cpufreq_thermal_reduction_ptg. 0, 1, 2, 3
+	 */
+	max_state += cpufreq_get_max_state(pr->id);
+	if (pr->flags.throttling)
+		max_state += (pr->throttling.state_count -1);
+
+	return max_state;
+}
+static int
+processor_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_processor *pr = acpi_driver_data(device);
+
+	if (!device || !pr)
+		return -EINVAL;
+
+	return sprintf(buf, "%d\n", acpi_processor_max_state(pr));
+}
+
+static int
+processor_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_processor *pr = acpi_driver_data(device);
+	int cur_state;
+
+	if (!device || !pr)
+		return -EINVAL;
+
+	cur_state = cpufreq_get_cur_state(pr->id);
+	if (pr->flags.throttling)
+		cur_state += pr->throttling.state;
+
+	return sprintf(buf, "%d\n", cur_state);
+}
+
+static int
+processor_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_processor *pr = acpi_driver_data(device);
+	int result = 0;
+	int max_pstate;
+
+	if (!device || !pr)
+		return -EINVAL;
+
+	max_pstate = cpufreq_get_max_state(pr->id);
+
+	if (state > acpi_processor_max_state(pr))
+		return -EINVAL;
+
+	if (state <= max_pstate) {
+		if (pr->flags.throttling && pr->throttling.state)
+			result = acpi_processor_set_throttling(pr, 0);
+		cpufreq_set_cur_state(pr->id, state);
+	} else {
+		cpufreq_set_cur_state(pr->id, max_pstate);
+		result = acpi_processor_set_throttling(pr,
+				state - max_pstate);
+	}
+	return result;
+}
+
+struct thermal_cooling_device_ops processor_cooling_ops = {
+	.get_max_state = processor_get_max_state,
+	.get_cur_state = processor_get_cur_state,
+	.set_cur_state = processor_set_cur_state,
+};
+
 /* /proc interface */
 
 static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset)

drivers/acpi/thermal.c

@@ -43,7 +43,7 @@
 #include <linux/seq_file.h>
 #include <linux/reboot.h>
 #include <asm/uaccess.h>
-
+#include <linux/thermal.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -65,9 +65,6 @@
 #define ACPI_THERMAL_MAX_ACTIVE	10
 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
 
-#define KELVIN_TO_CELSIUS(t)    (long)(((long)t-2732>=0) ? ((long)t-2732+5)/10 : ((long)t-2732-5)/10)
-#define CELSIUS_TO_KELVIN(t)	((t+273)*10)
-
 #define _COMPONENT		ACPI_THERMAL_COMPONENT
 ACPI_MODULE_NAME("thermal");
 
@@ -195,6 +192,8 @@ struct acpi_thermal {
 	struct acpi_thermal_trips trips;
 	struct acpi_handle_list devices;
 	struct timer_list timer;
+	struct thermal_zone_device *thermal_zone;
+	int tz_enabled;
 	struct mutex lock;
 };
 
@@ -321,22 +320,49 @@ static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode)
 	return 0;
 }
 
-static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
-{
-	acpi_status status = AE_OK;
-	int i = 0;
+#define ACPI_TRIPS_CRITICAL	0x01
+#define ACPI_TRIPS_HOT		0x02
+#define ACPI_TRIPS_PASSIVE	0x04
+#define ACPI_TRIPS_ACTIVE	0x08
+#define ACPI_TRIPS_DEVICES	0x10
 
+#define ACPI_TRIPS_REFRESH_THRESHOLDS	(ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
+#define ACPI_TRIPS_REFRESH_DEVICES	ACPI_TRIPS_DEVICES
 
-	if (!tz)
-		return -EINVAL;
+#define ACPI_TRIPS_INIT      (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT |	\
+			      ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE |	\
+			      ACPI_TRIPS_DEVICES)
 
-	/* Critical Shutdown (required) */
+/*
+ * This exception is thrown out in two cases:
+ * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
+ *   when re-evaluating the AML code.
+ * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
+ *   We need to re-bind the cooling devices of a thermal zone when this occurs.
+ */
+#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str)	\
+do {	\
+	if (flags != ACPI_TRIPS_INIT)	\
+		ACPI_EXCEPTION((AE_INFO, AE_ERROR,	\
+		"ACPI thermal trip point %s changed\n"	\
+		"Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \
+} while (0)
+
+static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
+{
+	acpi_status status = AE_OK;
+	struct acpi_handle_list devices;
+	int valid = 0;
+	int i;
 
-	status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL,
-				       &tz->trips.critical.temperature);
+	/* Critical Shutdown (required) */
+	if (flag & ACPI_TRIPS_CRITICAL) {
+		status = acpi_evaluate_integer(tz->device->handle,
+				"_CRT", NULL, &tz->trips.critical.temperature);
 		if (ACPI_FAILURE(status)) {
 			tz->trips.critical.flags.valid = 0;
-		ACPI_EXCEPTION((AE_INFO, status, "No critical threshold"));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"No critical threshold"));
 			return -ENODEV;
 		} else {
 			tz->trips.critical.flags.valid = 1;
@@ -344,13 +370,11 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 					"Found critical threshold [%lu]\n",
 					tz->trips.critical.temperature));
 		}
-
 		if (tz->trips.critical.flags.valid == 1) {
 			if (crt == -1) {
 				tz->trips.critical.flags.valid = 0;
 			} else if (crt > 0) {
 				unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
-
 				/*
 				 * Allow override to lower critical threshold
 				 */
@@ -358,23 +382,27 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 					tz->trips.critical.temperature = crt_k;
 			}
 		}
+	}
 
 	/* Critical Sleep (optional) */
-
-	status =
-	    acpi_evaluate_integer(tz->device->handle, "_HOT", NULL,
-				  &tz->trips.hot.temperature);
+	if (flag & ACPI_TRIPS_HOT) {
+		status = acpi_evaluate_integer(tz->device->handle,
+				"_HOT", NULL, &tz->trips.hot.temperature);
 		if (ACPI_FAILURE(status)) {
 			tz->trips.hot.flags.valid = 0;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No hot threshold\n"));
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					"No hot threshold\n"));
 		} else {
 			tz->trips.hot.flags.valid = 1;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found hot threshold [%lu]\n",
-				  tz->trips.hot.temperature));
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					"Found hot threshold [%lu]\n",
+					tz->trips.critical.temperature));
+		}
 	}
 
-	/* Passive: Processors (optional) */
-
+	/* Passive (optional) */
+	if (flag & ACPI_TRIPS_PASSIVE) {
+		valid = tz->trips.passive.flags.valid;
 		if (psv == -1) {
 			status = AE_SUPPORT;
 		} else if (psv > 0) {
@@ -385,65 +413,71 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 				"_PSV", NULL, &tz->trips.passive.temperature);
 		}
 
-	if (ACPI_FAILURE(status)) {
+		if (ACPI_FAILURE(status))
 			tz->trips.passive.flags.valid = 0;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No passive threshold\n"));
-	} else {
+		else {
 			tz->trips.passive.flags.valid = 1;
-
-		status =
-		    acpi_evaluate_integer(tz->device->handle, "_TC1", NULL,
-					  &tz->trips.passive.tc1);
+			if (flag == ACPI_TRIPS_INIT) {
+				status = acpi_evaluate_integer(
+						tz->device->handle, "_TC1",
+						NULL, &tz->trips.passive.tc1);
 				if (ACPI_FAILURE(status))
 					tz->trips.passive.flags.valid = 0;
-
-		status =
-		    acpi_evaluate_integer(tz->device->handle, "_TC2", NULL,
-					  &tz->trips.passive.tc2);
+				status = acpi_evaluate_integer(
+						tz->device->handle, "_TC2",
+						NULL, &tz->trips.passive.tc2);
 				if (ACPI_FAILURE(status))
 					tz->trips.passive.flags.valid = 0;
-
-		status =
-		    acpi_evaluate_integer(tz->device->handle, "_TSP", NULL,
-					  &tz->trips.passive.tsp);
+				status = acpi_evaluate_integer(
+						tz->device->handle, "_TSP",
+						NULL, &tz->trips.passive.tsp);
 				if (ACPI_FAILURE(status))
 					tz->trips.passive.flags.valid = 0;
-
-		status =
-		    acpi_evaluate_reference(tz->device->handle, "_PSL", NULL,
-					    &tz->trips.passive.devices);
+			}
+		}
+	}
+	if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
+		memset(&devices, 0, sizeof(struct acpi_handle_list));
+		status = acpi_evaluate_reference(tz->device->handle, "_PSL",
+							NULL, &devices);
 		if (ACPI_FAILURE(status))
 			tz->trips.passive.flags.valid = 0;
-
-		if (!tz->trips.passive.flags.valid)
-			printk(KERN_WARNING PREFIX "Invalid passive threshold\n");
 		else
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "Found passive threshold [%lu]\n",
-					  tz->trips.passive.temperature));
-	}
+			tz->trips.passive.flags.valid = 1;
 
