Commit 28fd2d39 authored by Ben Dooks's avatar Ben Dooks

[ARM] S3C64XX: Set GPIO pin when select IRQ_EINT type

Set the GPIO pin mode to external interrupt when configuring
an IRQ_EINT's IRQ type.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent 20f4d6c3
......@@ -14,12 +14,15 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <plat/regs-irqtype.h>
#include <plat/regs-gpio.h>
#include <plat/gpio-cfg.h>
#include <mach/map.h>
#include <plat/cpu.h>
......@@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq)
static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
{
int offs = eint_offset(irq);
int pin;
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
......@@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
ctrl |= newvalue << shift;
__raw_writel(ctrl, reg);
/* set the GPIO pin appropriately */
if (offs < 23)
pin = S3C64XX_GPN(offs);
else
pin = S3C64XX_GPM(offs - 23);
s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment