Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:

 - mailbox bindings and drivers for
     * APM X-Gene
     * Hisilicon Hi6220
     * Rockchip RK3368
   platforms

 - minor fixes to the above three drivers.

 - misc cleanups of mailbox-test driver.

* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: rockchip: avoid 64-bit division
  mailbox: rockchip: Add Rockchip mailbox driver
  dt-bindings: rockchip-mailbox: Add mailbox controller document on Rockchip SoCs
  mailbox/xgene-slimpro: Checking for IS_ERR instead of NULL
  mailbox: Hi6220: add mailbox driver
  dt-bindings: mailbox: Document Hi6220 mailbox driver
  mailbox: mailbox-test: add support for separate tx/rx buffer with single channel
  mailbox: mailbox-test: use print_hex_dump_bytes to allow dynamic printk
  mailbox: mailbox-test: fix the compatible string
  mailbox: mailbox-test: rename driver as generic test driver
  Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation
  mailbox: Add support for APM X-Gene platform mailbox driver

Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt

+Hisilicon Hi6220 Mailbox Driver
+===============================
+
+Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel
+is unidirectional with a maximum message size of 8 words. I/O is
+performed using register access (there is no DMA) and the cell
+raises an interrupt when messages are received.
+
+Mailbox Device Node:
+====================
+
+Required properties:
+--------------------
+- compatible:		Shall be "hisilicon,hi6220-mbox"
+- reg:			Contains the mailbox register address range (base
+			address and length); the first item is for IPC
+			registers, the second item is shared buffer for
+			slots.
+- #mbox-cells:		Common mailbox binding property to identify the number
+			of cells required for the mailbox specifier. Must be 3.
+			<&phandle slot_id dst_irq ack_irq>
+			  phandle: Label name of mailbox controller
+			  slot_id: Slot id used either for TX or RX
+			  dst_irq: IRQ identifier index number which used by MCU
+			  ack_irq: IRQ identifier index number with generating a
+			           TX/RX interrupt to application processor,
+				   mailbox driver uses it to acknowledge interrupt
+- interrupts:		Contains the interrupt information for the mailbox
+			device. The format is dependent on which interrupt
+			controller the SoCs use.
+
+Optional Properties:
+--------------------
+- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver
+			use this flag to ask MCU to enable "automatic idle
+			flag" mode or IRQ generated mode to acknowledge a TX
+			completion.
+
+Example:
+--------
+
+	mailbox: mailbox@f7510000 {
+		compatible = "hisilicon,hi6220-mbox";
+		reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
+		      <0x0 0x06dff800 0x0 0x0800>; /* Mailbox */
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <3>;
+	};
+
+
+Mailbox client
+===============
+
+Required properties:
+--------------------
+- compatible:		Many (See the client docs).
+- mboxes:		Standard property to specify a Mailbox (See ./mailbox.txt)
+			Cells must match 'mbox-cells' (See Mailbox Device Node above).
+
+Optional Properties:
+--------------------
+- mbox-names:		Name given to channels seen in the 'mboxes' property.
+
+Example:
+--------
+
+	stub_clock: stub_clock {
+		compatible = "hisilicon,hi6220-stub-clk";
+		hisilicon,hi6220-clk-sram = <&sram>;
+		#clock-cells = <1>;
+		mbox-names = "mbox-tx", "mbox-rx";
+		mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>;
+	};

Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt

+Rockchip mailbox
+
+The Rockchip mailbox is used by the Rockchip CPU cores to communicate
+requests to MCU processor.
+
+Refer to ./mailbox.txt for generic information about mailbox device-tree
+bindings.
+
+Required properties:
+
+ - compatible: should be one of the following.
+   - "rockchip,rk3368-mbox" for rk3368
+ - reg: physical base address of the controller and length of memory mapped
+	region.
+ - interrupts: The interrupt number to the cpu. The interrupt specifier format
+	depends on the interrupt controller.
+ - #mbox-cells: Common mailbox binding property to identify the number
+	of cells required for the mailbox specifier. Should be 1
+
+Example:
+--------
+
+/* RK3368 */
+mbox: mbox@ff6b0000 {
+	compatible = "rockchip,rk3368-mailbox";
+	reg = <0x0 0xff6b0000 0x0 0x1000>,
+	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+	#mbox-cells = <1>;
+};

Documentation/devicetree/bindings/mailbox/sti-mailbox.txt

@@ -44,7 +44,7 @@ Optional properties
 Example:
 
 mailbox_test {
-	compatible	= "mailbox_test";
+	compatible	= "mailbox-test";
 	reg		= <0x[shared_memory_address], [shared_memory_size]>;
 	mboxes		= <&mailbox2 0 1>, <&mailbox0 2 1>;
 	mbox-names	= "tx",	"rx";

Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt

+The APM X-Gene SLIMpro mailbox is used to communicate messages between
+the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple
+interrupt based door bell mechanism and can exchange simple messages using the
+internal registers.
+
+There are total of 8 interrupts in this mailbox. Each used for an individual
+door bell (or mailbox channel).
+
+Required properties:
+- compatible:	Should be as "apm,xgene-slimpro-mbox".
+
+- reg:		Contains the mailbox register address range.
+
+- interrupts:	8 interrupts must be from 0 to 7, interrupt 0 define the
+		the interrupt for mailbox channel 0 and interrupt 1 for
+		mailbox channel 1 and so likewise for the reminder.
+
+- #mbox-cells:	only one to specify the mailbox channel number.
+
+Example:
+
+Mailbox Node:
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0xa000>;
+			#mbox-cells = <1>;
+			interrupts =  	<0x0 0x0 0x4>,
+					<0x0 0x1 0x4>,
+					<0x0 0x2 0x4>,
+					<0x0 0x3 0x4>,
+					<0x0 0x4 0x4>,
+					<0x0 0x5 0x4>,
+					<0x0 0x6 0x4>,
+					<0x0 0x7 0x4>,
+		};

drivers/mailbox/Kconfig

@@ -43,6 +43,15 @@ config OMAP_MBOX_KFIFO_SIZE
 	  This can also be changed at runtime (via the mbox_kfifo_size
 	  module parameter).
 
+config ROCKCHIP_MBOX
+	bool "Rockchip Soc Intergrated Mailbox Support"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	help
+	  This driver provides support for inter-processor communication
+	  between CPU cores and MCU processor on Some Rockchip SOCs.
+	  Please check it that the Soc you use have Mailbox hardware.
+	  Say Y here if you want to use the Rockchip Mailbox support.
+
 config PCC
 	bool "Platform Communication Channel Driver"
 	depends on ACPI
@@ -78,6 +87,14 @@ config STI_MBOX
 	  Mailbox implementation for STMicroelectonics family chips with
 	  hardware for interprocessor communication.
 
+config HI6220_MBOX
+	tristate "Hi6220 Mailbox"
+	depends on ARCH_HISI
+	help
+	  An implementation of the hi6220 mailbox. It is used to send message
+	  between application processors and MCU. Say Y here if you want to
+	  build Hi6220 mailbox controller driver.
+
 config MAILBOX_TEST
 	tristate "Mailbox Test Client"
 	depends on OF
@@ -86,4 +103,13 @@ config MAILBOX_TEST
 	  Test client to help with testing new Controller driver
 	  implementations.
 
+config XGENE_SLIMPRO_MBOX
+	tristate "APM SoC X-Gene SLIMpro Mailbox Controller"
+	depends on ARCH_XGENE
+	help
+	  An implementation of the APM X-Gene Interprocessor Communication
+	  Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller.
+	  It is used to send short messages between ARM64-bit cores and
+	  the SLIMpro Management Engine, primarily for PM. Say Y here if you
+	  want to use the APM X-Gene SLIMpro IPCM support.
 endif

drivers/mailbox/Makefile

@@ -10,6 +10,8 @@ obj-$(CONFIG_PL320_MBOX)	+= pl320-ipc.o
 
 obj-$(CONFIG_OMAP2PLUS_MBOX)	+= omap-mailbox.o
 
+obj-$(CONFIG_ROCKCHIP_MBOX)	+= rockchip-mailbox.o
+
 obj-$(CONFIG_PCC)		+= pcc.o
 
 obj-$(CONFIG_ALTERA_MBOX)	+= mailbox-altera.o
@@ -17,3 +19,7 @@ obj-$(CONFIG_ALTERA_MBOX)	+= mailbox-altera.o
 obj-$(CONFIG_BCM2835_MBOX)	+= bcm2835-mailbox.o
 
 obj-$(CONFIG_STI_MBOX)		+= mailbox-sti.o
+
+obj-$(CONFIG_XGENE_SLIMPRO_MBOX) += mailbox-xgene-slimpro.o
+
+obj-$(CONFIG_HI6220_MBOX)	+= hi6220-mailbox.o

drivers/mailbox/mailbox-test.c

@@ -31,7 +31,8 @@ static struct dentry *root_debugfs_dir;
 
 struct mbox_test_device {
 	struct device		*dev;
-	void __iomem		*mmio;
+	void __iomem		*tx_mmio;
+	void __iomem		*rx_mmio;
 	struct mbox_chan	*tx_channel;
 	struct mbox_chan	*rx_channel;
 	char			*rx_buffer;
@@ -112,16 +113,16 @@ static ssize_t mbox_test_message_write(struct file *filp,
 	 * A separate signal is only of use if there is
 	 * MMIO to subsequently pass the message through
 	 */
-	if (tdev->mmio && tdev->signal) {
-		print_hex_dump(KERN_INFO, "Client: Sending: Signal: ", DUMP_PREFIX_ADDRESS,
-			       MBOX_BYTES_PER_LINE, 1, tdev->signal, MBOX_MAX_SIG_LEN, true);
+	if (tdev->tx_mmio && tdev->signal) {
+		print_hex_dump_bytes("Client: Sending: Signal: ", DUMP_PREFIX_ADDRESS,
+				     tdev->signal, MBOX_MAX_SIG_LEN);
 
 		data = tdev->signal;
 	} else
 		data = tdev->message;
 
-	print_hex_dump(KERN_INFO, "Client: Sending: Message: ", DUMP_PREFIX_ADDRESS,
-		       MBOX_BYTES_PER_LINE, 1, tdev->message, MBOX_MAX_MSG_LEN, true);
+	print_hex_dump_bytes("Client: Sending: Message: ", DUMP_PREFIX_ADDRESS,
+			     tdev->message, MBOX_MAX_MSG_LEN);
 
 	ret = mbox_send_message(tdev->tx_channel, data);
 	if (ret < 0)
@@ -220,15 +221,13 @@ static void mbox_test_receive_message(struct mbox_client *client, void *message)
 	unsigned long flags;
 
 	spin_lock_irqsave(&tdev->lock, flags);
-	if (tdev->mmio) {
-		memcpy_fromio(tdev->rx_buffer, tdev->mmio, MBOX_MAX_MSG_LEN);
-		print_hex_dump(KERN_INFO, "Client: Received [MMIO]: ",
-			       DUMP_PREFIX_ADDRESS, MBOX_BYTES_PER_LINE, 1,
-			       tdev->rx_buffer, MBOX_MAX_MSG_LEN, true);
+	if (tdev->rx_mmio) {
+		memcpy_fromio(tdev->rx_buffer, tdev->rx_mmio, MBOX_MAX_MSG_LEN);
+		print_hex_dump_bytes("Client: Received [MMIO]: ", DUMP_PREFIX_ADDRESS,
+				     tdev->rx_buffer, MBOX_MAX_MSG_LEN);
 	} else if (message) {
-		print_hex_dump(KERN_INFO, "Client: Received [API]: ",
-			       DUMP_PREFIX_ADDRESS, MBOX_BYTES_PER_LINE, 1,
-			       message, MBOX_MAX_MSG_LEN, true);
+		print_hex_dump_bytes("Client: Received [API]: ", DUMP_PREFIX_ADDRESS,
+				     message, MBOX_MAX_MSG_LEN);
 		memcpy(tdev->rx_buffer, message, MBOX_MAX_MSG_LEN);
 	}
 	spin_unlock_irqrestore(&tdev->lock, flags);
@@ -238,11 +237,11 @@ static void mbox_test_prepare_message(struct mbox_client *client, void *message)
 {
 	struct mbox_test_device *tdev = dev_get_drvdata(client->dev);
 
-	if (tdev->mmio) {
+	if (tdev->tx_mmio) {
 		if (tdev->signal)
-			memcpy_toio(tdev->mmio, tdev->message, MBOX_MAX_MSG_LEN);
+			memcpy_toio(tdev->tx_mmio, tdev->message, MBOX_MAX_MSG_LEN);
 		else
-			memcpy_toio(tdev->mmio, message, MBOX_MAX_MSG_LEN);
+			memcpy_toio(tdev->tx_mmio, message, MBOX_MAX_MSG_LEN);
 	}
 }
 
@@ -296,9 +295,15 @@ static int mbox_test_probe(struct platform_device *pdev)
 
 	/* It's okay for MMIO to be NULL */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	tdev->mmio = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(tdev->mmio))
-		tdev->mmio = NULL;
+	tdev->tx_mmio = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(tdev->tx_mmio))
+		tdev->tx_mmio = NULL;
+
+	/* If specified, second reg entry is Rx MMIO */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	tdev->rx_mmio = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(tdev->rx_mmio))
+		tdev->rx_mmio = tdev->tx_mmio;
 
 	tdev->tx_channel = mbox_test_request_channel(pdev, "tx");
 	tdev->rx_channel = mbox_test_request_channel(pdev, "rx");
@@ -306,6 +311,10 @@ static int mbox_test_probe(struct platform_device *pdev)
 	if (!tdev->tx_channel && !tdev->rx_channel)
 		return -EPROBE_DEFER;
 
+	/* If Rx is not specified but has Rx MMIO, then Rx = Tx */
+	if (!tdev->rx_channel && (tdev->rx_mmio != tdev->tx_mmio))
+		tdev->rx_channel = tdev->tx_channel;
+
 	tdev->dev = &pdev->dev;
 	platform_set_drvdata(pdev, tdev);
 
@@ -342,13 +351,13 @@ static int mbox_test_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id mbox_test_match[] = {
-	{ .compatible = "mailbox_test" },
+	{ .compatible = "mailbox-test" },
 	{},
 };
 
 static struct platform_driver mbox_test_driver = {
 	.driver = {
-		.name = "mailbox_sti_test",
+		.name = "mailbox_test",
 		.of_match_table = mbox_test_match,
 	},
 	.probe  = mbox_test_probe,

drivers/mailbox/mailbox-xgene-slimpro.c

+/*
+ * APM X-Gene SLIMpro MailBox Driver
+ *
+ * Copyright (c) 2015, Applied Micro Circuits Corporation
+ * Author: Feng Kan fkan@apm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define MBOX_CON_NAME			"slimpro-mbox"
+#define MBOX_REG_SET_OFFSET		0x1000
+#define MBOX_CNT			8
+#define MBOX_STATUS_AVAIL_MASK		BIT(16)
+#define MBOX_STATUS_ACK_MASK		BIT(0)
+
+/* Configuration and Status Registers */
+#define REG_DB_IN		0x00
+#define REG_DB_DIN0		0x04
+#define REG_DB_DIN1		0x08
+#define REG_DB_OUT		0x10
+#define REG_DB_DOUT0		0x14
+#define REG_DB_DOUT1		0x18
+#define REG_DB_STAT		0x20
+#define REG_DB_STATMASK		0x24
+
+/**
+ * X-Gene SlimPRO mailbox channel information
+ *
+ * @dev:	Device to which it is attached
+ * @chan:	Pointer to mailbox communication channel
+ * @reg:	Base address to access channel registers
+ * @irq:	Interrupt number of the channel
+ * @rx_msg:	Received message storage
+ */
+struct slimpro_mbox_chan {
+	struct device		*dev;
+	struct mbox_chan	*chan;
+	void __iomem		*reg;
+	int			irq;
+	u32			rx_msg[3];
+};
+
+/**
+ * X-Gene SlimPRO Mailbox controller data
+ *
+ * X-Gene SlimPRO Mailbox controller has 8 commnunication channels.
+ * Each channel has a separate IRQ number assgined to it.
+ *
+ * @mb_ctrl:	Representation of the commnunication channel controller
+ * @mc:		Array of SlimPRO mailbox channels of the controller
+ * @chans:	Array of mailbox communication channels
+ *
+ */
+struct slimpro_mbox {
+	struct mbox_controller		mb_ctrl;
+	struct slimpro_mbox_chan	mc[MBOX_CNT];
+	struct mbox_chan		chans[MBOX_CNT];
+};
+
+static void mb_chan_send_msg(struct slimpro_mbox_chan *mb_chan, u32 *msg)
+{
+	writel(msg[1], mb_chan->reg + REG_DB_DOUT0);
+	writel(msg[2], mb_chan->reg + REG_DB_DOUT1);
+	writel(msg[0], mb_chan->reg + REG_DB_OUT);
+}
+
+static void mb_chan_recv_msg(struct slimpro_mbox_chan *mb_chan)
+{
+	mb_chan->rx_msg[1] = readl(mb_chan->reg + REG_DB_DIN0);
+	mb_chan->rx_msg[2] = readl(mb_chan->reg + REG_DB_DIN1);
+	mb_chan->rx_msg[0] = readl(mb_chan->reg + REG_DB_IN);
+}
+
+static int mb_chan_status_ack(struct slimpro_mbox_chan *mb_chan)
+{
+	u32 val = readl(mb_chan->reg + REG_DB_STAT);
+
+	if (val & MBOX_STATUS_ACK_MASK) {
+		writel(MBOX_STATUS_ACK_MASK, mb_chan->reg + REG_DB_STAT);
+		return 1;
+	}
+	return 0;
+}
+
+static int mb_chan_status_avail(struct slimpro_mbox_chan *mb_chan)
+{
+	u32 val = readl(mb_chan->reg + REG_DB_STAT);
+
+	if (val & MBOX_STATUS_AVAIL_MASK) {
+		mb_chan_recv_msg(mb_chan);
+		writel(MBOX_STATUS_AVAIL_MASK, mb_chan->reg + REG_DB_STAT);
+		return 1;
+	}
+	return 0;
+}
+
+static irqreturn_t slimpro_mbox_irq(int irq, void *id)
+{
+	struct slimpro_mbox_chan *mb_chan = id;
+
+	if (mb_chan_status_ack(mb_chan))
+		mbox_chan_txdone(mb_chan->chan, 0);
+
+	if (mb_chan_status_avail(mb_chan))
+		mbox_chan_received_data(mb_chan->chan, mb_chan->rx_msg);
+
+	return IRQ_HANDLED;
+}
+
+static int slimpro_mbox_send_data(struct mbox_chan *chan, void *msg)
+{
+	struct slimpro_mbox_chan *mb_chan = chan->con_priv;
+
+	mb_chan_send_msg(mb_chan, msg);
+	return 0;
+}
+
+static int slimpro_mbox_startup(struct mbox_chan *chan)
+{
+	struct slimpro_mbox_chan *mb_chan = chan->con_priv;
+	int rc;
+	u32 val;
+
+	rc = devm_request_irq(mb_chan->dev, mb_chan->irq, slimpro_mbox_irq, 0,
+			      MBOX_CON_NAME, mb_chan);
+	if (unlikely(rc)) {
+		dev_err(mb_chan->dev, "failed to register mailbox interrupt %d\n",
+			mb_chan->irq);
+		return rc;
+	}
+