-	/* Active: Fans, etc. (optional) */
+		if (memcmp(&tz->trips.passive.devices, &devices,
+				sizeof(struct acpi_handle_list))) {
+			memcpy(&tz->trips.passive.devices, &devices,
+				sizeof(struct acpi_handle_list));
+			ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+		}
+	}
+	if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
+		if (valid != tz->trips.passive.flags.valid)
+				ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
+	}
 
+	/* Active (optional) */
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-
 		char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
+		valid = tz->trips.active[i].flags.valid;
 
 		if (act == -1)
 			break; /* disable all active trip points */
 
+		if (flag & ACPI_TRIPS_ACTIVE) {
 			status = acpi_evaluate_integer(tz->device->handle,
 				name, NULL, &tz->trips.active[i].temperature);
-
 			if (ACPI_FAILURE(status)) {
-			if (i == 0)	/* no active trip points */
+				tz->trips.active[i].flags.valid = 0;
+				if (i == 0)
 					break;
-			if (act <= 0)	/* no override requested */
+				if (act <= 0)
 					break;
-			if (i == 1) {	/* 1 trip point */
+				if (i == 1)
 					tz->trips.active[0].temperature =
 						CELSIUS_TO_KELVIN(act);
-			} else {	/* multiple trips */
+				else
 					/*
 					 * Don't allow override higher than
 					 * the next higher trip point
@@ -453,41 +487,54 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 						CELSIUS_TO_KELVIN(act) ?
 						tz->trips.active[i - 2].temperature :
 						CELSIUS_TO_KELVIN(act));
-			}
 				break;
+			} else
+				tz->trips.active[i].flags.valid = 1;
 		}
 
 		name[2] = 'L';
-		status =
-		    acpi_evaluate_reference(tz->device->handle, name, NULL,
-					    &tz->trips.active[i].devices);
-		if (ACPI_SUCCESS(status)) {
+		if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) {
+			memset(&devices, 0, sizeof(struct acpi_handle_list));
+			status = acpi_evaluate_reference(tz->device->handle,
+						name, NULL, &devices);
+			if (ACPI_FAILURE(status))
+				tz->trips.active[i].flags.valid = 0;
+			else
 				tz->trips.active[i].flags.valid = 1;
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "Found active threshold [%d]:[%lu]\n",
-					  i, tz->trips.active[i].temperature));
-		} else
-			ACPI_EXCEPTION((AE_INFO, status,
-					"Invalid active threshold [%d]", i));
+
+			if (memcmp(&tz->trips.active[i].devices, &devices,
+					sizeof(struct acpi_handle_list))) {
+				memcpy(&tz->trips.active[i].devices, &devices,
+					sizeof(struct acpi_handle_list));
+				ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+			}
+		}
+		if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
+			if (valid != tz->trips.active[i].flags.valid)
+				ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
+
+		if (!tz->trips.active[i].flags.valid)
+			break;
+	}
+
+	if (flag & ACPI_TRIPS_DEVICES) {
+		memset(&devices, 0, sizeof(struct acpi_handle_list));
+		status = acpi_evaluate_reference(tz->device->handle, "_TZD",
+						NULL, &devices);
+		if (memcmp(&tz->devices, &devices,
+				sizeof(struct acpi_handle_list))) {
+			memcpy(&tz->devices, &devices,
+				sizeof(struct acpi_handle_list));
+			ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+		}
 	}
 
 	return 0;
 }
 
-static int acpi_thermal_get_devices(struct acpi_thermal *tz)
+static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 {
-	acpi_status status = AE_OK;
-
-
-	if (!tz)
-		return -EINVAL;
-
-	status =
-	    acpi_evaluate_reference(tz->device->handle, "_TZD", NULL, &tz->devices);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	return 0;
+	return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
 }
 
 static int acpi_thermal_critical(struct acpi_thermal *tz)
@@ -735,6 +782,9 @@ static void acpi_thermal_check(void *data)
 	if (result)
 		goto unlock;
 
+	if (!tz->tz_enabled)
+		goto unlock;
+
 	memset(&tz->state, 0, sizeof(tz->state));
 
 	/*
@@ -828,6 +878,290 @@ static void acpi_thermal_check(void *data)
 	mutex_unlock(&tz->lock);
 }
 
+/* sys I/F for generic thermal sysfs support */
+static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
+{
+	struct acpi_thermal *tz = thermal->devdata;
+
+	if (!tz)
+		return -EINVAL;
+
+	return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(tz->temperature));
+}
+
+static const char enabled[] = "kernel";
+static const char disabled[] = "user";
+static int thermal_get_mode(struct thermal_zone_device *thermal,
+				char *buf)
+{
+	struct acpi_thermal *tz = thermal->devdata;
+
+	if (!tz)
+		return -EINVAL;
+
+	return sprintf(buf, "%s\n", tz->tz_enabled ?
+			enabled : disabled);
+}
+
+static int thermal_set_mode(struct thermal_zone_device *thermal,
+				const char *buf)
+{
+	struct acpi_thermal *tz = thermal->devdata;
+	int enable;
+
+	if (!tz)
+		return -EINVAL;
+
+	/*
+	 * enable/disable thermal management from ACPI thermal driver
+	 */
+	if (!strncmp(buf, enabled, sizeof enabled - 1))
+		enable = 1;
+	else if (!strncmp(buf, disabled, sizeof disabled - 1))
+		enable = 0;
+	else
+		return -EINVAL;
+
+	if (enable != tz->tz_enabled) {
+		tz->tz_enabled = enable;
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			"%s ACPI thermal control\n",
+			tz->tz_enabled ? enabled : disabled));
+		acpi_thermal_check(tz);
+	}
+	return 0;
+}
+
+static int thermal_get_trip_type(struct thermal_zone_device *thermal,
+				 int trip, char *buf)
+{
+	struct acpi_thermal *tz = thermal->devdata;
+	int i;
+
+	if (!tz || trip < 0)
+		return -EINVAL;
+
+	if (tz->trips.critical.flags.valid) {
+		if (!trip)
+			return sprintf(buf, "critical\n");
+		trip--;
+	}
+
+	if (tz->trips.hot.flags.valid) {
+		if (!trip)
+			return sprintf(buf, "hot\n");
+		trip--;
+	}
+
+	if (tz->trips.passive.flags.valid) {
+		if (!trip)
+			return sprintf(buf, "passive\n");
+		trip--;
+	}
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
+		tz->trips.active[i].flags.valid; i++) {
+		if (!trip)
+			return sprintf(buf, "active%d\n", i);
+		trip--;
+	}
+
+	return -EINVAL;
+}
+
+static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
+				 int trip, char *buf)
+{
+	struct acpi_thermal *tz = thermal->devdata;
+	int i;
+
+	if (!tz || trip < 0)
+		return -EINVAL;
+
+	if (tz->trips.critical.flags.valid) {
+		if (!trip)
+			return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+				tz->trips.critical.temperature));
+		trip--;
+	}
+
+	if (tz->trips.hot.flags.valid) {
+		if (!trip)
+			return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+					tz->trips.hot.temperature));
+		trip--;
+	}
+
+	if (tz->trips.passive.flags.valid) {
+		if (!trip)
+			return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+					tz->trips.passive.temperature));
+		trip--;
+	}
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
+		tz->trips.active[i].flags.valid; i++) {
+		if (!trip)
+			return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+					tz->trips.active[i].temperature));
+		trip--;
+	}
+
+	return -EINVAL;
+}
+
+typedef int (*cb)(struct thermal_zone_device *, int,
+		  struct thermal_cooling_device *);
+static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
+					struct thermal_cooling_device *cdev,
+					cb action)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_thermal *tz = thermal->devdata;
+	struct acpi_device *dev;
+	acpi_status status;
+	acpi_handle handle;
+	int i;
+	int j;
+	int trip = -1;
+	int result = 0;
+
+	if (tz->trips.critical.flags.valid)
+		trip++;
+
+	if (tz->trips.hot.flags.valid)
+		trip++;
+
+	if (tz->trips.passive.flags.valid) {
+		trip++;
+		for (i = 0; i < tz->trips.passive.devices.count;
+		    i++) {
+			handle = tz->trips.passive.devices.handles[i];
+			status = acpi_bus_get_device(handle, &dev);
+			if (ACPI_SUCCESS(status) && (dev == device)) {
+				result = action(thermal, trip, cdev);
+				if (result)
+					goto failed;
+			}
+		}
+	}
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		if (!tz->trips.active[i].flags.valid)
+			break;
+		trip++;
+		for (j = 0;
+		    j < tz->trips.active[i].devices.count;
+		    j++) {
+			handle = tz->trips.active[i].devices.handles[j];
+			status = acpi_bus_get_device(handle, &dev);
+			if (ACPI_SUCCESS(status) && (dev == device)) {
+				result = action(thermal, trip, cdev);
+				if (result)
+					goto failed;
+			}
+		}
+	}
+
+	for (i = 0; i < tz->devices.count; i++) {
+		handle = tz->devices.handles[i];
+		status = acpi_bus_get_device(handle, &dev);
+		if (ACPI_SUCCESS(status) && (dev == device)) {
+			result = action(thermal, -1, cdev);
+			if (result)
+				goto failed;
+		}
+	}
+
+failed:
+	return result;
+}
+
+static int
+acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
+					struct thermal_cooling_device *cdev)
+{
+	return acpi_thermal_cooling_device_cb(thermal, cdev,
+				thermal_zone_bind_cooling_device);
+}
+
+static int
+acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
+					struct thermal_cooling_device *cdev)
+{
+	return acpi_thermal_cooling_device_cb(thermal, cdev,
+				thermal_zone_unbind_cooling_device);
+}
+
+static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
+	.bind = acpi_thermal_bind_cooling_device,
+	.unbind	= acpi_thermal_unbind_cooling_device,
+	.get_temp = thermal_get_temp,
+	.get_mode = thermal_get_mode,
+	.set_mode = thermal_set_mode,
+	.get_trip_type = thermal_get_trip_type,
+	.get_trip_temp = thermal_get_trip_temp,
+};
+
+static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
+{
+	int trips = 0;
+	int result;
+	acpi_status status;
+	int i;
+
+	if (tz->trips.critical.flags.valid)
+		trips++;
+
+	if (tz->trips.hot.flags.valid)
+		trips++;
+
+	if (tz->trips.passive.flags.valid)
+		trips++;
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
+			tz->trips.active[i].flags.valid; i++, trips++);
+	tz->thermal_zone = thermal_zone_device_register("ACPI thermal zone",
+					trips, tz, &acpi_thermal_zone_ops);
+	if (!tz->thermal_zone)
+		return -ENODEV;
+
+	result = sysfs_create_link(&tz->device->dev.kobj,
+				   &tz->thermal_zone->device.kobj, "thermal_zone");
+	if (result)
+		return result;
+
+	result = sysfs_create_link(&tz->thermal_zone->device.kobj,
+				   &tz->device->dev.kobj, "device");
+	if (result)
+		return result;
+
+	status = acpi_attach_data(tz->device->handle,
+				  acpi_bus_private_data_handler,
+				  tz->thermal_zone);
+	if (ACPI_FAILURE(status)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				"Error attaching device data\n"));
+		return -ENODEV;
+	}
+
+	tz->tz_enabled = 1;
+
+	printk(KERN_INFO PREFIX "%s is registered as thermal_zone%d\n",
+			tz->device->dev.bus_id, tz->thermal_zone->id);
+	return 0;
+}
+
+static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)
+{
+	sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
+	sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
+	thermal_zone_device_unregister(tz->thermal_zone);
+	tz->thermal_zone = NULL;
+	acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler);
+}
+
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -1184,15 +1518,15 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
 		acpi_thermal_check(tz);
 		break;
 	case ACPI_THERMAL_NOTIFY_THRESHOLDS:
-		acpi_thermal_get_trip_points(tz);
+		acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
 		acpi_thermal_check(tz);
 		acpi_bus_generate_proc_event(device, event, 0);
 		acpi_bus_generate_netlink_event(device->pnp.device_class,
 						  device->dev.bus_id, event, 0);
 		break;
 	case ACPI_THERMAL_NOTIFY_DEVICES:
-		if (tz->flags.devices)
-			acpi_thermal_get_devices(tz);
+		acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
+		acpi_thermal_check(tz);
 		acpi_bus_generate_proc_event(device, event, 0);
 		acpi_bus_generate_netlink_event(device->pnp.device_class,
 						  device->dev.bus_id, event, 0);
@@ -1235,11 +1569,6 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz)
 	else
 		acpi_thermal_get_polling_frequency(tz);
 
-	/* Get devices in this thermal zone [_TZD] (optional) */
-	result = acpi_thermal_get_devices(tz);
-	if (!result)
-		tz->flags.devices = 1;
-
 	return 0;
 }
 
@@ -1263,13 +1592,19 @@ static int acpi_thermal_add(struct acpi_device *device)
 	strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
 	acpi_driver_data(device) = tz;
 	mutex_init(&tz->lock);
+
+
 	result = acpi_thermal_get_info(tz);
 	if (result)
-		goto end;
+		goto free_memory;
+
+	result = acpi_thermal_register_thermal_zone(tz);
+	if (result)
+		goto free_memory;
 
 	result = acpi_thermal_add_fs(device);
 	if (result)
-		goto end;
+		goto unregister_thermal_zone;
 
 	init_timer(&tz->timer);
 
@@ -1280,19 +1615,21 @@ static int acpi_thermal_add(struct acpi_device *device)
 					     acpi_thermal_notify, tz);
 	if (ACPI_FAILURE(status)) {
 		result = -ENODEV;
-		goto end;
+		goto remove_fs;
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
 	       acpi_device_name(device), acpi_device_bid(device),
 	       KELVIN_TO_CELSIUS(tz->temperature));
+	goto end;
 
-      end:
-	if (result) {
+remove_fs:
 	acpi_thermal_remove_fs(device);
+unregister_thermal_zone:
+	thermal_zone_device_unregister(tz->thermal_zone);
+free_memory:
 	kfree(tz);
-	}
-
+end:
 	return result;
 }
 
@@ -1332,6 +1669,7 @@ static int acpi_thermal_remove(struct acpi_device *device, int type)
 	}
 
 	acpi_thermal_remove_fs(device);
+	acpi_thermal_unregister_thermal_zone(tz);
 	mutex_destroy(&tz->lock);
 	kfree(tz);
 	return 0;

drivers/acpi/video.c

@@ -34,6 +34,7 @@
 #include <linux/seq_file.h>
 #include <linux/input.h>
 #include <linux/backlight.h>
+#include <linux/thermal.h>
 #include <linux/video_output.h>
 #include <asm/uaccess.h>
 
@@ -179,6 +180,7 @@ struct acpi_video_device {
 	struct acpi_device *dev;
 	struct acpi_video_device_brightness *brightness;
 	struct backlight_device *backlight;
+	struct thermal_cooling_device *cdev;
 	struct output_device *output_dev;
 };
 
@@ -342,6 +344,54 @@ static struct output_properties acpi_output_properties = {
 	.set_state = acpi_video_output_set,
 	.get_status = acpi_video_output_get,
 };
+
+
+/* thermal cooling device callbacks */
+static int video_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_video_device *video = acpi_driver_data(device);
+
+	return sprintf(buf, "%d\n", video->brightness->count - 3);
+}
+
+static int video_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_video_device *video = acpi_driver_data(device);
+	unsigned long level;
+	int state;
+
+	acpi_video_device_lcd_get_level_current(video, &level);
+	for (state = 2; state < video->brightness->count; state++)
+		if (level == video->brightness->levels[state])
+			return sprintf(buf, "%d\n",
+				       video->brightness->count - state - 1);
+
+	return -EINVAL;
+}
+
+static int
+video_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+{
+	struct acpi_device *device = cdev->devdata;
+	struct acpi_video_device *video = acpi_driver_data(device);
+	int level;
+
+	if ( state >= video->brightness->count - 2)
+		return -EINVAL;
+
+	state = video->brightness->count - state;
+	level = video->brightness->levels[state -1];
+	return acpi_video_device_lcd_set_level(video, level);
+}
+
+static struct thermal_cooling_device_ops video_cooling_ops = {
+	.get_max_state = video_get_max_state,
+	.get_cur_state = video_get_cur_state,
+	.set_cur_state = video_set_cur_state,
+};
+
 /* --------------------------------------------------------------------------
                                Video Management
    -------------------------------------------------------------------------- */
@@ -660,6 +710,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 	kfree(obj);
 
 	if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){
+		int result;
 		static int count = 0;
 		char *name;
 		name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
@@ -672,8 +723,25 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		device->backlight->props.max_brightness = device->brightness->count-3;
 		device->backlight->props.brightness = acpi_video_get_brightness(device->backlight);
 		backlight_update_status(device->backlight);
-
 		kfree(name);
+
+		device->cdev = thermal_cooling_device_register("LCD",
+					device->dev, &video_cooling_ops);
+		if (device->cdev) {
+			printk(KERN_INFO PREFIX
+				"%s is registered as cooling_device%d\n",
+				device->dev->dev.bus_id, device->cdev->id);
+			result = sysfs_create_link(&device->dev->dev.kobj,
+					  &device->cdev->device.kobj,
+					  "thermal_cooling");
+			if (result)
+				printk(KERN_ERR PREFIX "Create sysfs link\n");
+			result = sysfs_create_link(&device->cdev->device.kobj,
+					  &device->dev->dev.kobj,
+					  "device");
+                        if (result)
+				printk(KERN_ERR PREFIX "Create sysfs link\n");
+		}
 	}
 	if (device->cap._DCS && device->cap._DSS){
 		static int count = 0;
@@ -1764,6 +1832,14 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
 					    ACPI_DEVICE_NOTIFY,
 					    acpi_video_device_notify);
 	backlight_device_unregister(device->backlight);
+	if (device->cdev) {
+		sysfs_remove_link(&device->dev->dev.kobj,
+				  "thermal_cooling");
+		sysfs_remove_link(&device->cdev->device.kobj,
+				  "device");
+		thermal_cooling_device_unregister(device->cdev);
+		device->cdev = NULL;
+	}
 	video_output_unregister(device->output_dev);
 
 	return 0;

drivers/misc/Kconfig

@@ -251,4 +251,13 @@ config ATMEL_SSC
 
 	  If unsure, say N.
 
+config INTEL_MENLOW
+	tristate "Thermal Management driver for Intel menlow platform"
+	depends on ACPI_THERMAL
+	---help---
+	  ACPI thermal management enhancement driver on
+	  Intel Menlow platform.
+
+	  If unsure, say N.
+
 endif # MISC_DEVICES

drivers/misc/Makefile

@@ -17,3 +17,4 @@ obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
 obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
 obj-$(CONFIG_FUJITSU_LAPTOP)	+= fujitsu-laptop.o
 obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
+obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o

drivers/misc/intel_menlow.c

+/*
+ *  intel_menlow.c - Intel menlow Driver for thermal management extension
+ *
+ *  Copyright (C) 2008 Intel Corp
+ *  Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
+ *  Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This driver creates the sys I/F for programming the sensors.
+ *  It also implements the driver for intel menlow memory controller (hardware
+ *  id is INT0002) which makes use of the platform specific ACPI methods
+ *  to get/set bandwidth.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+
+#include <linux/thermal.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+MODULE_AUTHOR("Thomas Sujith");
+MODULE_AUTHOR("Zhang Rui");
+MODULE_DESCRIPTION("Intel Menlow platform specific driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Memory controller device control
+ */
+
+#define MEMORY_GET_BANDWIDTH "GTHS"
+#define MEMORY_SET_BANDWIDTH "STHS"
+#define MEMORY_ARG_CUR_BANDWIDTH 1
+#define MEMORY_ARG_MAX_BANDWIDTH 0
+
+static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
+					unsigned long *max_state)
+{
+	struct acpi_device *device = cdev->devdata;
+	acpi_handle handle = device->handle;
+	unsigned long value;
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+	acpi_status status = AE_OK;
+
+	arg_list.count = 1;
+	arg_list.pointer = &arg;
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = MEMORY_ARG_MAX_BANDWIDTH;
+	status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH,
+				       &arg_list, &value);
+	if (ACPI_FAILURE(status))
+		return -EFAULT;
+
+	*max_state = value - 1;
+	return 0;
+}
+
+static int memory_get_max_bandwidth(struct thermal_cooling_device *cdev,
+				    char *buf)
+{
+	unsigned long value;
+	if (memory_get_int_max_bandwidth(cdev, &value))
+		return -EINVAL;
+
+	return sprintf(buf, "%ld\n", value);
+}
+
+static int memory_get_cur_bandwidth(struct thermal_cooling_device *cdev,
+				    char *buf)
+{
+	struct acpi_device *device = cdev->devdata;
+	acpi_handle handle = device->handle;
+	unsigned long value;
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+	acpi_status status = AE_OK;
+
+	arg_list.count = 1;
+	arg_list.pointer = &arg;
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = MEMORY_ARG_CUR_BANDWIDTH;
+	status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH,
+				       &arg_list, &value);
+	if (ACPI_FAILURE(status))
+		return -EFAULT;
+
+	return sprintf(buf, "%ld\n", value);
+}
+
+static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
+				    unsigned int state)
+{
+	struct acpi_device *device = cdev->devdata;
+	acpi_handle handle = device->handle;
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+	acpi_status status;
+	int temp;
+	unsigned long max_state;
+
+	if (memory_get_int_max_bandwidth(cdev, &max_state))
+		return -EFAULT;
+
+	if (max_state < 0 || state > max_state)
+		return -EINVAL;
+
+	arg_list.count = 1;
+	arg_list.pointer = &arg;
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = state;
+
+	status =
+	    acpi_evaluate_integer(handle, MEMORY_SET_BANDWIDTH, &arg_list,
+				  (unsigned long *)&temp);
+
+	printk(KERN_INFO
+	       "Bandwidth value was %d: status is %d\n", state, status);
+	if (ACPI_FAILURE(status))
+		return -EFAULT;
+
+	return 0;
+}
+
+static struct thermal_cooling_device_ops memory_cooling_ops = {
+	.get_max_state = memory_get_max_bandwidth,
+	.get_cur_state = memory_get_cur_bandwidth,
+	.set_cur_state = memory_set_cur_bandwidth,
+};
+
+/*
+ * Memory Device Management
+ */
+static int intel_menlow_memory_add(struct acpi_device *device)
+{
+	int result = -ENODEV;
+	acpi_status status = AE_OK;
+	acpi_handle dummy;
+	struct thermal_cooling_device *cdev;
+
+	if (!device)
+		return -EINVAL;
+
+	status = acpi_get_handle(device->handle, MEMORY_GET_BANDWIDTH, &dummy);
+	if (ACPI_FAILURE(status))
+		goto end;
+
+	status = acpi_get_handle(device->handle, MEMORY_SET_BANDWIDTH, &dummy);
+	if (ACPI_FAILURE(status))
+		goto end;
+
+	cdev = thermal_cooling_device_register("Memory controller", device,
+					       &memory_cooling_ops);
+	acpi_driver_data(device) = cdev;
+	if (!cdev)
+		result = -ENODEV;
+	else {
+		result = sysfs_create_link(&device->dev.kobj,
+					&cdev->device.kobj, "thermal_cooling");
+		if (result)
+			goto unregister;
+
+		result = sysfs_create_link(&cdev->device.kobj,
+					&device->dev.kobj, "device");
+		if (result) {
+			sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+			goto unregister;
+		}
+	}
+
+ end:
+	return result;
+
+ unregister:
+	thermal_cooling_device_unregister(cdev);
+	return result;
+
+}
+
+static int intel_menlow_memory_remove(struct acpi_device *device, int type)
+{
+	struct thermal_cooling_device *cdev = acpi_driver_data(device);
+
+	if (!device || !cdev)
+		return -EINVAL;
+
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+	sysfs_remove_link(&cdev->device.kobj, "device");
+	thermal_cooling_device_unregister(cdev);
+
+	return 0;
+}
+
+const static struct acpi_device_id intel_menlow_memory_ids[] = {
+	{"INT0002", 0},
+	{"", 0},
+};
+
+static struct acpi_driver intel_menlow_memory_driver = {
+	.name = "intel_menlow_thermal_control",
+	.ids = intel_menlow_memory_ids,
+	.ops = {
+		.add = intel_menlow_memory_add,
+		.remove = intel_menlow_memory_remove,
+		},
+};
+
+/*
+ * Sensor control on menlow platform
+ */
+
+#define THERMAL_AUX0 0
+#define THERMAL_AUX1 1
+#define GET_AUX0 "GAX0"
+#define GET_AUX1 "GAX1"
+#define SET_AUX0 "SAX0"
+#define SET_AUX1 "SAX1"
+
+struct intel_menlow_attribute {
+	struct device_attribute attr;
+	struct device *device;
+	acpi_handle handle;
+	struct list_head node;
+};
+
+static LIST_HEAD(intel_menlow_attr_list);
+static DEFINE_MUTEX(intel_menlow_attr_lock);
+
+/*
+ * sensor_get_auxtrip - get the current auxtrip value from sensor
+ * @name: Thermalzone name
+ * @auxtype : AUX0/AUX1
+ * @buf: syfs buffer
+ */
+static int sensor_get_auxtrip(acpi_handle handle, int index, int *value)
+{
+	acpi_status status;
+
+	if ((index != 0 && index != 1) || !value)
+		return -EINVAL;
+
+	status = acpi_evaluate_integer(handle, index ? GET_AUX1 : GET_AUX0,
+				       NULL, (unsigned long *)value);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * sensor_set_auxtrip - set the new auxtrip value to sensor
+ * @name: Thermalzone name
+ * @auxtype : AUX0/AUX1
+ * @buf: syfs buffer
+ */
+static int sensor_set_auxtrip(acpi_handle handle, int index, int value)
+{
+	acpi_status status;
+	union acpi_object arg = {
+		ACPI_TYPE_INTEGER
+	};
+	struct acpi_object_list args = {
+		1, &arg
+	};
+	int temp;
+
+	if (index != 0 && index != 1)
+		return -EINVAL;
+
+	status = acpi_evaluate_integer(handle, index ? GET_AUX0 : GET_AUX1,
+				       NULL, (unsigned long *)&temp);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+	if ((index && value < temp) || (!index && value > temp))
+		return -EINVAL;
+
+	arg.integer.value = value;
+	status = acpi_evaluate_integer(handle, index ? SET_AUX1 : SET_AUX0,
+				       &args, (unsigned long *)&temp);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	/* do we need to check the return value of SAX0/SAX1 ? */
+
+	return 0;
+}
+
+#define to_intel_menlow_attr(_attr)	\
+	container_of(_attr, struct intel_menlow_attribute, attr)
+
+static ssize_t aux0_show(struct device *dev,
+			 struct device_attribute *dev_attr, char *buf)
+{
+	struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+	int value;
+	int result;
+
+	result = sensor_get_auxtrip(attr->handle, 0, &value);
+
+	return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value));
+}
+
+static ssize_t aux1_show(struct device *dev,
+			 struct device_attribute *dev_attr, char *buf)
+{
+	struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+	int value;
+	int result;
+
+	result = sensor_get_auxtrip(attr->handle, 1, &value);
+
+	return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value));
+}
+
+static ssize_t aux0_store(struct device *dev,
+			  struct device_attribute *dev_attr,
+			  const char *buf, size_t count)
+{
+	struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+	int value;
+	int result;
+
+	/*Sanity check; should be a positive integer */
+	if (!sscanf(buf, "%d", &value))
+		return -EINVAL;
+
+	if (value < 0)
+		return -EINVAL;
+
+	result = sensor_set_auxtrip(attr->handle, 0, CELSIUS_TO_KELVIN(value));
+	return result ? result : count;
+}
+
+static ssize_t aux1_store(struct device *dev,
+			  struct device_attribute *dev_attr,
+			  const char *buf, size_t count)
+{
+	struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+	int value;
+	int result;
+
+	/*Sanity check; should be a positive integer */
+	if (!sscanf(buf, "%d", &value))
+		return -EINVAL;
+
+	if (value < 0)
+		return -EINVAL;
+
+	result = sensor_set_auxtrip(attr->handle, 1, CELSIUS_TO_KELVIN(value));
+	return result ? result : count;
+}
+
+/* BIOS can enable/disable the thermal user application in dabney platform */
+#define BIOS_ENABLED "\\_TZ.GSTS"
+static ssize_t bios_enabled_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	acpi_status status;
+	unsigned long bios_enabled;
+
+	status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &bios_enabled);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	return sprintf(buf, "%s\n", bios_enabled ? "enabled" : "disabled");
+}
+
+static int intel_menlow_add_one_attribute(char *name, int mode, void *show,
+					  void *store, struct device *dev,
+					  acpi_handle handle)
+{
+	struct intel_menlow_attribute *attr;
+	int result;
+
+	attr = kzalloc(sizeof(struct intel_menlow_attribute), GFP_KERNEL);
+	if (!attr)
+		return -ENOMEM;
+
+	attr->attr.attr.name = name;
+	attr->attr.attr.mode = mode;
+	attr->attr.show = show;
+	attr->attr.store = store;
+	attr->device = dev;
+	attr->handle = handle;
+
+	result = device_create_file(dev, &attr->attr);
+	if (result)
+		return result;
+
+	mutex_lock(&intel_menlow_attr_lock);
+	list_add_tail(&attr->node, &intel_menlow_attr_list);
+	mutex_unlock(&intel_menlow_attr_lock);
+
+	return 0;
+}
+
+static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
+						void *context, void **rv)
+{
+	acpi_status status;
+	acpi_handle dummy;
+	struct thermal_zone_device *thermal;
+	int result;
+
+	result = acpi_bus_get_private_data(handle, (void **)&thermal);
+	if (result)
+		return 0;
+
+	/* _TZ must have the AUX0/1 methods */
+	status = acpi_get_handle(handle, GET_AUX0, &dummy);
+	if (ACPI_FAILURE(status))
+		goto not_found;
+
+	status = acpi_get_handle(handle, SET_AUX0, &dummy);
+	if (ACPI_FAILURE(status))
+		goto not_found;
+
+	result = intel_menlow_add_one_attribute("aux0", 0644,
+						aux0_show, aux0_store,
+						&thermal->device, handle);
+	if (result)
+		return AE_ERROR;
+
+	status = acpi_get_handle(handle, GET_AUX1, &dummy);
+	if (ACPI_FAILURE(status))
+		goto not_found;
+
+	status = acpi_get_handle(handle, SET_AUX1, &dummy);
+	if (ACPI_FAILURE(status))
+		goto not_found;
+
+	result = intel_menlow_add_one_attribute("aux1", 0644,
+						aux1_show, aux1_store,
+						&thermal->device, handle);
+	if (result)
+		return AE_ERROR;
+
+	/*
+	 * create the "dabney_enabled" attribute which means the user app
+	 * should be loaded or not
+	 */
+
+	result = intel_menlow_add_one_attribute("bios_enabled", 0444,
+						bios_enabled_show, NULL,
+						&thermal->device, handle);
+	if (result)
+		return AE_ERROR;
+
+ not_found:
+	if (status == AE_NOT_FOUND)
+		return AE_OK;
+	else
+		return status;
+}
+
+static void intel_menlow_unregister_sensor(void)
+{
+	struct intel_menlow_attribute *pos, *next;
+
+	mutex_lock(&intel_menlow_attr_lock);
+	list_for_each_entry_safe(pos, next, &intel_menlow_attr_list, node) {
+		list_del(&pos->node);
+		device_remove_file(pos->device, &pos->attr);
+		kfree(pos);
+	}
+	mutex_unlock(&intel_menlow_attr_lock);
+
+	return;
+}
+
+static int __init intel_menlow_module_init(void)
+{
+	int result = -ENODEV;
+	acpi_status status;
+	unsigned long enable;
+
+	if (acpi_disabled)
+		return result;
+
+	/* Looking for the \_TZ.GSTS method */
+	status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &enable);
+	if (ACPI_FAILURE(status) || !enable)
+		return -ENODEV;
+
+	/* Looking for ACPI device MEM0 with hardware id INT0002 */
+	result = acpi_bus_register_driver(&intel_menlow_memory_driver);
+	if (result)
+		return result;
+
+	/* Looking for sensors in each ACPI thermal zone */
+	status = acpi_walk_namespace(ACPI_TYPE_THERMAL, ACPI_ROOT_OBJECT,
+				     ACPI_UINT32_MAX,
+				     intel_menlow_register_sensor, NULL, NULL);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	return 0;
+}
+
+static void __exit intel_menlow_module_exit(void)
+{
+	acpi_bus_unregister_driver(&intel_menlow_memory_driver);
+	intel_menlow_unregister_sensor();
+}
+
+module_init(intel_menlow_module_init);
+module_exit(intel_menlow_module_exit);

drivers/thermal/Kconfig

+#
+# Generic thermal sysfs drivers configuration
+#
+
+menuconfig THERMAL
+	bool "Generic Thermal sysfs driver"
+	default y
+	help
+	  Generic Thermal Sysfs driver offers a generic mechanism for
+	  thermal management. Usually it's made up of one or more thermal
+	  zone and cooling device.
+	  each thermal zone contains its own temperature, trip points,
+	  cooling devices.
+	  All platforms with ACPI thermal support can use this driver.
+	  If you want this support, you should say Y here

drivers/thermal/Makefile

+#
+# Makefile for sensor chip drivers.
+#
+
+obj-$(CONFIG_THERMAL)		+= thermal.o

drivers/thermal/thermal.c

+/*
+ *  thermal.c - Generic Thermal Management Sysfs support.
+ *
+ *  Copyright (C) 2008 Intel Corp
+ *  Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
+ *  Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/idr.h>
+#include <linux/thermal.h>
+#include <linux/spinlock.h>
+
+MODULE_AUTHOR("Zhang Rui")
+MODULE_DESCRIPTION("Generic thermal management sysfs support");
+MODULE_LICENSE("GPL");
+
+#define PREFIX "Thermal: "
+
+struct thermal_cooling_device_instance {
+	int id;
+	char name[THERMAL_NAME_LENGTH];
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *cdev;
+	int trip;
+	char attr_name[THERMAL_NAME_LENGTH];
+	struct device_attribute attr;
+	struct list_head node;
+};
+
+static DEFINE_IDR(thermal_tz_idr);
+static DEFINE_IDR(thermal_cdev_idr);
+static DEFINE_MUTEX(thermal_idr_lock);
+
+static LIST_HEAD(thermal_tz_list);
+static LIST_HEAD(thermal_cdev_list);
+static DEFINE_MUTEX(thermal_list_lock);
+
+static int get_idr(struct idr *idr, struct mutex *lock, int *id)
+{
+	int err;
+
+      again:
+	if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0))
+		return -ENOMEM;
+
+	if (lock)
+		mutex_lock(lock);
+	err = idr_get_new(idr, NULL, id);
+	if (lock)
+		mutex_unlock(lock);
+	if (unlikely(err == -EAGAIN))
+		goto again;
+	else if (unlikely(err))
+		return err;
+
+	*id = *id & MAX_ID_MASK;
+	return 0;
+}
+
+static void release_idr(struct idr *idr, struct mutex *lock, int id)
+{
+	if (lock)
+		mutex_lock(lock);
+	idr_remove(idr, id);
+	if (lock)
+		mutex_unlock(lock);
+}
+
+/* sys I/F for thermal zone */
+
+#define to_thermal_zone(_dev) \
+	container_of(_dev, struct thermal_zone_device, device)
+
+static ssize_t
+type_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+
+	return sprintf(buf, "%s\n", tz->type);
+}
+
+static ssize_t
+temp_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+
+	if (!tz->ops->get_temp)
+		return -EPERM;
+
+	return tz->ops->get_temp(tz, buf);
+}
+
+static ssize_t
+mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+
+	if (!tz->ops->get_mode)
+		return -EPERM;
+
+	return tz->ops->get_mode(tz, buf);
+}
+
+static ssize_t
+mode_store(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int result;
+
+	if (!tz->ops->set_mode)
+		return -EPERM;
+
+	result = tz->ops->set_mode(tz, buf);
+	if (result)
+		return result;
+
+	return count;
+}
+
+static ssize_t
+trip_point_type_show(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int trip;
+
+	if (!tz->ops->get_trip_type)
+		return -EPERM;
+
+	if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
+		return -EINVAL;
+
+	return tz->ops->get_trip_type(tz, trip, buf);
+}
+
+static ssize_t
+trip_point_temp_show(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	int trip;
+
+	if (!tz->ops->get_trip_temp)
+		return -EPERM;
+
+	if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
+		return -EINVAL;
+
+	return tz->ops->get_trip_temp(tz, trip, buf);
+}
+
+static DEVICE_ATTR(type, 0444, type_show, NULL);
+static DEVICE_ATTR(temp, 0444, temp_show, NULL);
+static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
+
+static struct device_attribute trip_point_attrs[] = {
+	__ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_0_temp, 0444, trip_point_temp_show, NULL),
+	__ATTR(trip_point_1_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_1_temp, 0444, trip_point_temp_show, NULL),
+	__ATTR(trip_point_2_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_2_temp, 0444, trip_point_temp_show, NULL),
+	__ATTR(trip_point_3_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_3_temp, 0444, trip_point_temp_show, NULL),
+	__ATTR(trip_point_4_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_4_temp, 0444, trip_point_temp_show, NULL),
+	__ATTR(trip_point_5_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_5_temp, 0444, trip_point_temp_show, NULL),
+	__ATTR(trip_point_6_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_6_temp, 0444, trip_point_temp_show, NULL),
+	__ATTR(trip_point_7_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_7_temp, 0444, trip_point_temp_show, NULL),
+	__ATTR(trip_point_8_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL),
+	__ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL),
+	__ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL),
+};
+
+#define TRIP_POINT_ATTR_ADD(_dev, _index, result)     \
+do {    \
+	result = device_create_file(_dev,	\
+				&trip_point_attrs[_index * 2]);	\
+	if (result)	\
+		break;	\
+	result = device_create_file(_dev,	\
+			&trip_point_attrs[_index * 2 + 1]);	\
+} while (0)
+
+#define TRIP_POINT_ATTR_REMOVE(_dev, _index)	\
+do {	\
+	device_remove_file(_dev, &trip_point_attrs[_index * 2]);	\
+	device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]);	\
+} while (0)
+
+/* sys I/F for cooling device */
+#define to_cooling_device(_dev)	\
+	container_of(_dev, struct thermal_cooling_device, device)
+
+static ssize_t
+thermal_cooling_device_type_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+
+	return sprintf(buf, "%s\n", cdev->type);
+}
+
+static ssize_t
+thermal_cooling_device_max_state_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+
+	return cdev->ops->get_max_state(cdev, buf);
+}
+
+static ssize_t
+thermal_cooling_device_cur_state_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+
+	return cdev->ops->get_cur_state(cdev, buf);
+}
+
+static ssize_t
+thermal_cooling_device_cur_state_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	int state;
+	int result;
+
+	if (!sscanf(buf, "%d\n", &state))
+		return -EINVAL;
+
+	if (state < 0)
+		return -EINVAL;
+
+	result = cdev->ops->set_cur_state(cdev, state);
+	if (result)
+		return result;
+	return count;
+}
+
+static struct device_attribute dev_attr_cdev_type =
+		__ATTR(type, 0444, thermal_cooling_device_type_show, NULL);
+static DEVICE_ATTR(max_state, 0444,
+		   thermal_cooling_device_max_state_show, NULL);
+static DEVICE_ATTR(cur_state, 0644,
+		   thermal_cooling_device_cur_state_show,
+		   thermal_cooling_device_cur_state_store);
+
+static ssize_t
+thermal_cooling_device_trip_point_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct thermal_cooling_device_instance *instance;
+
+	instance =
+	    container_of(attr, struct thermal_cooling_device_instance, attr);
+
+	if (instance->trip == THERMAL_TRIPS_NONE)
+		return sprintf(buf, "-1\n");
+	else
+		return sprintf(buf, "%d\n", instance->trip);
+}
+
+/* Device management */
+
+/**
+ * thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone
+ * this function is usually called in the thermal zone device .bind callback.
+ * @tz:		thermal zone device
+ * @trip:	indicates which trip point the cooling devices is
+ *		associated with in this thermal zone.
+ * @cdev:	thermal cooling device
+ */
+int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
+				     int trip,
+				     struct thermal_cooling_device *cdev)
+{
+	struct thermal_cooling_device_instance *dev;
+	struct thermal_cooling_device_instance *pos;
+	int result;
+
+	if (trip >= tz->trips ||
+	    (trip < 0 && trip != THERMAL_TRIPS_NONE))
+		return -EINVAL;
+
+	if (!tz || !cdev)
+		return -EINVAL;
+
+	dev =
+	    kzalloc(sizeof(struct thermal_cooling_device_instance), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+	dev->tz = tz;
+	dev->cdev = cdev;
+	dev->trip = trip;
+	result = get_idr(&tz->idr, &tz->lock, &dev->id);
+	if (result)
+		goto free_mem;
+
+	sprintf(dev->name, "cdev%d", dev->id);
+	result =
+	    sysfs_create_link(&tz->device.kobj, &cdev->device.kobj, dev->name);
+	if (result)
+		goto release_idr;
+
+	sprintf(dev->attr_name, "cdev%d_trip_point", dev->id);
+	dev->attr.attr.name = dev->attr_name;
+	dev->attr.attr.mode = 0444;
+	dev->attr.show = thermal_cooling_device_trip_point_show;
+	result = device_create_file(&tz->device, &dev->attr);
+	if (result)
+		goto remove_symbol_link;
+
+	mutex_lock(&tz->lock);
+	list_for_each_entry(pos, &tz->cooling_devices, node)
+	    if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
+		result = -EEXIST;
+		break;
+	}
+	if (!result)
+		list_add_tail(&dev->node, &tz->cooling_devices);
+	mutex_unlock(&tz->lock);
+
+	if (!result)
+		return 0;
+
+	device_remove_file(&tz->device, &dev->attr);
+      remove_symbol_link:
+	sysfs_remove_link(&tz->device.kobj, dev->name);
+      release_idr:
+	release_idr(&tz->idr, &tz->lock, dev->id);
+      free_mem:
+	kfree(dev);
+	return result;
+}
+EXPORT_SYMBOL(thermal_zone_bind_cooling_device);
+
+/**
+ * thermal_zone_unbind_cooling_device - unbind a cooling device from a thermal zone
+ * this function is usually called in the thermal zone device .unbind callback.
+ * @tz:		thermal zone device
+ * @trip:	indicates which trip point the cooling devices is
+ *		associated with in this thermal zone.
+ * @cdev:	thermal cooling device
+ */
+int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
+				       int trip,
+				       struct thermal_cooling_device *cdev)
+{
+	struct thermal_cooling_device_instance *pos, *next;
+
+	mutex_lock(&tz->lock);
+	list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) {
+		if (pos->tz == tz && pos->trip == trip
+		    && pos->cdev == cdev) {
+			list_del(&pos->node);
+			mutex_unlock(&tz->lock);
+			goto unbind;
+		}
+	}
+	mutex_unlock(&tz->lock);
+
+	return -ENODEV;
+
+      unbind:
+	device_remove_file(&tz->device, &pos->attr);
+	sysfs_remove_link(&tz->device.kobj, pos->name);
+	release_idr(&tz->idr, &tz->lock, pos->id);
+	kfree(pos);
+	return 0;
+}
+EXPORT_SYMBOL(thermal_zone_unbind_cooling_device);
+
+static void thermal_release(struct device *dev)
+{
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *cdev;
+
+	if (!strncmp(dev->bus_id, "thermal_zone", sizeof "thermal_zone" - 1)) {
+		tz = to_thermal_zone(dev);
+		kfree(tz);
+	} else {
+		cdev = to_cooling_device(dev);
+		kfree(cdev);
+	}
+}
+
+static struct class thermal_class = {
+	.name = "thermal",
+	.dev_release = thermal_release,
+};
+
+/**
+ * thermal_cooling_device_register - register a new thermal cooling device
+ * @type:	the thermal cooling device type.
+ * @devdata:	device private data.
+ * @ops:		standard thermal cooling devices callbacks.
+ */
+struct thermal_cooling_device *thermal_cooling_device_register(char *type,
+		       void *devdata, struct thermal_cooling_device_ops *ops)
+{
+	struct thermal_cooling_device *cdev;
+	struct thermal_zone_device *pos;
+	int result;
+
+	if (strlen(type) >= THERMAL_NAME_LENGTH)
+		return NULL;
+
+	if (!ops || !ops->get_max_state || !ops->get_cur_state ||
+		!ops->set_cur_state)
+		return NULL;
+
+	cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL);
+	if (!cdev)
+		return NULL;
+
+	result = get_idr(&thermal_cdev_idr, &thermal_idr_lock, &cdev->id);
+	if (result) {
+		kfree(cdev);
+		return NULL;
+	}
+
+	strcpy(cdev->type, type);
+	cdev->ops = ops;
+	cdev->device.class = &thermal_class;
+	cdev->devdata = devdata;
+	sprintf(cdev->device.bus_id, "cooling_device%d", cdev->id);
+	result = device_register(&cdev->device);
+	if (result) {
+		release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
+		kfree(cdev);
+		return NULL;
+	}
+
+	/* sys I/F */
+	if (type) {
+		result = device_create_file(&cdev->device,
+					    &dev_attr_cdev_type);
+		if (result)
+			goto unregister;
+	}
+
+	result = device_create_file(&cdev->device, &dev_attr_max_state);
+	if (result)
+		goto unregister;
+
+	result = device_create_file(&cdev->device, &dev_attr_cur_state);
+	if (result)
+		goto unregister;
+
+	mutex_lock(&thermal_list_lock);
+	list_add(&cdev->node, &thermal_cdev_list);
+	list_for_each_entry(pos, &thermal_tz_list, node) {
+		if (!pos->ops->bind)
+			continue;
+		result = pos->ops->bind(pos, cdev);
+		if (result)
+			break;
+
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	if (!result)
+		return cdev;
+
+      unregister:
+	release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
+	device_unregister(&cdev->device);
+	return NULL;
+}
+EXPORT_SYMBOL(thermal_cooling_device_register);
+
+/**
+ * thermal_cooling_device_unregister - removes the registered thermal cooling device
+ *
+ * @cdev:	the thermal cooling device to remove.
+ *
+ * thermal_cooling_device_unregister() must be called when the device is no
+ * longer needed.
+ */
+void thermal_cooling_device_unregister(struct
+				       thermal_cooling_device
+				       *cdev)
+{
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *pos = NULL;
+
+	if (!cdev)
+		return;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(pos, &thermal_cdev_list, node)
+	    if (pos == cdev)
+		break;
+	if (pos != cdev) {
+		/* thermal cooling device not found */
+		mutex_unlock(&thermal_list_lock);
+		return;
+	}
+	list_del(&cdev->node);
+	list_for_each_entry(tz, &thermal_tz_list, node) {
+		if (!tz->ops->unbind)
+			continue;
+		tz->ops->unbind(tz, cdev);
+	}
+	mutex_unlock(&thermal_list_lock);
+	if (cdev->type[0])
+		device_remove_file(&cdev->device,
+				   &dev_attr_cdev_type);
+	device_remove_file(&cdev->device, &dev_attr_max_state);
+	device_remove_file(&cdev->device, &dev_attr_cur_state);
+
+	release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
+	device_unregister(&cdev->device);
+	return;
+}
+EXPORT_SYMBOL(thermal_cooling_device_unregister);
+
+/**
+ * thermal_zone_device_register - register a new thermal zone device
+ * @type:	the thermal zone device type
+ * @trips:	the number of trip points the thermal zone support
+ * @devdata:	private device data
+ * @ops:	standard thermal zone device callbacks
+ *
+ * thermal_zone_device_unregister() must be called when the device is no
+ * longer needed.
+ */
+struct thermal_zone_device *thermal_zone_device_register(char *type,
+					int trips, void *devdata,
+					struct thermal_zone_device_ops *ops)
+{
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *pos;
+	int result;
+	int count;
+
+	if (strlen(type) >= THERMAL_NAME_LENGTH)
+		return NULL;
+
+	if (trips > THERMAL_MAX_TRIPS || trips < 0)
+		return NULL;
+
+	if (!ops || !ops->get_temp)
+		return NULL;
+
+	tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL);
+	if (!tz)
+		return NULL;
+
+	INIT_LIST_HEAD(&tz->cooling_devices);
+	idr_init(&tz->idr);
+	mutex_init(&tz->lock);
+	result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id);
+	if (result) {
+		kfree(tz);
+		return NULL;
+	}
+
+	strcpy(tz->type, type);
+	tz->ops = ops;
+	tz->device.class = &thermal_class;
+	tz->devdata = devdata;
+	tz->trips = trips;
+	sprintf(tz->device.bus_id, "thermal_zone%d", tz->id);
+	result = device_register(&tz->device);
+	if (result) {
+		release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
+		kfree(tz);
+		return NULL;
+	}
+
+	/* sys I/F */
+	if (type) {
+		result = device_create_file(&tz->device, &dev_attr_type);
+		if (result)
+			goto unregister;
+	}
+
+	result = device_create_file(&tz->device, &dev_attr_temp);
+	if (result)
+		goto unregister;
+
+	if (ops->get_mode) {
+		result = device_create_file(&tz->device, &dev_attr_mode);
+		if (result)
+			goto unregister;
+	}
+
+	for (count = 0; count < trips; count++) {
+		TRIP_POINT_ATTR_ADD(&tz->device, count, result);
+		if (result)
+			goto unregister;
+	}
+
+	mutex_lock(&thermal_list_lock);
+	list_add_tail(&tz->node, &thermal_tz_list);
+	if (ops->bind)
+		list_for_each_entry(pos, &thermal_cdev_list, node) {
+			result = ops->bind(tz, pos);
+			if (result)
+				break;
+		}
+	mutex_unlock(&thermal_list_lock);
+
+	if (!result)
+		return tz;
+
+      unregister:
+	release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
+	device_unregister(&tz->device);
+	return NULL;
+}
+EXPORT_SYMBOL(thermal_zone_device_register);
+
+/**
+ * thermal_device_unregister - removes the registered thermal zone device
+ *
+ * @tz: the thermal zone device to remove
+ */
+void thermal_zone_device_unregister(struct thermal_zone_device *tz)
+{
+	struct thermal_cooling_device *cdev;
+	struct thermal_zone_device *pos = NULL;
+	int count;
+
+	if (!tz)
+		return;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(pos, &thermal_tz_list, node)
+	    if (pos == tz)
+		break;
+	if (pos != tz) {
+		/* thermal zone device not found */
+		mutex_unlock(&thermal_list_lock);
+		return;
+	}
+	list_del(&tz->node);
+	if (tz->ops->unbind)
+		list_for_each_entry(cdev, &thermal_cdev_list, node)
+		    tz->ops->unbind(tz, cdev);
+	mutex_unlock(&thermal_list_lock);
+
+	if (tz->type[0])
+		device_remove_file(&tz->device, &dev_attr_type);
+	device_remove_file(&tz->device, &dev_attr_temp);
+	if (tz->ops->get_mode)
+		device_remove_file(&tz->device, &dev_attr_mode);
+
+	for (count = 0; count < tz->trips; count++)
+		TRIP_POINT_ATTR_REMOVE(&tz->device, count);
+
+	release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
+	idr_destroy(&tz->idr);
+	mutex_destroy(&tz->lock);
+	device_unregister(&tz->device);
+	return;
+}
+EXPORT_SYMBOL(thermal_zone_device_unregister);
+
+static int __init thermal_init(void)
+{
+	int result = 0;
+
+	result = class_register(&thermal_class);
+	if (result) {
+		idr_destroy(&thermal_tz_idr);
+		idr_destroy(&thermal_cdev_idr);
+		mutex_destroy(&thermal_idr_lock);
+		mutex_destroy(&thermal_list_lock);
+	}
+	return result;
+}
+
+static void __exit thermal_exit(void)
+{
+	class_unregister(&thermal_class);
+	idr_destroy(&thermal_tz_idr);
+	idr_destroy(&thermal_cdev_idr);
+	mutex_destroy(&thermal_idr_lock);
+	mutex_destroy(&thermal_list_lock);
+}
+
+subsys_initcall(thermal_init);
+module_exit(thermal_exit);

include/acpi/acpi_bus.h

@@ -321,6 +321,8 @@ struct acpi_bus_event {
 
 extern struct kobject *acpi_kobj;
 extern int acpi_bus_generate_netlink_event(const char*, const char*, u8, int);
+void acpi_bus_private_data_handler(acpi_handle, u32, void *);
+int acpi_bus_get_private_data(acpi_handle, void **);
 /*
  * External Functions
  */

include/acpi/processor.h

@@ -4,7 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/cpu.h>
 #include <linux/cpuidle.h>
-
+#include <linux/thermal.h>
 #include <asm/acpi.h>
 
 #define ACPI_PROCESSOR_BUSY_METRIC	10
@@ -219,7 +219,7 @@ struct acpi_processor {
 	struct acpi_processor_performance *performance;
 	struct acpi_processor_throttling throttling;
 	struct acpi_processor_limit limit;
-
+	struct thermal_cooling_device *cdev;
 	/* the _PDC objects for this processor, if any */
 	struct acpi_object_list *pdc;
 };
@@ -331,7 +331,7 @@ extern struct cpuidle_driver acpi_idle_driver;
 /* in processor_thermal.c */
 int acpi_processor_get_limit_info(struct acpi_processor *pr);
 extern struct file_operations acpi_processor_limit_fops;
-
+extern struct thermal_cooling_device_ops processor_cooling_ops;
 #ifdef CONFIG_CPU_FREQ
 void acpi_thermal_cpufreq_init(void);
 void acpi_thermal_cpufreq_exit(void);

include/linux/thermal.h

+/*
+ *  thermal.h  ($Revision: 0 $)
+ *
+ *  Copyright (C) 2008  Intel Corp
+ *  Copyright (C) 2008  Zhang Rui <rui.zhang@intel.com>
+ *  Copyright (C) 2008  Sujith Thomas <sujith.thomas@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __THERMAL_H__
+#define __THERMAL_H__
+
+#include <linux/idr.h>
+#include <linux/device.h>
+
+struct thermal_zone_device;
+struct thermal_cooling_device;
+
+struct thermal_zone_device_ops {
+	int (*bind) (struct thermal_zone_device *,
+		     struct thermal_cooling_device *);
+	int (*unbind) (struct thermal_zone_device *,
+		       struct thermal_cooling_device *);
+	int (*get_temp) (struct thermal_zone_device *, char *);
+	int (*get_mode) (struct thermal_zone_device *, char *);
+	int (*set_mode) (struct thermal_zone_device *, const char *);
+	int (*get_trip_type) (struct thermal_zone_device *, int, char *);
+	int (*get_trip_temp) (struct thermal_zone_device *, int, char *);
+};
+
+struct thermal_cooling_device_ops {
+	int (*get_max_state) (struct thermal_cooling_device *, char *);
+	int (*get_cur_state) (struct thermal_cooling_device *, char *);
+	int (*set_cur_state) (struct thermal_cooling_device *, unsigned int);
+};
+
+#define THERMAL_TRIPS_NONE -1
+#define THERMAL_MAX_TRIPS 10
+#define THERMAL_NAME_LENGTH 20
+struct thermal_cooling_device {
+	int id;
+	char type[THERMAL_NAME_LENGTH];
+	struct device device;
+	void *devdata;
+	struct thermal_cooling_device_ops *ops;
+	struct list_head node;
+};
+
+#define KELVIN_TO_CELSIUS(t)	(long)(((long)t-2732 >= 0) ?	\
+				((long)t-2732+5)/10 : ((long)t-2732-5)/10)
+#define CELSIUS_TO_KELVIN(t)	((t)*10+2732)
+
+struct thermal_zone_device {
+	int id;
+	char type[THERMAL_NAME_LENGTH];
+	struct device device;
+	void *devdata;
+	int trips;
+	struct thermal_zone_device_ops *ops;
+	struct list_head cooling_devices;
+	struct idr idr;
+	struct mutex lock;	/* protect cooling devices list */
+	struct list_head node;
+};
+
+struct thermal_zone_device *thermal_zone_device_register(char *, int, void *,
+					struct thermal_zone_device_ops *);
+void thermal_zone_device_unregister(struct thermal_zone_device *);
+
+int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
+				     struct thermal_cooling_device *);
+int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
+				       struct thermal_cooling_device *);
+
+struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
+					struct thermal_cooling_device_ops *);
+void thermal_cooling_device_unregister(struct thermal_cooling_device *);
+
+#endif				/* __THERMAL_H__ */