Merge branches 'edac-i10nm' and 'edac-misc' into edac-updates-for-5.8

Signed-off-by: Borislav Petkov <bp@suse.de>

MAINTAINERS

@@ -6172,7 +6172,6 @@ M:	Yash Shah <yash.shah@sifive.com>
 L:	linux-edac@vger.kernel.org
 S:	Supported
 F:	drivers/edac/sifive_edac.c
-F:	drivers/soc/sifive_l2_cache.c
 
 EDAC-SKYLAKE
 M:	Tony Luck <tony.luck@intel.com>

drivers/edac/amd64_edac.c

@@ -3403,7 +3403,7 @@ static const struct attribute_group *amd64_edac_attr_groups[] = {
 static int hw_info_get(struct amd64_pvt *pvt)
 {
 	u16 pci_id1, pci_id2;
-	int ret = -EINVAL;
+	int ret;
 
 	if (pvt->fam >= 0x17) {
 		pvt->umc = kcalloc(fam_type->max_mcs, sizeof(struct amd64_umc), GFP_KERNEL);

drivers/edac/amd8131_edac.c

@@ -44,14 +44,6 @@ static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32)
 			" PCI Access Write Error at 0x%x\n", reg);
 }
 
-static char * const bridge_str[] = {
-	[NORTH_A] = "NORTH A",
-	[NORTH_B] = "NORTH B",
-	[SOUTH_A] = "SOUTH A",
-	[SOUTH_B] = "SOUTH B",
-	[NO_BRIDGE] = "NO BRIDGE",
-};
-
 /* Support up to two AMD8131 chipsets on a platform */
 static struct amd8131_dev_info amd8131_devices[] = {
 	{

drivers/edac/armada_xp_edac.c

@@ -78,7 +78,7 @@ struct axp_mc_drvdata {
 	char msg[128];
 };
 
-/* derived from "DRAM Address Multiplexing" in the ARAMDA XP Functional Spec */
+/* derived from "DRAM Address Multiplexing" in the ARMADA XP Functional Spec */
 static uint32_t axp_mc_calc_address(struct axp_mc_drvdata *drvdata,
 				    uint8_t cs, uint8_t bank, uint16_t row,
 				    uint16_t col)
@@ -160,12 +160,12 @@ static void axp_mc_check(struct mem_ctl_info *mci)
 		if (cnt_sbe)
 			cnt_sbe--;
 		else
-			dev_warn(mci->pdev, "inconsistent SBE count detected");
+			dev_warn(mci->pdev, "inconsistent SBE count detected\n");
 	} else {
 		if (cnt_dbe)
 			cnt_dbe--;
 		else
-			dev_warn(mci->pdev, "inconsistent DBE count detected");
+			dev_warn(mci->pdev, "inconsistent DBE count detected\n");
 	}
 
 	/* report earlier errors */
@@ -304,7 +304,7 @@ static int axp_mc_probe(struct platform_device *pdev)
 
 	config = readl(base + SDRAM_CONFIG_REG);
 	if (!(config & SDRAM_CONFIG_ECC_MASK)) {
-		dev_warn(&pdev->dev, "SDRAM ECC is not enabled");
+		dev_warn(&pdev->dev, "SDRAM ECC is not enabled\n");
 		return -EINVAL;
 	}
 
@@ -532,9 +532,9 @@ static int aurora_l2_probe(struct platform_device *pdev)
 
 	l2x0_aux_ctrl = readl(base + L2X0_AUX_CTRL);
 	if (!(l2x0_aux_ctrl & AURORA_ACR_PARITY_EN))
-		dev_warn(&pdev->dev, "tag parity is not enabled");
+		dev_warn(&pdev->dev, "tag parity is not enabled\n");
 	if (!(l2x0_aux_ctrl & AURORA_ACR_ECC_EN))
-		dev_warn(&pdev->dev, "data ECC is not enabled");
+		dev_warn(&pdev->dev, "data ECC is not enabled\n");
 
 	dci = edac_device_alloc_ctl_info(sizeof(*drvdata),
 					 "cpu", 1, "L", 1, 2, NULL, 0, 0);
@@ -618,7 +618,7 @@ static int __init armada_xp_edac_init(void)
 
 	res = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
 	if (res)
-		pr_warn("Aramda XP EDAC drivers fail to register\n");
+		pr_warn("Armada XP EDAC drivers fail to register\n");
 