+	/* Enable HW interrupt */
+	writel(MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK,
+	       mb_chan->reg + REG_DB_STAT);
+	/* Unmask doorbell status interrupt */
+	val = readl(mb_chan->reg + REG_DB_STATMASK);
+	val &= ~(MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK);
+	writel(val, mb_chan->reg + REG_DB_STATMASK);
+
+	return 0;
+}
+
+static void slimpro_mbox_shutdown(struct mbox_chan *chan)
+{
+	struct slimpro_mbox_chan *mb_chan = chan->con_priv;
+	u32 val;
+
+	/* Mask doorbell status interrupt */
+	val = readl(mb_chan->reg + REG_DB_STATMASK);
+	val |= (MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK);
+	writel(val, mb_chan->reg + REG_DB_STATMASK);
+
+	devm_free_irq(mb_chan->dev, mb_chan->irq, mb_chan);
+}
+
+static struct mbox_chan_ops slimpro_mbox_ops = {
+	.send_data = slimpro_mbox_send_data,
+	.startup = slimpro_mbox_startup,
+	.shutdown = slimpro_mbox_shutdown,
+};
+
+static int slimpro_mbox_probe(struct platform_device *pdev)
+{
+	struct slimpro_mbox *ctx;
+	struct resource *regs;
+	void __iomem *mb_base;
+	int rc;
+	int i;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(struct slimpro_mbox), GFP_KERNEL);
+	if (IS_ERR(ctx))
+		return PTR_ERR(ctx);
+
+	platform_set_drvdata(pdev, ctx);
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mb_base = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+	if (!mb_base)
+		return -ENOMEM;
+
+	/* Setup mailbox links */
+	for (i = 0; i < MBOX_CNT; i++) {
+		ctx->mc[i].irq = platform_get_irq(pdev, i);
+		if (ctx->mc[i].irq < 0) {
+			if (i == 0) {
+				dev_err(&pdev->dev, "no available IRQ\n");
+				return -EINVAL;
+			}
+			dev_info(&pdev->dev, "no IRQ for channel %d\n", i);
+			break;
+		}
+
+		ctx->mc[i].dev = &pdev->dev;
+		ctx->mc[i].reg = mb_base + i * MBOX_REG_SET_OFFSET;
+		ctx->mc[i].chan = &ctx->chans[i];
+		ctx->chans[i].con_priv = &ctx->mc[i];
+	}
+
+	/* Setup mailbox controller */
+	ctx->mb_ctrl.dev = &pdev->dev;
+	ctx->mb_ctrl.chans = ctx->chans;
+	ctx->mb_ctrl.txdone_irq = true;
+	ctx->mb_ctrl.ops = &slimpro_mbox_ops;
+	ctx->mb_ctrl.num_chans = i;
+
+	rc = mbox_controller_register(&ctx->mb_ctrl);
+	if (rc) {
+		dev_err(&pdev->dev,
+			"APM X-Gene SLIMpro MailBox register failed:%d\n", rc);
+		return rc;
+	}
+
+	dev_info(&pdev->dev, "APM X-Gene SLIMpro MailBox registered\n");
+	return 0;
+}
+
+static int slimpro_mbox_remove(struct platform_device *pdev)
+{
+	struct slimpro_mbox *smb = platform_get_drvdata(pdev);
+
+	mbox_controller_unregister(&smb->mb_ctrl);
+	return 0;
+}
+
+static const struct of_device_id slimpro_of_match[] = {
+	{.compatible = "apm,xgene-slimpro-mbox" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, slimpro_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id slimpro_acpi_ids[] = {
+	{"APMC0D01", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, slimpro_acpi_ids);
+#endif
+
+static struct platform_driver slimpro_mbox_driver = {
+	.probe	= slimpro_mbox_probe,
+	.remove = slimpro_mbox_remove,
+	.driver	= {
+		.name = "xgene-slimpro-mbox",
+		.of_match_table = of_match_ptr(slimpro_of_match),
+		.acpi_match_table = ACPI_PTR(slimpro_acpi_ids)
+	},
+};
+
+static int __init slimpro_mbox_init(void)
+{
+	return platform_driver_register(&slimpro_mbox_driver);
+}
+
+static void __exit slimpro_mbox_exit(void)
+{
+	platform_driver_unregister(&slimpro_mbox_driver);
+}
+
+subsys_initcall(slimpro_mbox_init);
+module_exit(slimpro_mbox_exit);
+
+MODULE_DESCRIPTION("APM X-Gene SLIMpro Mailbox Driver");
+MODULE_LICENSE("GPL");

drivers/mailbox/rockchip-mailbox.c

+/*
+ * Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define MAILBOX_A2B_INTEN		0x00
+#define MAILBOX_A2B_STATUS		0x04
+#define MAILBOX_A2B_CMD(x)		(0x08 + (x) * 8)
+#define MAILBOX_A2B_DAT(x)		(0x0c + (x) * 8)
+
+#define MAILBOX_B2A_INTEN		0x28
+#define MAILBOX_B2A_STATUS		0x2C
+#define MAILBOX_B2A_CMD(x)		(0x30 + (x) * 8)
+#define MAILBOX_B2A_DAT(x)		(0x34 + (x) * 8)
+
+struct rockchip_mbox_msg {
+	u32 cmd;
+	int rx_size;
+};
+
+struct rockchip_mbox_data {
+	int num_chans;
+};
+
+struct rockchip_mbox_chan {
+	int idx;
+	int irq;
+	struct rockchip_mbox_msg *msg;
+	struct rockchip_mbox *mb;
+};
+
+struct rockchip_mbox {
+	struct mbox_controller mbox;
+	struct clk *pclk;
+	void __iomem *mbox_base;
+
+	/* The maximum size of buf for each channel */
+	u32 buf_size;
+
+	struct rockchip_mbox_chan *chans;
+};
+
+static int rockchip_mbox_send_data(struct mbox_chan *chan, void *data)
+{
+	struct rockchip_mbox *mb = dev_get_drvdata(chan->mbox->dev);
+	struct rockchip_mbox_msg *msg = data;
+	struct rockchip_mbox_chan *chans = mb->chans;
+
+	if (!msg)
+		return -EINVAL;
+
+	if (msg->rx_size > mb->buf_size) {
+		dev_err(mb->mbox.dev, "Transmit size over buf size(%d)\n",
+			mb->buf_size);
+		return -EINVAL;
+	}
+
+	dev_dbg(mb->mbox.dev, "Chan[%d]: A2B message, cmd 0x%08x\n",
+		chans->idx, msg->cmd);
+
+	mb->chans[chans->idx].msg = msg;
+
+	writel_relaxed(msg->cmd, mb->mbox_base + MAILBOX_A2B_CMD(chans->idx));
+	writel_relaxed(msg->rx_size, mb->mbox_base +
+		       MAILBOX_A2B_DAT(chans->idx));
+
+	return 0;
+}
+
+static int rockchip_mbox_startup(struct mbox_chan *chan)
+{
+	struct rockchip_mbox *mb = dev_get_drvdata(chan->mbox->dev);
+
+	/* Enable all B2A interrupts */
+	writel_relaxed((1 << mb->mbox.num_chans) - 1,
+		       mb->mbox_base + MAILBOX_B2A_INTEN);
+
+	return 0;
+}
+
+static void rockchip_mbox_shutdown(struct mbox_chan *chan)
+{
+	struct rockchip_mbox *mb = dev_get_drvdata(chan->mbox->dev);
+	struct rockchip_mbox_chan *chans = mb->chans;
+
+	/* Disable all B2A interrupts */
+	writel_relaxed(0, mb->mbox_base + MAILBOX_B2A_INTEN);
+
+	mb->chans[chans->idx].msg = NULL;
+}
+
+static const struct mbox_chan_ops rockchip_mbox_chan_ops = {
+	.send_data	= rockchip_mbox_send_data,
+	.startup	= rockchip_mbox_startup,
+	.shutdown	= rockchip_mbox_shutdown,
+};
+
+static irqreturn_t rockchip_mbox_irq(int irq, void *dev_id)
+{
+	int idx;
+	struct rockchip_mbox *mb = (struct rockchip_mbox *)dev_id;
+	u32 status = readl_relaxed(mb->mbox_base + MAILBOX_B2A_STATUS);
+
+	for (idx = 0; idx < mb->mbox.num_chans; idx++) {
+		if ((status & (1 << idx)) && (irq == mb->chans[idx].irq)) {
+			/* Clear mbox interrupt */
+			writel_relaxed(1 << idx,
+				       mb->mbox_base + MAILBOX_B2A_STATUS);
+			return IRQ_WAKE_THREAD;
+		}
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t rockchip_mbox_isr(int irq, void *dev_id)
+{
+	int idx;
+	struct rockchip_mbox_msg *msg = NULL;
+	struct rockchip_mbox *mb = (struct rockchip_mbox *)dev_id;
+
+	for (idx = 0; idx < mb->mbox.num_chans; idx++) {
+		if (irq != mb->chans[idx].irq)
+			continue;
+
+		msg = mb->chans[idx].msg;
+		if (!msg) {
+			dev_err(mb->mbox.dev,
+				"Chan[%d]: B2A message is NULL\n", idx);
+			break; /* spurious */
+		}
+
+		mbox_chan_received_data(&mb->mbox.chans[idx], msg);
+		mb->chans[idx].msg = NULL;
+
+		dev_dbg(mb->mbox.dev, "Chan[%d]: B2A message, cmd 0x%08x\n",
+			idx, msg->cmd);
+
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static const struct rockchip_mbox_data rk3368_drv_data = {
+	.num_chans = 4,
+};
+
+static const struct of_device_id rockchip_mbox_of_match[] = {
+	{ .compatible = "rockchip,rk3368-mailbox", .data = &rk3368_drv_data},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchp_mbox_of_match);
+
+static int rockchip_mbox_probe(struct platform_device *pdev)
+{
+	struct rockchip_mbox *mb;
+	const struct of_device_id *match;
+	const struct rockchip_mbox_data *drv_data;
+	struct resource *res;
+	int ret, irq, i;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	match = of_match_node(rockchip_mbox_of_match, pdev->dev.of_node);
+	drv_data = (const struct rockchip_mbox_data *)match->data;
+
+	mb = devm_kzalloc(&pdev->dev, sizeof(*mb), GFP_KERNEL);
+	if (!mb)
+		return -ENOMEM;
+
+	mb->chans = devm_kcalloc(&pdev->dev, drv_data->num_chans,
+				 sizeof(*mb->chans), GFP_KERNEL);
+	if (!mb->chans)
+		return -ENOMEM;
+
+	mb->mbox.chans = devm_kcalloc(&pdev->dev, drv_data->num_chans,
+				      sizeof(*mb->mbox.chans), GFP_KERNEL);
+	if (!mb->mbox.chans)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mb);
+
+	mb->mbox.dev = &pdev->dev;
+	mb->mbox.num_chans = drv_data->num_chans;
+	mb->mbox.ops = &rockchip_mbox_chan_ops;
+	mb->mbox.txdone_irq = true;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	mb->mbox_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mb->mbox_base))
+		return PTR_ERR(mb->mbox_base);
+
+	/* Each channel has two buffers for A2B and B2A */
+	mb->buf_size = (size_t)resource_size(res) / (drv_data->num_chans * 2);
+
+	mb->pclk = devm_clk_get(&pdev->dev, "pclk_mailbox");
+	if (IS_ERR(mb->pclk)) {
+		ret = PTR_ERR(mb->pclk);
+		dev_err(&pdev->dev, "failed to get pclk_mailbox clock: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(mb->pclk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable pclk: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < mb->mbox.num_chans; i++) {
+		irq = platform_get_irq(pdev, i);
+		if (irq < 0)
+			return irq;
+
+		ret = devm_request_threaded_irq(&pdev->dev, irq,
+						rockchip_mbox_irq,
+						rockchip_mbox_isr, IRQF_ONESHOT,
+						dev_name(&pdev->dev), mb);
+		if (ret < 0)
+			return ret;
+
+		mb->chans[i].idx = i;
+		mb->chans[i].irq = irq;
+		mb->chans[i].mb = mb;
+		mb->chans[i].msg = NULL;
+	}
+
+	ret = mbox_controller_register(&mb->mbox);
+	if (ret < 0)
+		dev_err(&pdev->dev, "Failed to register mailbox: %d\n", ret);
+
+	return ret;
+}
+
+static int rockchip_mbox_remove(struct platform_device *pdev)
+{
+	struct rockchip_mbox *mb = platform_get_drvdata(pdev);
+
+	if (!mb)
+		return -EINVAL;
+
+	mbox_controller_unregister(&mb->mbox);
+
+	return 0;
+}
+
+static struct platform_driver rockchip_mbox_driver = {
+	.probe	= rockchip_mbox_probe,
+	.remove	= rockchip_mbox_remove,
+	.driver = {
+		.name = "rockchip-mailbox",
+		.of_match_table = of_match_ptr(rockchip_mbox_of_match),
+	},
+};
+
+module_platform_driver(rockchip_mbox_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Rockchip mailbox: communicate between CPU cores and MCU");
+MODULE_AUTHOR("Addy Ke <addy.ke@rock-chips.com>");
+MODULE_AUTHOR("Caesar Wang <wxt@rock-chips.com>");