ARM: dts: imx7: Fix memory node duplication

Boards based on imx7 have duplicate memory nodes:

- One coming from the board dts file: memory@

- One coming from the imx7s.dtsi file.

Fix the duplication by removing the memory node from the dtsi file
and by adding 'device_type = "memory";' in the board dts.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx7d-cl-som-imx7.dts

@@ -19,6 +19,7 @@ / {
 	compatible = "compulab,cl-som-imx7", "fsl,imx7d";
 
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
 	};
 
@@ -284,4 +285,4 @@ pinctrl_usbotg1: usbotg1grp {
 			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14 /* OTG PWREN */
 		>;
 	};
-};
\ No newline at end of file
+};

arch/arm/boot/dts/imx7d-colibri-emmc.dtsi

@@ -8,6 +8,7 @@
 
 / {
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
 };

arch/arm/boot/dts/imx7d-colibri.dtsi

@@ -45,6 +45,7 @@
 
 / {
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
 	};
 };

arch/arm/boot/dts/imx7d-nitrogen7.dts

@@ -12,6 +12,7 @@ / {
 	compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
 
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx7d-pico.dtsi

@@ -49,6 +49,7 @@ / {
 	compatible = "technexion,imx7d-pico", "fsl,imx7d";
 
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x80000000>;
 	};
 

arch/arm/boot/dts/imx7d-sdb.dts

@@ -15,6 +15,7 @@ chosen {
 	};
 
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x80000000>;
 	};
 

arch/arm/boot/dts/imx7s-colibri.dtsi

@@ -45,6 +45,7 @@
 
 / {
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x10000000>;
 	};
 };

arch/arm/boot/dts/imx7s-warp.dts

@@ -14,6 +14,7 @@ / {
 	compatible = "warp,imx7s-warp", "fsl,imx7s";
 
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
 	};
 

arch/arm/boot/dts/imx7s.dtsi

@@ -17,10 +17,8 @@ / {
 	 * The decompressor and also some bootloaders rely on a
 	 * pre-existing /chosen node to be available to insert the
 	 * command line and merge other ATAGS info.
-	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; };
 
 	aliases {
 		gpio0 = &gpio1;