Commit 2d85a713 authored by Kumar Gala's avatar Kumar Gala Committed by Mike Turquette

clk: qcom: Add basic support for APQ8064 global clock controller clocks

The APQ8064 and MSM8960 share a significant amount of clock data and
code between the two SoCs.  Rather than duplicating the data we just add
support for a unqiue APQ8064 clock table into the MSM8960 code.

For now add just enough clocks to get a basic serial port going on an
APQ8064 device.
Signed-off-by: default avatarKumar Gala <galak@codeaurora.org>
Reviewed-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: trivial conflict due to missing ipq8064 support]
parent 49fc825f
...@@ -4,6 +4,7 @@ Qualcomm Global Clock & Reset Controller Binding ...@@ -4,6 +4,7 @@ Qualcomm Global Clock & Reset Controller Binding
Required properties : Required properties :
- compatible : shall contain only one of the following: - compatible : shall contain only one of the following:
"qcom,gcc-apq8064"
"qcom,gcc-msm8660" "qcom,gcc-msm8660"
"qcom,gcc-msm8960" "qcom,gcc-msm8960"
"qcom,gcc-msm8974" "qcom,gcc-msm8974"
......
...@@ -13,10 +13,10 @@ config MSM_GCC_8660 ...@@ -13,10 +13,10 @@ config MSM_GCC_8660
i2c, USB, SD/eMMC, etc. i2c, USB, SD/eMMC, etc.
config MSM_GCC_8960 config MSM_GCC_8960
tristate "MSM8960 Global Clock Controller" tristate "APQ8064/MSM8960 Global Clock Controller"
depends on COMMON_CLK_QCOM depends on COMMON_CLK_QCOM
help help
Support for the global clock controller on msm8960 devices. Support for the global clock controller on apq8064/msm8960 devices.
Say Y if you want to use peripheral devices such as UART, SPI, Say Y if you want to use peripheral devices such as UART, SPI,
i2c, USB, SD/eMMC, SATA, PCIe, etc. i2c, USB, SD/eMMC, SATA, PCIe, etc.
......
/* /*
* Copyright (c) 2013, The Linux Foundation. All rights reserved. * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
* *
* This software is licensed under the terms of the GNU General Public * This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and * License version 2, as published by the Free Software Foundation, and
...@@ -2868,6 +2868,16 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = { ...@@ -2868,6 +2868,16 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
[RIVA_RESET] = { 0x35e0 }, [RIVA_RESET] = { 0x35e0 },
}; };
static struct clk_regmap *gcc_apq8064_clks[] = {
[PLL8] = &pll8.clkr,
[PLL8_VOTE] = &pll8_vote,
[GSBI7_UART_SRC] = &gsbi7_uart_src.clkr,
[GSBI7_UART_CLK] = &gsbi7_uart_clk.clkr,
[GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr,
[GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr,
[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
};
static const struct regmap_config gcc_msm8960_regmap_config = { static const struct regmap_config gcc_msm8960_regmap_config = {
.reg_bits = 32, .reg_bits = 32,
.reg_stride = 4, .reg_stride = 4,
...@@ -2884,8 +2894,17 @@ static const struct qcom_cc_desc gcc_msm8960_desc = { ...@@ -2884,8 +2894,17 @@ static const struct qcom_cc_desc gcc_msm8960_desc = {
.num_resets = ARRAY_SIZE(gcc_msm8960_resets), .num_resets = ARRAY_SIZE(gcc_msm8960_resets),
}; };
static const struct qcom_cc_desc gcc_apq8064_desc = {
.config = &gcc_msm8960_regmap_config,
.clks = gcc_apq8064_clks,
.num_clks = ARRAY_SIZE(gcc_apq8064_clks),
.resets = gcc_msm8960_resets,
.num_resets = ARRAY_SIZE(gcc_msm8960_resets),
};
static const struct of_device_id gcc_msm8960_match_table[] = { static const struct of_device_id gcc_msm8960_match_table[] = {
{ .compatible = "qcom,gcc-msm8960" }, { .compatible = "qcom,gcc-msm8960", .data = &gcc_msm8960_desc },
{ .compatible = "qcom,gcc-apq8064", .data = &gcc_apq8064_desc },
{ } { }
}; };
MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table); MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table);
...@@ -2894,6 +2913,11 @@ static int gcc_msm8960_probe(struct platform_device *pdev) ...@@ -2894,6 +2913,11 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
{ {
struct clk *clk; struct clk *clk;
struct device *dev = &pdev->dev; struct device *dev = &pdev->dev;
const struct of_device_id *match;
match = of_match_device(gcc_msm8960_match_table, &pdev->dev);
if (!match)
return -EINVAL;
/* Temporary until RPM clocks supported */ /* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000); clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
...@@ -2904,7 +2928,7 @@ static int gcc_msm8960_probe(struct platform_device *pdev) ...@@ -2904,7 +2928,7 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
if (IS_ERR(clk)) if (IS_ERR(clk))
return PTR_ERR(clk); return PTR_ERR(clk);
return qcom_cc_probe(pdev, &gcc_msm8960_desc); return qcom_cc_probe(pdev, match->data);
} }
static int gcc_msm8960_remove(struct platform_device *pdev) static int gcc_msm8960_remove(struct platform_device *pdev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment