Commit 2b067191 authored by Mark Lord's avatar Mark Lord Committed by Jeff Garzik

libata bugfix: HDIO_DRIVE_TASK

I was trying to use HDIO_DRIVE_TASK for something today,
and discovered that the libata implementation does not copy
over the upper four LBA bits from args[6].

This is serious, as any tools using this ioctl would have their
commands applied to the wrong sectors on the drive, possibly resulting
in disk corruption.

Ideally, newer apps should use SG_IO/ATA_16 directly,
avoiding this bug.  But with libata poised to displace drivers/ide,
better compatibility here is a must.

This patch fixes libata to use the upper four LBA bits passed
in from the ioctl.

The original drivers/ide implementation copies over all bits
except for the master/slave select bit.  With this patch,
libata will copy only the four high-order LBA bits,
just in case there are assumptions elsewhere in libata (?).
Signed-Off-By: default avatarMark Lord <mlord@pobox.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 909706a2
...@@ -333,6 +333,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) ...@@ -333,6 +333,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
scsi_cmd[8] = args[3]; scsi_cmd[8] = args[3];
scsi_cmd[10] = args[4]; scsi_cmd[10] = args[4];
scsi_cmd[12] = args[5]; scsi_cmd[12] = args[5];
scsi_cmd[13] = args[6] & 0x0f;
scsi_cmd[14] = args[0]; scsi_cmd[14] = args[0];
/* Good values for timeout and retries? Values below /* Good values for timeout and retries? Values below
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment