Merge tag 'renesas-arm64-dt-for-v4.19' of...

Merge tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.19

* All applicable R-Car Gen 3 SoCs
  - Correct VSPD registers range
  - Convert R-Car Gen3 SoC and board DT files to SPDX identifiers

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
  - Salvator-X and Salvator-XS boards
    + Describe HSCIF1 device
    + Correct I2C ch4 clock to 400kHz
  - Salvator-X, Salvator-XS and ULCB boards
    + Add sdhi2_ds pin group to SDHI2 pinctrl groups

* R-Car H3 (r8a7795) SoC
  - Describe CryptoCAL (CCREE) device

* R-Car M3-W (r8a7796) SoC
  - Describe PCIe devices
  - Describe HSCIF nodes

* R-Car M3-N (r8a77965) SoC
  - Describe PCIe devices
  - Use CPG MSSR symbols instead of numeric indicies

* R-Car D3 (r8a77995) SoC
  - Describe Thermal device
  - Describe MSIOF devices
  - Add power domains to description of IPMMU devices
  - Do not use deprecated renesas,gpio-rcar compat string
  - Describe HDMI and CVBS input in DT of R-Car Gen3 D3 Draak board

* R-Car V3H (r8a77980) SoC
  - Describe secondary CA53 CPU cores, and GPIO and
    interconected FCPVD0, VSPD0, DU, and LVDS0 devices
  - Enable ethernet on V3HSK board
  - Specify Ethernet PHY IRQs in the DT of the Condor and V3HSK boards.
    This is possible now that GPIO support is present.
    Previously phylib had to resort to polling.
  - Enable I2C0 on Condor board

* R-Car E3 (r8a77990)
  - Enable Watchdog timer and USB2.0 host on Ebisu board
  - Enable secondary CA53 CPU core

* tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
  arm64: dts: renesas: r8a77995: Add MSIOF device nodes
  arm64: dts: renesas: salvator-common: Add HSCIF1 device support
  arm64: dts: renesas: r8a77980: add FCPVD/VSPD/DU/LVDS support
  arm64: dts: renesas: condor/v3hsk: specify Ethernet PHY IRQs
  arm64: dts: renesas: r8a77965: Add PCIe device nodes
  arm64: dts: renesas: Fix VSPD registers range
  arm64: dts: renesas: convert to SPDX identifiers
  arm64: dts: renesas: r8a77980: add GPIO support
  arm64: dts: renesas: r8a77990: Enable USB2.0 Host for Ebisu board
  arm64: dts: renesas: r8a7796: Add PCIe device nodes
  arm64: dts: renesas: r8a77990: Add secondary CA53 CPU core
  arm64: dts: renesas: r8a77990: ebisu: Enable watchdog timer
  arm64: dts: renesas: condor: add I2C0 support
  arm64: dts: renesas: r8a77980: add I2C support
  arm64: dts: renesas: salvator-x(s): Update I2C ch4 clock to 400kHz
  arm64: dts: renesas: Add sdhi2_ds pin group to SDHI2 pinctrl groups
  arm64: dts: renesas: r8a77965: Add all HSCIF nodes
  arm64: dts: renesas: r8a77965: Use r8a77965-cpg-mssr binding definitions
  arm64: dts: renesas: r8a7795: add ccree to device tree
  arm64: dts: renesas: r8a77965: Add Watchdog Timer controller node using RCLK Watchdog Timer
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB Kingfisher board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7795-es1-h3ulcb.dts"

arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7795 ES1.x SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7795.dtsi"
@@ -80,7 +77,7 @@ fcpvi2: fcp@fe9cf000 {
 
 	vspd3: vsp@fea38000 {
 		compatible = "renesas,vsp2";
-		reg = <0 0xfea38000 0 0x8000>;
+		reg = <0 0xfea38000 0 0x5000>;
 		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cpg CPG_MOD 620>;
 		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;

arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB Kingfisher board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7795-h3ulcb.dts"

arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a7795.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7795 SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
@@ -528,6 +525,15 @@ i2c2: i2c@e6510000 {
 			status = "disabled";
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
 		i2c3: i2c@e66d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -2530,7 +2536,7 @@ vspbc: vsp@fe920000 {
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2541,7 +2547,7 @@ vspd0: vsp@fea20000 {
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2552,7 +2558,7 @@ vspd1: vsp@fea28000 {
 
 		vspd2: vsp@fea30000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea30000 0 0x8000>;
+			reg = <0 0xfea30000 0 0x5000>;
 			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 621>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;

arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the M3ULCB Kingfisher board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7796-m3ulcb.dts"

arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board with R-Car M3-W
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a7796.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7796 SoC
  *
- * Copyright (C) 2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
  */
 
 #include <dt-bindings/clock/r8a7796-cpg-mssr.h>
@@ -2108,13 +2105,57 @@ gic: interrupt-controller@f1010000 {
 		};
 
 		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xfe000000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
 		};
 
 		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xee800000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
 		};
 
 		imr-lx4@fe860000 {
@@ -2212,7 +2253,7 @@ vspb: vsp@fe960000 {
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2223,7 +2264,7 @@ vspd0: vsp@fea20000 {
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2234,7 +2275,7 @@ vspd1: vsp@fea28000 {
 
 		vspd2: vsp@fea30000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea30000 0 0x8000>;
+			reg = <0 0xfea30000 0 0x5000>;
 			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 621>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;

arch/arm64/boot/dts/renesas/r8a77965.dtsi

@@ -139,8 +139,13 @@ soc {
 		ranges;
 
 		wdt0: watchdog@e6020000 {
+			compatible = "renesas,r8a77965-wdt",
+				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
 		};
 
 		gpio0: gpio@e6050000 {
@@ -451,6 +456,94 @@ i2c_dvfs: i2c@e60b0000 {
 			status = "disabled";
 		};
 
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
 		hsusb: usb@e6590000 {
 			compatible = "renesas,usbhs-r8a7796",
 				     "renesas,rcar-gen3-usbhs";
@@ -732,7 +825,7 @@ scif0: serial@e6e60000 {
 			reg = <0 0xe6e60000 0 64>;
 			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 207>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
@@ -749,7 +842,7 @@ scif1: serial@e6e68000 {
 			reg = <0 0xe6e68000 0 64>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 206>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
@@ -766,7 +859,7 @@ scif2: serial@e6e88000 {
 			reg = <0 0xe6e88000 0 64>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 310>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -780,7 +873,7 @@ scif3: serial@e6c50000 {
 			reg = <0 0xe6c50000 0 64>;
 			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 204>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
@@ -796,7 +889,7 @@ scif4: serial@e6c40000 {
 			reg = <0 0xe6c40000 0 64>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 203>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
@@ -812,7 +905,7 @@ scif5: serial@e6f30000 {
 			reg = <0 0xe6f30000 0 64>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 202>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
@@ -1340,13 +1433,57 @@ gic: interrupt-controller@f1010000 {
 		};
 
 		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xfe000000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
 		};
 
 		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xee800000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
 		};
 
 		fcpf0: fcp@fe950000 {
@@ -1397,7 +1534,7 @@ fcpvi0: fcp@fe9af000 {
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -1416,7 +1553,7 @@ fcpvd0: fcp@fea27000 {
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;

arch/arm64/boot/dts/renesas/r8a77970-eagle.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Eagle board
  *
  * Copyright (C) 2016-2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the V3M Starter Kit board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/renesas/r8a77970.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a77970 SoC
  *
  * Copyright (C) 2016-2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a77970-cpg-mssr.h>
@@ -776,7 +773,7 @@ gic: interrupt-controller@f1010000 {
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;

arch/arm64/boot/dts/renesas/r8a77980-condor.dts

@@ -59,6 +59,8 @@ &avb {
 	phy0: ethernet-phy@0 {
 		rxc-skew-ps = <1500>;
 		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -80,6 +82,28 @@ &extalr_clk {
 	clock-frequency = <32768>;
 };
 
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander0: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander1: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &mmc0 {
 	pinctrl-0 = <&mmc_pins>;
 	pinctrl-1 = <&mmc_pins_uhs>;
@@ -104,6 +128,11 @@ canfd0_pins: canfd0 {
 		function = "canfd0";
 	};
 
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
 	mmc_pins: mmc {
 		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
 		function = "mmc";

arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts

@@ -15,6 +15,7 @@ / {
 
 	aliases {
 		serial0 = &scif0;
+		ethernet0 = &gether;
 	};
 
 	chosen {
@@ -36,7 +37,29 @@ &extalr_clk {
 	clock-frequency = <32768>;
 };
 
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &pfc {
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";

arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts

@@ -47,10 +47,18 @@ phy0: ethernet-phy@0 {
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <48000000>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pfc {
 	avb_pins: avb {
 		mux {
@@ -58,8 +66,25 @@ mux {
 			function = "avb";
 		};
 	};
+
+	usb0_pins: usb {
+		groups = "usb0_b";
+		function = "usb0";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
 };
 
 &scif2 {
 	status = "okay";
 };
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};

arch/arm64/boot/dts/renesas/r8a77990.dtsi

@@ -17,16 +17,24 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* 1 core only at this point */
 		a53_0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0>;
+			reg = <0>;
 			device_type = "cpu";
 			power-domains = <&sysc 5>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
 		};
 
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc 6>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
 		L2_CA53: cache-controller-0 {
 			compatible = "cache";
 			power-domains = <&sysc 21>;
@@ -44,8 +52,9 @@ extal_clk: extal {
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&a53_0>;
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
 	};
 
 	psci {
@@ -60,6 +69,16 @@ soc: soc {
 		#size-cells = <2>;
 		ranges;
 
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77990-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77990",
 				     "renesas,rcar-gen3-gpio";
@@ -248,6 +267,43 @@ scif2: serial@e6e88000 {
 			status = "disabled";
 		};
 
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77990",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 703>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -258,7 +314,7 @@ gic: interrupt-controller@f1010000 {
 			      <0x0 0xf1040000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x20000>;
 			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
 			power-domains = <&sysc 32>;
@@ -273,9 +329,9 @@ prr: chipid@fff00044 {
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };

arch/arm64/boot/dts/renesas/r8a77995-draak.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Draak board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2017 Glider bvba
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -59,6 +56,27 @@ adv7123_out: endpoint {
 		};
 	};
 
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
@@ -82,6 +100,12 @@ reg_3p3v: regulator1 {
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -142,6 +166,11 @@ usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
 	};
+
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
 };
 
 &i2c0 {
@@ -154,6 +183,77 @@ eeprom@50 {
 		reg = <0x50>;
 		pagesize = <8>;
 	};
+
+	composite-in@20 {
+		compatible = "adi,adv7180cp";
+		reg = <0x20>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7180_in: endpoint {
+					remote-endpoint = <&composite_con_in>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, link it to
+				 * VIN4 here.
+				 */
+				adv7180_out: endpoint {
+					remote-endpoint = <&vin4_in>;
+				};
+			};
+		};
+
+	};
+
+	hdmi-decoder@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, leave HDMI
+				 * not connected here.
+				 */
+				adv7612_out: endpoint {
+					pclk-sample = <0>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -167,6 +267,11 @@ &du {
 	pinctrl-names = "default";
 	status = "okay";
 
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x12_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
 	ports {
 		port@0 {
 			endpoint {
@@ -246,3 +351,23 @@ &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
+
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
+};

arch/arm64/boot/dts/renesas/r8a77995.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a77995 SoC
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2017 Glider bvba
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a77995-cpg-mssr.h>
@@ -88,8 +85,7 @@ rwdt: watchdog@e6020000 {
 
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6050000 0 0x50>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -104,8 +100,7 @@ gpio0: gpio@e6050000 {
 
 		gpio1: gpio@e6051000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6051000 0 0x50>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -120,8 +115,7 @@ gpio1: gpio@e6051000 {
 
 		gpio2: gpio@e6052000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6052000 0 0x50>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -136,8 +130,7 @@ gpio2: gpio@e6052000 {
 
 		gpio3: gpio@e6053000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6053000 0 0x50>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -152,8 +145,7 @@ gpio3: gpio@e6053000 {
 
 		gpio4: gpio@e6054000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6054000 0 0x50>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -168,8 +160,7 @@ gpio4: gpio@e6054000 {
 
 		gpio5: gpio@e6055000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055000 0 0x50>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -184,8 +175,7 @@ gpio5: gpio@e6055000 {
 
 		gpio6: gpio@e6055400 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055400 0 0x50>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -224,6 +214,18 @@ sysc: system-controller@e6180000 {
 			#power-domain-cells = <1>;
 		};
 
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77995";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		intc_ex: interrupt-controller@e61c0000 {
 			compatible = "renesas,intc-ex-r8a77995", "renesas,irqc";
 			#interrupt-cells = <2>;
@@ -408,6 +410,7 @@ ipmmu_ds0: mmu@e6740000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -415,6 +418,7 @@ ipmmu_ds1: mmu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -422,6 +426,7 @@ ipmmu_hc: mmu@e6570000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -430,6 +435,7 @@ ipmmu_mm: mmu@e67b0000 {
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -437,6 +443,7 @@ ipmmu_mp: mmu@ec670000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -444,6 +451,7 @@ ipmmu_pv0: mmu@fd800000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -451,6 +459,7 @@ ipmmu_rt: mmu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -458,6 +467,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -465,6 +475,7 @@ ipmmu_vi0: mmu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -472,6 +483,7 @@ ipmmu_vp0: mmu@fe990000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -610,6 +622,68 @@ scif2: serial@e6e88000 {
 			status = "disabled";
 		};
 
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x64>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x64>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x64>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		vin4: video@e6ef4000 {
 			compatible = "renesas,vin-r8a77995";
 			reg = <0 0xe6ef4000 0 0x1000>;
@@ -699,7 +773,7 @@ vspbs: vsp@fe960000 {
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -709,7 +783,7 @@ vspd0: vsp@fea20000 {
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -785,6 +859,25 @@ prr: chipid@fff00044 {
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,

arch/arm64/boot/dts/renesas/salvator-common.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for common parts of Salvator-X board variants
  *
  * Copyright (C) 2015-2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
@@ -341,6 +338,15 @@ &extalr_clk {
 	clock-frequency = <32768>;
 };
 
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
+	/* status = "okay"; */
+};
+
 &hsusb {
 	dr_mode = "otg";
 	status = "okay";
@@ -546,6 +552,11 @@ du_pins: du {
 		function = "du";
 	};
 
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
 	i2c2_pins: i2c2 {
 		groups = "i2c2_a";
 		function = "i2c2";
@@ -589,13 +600,13 @@ sdhi0_pins_uhs: sd0_uhs {
 	};
 
 	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <3300>;
 	};
 
 	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <1800>;
 	};
@@ -711,6 +722,7 @@ &scif1 {
 	pinctrl-names = "default";
 
 	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
 	status = "okay";
 };
 

arch/arm64/boot/dts/renesas/salvator-x.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board
  *
  * Copyright (C) 2015-2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "salvator-common.dtsi"
@@ -20,6 +17,8 @@ &extal_clk {
 };
 
 &i2c4 {
+	clock-frequency = <400000>;
+
 	versaclock5: clock-generator@6a {
 		compatible = "idt,5p49v5923";
 		reg = <0x6a>;

arch/arm64/boot/dts/renesas/salvator-xs.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X 2nd version board
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "salvator-common.dtsi"
@@ -20,6 +17,8 @@ &extal_clk {
 };
 
 &i2c4 {
+	clock-frequency = <400000>;
+
 	versaclock6: clock-generator@6a {
 		compatible = "idt,5p49v6901";
 		reg = <0x6a>;

arch/arm64/boot/dts/renesas/ulcb-kf.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Kingfisher (ULCB extension) board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 / {

arch/arm64/boot/dts/renesas/ulcb.dtsi

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the R-Car Gen3 ULCB board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -330,13 +327,13 @@ sdhi0_pins_uhs: sd0_uhs {
 	};
 
 	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <3300>;
 	};
 
 	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <1800>;
 	};