Commit 2ce73c02 authored by Sujith Manoharan's avatar Sujith Manoharan Committed by John W. Linville

ath9k: Fix p2p address management

When multiple channel contexts are enabled, a p2p interface
that is assigned to a context will have an address that
is different from the device mac address, which is used
by wpa_s as the p2p device ID.

Certain frames like provision requests use the device address
and these get dropped since ath9k_calculate_summary_state()
iterates over only the active interfaces in a context and the
device address is not used.

Fix this by adding the device mac address to the bssid mask.
Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent fbf01990
...@@ -354,6 +354,7 @@ struct ath_chanctx { ...@@ -354,6 +354,7 @@ struct ath_chanctx {
bool switch_after_beacon; bool switch_after_beacon;
short nvifs; short nvifs;
short nvifs_assigned;
unsigned int rxfilter; unsigned int rxfilter;
}; };
......
...@@ -940,6 +940,34 @@ static void ath9k_vif_iter(struct ath9k_vif_iter_data *iter_data, ...@@ -940,6 +940,34 @@ static void ath9k_vif_iter(struct ath9k_vif_iter_data *iter_data,
} }
} }
static void ath9k_update_bssid_mask(struct ath_softc *sc,
struct ath_chanctx *ctx,
struct ath9k_vif_iter_data *iter_data)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_vif *avp;
int i;
if (!ath9k_is_chanctx_enabled())
return;
list_for_each_entry(avp, &ctx->vifs, list) {
if (ctx->nvifs_assigned != 1)
continue;
if (!avp->vif->p2p || !iter_data->has_hw_macaddr)
continue;
ether_addr_copy(common->curbssid, avp->bssid);
/* perm_addr will be used as the p2p device address. */
for (i = 0; i < ETH_ALEN; i++)
iter_data->mask[i] &=
~(iter_data->hw_macaddr[i] ^
sc->hw->wiphy->perm_addr[i]);
}
}
/* Called with sc->mutex held. */ /* Called with sc->mutex held. */
void ath9k_calculate_iter_data(struct ath_softc *sc, void ath9k_calculate_iter_data(struct ath_softc *sc,
struct ath_chanctx *ctx, struct ath_chanctx *ctx,
...@@ -958,6 +986,8 @@ void ath9k_calculate_iter_data(struct ath_softc *sc, ...@@ -958,6 +986,8 @@ void ath9k_calculate_iter_data(struct ath_softc *sc,
list_for_each_entry(avp, &ctx->vifs, list) list_for_each_entry(avp, &ctx->vifs, list)
ath9k_vif_iter(iter_data, avp->vif->addr, avp->vif); ath9k_vif_iter(iter_data, avp->vif->addr, avp->vif);
ath9k_update_bssid_mask(sc, ctx, iter_data);
} }
static void ath9k_set_assoc_state(struct ath_softc *sc, static void ath9k_set_assoc_state(struct ath_softc *sc,
...@@ -1122,6 +1152,10 @@ void ath9k_calculate_summary_state(struct ath_softc *sc, ...@@ -1122,6 +1152,10 @@ void ath9k_calculate_summary_state(struct ath_softc *sc,
else else
clear_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags); clear_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags);
ath_dbg(common, CONFIG,
"macaddr: %pM, bssid: %pM, bssidmask: %pM\n",
common->macaddr, common->curbssid, common->bssidmask);
ath9k_ps_restore(sc); ath9k_ps_restore(sc);
} }
...@@ -2356,6 +2390,7 @@ static int ath9k_assign_vif_chanctx(struct ieee80211_hw *hw, ...@@ -2356,6 +2390,7 @@ static int ath9k_assign_vif_chanctx(struct ieee80211_hw *hw,
conf->def.chan->center_freq); conf->def.chan->center_freq);
avp->chanctx = ctx; avp->chanctx = ctx;
ctx->nvifs_assigned++;
list_add_tail(&avp->list, &ctx->vifs); list_add_tail(&avp->list, &ctx->vifs);
ath9k_calculate_summary_state(sc, ctx); ath9k_calculate_summary_state(sc, ctx);
for (i = 0; i < IEEE80211_NUM_ACS; i++) for (i = 0; i < IEEE80211_NUM_ACS; i++)
...@@ -2384,6 +2419,7 @@ static void ath9k_unassign_vif_chanctx(struct ieee80211_hw *hw, ...@@ -2384,6 +2419,7 @@ static void ath9k_unassign_vif_chanctx(struct ieee80211_hw *hw,
conf->def.chan->center_freq); conf->def.chan->center_freq);
avp->chanctx = NULL; avp->chanctx = NULL;
ctx->nvifs_assigned--;
list_del(&avp->list); list_del(&avp->list);
ath9k_calculate_summary_state(sc, ctx); ath9k_calculate_summary_state(sc, ctx);
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment