drm/i915: Do not use {HAS_*, IS_*, INTEL_INFO}(dev_priv->dev)

dev_priv is what the macro works hard to extract, pass it directly.

> sed 's/\([A-Z].*(dev_priv\)->dev)/\1)/g'

v2:
- Include all wrapper macros too (Chris)

v3:
- Include sed cmdline (Chris)

v4:
- Break long line
- Rebase

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460016485-8089-1-git-send-email-joonas.lahtinen@linux.intel.com

drivers/gpu/drm/i915/i915_debugfs.c

@@ -2415,7 +2415,7 @@ static int i915_guc_load_status_info(struct seq_file *m, void *data)
 	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
 	u32 tmp, i;
 
-	if (!HAS_GUC_UCODE(dev_priv->dev))
+	if (!HAS_GUC_UCODE(dev_priv))
 		return 0;
 
 	seq_printf(m, "GuC firmware status:\n");
@@ -2489,7 +2489,7 @@ static int i915_guc_info(struct seq_file *m, void *data)
 	struct intel_engine_cs *engine;
 	u64 total = 0;
 
-	if (!HAS_GUC_SCHED(dev_priv->dev))
+	if (!HAS_GUC_SCHED(dev_priv))
 		return 0;
 
 	if (mutex_lock_interruptible(&dev->struct_mutex))

drivers/gpu/drm/i915/i915_drv.c

@@ -1400,7 +1400,7 @@ static int vlv_suspend_complete(struct drm_i915_private *dev_priv)
 	if (err)
 		goto err2;
 
-	if (!IS_CHERRYVIEW(dev_priv->dev))
+	if (!IS_CHERRYVIEW(dev_priv))
 		vlv_save_gunit_s0ix_state(dev_priv);
 
 	err = vlv_force_gfx_clock(dev_priv, false);
@@ -1432,7 +1432,7 @@ static int vlv_resume_prepare(struct drm_i915_private *dev_priv,
 	 */
 	ret = vlv_force_gfx_clock(dev_priv, true);
 
-	if (!IS_CHERRYVIEW(dev_priv->dev))
+	if (!IS_CHERRYVIEW(dev_priv))
 		vlv_restore_gunit_s0ix_state(dev_priv);
 
 	err = vlv_allow_gt_wake(dev_priv, true);

drivers/gpu/drm/i915/i915_gem_gtt.c

@@ -2306,7 +2306,7 @@ void i915_check_and_clear_faults(struct drm_device *dev)
 
 static void i915_ggtt_flush(struct drm_i915_private *dev_priv)
 {
-	if (INTEL_INFO(dev_priv->dev)->gen < 6) {
+	if (INTEL_INFO(dev_priv)->gen < 6) {
 		intel_gtt_chipset_flush();
 	} else {
 		I915_WRITE(GFX_FLSH_CNTL_GEN6, GFX_FLSH_CNTL_EN);
@@ -2977,7 +2977,7 @@ static void bdw_setup_private_ppat(struct drm_i915_private *dev_priv)
 	      GEN8_PPAT(6, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(2)) |
 	      GEN8_PPAT(7, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(3));
 
-	if (!USES_PPGTT(dev_priv->dev))
+	if (!USES_PPGTT(dev_priv))
 		/* Spec: "For GGTT, there is NO pat_sel[2:0] from the entry,
 		 * so RTL will always use the value corresponding to
 		 * pat_sel = 000".

drivers/gpu/drm/i915/i915_gpu_error.c

@@ -669,7 +669,8 @@ i915_error_object_create(struct drm_i915_private *dev_priv,
 	}
 
 	/* Cannot access snooped pages through the aperture */
-	if (use_ggtt && src->cache_level != I915_CACHE_NONE && !HAS_LLC(dev_priv->dev))
+	if (use_ggtt && src->cache_level != I915_CACHE_NONE &&
+	    !HAS_LLC(dev_priv))
 		goto unwind;
 
 	dst->page_count = num_pages;
@@ -884,7 +885,7 @@ static void gen6_record_semaphore_state(struct drm_i915_private *dev_priv,
 	ering->semaphore_seqno[0] = engine->semaphore.sync_seqno[0];
 	ering->semaphore_seqno[1] = engine->semaphore.sync_seqno[1];
 
