Skip to content

L
linux
Commit 2855bb79 authored by Pekka Enberg's avatar Pekka Enberg Committed by Greg Kroah-Hartman
Browse files
Options

Staging: w35und: Use pr_debug() for debugging 

Use pr_debug() for debugging printk's and kill the FULL_DEBUG macro. It would
be even better to use dev_dbg() but unfortunately looking up struct device in
the current code structure makes things very ugly.

Please note that I dropped the DataDmp() calls from
RFSynthesizer_SwitchingChannel() because that function doesn't exist.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarPekka Enberg <penberg@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent a4170e3d
Hide whitespace changes
Inline Side-by-side
Showing with 26 additions and 99 deletions
drivers/staging/winbond/mds.c
View file @ 2855bb79
......@@ -346,9 +346,7 @@ static void Mds_HeaderCopy(struct wbsoft_priv *adapter, struct wb35_descriptor *
ctmp1 = ctmpf = CURRENT_TX_RATE_FOR_MNG;
pDes->TxRate = ctmp1;
#ifdef _PE_TX_DUMP_
printk("Tx rate =%x\n", ctmp1);
#endif
pr_debug("Tx rate =%x\n", ctmp1);
pT01->T01_modulation_type = (ctmp1%3) ? 0 : 1;
......@@ -426,9 +424,7 @@ Mds_Tx(struct wbsoft_priv *adapter)
do {
FillIndex = pMds->TxFillIndex;
if (pMds->TxOwner[FillIndex]) { /* Is owned by software 0:Yes 1:No */
#ifdef _PE_TX_DUMP_
printk("[Mds_Tx] Tx Owner is H/W.\n");
#endif
pr_debug("[Mds_Tx] Tx Owner is H/W.\n");
break;
}
......@@ -472,9 +468,7 @@ Mds_Tx(struct wbsoft_priv *adapter)
/* For speed up Key setting */
if (pTxDes->EapFix) {
#ifdef _PE_TX_DUMP_
printk("35: EPA 4th frame detected. Size = %d\n", PacketSize);
#endif
pr_debug("35: EPA 4th frame detected. Size = %d\n", PacketSize);
pHwData->IsKeyPreSet = 1;
}
......@@ -563,9 +557,7 @@ Mds_SendComplete(struct wbsoft_priv *adapter, struct T02_descriptor *pT02)
pHwData->tx_retry_count[RetryCount] += RetryCount;
else
pHwData->tx_retry_count[7] += RetryCount;
#ifdef _PE_STATE_DUMP_
printk("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count);
#endif
pr_debug("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count);
MTO_SetTxCount(adapter, TxRate, RetryCount);
}
pHwData->dto_tx_frag_count += (RetryCount+1);
......
drivers/staging/winbond/reg.c
View file @ 2855bb79
......@@ -1012,9 +1012,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
case RF_AIROHA_7230:
/* Start to fill RF parameters, PLL_ON should be pulled low. */
Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
#ifdef _PE_STATE_DUMP_
printk("* PLL_ON low\n");
#endif
pr_debug("* PLL_ON low\n");
number = ARRAY_SIZE(al7230_rf_data_24);
Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
break;
......@@ -1100,9 +1098,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
case RF_AIROHA_7230:
/* RF parameters have filled completely, PLL_ON should be pulled high */
Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
#ifdef _PE_STATE_DUMP_
printk("* PLL_ON high\n");
#endif
pr_debug("* PLL_ON high\n");
/* 2.4GHz */
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
......@@ -1117,9 +1113,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
/* 5GHz */
Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
#ifdef _PE_STATE_DUMP_
printk("* PLL_ON low\n");
#endif
pr_debug("* PLL_ON low\n");
number = ARRAY_SIZE(al7230_rf_data_50);
Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
......@@ -1129,9 +1123,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
msleep(5);
Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
#ifdef _PE_STATE_DUMP_
printk("* PLL_ON high\n");
#endif
pr_debug("* PLL_ON high\n");
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
......@@ -1797,9 +1789,7 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData, struct chan_info C
/* Write to register. number must less and equal than 16 */
Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, number, NO_INCREMENT);
#ifdef _PE_STATE_DUMP_
printk("Band changed\n");
#endif
pr_debug("Band changed\n");
}
if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
......@@ -2338,13 +2328,6 @@ void EEPROMTxVgaAdjust(struct hw_data *pHwData)
pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp * 2 / 4;
pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp * 3 / 4;
}
#ifdef _PE_STATE_DUMP_
printk(" TxVgaFor24 :\n");
DataDmp((u8 *)pHwData->TxVgaFor24, 14 , 0);
printk(" TxVgaFor50 :\n");
DataDmp((u8 *)pHwData->TxVgaFor50, 70 , 0);
#endif
}
void BBProcessor_RateChanging(struct hw_data *pHwData, u8 rate)
......
drivers/staging/winbond/sysdef.h
View file @ 2855bb79
......@@ -3,16 +3,4 @@
#ifndef SYS_DEF_H
#define SYS_DEF_H
/* debug print options, mark what debug you don't need */
#ifdef FULL_DEBUG
#define _PE_STATE_DUMP_
#define _PE_TX_DUMP_
#define _PE_RX_DUMP_
#define _PE_OID_DUMP_
#define _PE_DTO_DUMP_
#define _PE_REG_DUMP_
#define _PE_USB_INI_DUMP_
#endif
#endif
drivers/staging/winbond/wb35reg.c
View file @ 2855bb79
......@@ -150,9 +150,7 @@ unsigned char Wb35Reg_WriteSync(struct hw_data *pHwData, u16 RegisterNo, u32 Reg
Wb35Reg_EP0VM_start(pHwData);
if (ret < 0) {
#ifdef _PE_REG_DUMP_
printk("EP0 Write register usb message sending error\n");
#endif
pr_debug("EP0 Write register usb message sending error\n");
pHwData->SurpriseRemove = 1;
return false;
}
......@@ -320,9 +318,7 @@ unsigned char Wb35Reg_ReadSync(struct hw_data *pHwData, u16 RegisterNo, u32 *pRe
Wb35Reg_EP0VM_start(pHwData);
if (ret < 0) {
#ifdef _PE_REG_DUMP_
printk("EP0 Read register usb message sending error\n");
#endif
pr_debug("EP0 Read register usb message sending error\n");
pHwData->SurpriseRemove = 1;
return false;
}
......@@ -442,9 +438,7 @@ void Wb35Reg_EP0VM(struct hw_data *pHwData)
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret < 0) {
#ifdef _PE_REG_DUMP_
printk("EP0 Irp sending error\n");
#endif
pr_debug("EP0 Irp sending error\n");
goto cleanup;
}
return;
......@@ -479,9 +473,7 @@ void Wb35Reg_EP0VM_complete(struct urb *urb)
spin_unlock_irq(&reg->EP0VM_spin_lock);
if (reg->EP0VM_status) {
#ifdef _PE_REG_DUMP_
printk("EP0 IoCompleteRoutine return error\n");
#endif
pr_debug("EP0 IoCompleteRoutine return error\n");
reg->EP0vm_state = VM_STOP;
pHwData->SurpriseRemove = 1;
} else {
......@@ -526,9 +518,7 @@ void Wb35Reg_destroy(struct hw_data *pHwData)
usb_free_urb(urb);
kfree(reg_queue);
} else {
#ifdef _PE_REG_DUMP_
printk("EP0 queue release error\n");
#endif
pr_debug("EP0 queue release error\n");
}
spin_lock_irq(&reg->EP0VM_spin_lock);
......
drivers/staging/winbond/wb35rx.c
View file @ 2855bb79
......@@ -109,10 +109,7 @@ static u16 Wb35Rx_indicate(struct ieee80211_hw *hw)
/* Basic check for Rx length. Is length valid? */
if (PacketSize > MAX_PACKET_SIZE) {
#ifdef _PE_RX_DUMP_
printk("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
#endif
pr_debug("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
pWb35Rx->EP3vm_state = VM_STOP;
pWb35Rx->Ep3ErrorCount2++;
break;
......@@ -186,9 +183,7 @@ static void Wb35Rx_Complete(struct urb *urb)
/* The URB is completed, check the result */
if (pWb35Rx->EP3VM_status != 0) {
#ifdef _PE_USB_STATE_DUMP_
printk("EP3 IoCompleteRoutine return error\n");
#endif
pr_debug("EP3 IoCompleteRoutine return error\n");
pWb35Rx->EP3vm_state = VM_STOP;
goto error;
}
......@@ -249,9 +244,7 @@ static void Wb35Rx(struct ieee80211_hw *hw)
RxBufferId = pWb35Rx->RxBufferId;
if (!pWb35Rx->RxOwner[RxBufferId]) {
/* It's impossible to run here. */
#ifdef _PE_RX_DUMP_
printk("Rx driver fifo unavailable\n");
#endif
pr_debug("Rx driver fifo unavailable\n");
goto error;
}
......@@ -337,9 +330,7 @@ void Wb35Rx_stop(struct hw_data *pHwData)
/* Canceling the Irp if already sends it out. */
if (pWb35Rx->EP3vm_state == VM_RUNNING) {
usb_unlink_urb(pWb35Rx->RxUrb); /* Only use unlink, let Wb35Rx_destroy to free them */
#ifdef _PE_RX_DUMP_
printk("EP3 Rx stop\n");
#endif
pr_debug("EP3 Rx stop\n");
}
}
......@@ -355,8 +346,6 @@ void Wb35Rx_destroy(struct hw_data *pHwData)
if (pWb35Rx->RxUrb)
usb_free_urb(pWb35Rx->RxUrb);
#ifdef _PE_RX_DUMP_
printk("Wb35Rx_destroy OK\n");
#endif
pr_debug("Wb35Rx_destroy OK\n");
}
drivers/staging/winbond/wb35tx.c
View file @ 2855bb79
......@@ -153,16 +153,12 @@ void Wb35Tx_stop(struct hw_data * pHwData)
// Trying to canceling the Trp of EP2
if (pWb35Tx->EP2vm_state == VM_RUNNING)
usb_unlink_urb( pWb35Tx->Tx2Urb ); // Only use unlink, let Wb35Tx_destrot to free them
#ifdef _PE_TX_DUMP_
printk("EP2 Tx stop\n");
#endif
pr_debug("EP2 Tx stop\n");
// Trying to canceling the Irp of EP4
if (pWb35Tx->EP4vm_state == VM_RUNNING)
usb_unlink_urb( pWb35Tx->Tx4Urb ); // Only use unlink, let Wb35Tx_destrot to free them
#ifdef _PE_TX_DUMP_
printk("EP4 Tx stop\n");
#endif
pr_debug("EP4 Tx stop\n");
}
//======================================================
......@@ -182,9 +178,7 @@ void Wb35Tx_destroy(struct hw_data * pHwData)
if (pWb35Tx->Tx2Urb)
usb_free_urb( pWb35Tx->Tx2Urb );
#ifdef _PE_TX_DUMP_
printk("Wb35Tx_destroy OK\n");
#endif
pr_debug("Wb35Tx_destroy OK\n");
}
void Wb35Tx_CurrentTime(struct wbsoft_priv *adapter, u32 TimeCount)
......@@ -279,9 +273,7 @@ static void Wb35Tx_EP2VM(struct wbsoft_priv *adapter)
retv = usb_submit_urb(pUrb, GFP_ATOMIC);
if (retv < 0) {
#ifdef _PE_TX_DUMP_
printk("EP2 Tx Irp sending error\n");
#endif
pr_debug("EP2 Tx Irp sending error\n");
goto error;
}
......
drivers/staging/winbond/wbusb.c
View file @ 2855bb79
......@@ -184,10 +184,7 @@ static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info
RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */
pHwData->Channel = channel.ChanNo;
pHwData->band = channel.band;
#ifdef _PE_STATE_DUMP_
printk("Set channel is %d, band =%d\n", pHwData->Channel,
pHwData->band);
#endif
pr_debug("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band);
reg->M28_MacControl &= ~0xff; /* Clean channel information field */
reg->M28_MacControl |= channel.ChanNo;
Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl,
......@@ -728,9 +725,7 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
}
priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
#ifdef _PE_STATE_DUMP_
printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
#endif
pr_debug("Driver init, antenna no = %d\n", priv->sLocalPara.bAntennaNo);
hal_get_hw_radio_off(pHwData);
/* Waiting for HAL setting OK */
......@@ -856,9 +851,7 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
{
/* Turn off Rx and Tx hardware ability */
hal_stop(&adapter->sHwData);
#ifdef _PE_USB_INI_DUMP_
printk("[w35und] Hal_stop O.K.\n");
#endif
pr_debug("[w35und] Hal_stop O.K.\n");
/* Waiting Irp completed */
msleep(100);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7