 	return 0;
 }

drivers/edac/i10nm_base.c

@@ -122,10 +122,22 @@ static int i10nm_get_all_munits(void)
 	return 0;
 }
 
+static struct res_config i10nm_cfg0 = {
+	.type			= I10NM,
+	.decs_did		= 0x3452,
+	.busno_cfg_offset	= 0xcc,
+};
+
+static struct res_config i10nm_cfg1 = {
+	.type			= I10NM,
+	.decs_did		= 0x3452,
+	.busno_cfg_offset	= 0xd0,
+};
+
 static const struct x86_cpu_id i10nm_cpuids[] = {
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	NULL),
-	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		NULL),
-	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,		NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	&i10nm_cfg0),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		&i10nm_cfg0),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,		&i10nm_cfg1),
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids);
@@ -161,7 +173,7 @@ static int i10nm_get_dimm_config(struct mem_ctl_info *mci)
 				 mtr, mcddrtcfg, imc->mc, i, j);
 
 			if (IS_DIMM_PRESENT(mtr))
-				ndimms += skx_get_dimm_info(mtr, 0, dimm,
+				ndimms += skx_get_dimm_info(mtr, 0, 0, dimm,
 							    imc, i, j);
 			else if (IS_NVDIMM_PRESENT(mcddrtcfg, j))
 				ndimms += skx_get_nvdimm_info(dimm, imc, i, j,
@@ -234,6 +246,7 @@ static int __init i10nm_init(void)
 {
 	u8 mc = 0, src_id = 0, node_id = 0;
 	const struct x86_cpu_id *id;
+	struct res_config *cfg;
 	const char *owner;
 	struct skx_dev *d;
 	int rc, i, off[3] = {0xd0, 0xc8, 0xcc};
@@ -249,11 +262,17 @@ static int __init i10nm_init(void)
 	if (!id)
 		return -ENODEV;
 
+	cfg = (struct res_config *)id->driver_data;
+
+	/* Newer steppings have different offset for ATOM_TREMONT_D/ICELAKE_X */
+	if (boot_cpu_data.x86_stepping >= 4)
+		cfg->busno_cfg_offset = 0xd0;
+
 	rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm);
 	if (rc)
 		return rc;
 
-	rc = skx_get_all_bus_mappings(0x3452, 0xcc, I10NM, &i10nm_edac_list);
+	rc = skx_get_all_bus_mappings(cfg, &i10nm_edac_list);
 	if (rc < 0)
 		goto fail;
 	if (rc == 0) {

drivers/edac/skx_base.c

@@ -157,33 +157,35 @@ static int get_all_munits(const struct munit *m)
 	return -ENODEV;
 }
 
+static struct res_config skx_cfg = {
+	.type			= SKX,
+	.decs_did		= 0x2016,
+	.busno_cfg_offset	= 0xcc,
+};
+
 static const struct x86_cpu_id skx_cpuids[] = {
-	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,	&skx_cfg),
 	{ }
 };
 MODULE_DEVICE_TABLE(x86cpu, skx_cpuids);
 
-#define SKX_GET_MTMTR(dev, reg) \
-	pci_read_config_dword((dev), 0x87c, &(reg))
-
-static bool skx_check_ecc(struct pci_dev *pdev)
+static bool skx_check_ecc(u32 mcmtr)
 {
-	u32 mtmtr;
-
-	SKX_GET_MTMTR(pdev, mtmtr);
-
-	return !!GET_BITFIELD(mtmtr, 2, 2);
+	return !!GET_BITFIELD(mcmtr, 2, 2);
 }
 
 static int skx_get_dimm_config(struct mem_ctl_info *mci)
 {
 	struct skx_pvt *pvt = mci->pvt_info;
+	u32 mtr, mcmtr, amap, mcddrtcfg;
 	struct skx_imc *imc = pvt->imc;
-	u32 mtr, amap, mcddrtcfg;
 	struct dimm_info *dimm;
 	int i, j;
 	int ndimms;
 