-	if (HAS_VEBOX(dev_priv->dev)) {
+	if (HAS_VEBOX(dev_priv)) {
 		ering->semaphore_mboxes[2] =
 			I915_READ(RING_SYNC_2(engine->mmio_base));
 		ering->semaphore_seqno[2] = engine->semaphore.sync_seqno[2];
@@ -1051,7 +1052,7 @@ static void i915_gem_record_rings(struct drm_device *dev,
 							 request->batch_obj,
 							 vm);
 
-			if (HAS_BROKEN_CS_TLB(dev_priv->dev))
+			if (HAS_BROKEN_CS_TLB(dev_priv))
 				error->ring[i].wa_batchbuffer =
 					i915_error_ggtt_object_create(dev_priv,
 							     engine->scratch.obj);

drivers/gpu/drm/i915/i915_irq.c

@@ -1218,7 +1218,7 @@ static void ivybridge_parity_work(struct work_struct *work)
 		i915_reg_t reg;
 
 		slice--;
-		if (WARN_ON_ONCE(slice >= NUM_L3_SLICES(dev_priv->dev)))
+		if (WARN_ON_ONCE(slice >= NUM_L3_SLICES(dev_priv)))
 			break;
 
 		dev_priv->l3_parity.which_slice &= ~(1<<slice);
@@ -1257,7 +1257,7 @@ static void ivybridge_parity_work(struct work_struct *work)
 out:
 	WARN_ON(dev_priv->l3_parity.which_slice);
 	spin_lock_irq(&dev_priv->irq_lock);
-	gen5_enable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv->dev));
+	gen5_enable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv));
 	spin_unlock_irq(&dev_priv->irq_lock);
 
 	mutex_unlock(&dev_priv->dev->struct_mutex);
@@ -1626,7 +1626,7 @@ static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir)
 	if (INTEL_INFO(dev_priv)->gen >= 8)
 		return;
 
-	if (HAS_VEBOX(dev_priv->dev)) {
+	if (HAS_VEBOX(dev_priv)) {
 		if (pm_iir & PM_VEBOX_USER_INTERRUPT)
 			notify_ring(&dev_priv->engine[VECS]);
 
@@ -2828,7 +2828,7 @@ semaphore_wait_to_signaller_ring(struct intel_engine_cs *engine, u32 ipehr,
 	struct drm_i915_private *dev_priv = engine->dev->dev_private;
 	struct intel_engine_cs *signaller;
 
-	if (INTEL_INFO(dev_priv->dev)->gen >= 8) {
+	if (INTEL_INFO(dev_priv)->gen >= 8) {
 		for_each_engine(signaller, dev_priv) {
 			if (engine == signaller)
 				continue;

drivers/gpu/drm/i915/intel_audio.c

@@ -373,7 +373,7 @@ static void ilk_audio_codec_disable(struct intel_encoder *encoder)
 	if (WARN_ON(port == PORT_A))
 		return;
 
-	if (HAS_PCH_IBX(dev_priv->dev)) {
+	if (HAS_PCH_IBX(dev_priv)) {
 		aud_config = IBX_AUD_CFG(pipe);
 		aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {

drivers/gpu/drm/i915/intel_display.c

@@ -1167,7 +1167,7 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
 	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 								      pipe);
 
-	if (HAS_DDI(dev_priv->dev)) {
+	if (HAS_DDI(dev_priv)) {
 		/* DDI does not have a specific FDI_TX register */
 		u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
 		cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
@@ -1203,11 +1203,11 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
 	u32 val;
 
 	/* ILK FDI PLL is always enabled */
-	if (INTEL_INFO(dev_priv->dev)->gen == 5)
+	if (INTEL_INFO(dev_priv)->gen == 5)
 		return;
 
 	/* On Haswell, DDI ports are responsible for the FDI PLL setup */
-	if (HAS_DDI(dev_priv->dev))
+	if (HAS_DDI(dev_priv))
 		return;
 
 	val = I915_READ(FDI_TX_CTL(pipe));
@@ -1415,11 +1415,11 @@ static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
 	if ((val & DP_PORT_EN) == 0)
 		return false;
 
-	if (HAS_PCH_CPT(dev_priv->dev)) {
+	if (HAS_PCH_CPT(dev_priv)) {
 		u32 trans_dp_ctl = I915_READ(TRANS_DP_CTL(pipe));
 		if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
 			return false;
-	} else if (IS_CHERRYVIEW(dev_priv->dev)) {
+	} else if (IS_CHERRYVIEW(dev_priv)) {
 		if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
 			return false;
 	} else {
@@ -1435,10 +1435,10 @@ static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
 	if ((val & SDVO_ENABLE) == 0)
 		return false;
 
-	if (HAS_PCH_CPT(dev_priv->dev)) {
+	if (HAS_PCH_CPT(dev_priv)) {
 		if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
 			return false;
-	} else if (IS_CHERRYVIEW(dev_priv->dev)) {
+	} else if (IS_CHERRYVIEW(dev_priv)) {
 		if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
 			return false;
 	} else {
@@ -1454,7 +1454,7 @@ static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
 	if ((val & LVDS_PORT_EN) == 0)
 		return false;
 
-	if (HAS_PCH_CPT(dev_priv->dev)) {
+	if (HAS_PCH_CPT(dev_priv)) {
 		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
 			return false;
 	} else {
@@ -1469,7 +1469,7 @@ static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
 {
 	if ((val & ADPA_DAC_ENABLE) == 0)
 		return false;
-	if (HAS_PCH_CPT(dev_priv->dev)) {
+	if (HAS_PCH_CPT(dev_priv)) {
 		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
 			return false;
 	} else {
@@ -1488,7 +1488,7 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
 	     "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
 	     i915_mmio_reg_offset(reg), pipe_name(pipe));
 
-	I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
+	I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && (val & DP_PORT_EN) == 0
 	     && (val & DP_PIPEB_SELECT),
 	     "IBX PCH dp port still using transcoder B\n");
 }
@@ -1501,7 +1501,7 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
 	     "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
 	     i915_mmio_reg_offset(reg), pipe_name(pipe));
 
-	I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
+	I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && (val & SDVO_ENABLE) == 0
 	     && (val & SDVO_PIPE_B_SELECT),
 	     "IBX PCH hdmi port still using transcoder B\n");
 }
@@ -1826,7 +1826,7 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
 	val = I915_READ(reg);
 	pipeconf_val = I915_READ(PIPECONF(pipe));
 
-	if (HAS_PCH_IBX(dev_priv->dev)) {
+	if (HAS_PCH_IBX(dev_priv)) {
 		/*
 		 * Make the BPC in transcoder be consistent with
 		 * that in pipeconf reg. For HDMI we must use 8bpc
@@ -1841,7 +1841,7 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
 
 	val &= ~TRANS_INTERLACE_MASK;
 	if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
-		if (HAS_PCH_IBX(dev_priv->dev) &&
+		if (HAS_PCH_IBX(dev_priv) &&
 		    intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
 			val |= TRANS_LEGACY_INTERLACED_ILK;
 		else
@@ -1953,7 +1953,7 @@ static void intel_enable_pipe(struct intel_crtc *crtc)
 	assert_cursor_disabled(dev_priv, pipe);
 	assert_sprites_disabled(dev_priv, pipe);
 
-	if (HAS_PCH_LPT(dev_priv->dev))
+	if (HAS_PCH_LPT(dev_priv))
 		pch_transcoder = TRANSCODER_A;
 	else
 		pch_transcoder = pipe;
@@ -1963,7 +1963,7 @@ static void intel_enable_pipe(struct intel_crtc *crtc)
 	 * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
 	 * need the check.
 	 */
-	if (HAS_GMCH_DISPLAY(dev_priv->dev))
+	if (HAS_GMCH_DISPLAY(dev_priv))
 		if (crtc->config->has_dsi_encoder)
 			assert_dsi_pll_enabled(dev_priv);
 		else
@@ -6501,7 +6501,7 @@ static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return false;
 
 	/* HSW can handle pixel rate up to cdclk? */
-	if (IS_HASWELL(dev_priv->dev))
+	if (IS_HASWELL(dev_priv))
 		return true;
 
 	/*
@@ -9265,7 +9265,7 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 
 		ironlake_get_fdi_m_n_config(crtc, pipe_config);
 
-		if (HAS_PCH_IBX(dev_priv->dev)) {
+		if (HAS_PCH_IBX(dev_priv)) {
 			pll_id = (enum intel_dpll_id) crtc->pipe;
 		} else {
 			tmp = I915_READ(PCH_DPLL_SEL);
@@ -16174,7 +16174,7 @@ intel_display_capture_error_state(struct drm_device *dev)
 
 	/* Note: this does not include DSI transcoders. */
 	error->num_transcoders = INTEL_INFO(dev)->num_pipes;
-	if (HAS_DDI(dev_priv->dev))
+	if (HAS_DDI(dev_priv))
 		error->num_transcoders++; /* Account for eDP. */
 
 	for (i = 0; i < error->num_transcoders; i++) {

drivers/gpu/drm/i915/intel_dpll_mgr.c

@@ -298,7 +298,7 @@ static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
 	u32 val;
 	bool enabled;
 
-	I915_STATE_WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
+	I915_STATE_WARN_ON(!(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)));
 
 	val = I915_READ(PCH_DREF_CONTROL);
 	enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |

drivers/gpu/drm/i915/intel_fifo_underrun.c

@@ -333,7 +333,7 @@ bool intel_set_pch_fifo_underrun_reporting(struct drm_i915_private *dev_priv,
 	old = !intel_crtc->pch_fifo_underrun_disabled;
 	intel_crtc->pch_fifo_underrun_disabled = !enable;
 
-	if (HAS_PCH_IBX(dev_priv->dev))
+	if (HAS_PCH_IBX(dev_priv))
 		ibx_set_fifo_underrun_reporting(dev_priv->dev, pch_transcoder,
 						enable);
 	else
@@ -363,7 +363,7 @@ void intel_cpu_fifo_underrun_irq_handler(struct drm_i915_private *dev_priv,
 		return;
 
 	/* GMCH can't disable fifo underruns, filter them. */
-	if (HAS_GMCH_DISPLAY(dev_priv->dev) &&
+	if (HAS_GMCH_DISPLAY(dev_priv) &&
 	    to_intel_crtc(crtc)->cpu_fifo_underrun_disabled)
 		return;
 

drivers/gpu/drm/i915/intel_hdmi.c

@@ -638,7 +638,7 @@ static bool intel_hdmi_set_gcp_infoframe(struct drm_encoder *encoder)
 		reg = HSW_TVIDEO_DIP_GCP(crtc->config->cpu_transcoder);
 	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
 		reg = VLV_TVIDEO_DIP_GCP(crtc->pipe);
-	else if (HAS_PCH_SPLIT(dev_priv->dev))
+	else if (HAS_PCH_SPLIT(dev_priv))
 		reg = TVIDEO_DIP_GCP(crtc->pipe);
 	else
 		return false;

drivers/gpu/drm/i915/intel_i2c.c

@@ -124,7 +124,7 @@ static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)
 	u32 val;
 
 	/* When using bit bashing for I2C, this bit needs to be set to 1 */
-	if (!IS_PINEVIEW(dev_priv->dev))
+	if (!IS_PINEVIEW(dev_priv))
 		return;
 
 	val = I915_READ(DSPCLK_GATE_D);
@@ -264,7 +264,7 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
 	u32 gmbus2 = 0;
 	DEFINE_WAIT(wait);
 
-	if (!HAS_GMBUS_IRQ(dev_priv->dev))
+	if (!HAS_GMBUS_IRQ(dev_priv))
 		gmbus4_irq_en = 0;
 
 	/* Important: The hw handles only the first bit, so set only one! Since
@@ -300,7 +300,7 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv)
 
 #define C ((I915_READ_NOTRACE(GMBUS2) & GMBUS_ACTIVE) == 0)
 
-	if (!HAS_GMBUS_IRQ(dev_priv->dev))
+	if (!HAS_GMBUS_IRQ(dev_priv))
 		return wait_for(C, 10);
 
 	/* Important: The hw handles only the first bit, so set only one! */

drivers/gpu/drm/i915/intel_pm.c

@@ -4302,7 +4302,7 @@ static u32 intel_rps_limits(struct drm_i915_private *dev_priv, u8 val)
 	 * the hw runs at the minimal clock before selecting the desired
 	 * frequency, if the down threshold expires in that window we will not
 	 * receive a down interrupt. */
-	if (IS_GEN9(dev_priv->dev)) {
+	if (IS_GEN9(dev_priv)) {
 		limits = (dev_priv->rps.max_freq_softlimit) << 23;
 		if (val <= dev_priv->rps.min_freq_softlimit)
 			limits |= (dev_priv->rps.min_freq_softlimit) << 14;
@@ -7340,12 +7340,12 @@ static int chv_freq_opcode(struct drm_i915_private *dev_priv, int val)
 
 int intel_gpu_freq(struct drm_i915_private *dev_priv, int val)
 {
-	if (IS_GEN9(dev_priv->dev))
+	if (IS_GEN9(dev_priv))
 		return DIV_ROUND_CLOSEST(val * GT_FREQUENCY_MULTIPLIER,
 					 GEN9_FREQ_SCALER);
-	else if (IS_CHERRYVIEW(dev_priv->dev))
+	else if (IS_CHERRYVIEW(dev_priv))
 		return chv_gpu_freq(dev_priv, val);
-	else if (IS_VALLEYVIEW(dev_priv->dev))
+	else if (IS_VALLEYVIEW(dev_priv))
 		return byt_gpu_freq(dev_priv, val);
 	else
 		return val * GT_FREQUENCY_MULTIPLIER;
@@ -7353,12 +7353,12 @@ int intel_gpu_freq(struct drm_i915_private *dev_priv, int val)
 
 int intel_freq_opcode(struct drm_i915_private *dev_priv, int val)
 {
-	if (IS_GEN9(dev_priv->dev))
+	if (IS_GEN9(dev_priv))
 		return DIV_ROUND_CLOSEST(val * GEN9_FREQ_SCALER,
 					 GT_FREQUENCY_MULTIPLIER);
-	else if (IS_CHERRYVIEW(dev_priv->dev))
+	else if (IS_CHERRYVIEW(dev_priv))
 		return chv_freq_opcode(dev_priv, val);
-	else if (IS_VALLEYVIEW(dev_priv->dev))
+	else if (IS_VALLEYVIEW(dev_priv))
 		return byt_freq_opcode(dev_priv, val);
 	else
 		return DIV_ROUND_CLOSEST(val, GT_FREQUENCY_MULTIPLIER);

drivers/gpu/drm/i915/intel_psr.c

@@ -563,7 +563,7 @@ static void intel_psr_work(struct work_struct *work)
 	 * PSR might take some time to get fully disabled
 	 * and be ready for re-enable.
 	 */
-	if (HAS_DDI(dev_priv->dev)) {
+	if (HAS_DDI(dev_priv)) {
 		if (wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
 			      EDP_PSR_STATUS_STATE_MASK) == 0, 50)) {
 			DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");

drivers/gpu/drm/i915/intel_runtime_pm.c

@@ -2039,17 +2039,17 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
 	 * The enabling order will be from lower to higher indexed wells,
 	 * the disabling order is reversed.
 	 */
-	if (IS_HASWELL(dev_priv->dev)) {
+	if (IS_HASWELL(dev_priv)) {
 		set_power_wells(power_domains, hsw_power_wells);
-	} else if (IS_BROADWELL(dev_priv->dev)) {
+	} else if (IS_BROADWELL(dev_priv)) {
 		set_power_wells(power_domains, bdw_power_wells);
-	} else if (IS_SKYLAKE(dev_priv->dev) || IS_KABYLAKE(dev_priv->dev)) {
+	} else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
 		set_power_wells(power_domains, skl_power_wells);
-	} else if (IS_BROXTON(dev_priv->dev)) {
+	} else if (IS_BROXTON(dev_priv)) {
 		set_power_wells(power_domains, bxt_power_wells);
-	} else if (IS_CHERRYVIEW(dev_priv->dev)) {
+	} else if (IS_CHERRYVIEW(dev_priv)) {
 		set_power_wells(power_domains, chv_power_wells);
-	} else if (IS_VALLEYVIEW(dev_priv->dev)) {
+	} else if (IS_VALLEYVIEW(dev_priv)) {
 		set_power_wells(power_domains, vlv_power_wells);
 	} else {
 		set_power_wells(power_domains, i9xx_always_on_power_well);

drivers/gpu/drm/i915/intel_uncore.c

@@ -204,7 +204,7 @@ static int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
 
 	/* On VLV, FIFO will be shared by both SW and HW.
 	 * So, we need to read the FREE_ENTRIES everytime */
-	if (IS_VALLEYVIEW(dev_priv->dev))
+	if (IS_VALLEYVIEW(dev_priv))
 		dev_priv->uncore.fifo_count = fifo_free_entries(dev_priv);
 
 	if (dev_priv->uncore.fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES) {
@@ -1161,7 +1161,7 @@ static void intel_uncore_fw_domains_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (INTEL_INFO(dev_priv->dev)->gen <= 5)
+	if (INTEL_INFO(dev_priv)->gen <= 5)
 		return;
 
 	if (IS_GEN9(dev)) {