+	/* Only the mcmtr on the first channel is effective */
+	pci_read_config_dword(imc->chan[0].cdev, 0x87c, &mcmtr);
+
 	for (i = 0; i < SKX_NUM_CHANNELS; i++) {
 		ndimms = 0;
 		pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap);
@@ -193,14 +195,14 @@ static int skx_get_dimm_config(struct mem_ctl_info *mci)
 			pci_read_config_dword(imc->chan[i].cdev,
 					      0x80 + 4 * j, &mtr);
 			if (IS_DIMM_PRESENT(mtr)) {
-				ndimms += skx_get_dimm_info(mtr, amap, dimm, imc, i, j);
+				ndimms += skx_get_dimm_info(mtr, mcmtr, amap, dimm, imc, i, j);
 			} else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) {
 				ndimms += skx_get_nvdimm_info(dimm, imc, i, j,
 							      EDAC_MOD_STR);
 				nvdimm_count++;
 			}
 		}
-		if (ndimms && !skx_check_ecc(imc->chan[0].cdev)) {
+		if (ndimms && !skx_check_ecc(mcmtr)) {
 			skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc);
 			return -ENODEV;
 		}
@@ -641,6 +643,7 @@ static inline void teardown_skx_debug(void) {}
 static int __init skx_init(void)
 {
 	const struct x86_cpu_id *id;
+	struct res_config *cfg;
 	const struct munit *m;
 	const char *owner;
 	int rc = 0, i, off[3] = {0xd0, 0xd4, 0xd8};
@@ -657,11 +660,13 @@ static int __init skx_init(void)
 	if (!id)
 		return -ENODEV;
 
+	cfg = (struct res_config *)id->driver_data;
+
 	rc = skx_get_hi_lo(0x2034, off, &skx_tolm, &skx_tohm);
 	if (rc)
 		return rc;
 
-	rc = skx_get_all_bus_mappings(0x2016, 0xcc, SKX, &skx_edac_list);
+	rc = skx_get_all_bus_mappings(cfg, &skx_edac_list);
 	if (rc < 0)
 		goto fail;
 	if (rc == 0) {

drivers/edac/skx_common.c

@@ -197,12 +197,11 @@ static int get_width(u32 mtr)
 }
 
 /*
- * We use the per-socket device @did to count how many sockets are present,
+ * We use the per-socket device @cfg->did to count how many sockets are present,
  * and to detemine which PCI buses are associated with each socket. Allocate
  * and build the full list of all the skx_dev structures that we need here.
  */
-int skx_get_all_bus_mappings(unsigned int did, int off, enum type type,
-			     struct list_head **list)
+int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list)
 {
 	struct pci_dev *pdev, *prev;
 	struct skx_dev *d;
@@ -211,7 +210,7 @@ int skx_get_all_bus_mappings(unsigned int did, int off, enum type type,
 
 	prev = NULL;
 	for (;;) {
-		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, did, prev);
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, cfg->decs_did, prev);
 		if (!pdev)
 			break;
 		ndev++;
@@ -221,7 +220,7 @@ int skx_get_all_bus_mappings(unsigned int did, int off, enum type type,
 			return -ENOMEM;
 		}
 
-		if (pci_read_config_dword(pdev, off, &reg)) {
+		if (pci_read_config_dword(pdev, cfg->busno_cfg_offset, &reg)) {
 			kfree(d);
 			pci_dev_put(pdev);
 			skx_printk(KERN_ERR, "Failed to read bus idx\n");
@@ -230,7 +229,7 @@ int skx_get_all_bus_mappings(unsigned int did, int off, enum type type,
 
 		d->bus[0] = GET_BITFIELD(reg, 0, 7);
 		d->bus[1] = GET_BITFIELD(reg, 8, 15);
-		if (type == SKX) {
+		if (cfg->type == SKX) {
 			d->seg = pci_domain_nr(pdev->bus);
 			d->bus[2] = GET_BITFIELD(reg, 16, 23);
 			d->bus[3] = GET_BITFIELD(reg, 24, 31);
@@ -304,7 +303,7 @@ static int skx_get_dimm_attr(u32 reg, int lobit, int hibit, int add,
 #define numrow(reg)	skx_get_dimm_attr(reg, 2, 4, 12, 1, 6, "rows")
 #define numcol(reg)	skx_get_dimm_attr(reg, 0, 1, 10, 0, 2, "cols")
 
-int skx_get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
+int skx_get_dimm_info(u32 mtr, u32 mcmtr, u32 amap, struct dimm_info *dimm,
 		      struct skx_imc *imc, int chan, int dimmno)
 {
 	int  banks = 16, ranks, rows, cols, npages;
@@ -324,8 +323,8 @@ int skx_get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
 		 imc->mc, chan, dimmno, size, npages,
 		 banks, 1 << ranks, rows, cols);
 
-	imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mtr, 0, 0);
-	imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mtr, 9, 9);
+	imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mcmtr, 0, 0);
+	imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mcmtr, 9, 9);
 	imc->chan[chan].dimms[dimmno].fine_grain_bank = GET_BITFIELD(amap, 0, 0);
 	imc->chan[chan].dimms[dimmno].rowbits = rows;
 	imc->chan[chan].dimms[dimmno].colbits = cols;

drivers/edac/skx_common.h

@@ -112,6 +112,14 @@ struct decoded_addr {
 	int	bank_group;
 };
 
+struct res_config {
+	enum type type;
+	/* Configuration agent device ID */
+	unsigned int decs_did;
+	/* Default bus number configuration register offset */
+	int busno_cfg_offset;
+};
+
 typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci);
 typedef bool (*skx_decode_f)(struct decoded_addr *res);
 typedef void (*skx_show_retry_log_f)(struct decoded_addr *res, char *msg, int len);
@@ -123,12 +131,11 @@ void skx_set_decode(skx_decode_f decode, skx_show_retry_log_f show_retry_log);
 int skx_get_src_id(struct skx_dev *d, int off, u8 *id);
 int skx_get_node_id(struct skx_dev *d, u8 *id);
 
-int skx_get_all_bus_mappings(unsigned int did, int off, enum type,
-			     struct list_head **list);
+int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list);
 
 int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm);
 
-int skx_get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
+int skx_get_dimm_info(u32 mtr, u32 mcmtr, u32 amap, struct dimm_info *dimm,
 		      struct skx_imc *imc, int chan, int dimmno);
 
 int skx_get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,

drivers/edac/thunderx_edac.c

@@ -1278,7 +1278,7 @@ OCX_DEBUGFS_ATTR(lne23_badcnt, OCX_LNE_BAD_CNT(23));
 
 OCX_DEBUGFS_ATTR(com_int, OCX_COM_INT_W1S);
 
-struct debugfs_entry *ocx_dfs_ents[] = {
+static struct debugfs_entry *ocx_dfs_ents[] = {
 	&debugfs_tlk0_ecc_ctl,
 	&debugfs_tlk1_ecc_ctl,
 	&debugfs_tlk2_ecc_ctl,
@@ -1919,19 +1919,19 @@ static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id)
 
 L2C_DEBUGFS_ATTR(tad_int, L2C_TAD_INT_W1S);
 
-struct debugfs_entry *l2c_tad_dfs_ents[] = {
+static struct debugfs_entry *l2c_tad_dfs_ents[] = {
 	&debugfs_tad_int,
 };
 
 L2C_DEBUGFS_ATTR(cbc_int, L2C_CBC_INT_W1S);
 
-struct debugfs_entry *l2c_cbc_dfs_ents[] = {
+static struct debugfs_entry *l2c_cbc_dfs_ents[] = {
 	&debugfs_cbc_int,
 };
 
 L2C_DEBUGFS_ATTR(mci_int, L2C_MCI_INT_W1S);
 
-struct debugfs_entry *l2c_mci_dfs_ents[] = {
+static struct debugfs_entry *l2c_mci_dfs_ents[] = {
 	&debugfs_mci_int,
 };
 

drivers/edac/xgene_edac.c

@@ -1349,7 +1349,6 @@ static int xgene_edac_l3_remove(struct xgene_edac_dev_ctx *l3)
 #define WORD_ALIGNED_ERR_MASK		BIT(28)
 #define PAGE_ACCESS_ERR_MASK		BIT(27)
 #define WRITE_ACCESS_MASK		BIT(26)
-#define RBERRADDR_RD(src)		((src) & 0x03FFFFFF)
 
 static const char * const soc_mem_err_v1[] = {
 	"10GbE0",
@@ -1483,13 +1482,11 @@ static void xgene_edac_rb_report(struct edac_device_ctl_info *edac_dev)
 		return;
 	if (reg & STICKYERR_MASK) {
 		bool write;
-		u32 address;
 
 		dev_err(edac_dev->dev, "IOB bus access error(s)\n");
 		if (regmap_read(ctx->edac->rb_map, RBEIR, &reg))
 			return;
 		write = reg & WRITE_ACCESS_MASK ? 1 : 0;
-		address = RBERRADDR_RD(reg);
 		if (reg & AGENT_OFFLINE_ERR_MASK)
 			dev_err(edac_dev->dev,
 				"IOB bus %s access to offline agent error\n",